- 16 Oct, 2007 40 commits
-
-
Mel Gorman authored
Per-cpu pages can accidentally cause fragmentation because they are free, but pinned pages in an otherwise contiguous block. When this patch is applied, the per-cpu caches are drained after the direct-reclaim is entered if the requested order is greater than 0. It simply reuses the code used by suspend and hotplug. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
The grouping mechanism has some memory overhead and a more complex allocation path. This patch allows the strategy to be disabled for small memory systems or if it is known the workload is suffering because of the strategy. It also acts to show where the page groupings strategy interacts with the standard buddy allocator. Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Mel Gorman authored
The freelists for each migrate type can slowly become polluted due to the per-cpu list. Consider what happens when the following happens 1. A 2^(MAX_ORDER-1) list is reserved for __GFP_MOVABLE pages 2. An order-0 page is allocated from the newly reserved block 3. The page is freed and placed on the per-cpu list 4. alloc_page() is called with GFP_KERNEL as the gfp_mask 5. The per-cpu list is used to satisfy the allocation This results in a kernel page is in the middle of a migratable region. This patch prevents this leak occuring by storing the MIGRATE_ type of the page in page->private. On allocate, a page will only be returned of the desired type, else more pages will be allocated. This may temporarily allow a per-cpu list to go over the pcp->high limit but it'll be corrected on the next free. Care is taken to preserve the hotness of pages recently freed. The additional code is not measurably slower for the workloads we've tested. Signed-off-by:
-
Mel Gorman authored
This patch adds the core of the fragmentation reduction strategy. It works by grouping pages together based on their ability to migrate or be reclaimed. Basically, it works by breaking the list in zone->free_area list into MIGRATE_TYPES number of lists. Signed-off-by:
-
Mel Gorman authored
Here is the latest revision of the anti-fragmentation patches. Of particular note in this version is special treatment of high-order atomic allocations. Care is taken to group them together and avoid grouping pages of other types near them. Artifical tests imply that it works. I'm trying to get the hardware together that would allow setting up of a "real" test. If anyone already has a setup and test that can trigger the atomic-allocation problem, I'd appreciate a test of these patches and a report. The second major change is that these patches will apply cleanly with patches that implement anti-fragmentation through zones. kernbench shows effectively no performance difference varying between -0.2% and +2% on a variety of test machines. Success rates for huge page allocation are dramatically increased. For example, on a ppc64 machine, the vanilla kernel was only able to allocate 1% of memory as a hugepage and this was due to a single hugepage reserved as min_free_kbytes. With these patches applied, 17% was allocatable as superpages. With reclaim-related fixes from Andy Whitcroft, it was 40% and further reclaim-related improvements should increase this further. Changelog Since V28 o Group high-order atomic allocations together o It is no longer required to set min_free_kbytes to 10% of memory. A value of 16384 in most cases will be sufficient o Now applied with zone-based anti-fragmentation o Fix incorrect VM_BUG_ON within buffered_rmqueue() o Reorder the stack so later patches do not back out work from earlier patches o Fix bug were journal pages were being treated as movable o Bias placement of non-movable pages to lower PFNs o More agressive clustering of reclaimable pages in reactions to workloads like updatedb that flood the size of inode caches Changelog Since V27 o Renamed anti-fragmentation to Page Clustering. Anti-fragmentation was giving the mistaken impression that it was the 100% solution for high order allocations. Instead, it greatly increases the chances high-order allocations will succeed and lays the foundation for defragmentation and memory hot-remove to work properly o Redefine page groupings based on ability to migrate or reclaim instead of basing on reclaimability alone o Get rid of spurious inits o Per-cpu lists are no longer split up per-type. Instead the per-cpu list is searched for a page of the appropriate type o Added more explanation commentary o Fix up bug in pageblock code where bitmap was used before being initalised Changelog Since V26 o Fix double init of lists in setup_pageset Changelog Since V25 o Fix loop order of for_each_rclmtype_order so that order of loop matches args o gfpflags_to_rclmtype uses gfp_t