- 28 Mar, 2018 9 commits
-
-
Hans de Goede authored
commit 28b2182d upstream. Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235 controller in general, this RAID card also supports AHCI mode and short of a custom driver, this is the only way to make it work under Linux. Note that even though the card is called to 644L, it has a product-id of 0x0645. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 1903be82 upstream. The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with other Marvel controllers this needs a function 1 DMA alias quirk. Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and already is listed with a function 1 DMA alias quirk. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Evgeniy Didin authored
commit 47b7de2f upstream. It was found that in IDMAC mode after soft-reset driver switches to PIO mode. That's what happens in case of DTO timeout overflow calculation failure: 1. soft-reset is called 2. driver restarts dma 3. descriptors states are checked, one of descriptor is owned by the IDMAC. 4. driver can't use DMA and then switches to PIO mode. Failure was already fixed in: https://www.spinics.net/lists/linux-mmc/msg48125.html. Behaviour while soft-reset is not something we except or even want to happen. So we switch from dw_mci_idmac_reset to dw_mci_idmac_init, so descriptors are cleaned before starting dma. And while at it explicitly zero des0 which otherwise might contain garbage as being allocated by dmam_alloc_coherent(). Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit e40bdb03 upstream. Some HP laptops have a mute mute LED controlled by a pin VREF. The Realtek codec driver updates the VREF via vmaster hook by calling snd_hda_set_pin_ctl_cache(). This works fine as long as the driver is running in a normal mode. However, when the VREF change happens during the codec being in runtime PM suspend, the regmap access will skip and postpone the actual register change. This ends up with the unchanged LED status until the next runtime PM resume even if you change the Master mute switch. (Interestingly, the machine keeps the LED status even after the codec goes into D3 -- but it's another story.) For improving this usability, let the driver temporarily powering up / down only during the pin VREF change. This can be achieved easily by wrapping the call with snd_hda_power_up_pm() / *_down_pm(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 8e6b1a72 upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 67a01afa upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kirill Marinushkin authored
commit a6618f4a upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Nosthoff authored
commit 8b438686 upstream. Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff <committed@heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
NeilBrown authored
commit 891731f6 upstream. ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836a ("MIPS: ralink: adds reset code") Signed-off-by: NeilBrown <neil@brown.name> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/18851/Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Mar, 2018 31 commits
-
-
Greg Kroah-Hartman authored
-
Leon Romanovsky authored
commit 7688f2c3 upstream. The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com> Fixes: c8f6a362 ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vignesh R authored
[ Upstream commit d087f157 ] Register layout of a typical TPCC_EVT_MUX_M_N register is such that the lowest numbered event is at the lowest byte address and highest numbered event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is different, in that the lowest numbered event is at the highest address and highest numbered event is at the lowest address. Therefore, modify ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register accordingly. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergej Sawazki authored
[ Upstream commit cdba9a4f ] This drivers probe fails due to a clock name collision if a clock named 'plla' or 'pllb' is already registered when registering this drivers internal plls. Fix it by renaming internal plls to avoid name collisions. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Sergej Sawazki <sergej@taudac.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Coddington authored
[ Upstream commit 66282ec1 ] Clients must be able to read a file in order to execute it, and for pNFS that means the client needs to be able to perform a LAYOUTGET on the file. This behavior for executable-only files was added for OPEN in commit a043226b "nfsd4: permit read opens of executable-only files". This fixes up xfstests generic/126 on block/scsi layouts. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 74482086 ] Debugfs file reset_stats is created with S_IRUSR permissions, but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS, whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS. The patch fixes misstype with permissions. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Kodanev authored
[ Upstream commit 53c81e95 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jerry Snitselaar authored
[ Upstream commit 72d54811 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit 981ed1bf ] In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing. In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state(). [Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function. Fixes: 6e5e959d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Walker authored
[ Upstream commit 11595db8 ] The CoreSight TPIU should be disabled when tracing to other sinks to allow them to operate at full bandwidth. This patch fixes tpiu_disable_hw() to correctly disable the TPIU by configuring the TPIU to stop on flush, initiating a manual flush, waiting for the flush to complete and then waits for the TPIU to indicate it has stopped. Signed-off-by: Robert Walker <robert.walker@arm.com> Tested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sahara authored
[ Upstream commit 2b022ab7 ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Ujfalusi authored
[ Upstream commit b7ea6b28 ] Check the status of the DMM engine after it is reported that the transaction was completed as in rare cases the engine might not reached a working state. The wait_status() will print information in case the DMM is not reached the expected state and the dmm_txn_commit() will return with an error code to make sure that we are not continuing with a broken setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjorn Helgaas authored
