Instead of using direct update, avoid touching unrelated fields.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Interrupt sq data bits were not taken properly from contextid0 and contextid1.
Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During a GPU reset, a normal memory reclaim could block to reclaim
memory. Giving that coredump is a best effort mechanism, it shouldn't
disturb the reset path. Change its memory allocation flag to a
nonblocking one.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Driver queries umc_info v4_0 to identify ecc cap
for aqua_vanjaram
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To be used by aqua_vanjaram
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ODM power optimization is only supported with single stream. When ODM
power optimization is enabled, we might not have enough free pipes for
enabling other stream. So when we are committing more than 1 stream we
should first switch off ODM power optimization to make room for new
stream and then allocating pipe resource for the new stream.

Cc: stable@vger.kernel.org
Fixes: 59de751e ("drm/amd/display: add ODM case when looking for first split pipe")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We wait for mpc idle while in a locked state, leading to potential
deadlock.

[What]
Move the wait_for_idle call to outside of HW lock. This and a
call to wait_drr_doublebuffer_pending_clear are moved added to a new
static helper function called wait_for_outstanding_hw_updates, to make
the interface clearer.

Cc: stable@vger.kernel.org
Fixes: 8f0d304d ("drm/amd/display: Do not commit pipe when updating DRR")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When we are dynamically adding new ODM slices, we didn't update
blank state, if the pipe used by new ODM slice is previously blanked,
we will continue outputting blank pixel data on that slice causing
right half of the screen showing blank image.

The previous fix was a temporary hack to directly update current state
when committing new state. This could potentially cause hw and sw
state synchronization issues and it is not permitted by dc commit
design.

Cc: stable@vger.kernel.org
Fixes: 7fbf451e ("drm/amd/display: Reinit DPG when exiting dynamic ODM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.

Cc: stable@vger.kernel.org # 6.1+
Fixes: f9490399 ("drm/amd/display: Add DCN315 CLK_MGR")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For APUs with SMU v13.0.6, mode-2 reset is kept as default and for
others mode-1 is the default reset method.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This partially reverts commit 460ea898 ("drm/amd/display: update add
plane to context logic with a new algorithm").

The new secondary pipe allocation logic triggers an issue with a
specific hardware state transition and causes a frame of corruption when
toggling between windowed MPO and ODM desktop only mode. Ideally hwss is
supposed to handle this scenario. We are temporarily reverting the logic
and investigate the root cause why this transition would cause
corruptions.

Fixes: 460ea898 ("drm/amd/display: update add plane to context logic with a new algorithm")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As made mention of in commit 099303e9 ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891f ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement the wait for bootloader call back for PSP v13.0 ASICs. Only
for ASICs with PSP v13.0.6, it needs an additional check for VBIOS
mailbox status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update TCP/UTCL1 thrashing control settings

v2: updated rev_id check
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Print both input and avg power.

Fixes: 47f1724d ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_device_mode1_reset will return gpu mode1_reset
succeed (ret = 0) as long as wait_for_bootloader call
succeed, regardless of the status reported by smu or
psp firmware. This results to driver continue executing
recovery even smu or psp fail to perform mode1 reset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.

[How]
Add new function to apply correct settings for DCN3 series.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: SungHuai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As made mention of in commit 4a2df0d1 ("drm/amd/display: Fixed
non-native modes not lighting up"), we shouldn't call
drm_mode_set_crtcinfo() once the crtc timings have been decided. Since,
it can cause settings to be unintentionally overwritten. So, since
dm_state is never NULL now, we can use old_stream to determine if we
should call drm_mode_set_crtcinfo() because we only need to set the crtc
timing parameters for entirely new streams.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Fixes: bd49f190 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Critical Temperature needs to be reported in
millidegree Celsius.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

rlc firmware does required setting, driver need not do it.
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a function to wait till bootloader has reached steady state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.

[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO dummy mode could be set under reset conditions and that affects
framebuffer access. Check If baco dummy mode is set, unset it if so.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.

[How]
Setup a minimum value to VBlank_nom
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.

[how]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
This Unit correction exposes a Replay corruption.

[how]
This reverts commit:
commit dbd29029 ("drm/amd/display: Correct unit conversion for vstartup")

Roll back unit conversion until Replay can fix their corruption.

Fixes: dbd29029 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable ras for mp0 v13_0_6 sriov
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Powergating is handled in the host driver.
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add critical temperature message support func for smu v13.0.6
and expose critical temperature as part of hw mon attributes
for GC v9.4.3

v2:
Added comment for pmfw version requirement & move the check
to get_thermal_temperature_range function
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update PMFW interface headers for updated metrics table and
critical temperature message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Several new fields are exposed in gc_info v2_1
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mall info v2 is introduced in ip discovery
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS EEPROM device is only supported on dGPU platform for smu v13_0_6.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7957ec80 ("drm/amdgpu: Add FRU sysfs nodes only if needed") moved
the documentation for some of the sysfs nodes to amdgpu_fru_eeprom.c.
Update the documentation accordingly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- There is a DPM issue where if DC is not present,
  FCLK will stay at low level.
  We need to send a SMU message to configure the DPM

- Reuse smu_v13_0_notify_display_change() for this purpose
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2023-08-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix TLB invalidation (Alan)
- Fix Display HPD polling (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZOdOP31OE/Cf1ojo@intel.com

Merge tag 'drm-misc-next-fixes-2023-08-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * gpuva: Cleanups

 * kunit: Documentation fixes

 * nouveau:
   * UAPI: Avoid implicit NO_PREFETCH flag
   * Scheduler fixes
   * Fix remap

 * ttm: Fix type conversion in tests
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824181241.GA6386@linux-uq9g.hotspot.internet-for-guests.com