instead of unsigned long o Rename get_pageblock_type() to get_page_rclmtype() o Fix alignment problem in move_freepages() o Add mechanism for assigning flags to blocks of pages instead of page->flags o On fallback, do not examine the preferred list of free pages a second time The purpose of these patches is to reduce external fragmentation by grouping pages of related types together. When pages are migrated (or reclaimed under memory pressure), large contiguous pages will be freed. This patch works by categorising allocations by their ability to migrate; Movable - The pages may be moved with the page migration mechanism. These are generally userspace pages. Reclaimable - These are allocations for some kernel caches that are reclaimable or allocations that are known to be very short-lived. Unmovable - These are pages that are allocated by the kernel that are not trivially reclaimed. For example, the memory allocated for a loaded module would be in this category. By default, allocations are considered to be of this type HighAtomic - These are high-order allocations belonging to callers that cannot sleep or perform any IO. In practice, this is restricted to jumbo frame allocation for network receive. It is assumed that the allocations are short-lived Instead of having one MAX_ORDER-sized array of free lists in struct free_area, there is one for each type of reclaimability. Once a 2^MAX_ORDER block of pages is split for a type of allocation, it is added to the free-lists for that type, in effect reserving it. Hence, over time, pages of the different types can be clustered together. When the preferred freelists are expired, the largest possible block is taken from an alternative list. Buddies that are split from that large block are placed on the preferred allocation-type freelists to mitigate fragmentation. This implementation gives best-effort for low fragmentation in all zones. Ideally, min_free_kbytes needs to be set to a value equal to 4 * (1 << (MAX_ORDER-1)) pages in most cases. This would be 16384 on x86 and x86_64 for example. Our tests show that about 60-70% of physical memory can be allocated on a desktop after a few days uptime. In benchmarks and stress tests, we are finding that 80% of memory is available as contiguous blocks at the end of the test. To compare, a standard kernel was getting < 1% of memory as large pages on a desktop and about 8-12% of memory as large pages at the end of stress tests. Following this email are 12 patches that implement thie page grouping feature. The first patch introduces a mechanism for storing flags related to a whole block of pages. Then allocations are split between movable and all other allocations. Following that are patches to deal with per-cpu pages and make the mechanism configurable. The next patch moves free pages between lists when partially allocated blocks are used for pages of another migrate type. The second last patch groups reclaimable kernel allocations such as inode caches together. The final patch related to groupings keeps high-order atomic allocations. The last two patches are more concerned with control of fragmentation. The second last patch biases placement of non-movable allocations towards the start of memory. This is with a view of supporting memory hot-remove of DIMMs with higher PFNs in the future. The biasing could be enforced a lot heavier but it would cost. The last patch agressively clusters reclaimable pages like inode caches together. The fragmentation reduction strategy needs to track if pages within a block can be moved or reclaimed so that pages are freed to the appropriate list. This patch adds a bitmap for flags affecting a whole a MAX_ORDER block of pages. In non-SPARSEMEM configurations, the bitmap is stored in the struct zone and allocated during initialisation. SPARSEMEM statically allocates the bitmap in a struct mem_section so that bitmaps do not have to be resized during memory hotadd. This wastes a small amount of memory per unused section (usually sizeof(unsigned long)) but the complexity of dynamically allocating the memory is quite high. Additional credit to Andy Whitcroft who reviewed up an earlier implementation of the mechanism an suggested how to make it a *lot* cleaner. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after* set_pte(). This is too late. This patch removes lazy_mmu_prot_update and add modfied set_pte() for flushing if necessary. This patch flush icache of a page when new pte has exec bit. && new pte has present bit && new pte is user's page. && (old *ptep is not present || new pte's pfn is not same to old *ptep's ptn) && new pte's page has no Pg_arch_1 bit. Pg_arch_1 is set when a page is cache consistent. I think this condition checks are much easier to understand than considering "Where sync_icache_dcache() should be inserted ?". pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as clean-up. So, I added it again. Signed-off-by:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