[ Upstream commit c8208411 ] Set the resource type when we reserve VGA-related I/O port resources. The resource code doesn't actually look at the type, so it inserts resources without a type in the tree correctly even without this change. But if we ever print a resource without a type, it looks like this: vga+ [??? 0x000003c0-0x000003df flags 0x0] Setting the type means it will be printed correctly as: vga+ [io 0x000003c0-0x000003df] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Artemy Kovalyov authored
[ Upstream commit edf1a84f ] In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f13 ('IB/core: Add umem function to read data from user-space') Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Parav Pandit authored
[ Upstream commit 7baaa49a ] The code was using the src size when formatting the dst. They are almost certainly the same value but it reads wrong. Fixes: ce117ffa ("RDMA/cma: Export AF_IB statistics") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erez Shitrit authored
[ Upstream commit 43900089 ] The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Drake authored
[ Upstream commit de8dcc3d ] The Weibu F3C MiniPC has an onboard AP6255 module, presenting two SDIO functions on a single MMC host (Bluetooth/btsdio and WiFi/brcmfmac), and the mmc layer correctly detects this as non-removable. After suspend/resume, the wifi and bluetooth interfaces disappear and do not get probed again. The conditions here are: 1. During suspend, we reach mmc_pm_notify() 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can suspend the SDIO host. However, mmc_sdio_pre_suspend() returns -ENOSYS because btsdio_driver does not have a suspend method. 3. mmc_pm_notify() proceeds to remove the card 4. Upon resume, mmc_rescan() does nothing with this host, because of the rescan_entered check which aims to only scan a non-removable device a single time (i.e. during boot). Fix the loss of functionality by detecting that we are unable to suspend a non-removable host, so avoid the forced removal in that case. The comment above this function already indicates that this code was only intended for removable devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Nematbakhsh authored
[ Upstream commit d48b8c58 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
[ Upstream commit 50a0d71a ] As gcc-8 reports, we zero out the wrong byte: drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version': drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds] This changes the code back to what it did before changing to a zero-length array structure. Fixes: a8411784 ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ron Economos authored
[ Upstream commit 380a6c86 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
[ Upstream commit 45392ff6 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12 ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tsang-Shian Lin authored
[ Upstream commit b7573a0a ] Reset the driver current tx read/write index to zero when inactiveps nic out of sync with HW state. Wrong driver tx read/write index will cause Tx fail. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
[ Upstream commit 302d6424 ] With gcc-4.1.2: drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’: drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function Indeed, if nl_client is not found in any of the scanned has buckets, ret will be used uninitialized. Preinitialize ret to -EINVAL to fix this. Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prakash Kamliya authored
[ Upstream commit 62e3a3e3 ] get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup. Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
[ Upstream commit baed3c4b ] _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f9 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Loic Poulain authored
[ Upstream commit ba8f3597 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kim Phillips authored
[ Upstream commit 805b151a ] __kmod_path__parse() uses is_supported_compression() to determine and parse out compressed module file extensions. On systems without zlib, this test fails and __kmod_path__parse() continues to strcmp "ko" with "gz". Don't do this on those systems. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 3c8a67f5 ("perf tools: Add kmod_path__parse function") Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moritz Fischer authored
[ Upstream commit 538c08f4 ] The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls through to the -EINVAL case. This is wrong since thew watchdog does actually get stopped or started correctly. Fixes: 920f91e5 ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moritz Fischer authored
[ Upstream commit 453d0744 ] The issue is that the internal counter that triggers the watchdog reset is actually running at 4096 Hz instead of 1Hz, therefore the value given by userland (in sec) needs to be multiplied by 4096 to get the correct behavior. Fixes: 920f91e5 ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit 564277ec ] January is month 1. There is no zero-th month. If someone passes a zero month then it means we read from one space before the start of the total_days_of_prev_months[] array. We may as well also be strict about days as well. Fixes: 1bd5bbcb ("[CIFS] Legacy time handling for Win9x and OS/2 part 1") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Timmy Li authored
[ Upstream commit 412b65d1 ] hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated is not enough for ethtool_get_strings(), which will cause random memory corruption. When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the the following can be observed without this patch: [ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80 [ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070. [ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70) [ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk [ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k [ 43.115218] Next obj: start=ffff801fb0b69098, len=80 [ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b. [ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38) [ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_ [ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai Signed-off-by: Timmy Li <lixiaoping3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-