- 23 May, 2024 30 commits
-
-
Miri Korenblit authored
Start supporting API version 91 for new devices. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.27c00099e8b7.I99b4f24bba073414dd04a6e04a359c7fbba52990@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Miri Korenblit authored
This is needed for debugging. Signed-off-by:
-
Miri Korenblit authored
The exiting code is checking the SMPS mode of deflink. Use the SMPS mode of the link_sta function parameter. Signed-off-by:
-
Miri Korenblit authored
This needs to be set only if the FW is not capable of selecting an antenna on its own. Signed-off-by:
-
Chaya Rachel Ivgi authored
The driver reads xtal_calib from NVM file, but actually never uses it. This is only used in dvm driver. Signed-off-by:
Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
fw_running assumes that memory can be retrieved only after alive. This assumption is no longer true as we support dump before alive. To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED bit in trans status is set before dumping instead of the prior check. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Andrei Otcheretianski authored
These flags are not needed on 6 GHz channels, and anyway they were set incorrectly. This in turn resulted in alternating channel flags, preventing reg domain rules to be merged together, so cfg80211 couldn't even send them to the user space, as the regulatory domain was too large. Fix it. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by:
-
Miri Korenblit authored
The driver needs to call this function when the A-MSDU size changes. Signed-off-by:
-
Miri Korenblit authored
The existing code sets the max A-MSDU size to the deflink, set it on the given link instead. Signed-off-by:
-
Miri Korenblit authored
The link_sta pointer is now only used inside this if, so define it inside its scope. Signed-off-by:
-
Avraham Stern authored
Add an entry for setting the maximum TXOP time in microseconds. The configured value can be read from the same entry. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Reviewed-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Avraham Stern authored
Allow UAPSD when P2P and BSS interfaces share the same channel. Signed-off-by:
-
Emmanuel Grumbach authored
uAPSD can't be enabled on BSS or P2P Client if there is another active interface (e.g. associated client). Allow the code that apply those limitations to run on BSS as well. Also forbid uAPSD if we have an IBSS or NAN interface in the system. Since we are now forbidding uAPSD in any concurrency scenario, we don't need to check the number of PHY contexts. Signed-off-by:
-
Johannes Berg authored
The logic here is rather convoluted - we cannot get here with lq_sta being NULL as mac80211 will (no longer) call us like that, and since I removed the rate_control_send_low() call in this function there's no longer any point in setting priv_sta to NULL either. So the only thing that remains to check is if we have actually initialized our lq_sta->drv pointer, and exit if we didn't in which case we'll use the data mac80211 already set up for the low rate usage. Reviewed-by:
-
Johannes Berg authored
If the TPE (transmit power envelope) is changed, detect and report that to the driver. Reviewed-by:
-
Johannes Berg authored
Instead of passing the full TPE elements, in all their glory and mixed up data formats for HE backward compatibility, parse them fully into the right values, and pass that to the drivers. Also introduce proper validation already in mac80211, so that drivers don't need to do it, and parse the EHT portions. The code now passes the values in the right order according to the channel used by an interface, which could also be a subset of the data advertised by the AP, if we couldn't connect with the full bandwidth (for whatever reason.) Also add kunit tests for the more complicated bits of it. Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeidSigned-off-by:
-
Johannes Berg authored
The chanctx can be shared, but it seems like the TPE values for this vif should only reflect the channel that the vif uses, which is captured in bss_conf->chanreq.oper rather than the chanctx. Use that when calculating defaults, a similar issue is where the data from the AP is processed, but I'm moving that to mac80211. Acked-by:
-
Johannes Berg authored
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much sense. Yes, that table has a maximum value of 8, and the table will actually remain that way, but EHT introduced a way to encode more levels for 320 MHz channels. Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being the only user, add ATH11K_NUM_PWR_LEVELS, where it makes sense since it cannot support 320 MHz channels. Acked-by:
-
Mukesh Sisodiya authored
6 GHz AP power type details are required to set proper tx power used to send frames. Update AP power type received in beacon while preparing for connection instead of after association so the frames before association can use the correct tx power. Reviewed-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Link: https://msgid.link/20240506214536.310434f55f76.I6aca291ee06265e3f63e0f9024ba19a850b53a33@changeidSigned-off-by:
-
Johannes Berg authored
There's no need to have a lockdep assert and then call another function, just move everything into one place. Reviewed-by:
-
Johannes Berg authored
These comments are no longer correct, it's a wiphy work now so it will go away immediately when canceled. Reviewed-by:
-
Johannes Berg authored
Add trace events to trace when wiphy works are queued (or delayed ones scheduled), and other APIs are called. Also add an event when the worker starts, before acquiring the mutex, to be able to see potential delays due to locking. Reviewed-by:
Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeidSigned-off-by:
-
Johannes Berg authored
They were meant to be split into ops and APIs, but some ops were added in the wrong place. Fix that. Reviewed-by:
-
Johannes Berg authored
Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeidSigned-off-by:
-
Johannes Berg authored
Add some documentation to ieee80211_is_timing_measurement() and ieee80211_is_ftm(). Link: https://msgid.link/20240515093852.229aa69e972c.Ifae6762a698e79cd5a49a055fe4c32330e826200@changeidSigned-off-by:
-
Johannes Berg authored
These are all missing, as pointed out when running kernel-doc. Add return value documentation and fix some small things while at it. Link: https://msgid.link/20240515093852.1cd5ad8f354d.Idc16e9767fa42de80b659c32efc58aea38c26996@changeidSigned-off-by:
-
Johannes Berg authored
This is actually completely equivalent to the other function ieee80211_is_s1g_short_beacon(), but open-codes the logic. Implement the necessary logic in ieee80211_is_s1g_short_beacon() and remove ieee80211_next_tbtt_present(). Link: https://msgid.link/20240515093852.774ced74dea8.I152525b4cff6e6a25be6c48fe6a4b89f17bab8a9@changeidSigned-off-by:
-
Johannes Berg authored
Document the return value of ieee80211_get_radiotap_len() in the proper kernel-doc format. Link: https://msgid.link/20240515093852.143aadfdb094.I8795ec1e8cfd7106d58325fb514bae92625fb45c@changeidSigned-off-by:
-
Johannes Berg authored
Some structures erroneously don't have a short description, add the missing descriptions. Link: https://msgid.link/20240515093852.16f4355e918e.I940276a4fb006ada68ab1a3e6077e3229fff0f14@changeidSigned-off-by:
-
Johannes Berg authored
The struct member country_ie_checksum doesn't exist, so don't document it. Link: https://msgid.link/20240515093852.ebcc9673558b.Ie0b58c1249c6375c60859fa6474d7cdd8862b065@changeidSigned-off-by:
-
- 20 May, 2024 1 commit
-
-
Dmitry Antipov authored
Remove unused 'agc_work' and 'vco_work' members of 'struct link'. This follows commit d9632470 ("rt2x00: merge agc and vco works with link tuner") where AGC and VCO calibration code was completely redesigned. Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
- 17 May, 2024 7 commits
-
-
Rafael Beims authored
When changing the interface type we also need to update the bss_num, the driver private data is searched based on a unique (bss_type, bss_num) tuple, therefore every time bss_type changes, bss_num must also change. This fixes for example an issue in which, after the mode changed, a wireless scan on the changed interface would not finish, leading to repeated -EBUSY messages to userspace when other scan requests were sent. Fixes: c606008b ("mwifiex: Properly initialize private structure on interface type changes") Cc: stable@vger.kernel.org Signed-off-by:
Rafael Beims <rafael.beims@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by:
-
Ajay Singh authored
The default netdev interface exposed by WILC1000 is registered at probe, but the chip mac address is not known until ndo_open, which will load and start chip firmware and then retrieve stored MAC address from it. As a consequence, the interface has uninitialized value (00:00:00:00:00) until a user brings up the interface. Fix MAC address at probe by setting the following steps: - at probe, read MAC address directly from fuse - whenever a new netdevice is created, apply saved mac address (which can be a user-provided address, or the eFuse Mac address if no address has been passed by user) - whenever an interface is brought up for the first time (and so the firmware is loaded and started), enforce netdevice mac address to the chip (in case user has changed it) Reported-by:
Heiko Thiery <heiko.thiery@gmail.com> Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Co-developed-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
-
Alexis Lothoré authored
In order to be able to read raw registers (eg the nv mac address) in wilc1000 during probe before the firmware is loaded and running, we need to run the basic sdio functions initialization, but then we also need to properly deinitialize those right after, to preserve the current driver behavior (keeping the chip idle/unconfigured until the corresponding interface is brought up). Calling wilc_sdio_deinit in its current form is not enough because it merely resets an internal flag. Implement a deinit sequence which symmetrically reset all steps performed in wilc_sdio_init (only for parts activating/deactivating features, for the sake of simplicity, let's ignore blocks size configuration reset) Signed-off-by:
-
Alexis Lothoré authored
wilc driver currently reads and sets mac address by firmware calls. It means that we can not access mac address if no interface has been brought up (so firmware is up and running). Another way to get mac address is to read it directly from eFUSE. Add a function helper to read the mac address written in eFuse, without firmware assistance Signed-off-by:
-
Alexis Lothoré authored
Any attempt to provide a const mac address to wilc_set_mac_address results in the following warning: warning: passing argument 2 of 'wilc_set_mac_address' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [...] drivers/net/wireless/microchip/wilc1000/hif.h:170:52: note: expected 'u8 *' {aka 'unsigned char *'} but argument is of type 'const unsigned char *'a int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr); Instead of using an explicit cast each time we need provide a MAC address, set the function parameter as const Signed-off-by: -
Alexis Lothoré authored
SDIO/SPI probes functions automatically add a default wlan interface on top of registered wiphy, through wilc_cfg80211_init which in turn calls wilc_netdev_ifc_init. However, bus is still not fully initialized when we register corresponding net device (for example we still miss some private driver data pointers), which for example makes it impossible to retrieve MAC address from chip (which is supposed to be set on net device before its registration) before registering net device. More generally, net device registration should not be done until driver has fully initialized everything and is ready to handle any operation on the net device. Prevent net device from being registered so early by doing it at the end of probe functions. Apply this logic to both sdio and spi buses. Signed-off-by:
-
Alexis Lothoré authored
net device registration is currently done in wilc_netdev_ifc_init but other initialization operations are still done after this registration. Since net device is assumed to be usable right after registration, it should be the very last step of initialization. Move netdev registration at the very end of wilc_netdev_ifc_init to let this function completely initialize netdevice before registering it. Signed-off-by:
-
- 14 May, 2024 2 commits
-
-
Samasth Norway Ananda authored
The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0 ("net: wireless: add brcm80211 drivers") Signed-off-by:
Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Andrii Batyiev authored
Monitor/sniffer mode benefits from all types of frames, even if FCS check fails. But we must mark frames as such. Tested on iwl3945 only. Signed-off-by:
Andrii Batyiev <batyiev@gmail.com> Signed-off-by:
-