In migration, a new page should be cache flushed before set_pte() in some archs which have virtually-tagged cache. Signed-off-by:
-
Andrea Arcangeli authored
Swappiness isn't a safe sysctl. Setting it to 0 for example can hang a system. That's a corner case but even setting it to 10 or lower can waste enormous amounts of cpu without making much progress. We've customers who wants to use swappiness but they can't because of the current implementation (if you change it so the system stops swapping it really stops swapping and nothing works sane anymore if you really had to swap something to make progress). This patch from Kurt Garloff makes swappiness safer to use (no more huge cpu usage or hangs with low swappiness values). I think the prev_priority can also be nuked since it wastes 4 bytes per zone (that would be an incremental patch but I wait the nr_scan_[in]active to be nuked first for similar reasons). Clearly somebody at some point noticed how broken that thing was and they had to add min(priority, prev_priority) to give it some reliability, but they didn't go the last mile to nuke prev_priority too. Calculating distress only in function of not-racy priority is correct and sure more than enough without having to add randomness into the equation. Patch is tested on older kernels but it compiles and it's quite simple so... Overall I'm not very satisified by the swappiness tweak, since it doesn't rally do anything with the dirty pagecache that may be inactive. We need another kind of tweak that controls the inactive scan and tunes the can_writepage feature (not yet in mainline despite having submitted it a few times), not only the active one. That new tweak will tell the kernel how hard to scan the inactive list for pure clean pagecache (something the mainline kernel isn't capable of yet). We already have that feature working in all our enterprise kernels with the default reasonable tune, or they can't even run a readonly backup with tar without triggering huge write I/O. I think it should be available also in mainline later. Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
Kurt Garloff <garloff@suse.de> Signed-off-by:
Andrea Arcangeli <andrea@suse.de> Signed-off-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by:
-
Christoph Lameter authored
The function of GFP_LEVEL_MASK seems to be unclear. In order to clear up the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP flags: GFP_RECLAIM_MASK Flags used to control page allocator reclaim behavior. GFP_CONSTRAINT_MASK Flags used to limit where allocations can occur. GFP_SLAB_BUG_MASK Flags that the slab allocator BUG()s on. These replace the uses of GFP_LEVEL mask in the slab allocators and in vmalloc.c. The use of the flags not included in these sets may occur as a result of a slab allocation standing in for a page allocation when constructing scatter gather lists. Extraneous flags are cleared and not passed through to the page allocator. __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will now be ignored if passed to a slab allocator. Change the allocation of allocator meta data in SLAB and vmalloc to not pass through flags listed in GFP_CONSTRAINT_MASK. SLAB already removes the __GFP_THISNODE flag for such allocations. Generalize that to also cover vmalloc. The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL. The impact of allocator metadata placement on access latency to the cachelines of the object itself is minimal since metadata is only referenced on alloc and free. The attempt is still made to place the meta data optimally but we consistently allow fallback both in SLAB and vmalloc (SLUB does not need to allocate metadata like that). Allocator metadata may serve multiple in kernel users and thus should not be subject to the limitations arising from a single allocation context. [akpm@linux-foundation.org: fix fallback_alloc()] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Yasunori Goto authored
When a cpu is onlined on memory-less-node box, kernel panics due to touch NULL pointer of pgdat->kswapd. Current kswapd runs only nodes which have memory. So, calling of set_cpus_allowed() is not necessary for memory-less node. This is fix for it. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Lee Schermerhorn authored
Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
-
Christoph Lameter authored
