- 27 May, 2020 33 commits
-
-
Guillaume Nault authored
commit 55a3ce3b upstream. This function isn't used anymore. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Giuliano Procida <gprocida@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
commit af87ae46 upstream. There's no point in checking for duplicate sessions at the beginning of l2tp_nl_cmd_session_create(); the ->session_create() callbacks already return -EEXIST when the session already exists. Furthermore, even if l2tp_session_find() returns NULL, a new session might be created right after the test. So relying on ->session_create() to avoid duplicate session is the only sane behaviour. Signed-off-by:
-
R. Parameswaran authored
commit b784e7eb upstream. Existing L2TP kernel code does not derive the optimal MTU for Ethernet pseudowires and instead leaves this to a userspace L2TP daemon or operator. If an MTU is not specified, the existing kernel code chooses an MTU that does not take account of all tunnel header overheads, which can lead to unwanted IP fragmentation. When L2TP is used without a control plane (userspace daemon), we would prefer that the kernel does a better job of choosing a default pseudowire MTU, taking account of all tunnel header overheads, including IP header options, if any. This patch addresses this. Change-set here uses the new kernel function, kernel_sock_ip_overhead(), to factor the outer IP overhead on the L2TP tunnel socket (including IP Options, if any) when calculating the default MTU for an Ethernet pseudowire, along with consideration of the inner Ethernet header. Signed-off-by:
R. Parameswaran <rparames@brocade.com> Signed-off-by:
-
R. Parameswaran authored
commit 113c3075 upstream. A new function, kernel_sock_ip_overhead(), is provided to calculate the cumulative overhead imposed by the IP Header and IP options, if any, on a socket's payload. The new function returns an overhead of zero for sockets that do not belong to the IPv4 or IPv6 address families. This is used in the L2TP code path to compute the total outer IP overhead on the L2TP tunnel socket when calculating the default MTU for Ethernet pseudowires. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
commit fba40c63 upstream. Signed-off-by:
Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
commit 47c3e778 upstream. PPPOL2TP_MSG_* and L2TP_MSG_* are duplicates, and are being used interchangeably in the kernel, so let's standardize on L2TP_MSG_* internally, and keep PPPOL2TP_MSG_* defined in UAPI for compatibility. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
commit 41c43fbe upstream. Move the L2TP_MSG_* definitions to UAPI, as it is part of the netlink API. Signed-off-by:
-
Kevin Hao authored
commit 72139dfa upstream. The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> [bwh: Backported to 4.9: - There's no reboot notifier here - Adjust context] Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Christoph Hellwig authored
Commit d51c2145 upstream. The second argument is the end "pointer", not the length. Fixes: d28f6df1 ("arm64/kexec: Add core kexec support") Cc: <stable@vger.kernel.org> # 4.8.x- Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Jordan authored
[ Upstream commit 065cf577 ] With the removal of the padata timer, padata_do_serial no longer needs special CPU handling, so remove it. Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Jordan authored
[ Upstream commit ec9c7d19 ] Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from cryptodev-2.6.git in an 8-CPU kvm guest... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask # modprobe tcrypt mode=215 ...caused the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip> Workqueue: pencrypt padata_parallel_worker RIP: 0010:padata_reorder+0xcb/0x180 ... Call Trace: padata_do_serial+0x57/0x60 pcrypt_aead_enc+0x3a/0x50 [pcrypt] padata_parallel_worker+0x9b/0xe0 process_one_work+0x1b5/0x3f0 worker_thread+0x4a/0x3c0 ... In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask instead of the effective cpumask, and in this case cpumask_first picked an offline CPU. The offline CPU's reorder->list.next is NULL in padata_reorder because the list wasn't initialized in padata_init_pqueues, which only operates on CPUs in the effective mask. Fix by using the effective mask in padata_alloc_pd. Fixes: 6fc4dbcf ("padata: Replace delayed timer with immediate workqueue in padata_reorder") Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 6fc4dbcf ] The function padata_reorder will use a timer when it cannot progress while completed jobs are outstanding (pd->reorder_objects > 0). This is suboptimal as if we do end up using the timer then it would have introduced a gratuitous delay of one second. In fact we can easily distinguish between whether completed jobs are outstanding and whether we can make progress. All we have to do is look at the next pqueue list. This patch does that by replacing pd->processed with pd->cpu so that the next pqueue is more accessible. A work queue is used instead of the original try_again to avoid hogging the CPU. Note that we don't bother removing the work queue in padata_flush_queues because the whole premise is broken. You cannot flush async crypto requests so it makes no sense to even try. A subsequent patch will fix it by replacing it with a ref counting scheme. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 1bd845bc ] The parallel queue per-cpu data structure gets initialized only for CPUs in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer may run on a different CPU and might wrongly decide it's the target CPU for the next reorder item as per-cpu memory gets memset(0) and we might be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0. Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index' compare in padata_get_next() fail in this case by initializing the cpu_index member of all per-cpu parallel queues. Use -1 for unused ones. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Kevin Hao authored
[ Upstream commit 1413ef63 ] The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 8101b5a1 ] Stephen reported the following build warning on a ARM multi_v7_defconfig build with GCC 9.2.1: kernel/futex.c: In function 'do_futex': kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] 1676 | return oldval == cmparg; | ~~~~~~~^~~~~~~~~ kernel/futex.c:1652:6: note: 'oldval' was declared here 1652 | int oldval, ret; | ^~~~~~ introduced by commit a08971e9 ("futex: arch_futex_atomic_op_inuser() calling conventions change"). While that change should not make any difference it confuses GCC which fails to work out that oldval is not referenced when the return value is not zero. GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the early return, the issue is with the assembly macros. GCC fails to detect that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT which makes oldval uninteresting. The store to the callsite supplied oldval pointer is conditional on ret == 0. The straight forward way to solve this is to make the store unconditional. Aside of addressing the build warning this makes sense anyway because it removes the conditional from the fastpath. In the error case the stored value is uninteresting and the extra store does not matter at all. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.deSigned-off-by:
-
Hans de Goede authored
[ Upstream commit 3bd12da7 ] asus-nb-wmi does not add any extra functionality on these Asus Transformer books. They have detachable keyboards, so the hotkeys are send through a HID device (and handled by the hid-asus driver) and also the rfkill functionality is not used on these devices. Besides not adding any extra functionality, initializing the WMI interface on these devices actually has a negative side-effect. For some reason the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED, high and there is no (WMI or other) interface to drive this low again causing the LED to be permanently on, even during suspend. This commit adds a blacklist of DMI system_ids on which not to load the asus-nb-wmi and adds these Transformer books to this list. This fixes the webcam LED being permanently on under Linux. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Alan Stern authored
[ Upstream commit ac854131 ] The syzbot fuzzer found a race between URB submission to endpoint 0 and device reset. Namely, during the reset we call usb_ep0_reinit() because the characteristics of ep0 may have changed (if the reset follows a firmware update, for example). While usb_ep0_reinit() is running there is a brief period during which the pointers stored in udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is submitted to ep0 during that period, usb_urb_ep_type_check() will report it as a driver bug. In the absence of those pointers, the routine thinks that the endpoint doesn't exist. The log message looks like this: ------------[ cut here ]------------ usb 2-1: BOGUS urb xfer, pipe 2 != type 2 WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478 usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478 Now, although submitting an URB while the device is being reset is a questionable thing to do, it shouldn't count as a driver bug as severe as submitting an URB for an endpoint that doesn't exist. Indeed, endpoint 0 always exists, even while the device is in its unconfigured state. To prevent these misleading driver bug reports, this patch updates usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[] pointers when the endpoint being disabled is ep0. There's no danger of leaving a stale pointer in place, because the usb_host_endpoint structure being pointed to is stored permanently in udev->ep0; it doesn't get deallocated until the entire usb_device structure does. Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.orgSigned-off-by:
-
Wu Bo authored
[ Upstream commit 4d8e28ff ] If the ceph_mdsc_open_export_target_session() return fails, it will do a "goto retry", but the session mutex has already been unlocked. Re-lock the mutex in that case to ensure that we don't unlock it twice. Signed-off-by:
Wu Bo <wubo40@huawei.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Yoshiyuki Kurauchi authored
[ Upstream commit 846c68f7 ] In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by:
Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by:
-
James Hilliard authored
[ Upstream commit 7706b0a7 ] If a component fails to bind due to -EPROBE_DEFER we should not log an error as this is not a real failure. Fixes messages like: vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 vc4-drm soc:gpu: master bind failed: -517 Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200411190241.89404-1-james.hilliard1@gmail.comSigned-off-by:
-
Xiyu Yang authored
[ Upstream commit 8aebfffa ] configfs_rmdir() invokes configfs_get_config_item(), which returns a reference of the specified config_item object to "parent_item" with increased refcnt. When configfs_rmdir() returns, local variable "parent_item" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of configfs_rmdir(). When down_write_killable() fails, the function forgets to decrease the refcnt increased by configfs_get_config_item(), causing a refcnt leak. Fix this issue by calling config_item_put() when down_write_killable() fails. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Sebastian Reichel authored
[ Upstream commit f9e82295 ] Add support for P80H84 touchscreen from eGalaxy: idVendor 0x0eef D-WAV Scientific Co., Ltd idProduct 0xc002 iManufacturer 1 eGalax Inc. iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146 Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Frédéric Pierret (fepitre) authored
[ Upstream commit c7527373 ] Remove "params.h" include, which has been dropped in GCC 10. Remove is_a_helper() macro, which is now defined in gimple.h, as seen when running './scripts/gcc-plugin.sh g++ g++ gcc': In file included from <stdin>:1: ./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ 852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./gcc-plugins/gcc-common.h:125, from <stdin>:1: /usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here 1037 | is_a_helper <const ggoto *>::test (const gimple *gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid meaningless warnings from error() formats used by plugins: scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’: scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag] 253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org> Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org [kees: include -Wno-format-diag for plugin builds] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit e9d1a0a4 ] A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba87 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Alexander Monakov authored
[ Upstream commit e461b8c9 ] IVRS parsing code always tries to read 255 bytes from memory when retrieving ACPI device path, and makes an assumption that firmware provides a zero-terminated string. Both of those are bugs: the entry is likely to be shorter than 255 bytes, and zero-termination is not guaranteed. With Acer SF314-42 firmware these issues manifest visibly in dmesg: AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1... The first three lines show how the code over-reads adjacent table entries into the UID, and in the last line it even reads garbage data beyond the end of the IVRS table itself. Since each entry has the length of the UID (uidl member of ivhd_entry struct), use that for memcpy, and manually add a zero terminator. Avoid zero-filling hid and uid arrays up front, and instead ensure the uid array is always zero-terminated. No change needed for the hid array, as it was already properly zero-terminated. Fixes: 2a0cb4e2 ("iommu/amd: Add new map for storing IVHD dev entry type HID") Signed-off-by:
Alexander Monakov <amonakov@ispras.ru> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Link: https://lore.kernel.org/r/20200511102352.1831-1-amonakov@ispras.ruSigned-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Al Viro authored
[ Upstream commit 4e89b721 ] cpy and set really should be size_t; we won't get an overflow on that, since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *), so nr that would've managed to overflow size_t on that multiplication won't get anywhere near copy_fdtable() - we'll fail with EMFILE before that. Cc: stable@kernel.org # v2.6.25+ Fixes: 9cfe015a (get rid of NR_OPEN and introduce a sysctl_nr_open) Reported-by:
Thiago Macieira <thiago.macieira@intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Roberto Sassu authored
[ Upstream commit 2e3a34e9 ] This patch fixes the return value of ima_write_policy() when a new policy is directly passed to IMA and the current policy requires appraisal of the file containing the policy. Currently, if appraisal is not in ENFORCE mode, ima_write_policy() returns 0 and leads user space applications to an endless loop. Fix this issue by denying the operation regardless of the appraisal mode. Cc: stable@vger.kernel.org # 4.10.x Fixes: 19f8a847 ("ima: measure and appraise the IMA policy itself") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by:
Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Roberto Sassu authored
[ Upstream commit 53de3b08 ] This patch avoids a kernel panic due to accessing an error pointer set by crypto_alloc_shash(). It occurs especially when there are many files that require an unsupported algorithm, as it would increase the likelihood of the following race condition: Task A: *tfm = crypto_alloc_shash() <= error pointer Task B: if (*tfm == NULL) <= *tfm is not NULL, use it Task B: rc = crypto_shash_init(desc) <= panic Task A: *tfm = NULL This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new crypto context must be created. Cc: stable@vger.kernel.org Fixes: d46eb369 ("evm: crypto hash replaced by shash") Co-developed-by:
-
Mathias Krause authored
commit 350ef88e upstream. If the algorithm we're parallelizing is asynchronous we might change CPUs between padata_do_parallel() and padata_do_serial(). However, we don't expect this to happen as we need to enqueue the padata object into the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel queue. Ensure we're not switching CPUs for a given padata object by tracking the CPU within the padata object. If the serial callback gets called on the wrong CPU, defer invoking padata_reorder() via a kernel worker on the CPU we're expected to run on. Signed-off-by:
-
Mathias Krause authored
commit cf5868c8 upstream. The reorder timer function runs on the CPU where the timer interrupt was handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask set. Ensure the padata_reorder() callback runs on the correct CPU, which is one in the 'pcpu' CPU mask set and, preferrably, the next expected one. Do so by comparing the current CPU with the expected target CPU. If they match, call padata_reorder() right away. If they differ, schedule a work item on the target CPU that does the padata_reorder() call for us. Signed-off-by:
-
Jason A. Donenfeld authored
commit 69b34844 upstream. Per Dan's static checker warning, the code that returns NULL was removed in 2010, so this patch updates the comments and fixes the code assumptions. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Tobias Klauser authored
commit 119a0798 upstream. Remove the unused but set variable pinst in padata_parallel_worker to fix the following warning when building with 'W=1': kernel/padata.c: In function ‘padata_parallel_worker’: kernel/padata.c:68:26: warning: variable ‘pinst’ set but not used [-Wunused-but-set-variable] Also remove the now unused variable pd which is only used to set pinst. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
-
Cao jin authored
commit 629823b8 upstream. When running as guest, under certain condition, it will oops as following. writel() in igb_configure_tx_ring() results in oops, because hw->hw_addr is NULL. While other register access won't oops kernel because they use wr32/rd32 which have a defense against NULL pointer. [ 141.225449] pcieport 0000:00:1c.0: AER: Multiple Uncorrected (Fatal) error received: id=0101 [ 141.225523] igb 0000:01:00.1: PCIe Bus Error: severity=Uncorrected (Fatal), type=Unaccessible, id=0101(Unregistered Agent ID) [ 141.299442] igb 0000:01:00.1: broadcast error_detected message [ 141.300539] igb 0000:01:00.0 enp1s0f0: PCIe link lost, device now detached [ 141.351019] igb 0000:01:00.1 enp1s0f1: PCIe link lost, device now detached [ 143.465904] pcieport 0000:00:1c.0: Root Port link has been reset [ 143.465994] igb 0000:01:00.1: broadcast slot_reset message [ 143.466039] igb 0000:01:00.0: enabling device (0000 -> 0002) [ 144.389078] igb 0000:01:00.1: enabling device (0000 -> 0002) [ 145.312078] igb 0000:01:00.1: broadcast resume message [ 145.322211] BUG: unable to handle kernel paging request at 0000000000003818 [ 145.361275] IP: [<ffffffffa02fd38d>] igb_configure_tx_ring+0x14d/0x280 [igb] [ 145.400048] PGD 0 [ 145.438007] Oops: 0002 [#1] SMP A similar issue & solution could be found at: http://patchwork.ozlabs.org/patch/689592/Signed-off-by:
Cao jin <caoj.fnst@cn.fujitsu.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 20 May, 2020 7 commits
-
-
Greg Kroah-Hartman authored
-
Sergei Trofimovich authored
commit b1112139 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Jim Mattson authored
commit c4e0e4ab upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit e47cb97f upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583 ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
commit 0f739fdf upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b65230 ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by:
-
Kai-Heng Feng authored
commit f41224ef upstream. This reverts commit 3b36b13d. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13d ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wei Yongjun authored
commit e8f7f9e3 upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