cpusets try to ensure that any node added to a cpuset's mems_allowed is on-line and contains memory. The assumption was that online nodes contained memory. Thus, it is possible to add memoryless nodes to a cpuset and then add tasks to this cpuset. This results in continuous series of oom-kill and apparent system hang. Change cpusets to use node_states[N_HIGH_MEMORY] [a.k.a. node_memory_map] in place of node_online_map when vetting memories. Return error if admin attempts to write a non-empty mems_allowed node mask containing only memoryless-nodes. Signed-off-by:
Bob Picco <bob.picco@hp.com> Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by:
-
Christoph Lameter authored
GFP_THISNODE checks that the zone selected is within the pgdat (node) of the first zone of a nodelist. That only works if the node has memory. A memoryless node will have its first node on another pgdat (node). GFP_THISNODE currently will return simply memory on the first pgdat. Thus it is returning memory on other nodes. GFP_THISNODE should fail if there is no local memory on a node. Add a new set of zonelists for each node that only contain the nodes that belong to the zones itself so that no fallback is possible. Then modify gfp_type to pickup the right zone based on the presence of __GFP_THISNODE. Drop the existing GFP_THISNODE checks from the page_allocators hot path. Signed-off-by:
-
Christoph Lameter authored
get_pfn_range_for_nid() is called multiple times for each node at boot time. Each time, it will warn about nodes with no memory, resulting in boot messages like: Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory On node 0 totalpages: 0 Node 0 active with no memory Node 0 active with no memory DMA zone: 0 pages used for memmap Node 0 active with no memory Node 0 active with no memory Normal zone: 0 pages used for memmap Node 0 active with no memory Node 0 active with no memory Movable zone: 0 pages used for memmap and so on for each memoryless node. We already have the "On node N totalpages: ..." and other related messages, so drop the "Node N active with no memory" warnings. Signed-off-by: -
Christoph Lameter authored
We need the check for a node with cpu in zone reclaim. Zone reclaim will not allow remote zone reclaim if a node has a cpu. [Lee.Schermerhorn@hp.com: Move setup of N_CPU node state mask] Signed-off-by:
-
Christoph Lameter authored
Online nodes now may have no memory. The checks and initialization must therefore be changed to no longer use the online functions. This will correctly initialize the interleave on bootup to only target nodes with memory and will make sys_move_pages return an error when a page is to be moved to a memoryless node. Similarly we will get an error if MPOL_BIND and MPOL_INTERLEAVE is used on a memoryless node. These are somewhat new semantics. So far one could specify memoryless nodes and we would maybe do the right thing and just ignore the node (or we'd do something strange like with MPOL_INTERLEAVE). If we want to allow the specification of memoryless nodes via memory policies then we need to keep checking for online nodes. Signed-off-by:
-
Christoph Lameter authored
Processors on memoryless nodes must be able to fall back to remote nodes in order to get a profiling buffer. This may lead to excessive NUMA traffic but I think we should allow this rather than failing. Signed-off-by:
-
Christoph Lameter authored
The checks for node_online in the uncached allocator are made to make sure that memory is available on these nodes. Thus switch all the checks to use N_HIGH_MEMORY and to N_ONLINE. Signed-off-by:
Jes Sorensen <jes@sgi.com> Acked-by:
-
Christoph Lameter authored
Simply switch all for_each_online_node to for_each_node_state(NORMAL_MEMORY). That way SLUB only operates on nodes with regular memory. Any allocation attempt on a memoryless node or a node with just highmem will fall whereupon SLUB will fetch memory from a nearby node (depending on how memory policies and cpuset describe fallback). Signed-off-by:
-
Christoph Lameter authored
Slab should not allocate control structures for nodes without memory. This may seem to work right now but its unreliable since not all allocations can fall back due to the use of GFP_THISNODE. Switching a few for_each_online_node's to N_NORMAL_MEMORY will allow us to only allocate for nodes that have regular memory. Signed-off-by:
-
Christoph Lameter authored
A node without memory does not need a kswapd. So use the memory map instead of the online map when starting kswapd. Signed-off-by:
-
Christoph Lameter authored
constrained_alloc() builds its own memory map for nodes with memory. We have that available in N_HIGH_MEMORY now. So simplify the code. Signed-off-by:
-
Christoph Lameter authored
MPOL_INTERLEAVE currently simply loops over all nodes. Allocations on memoryless nodes will be redirected to nodes with memory. This results in an imbalance because the neighboring nodes to memoryless nodes will get significantly more interleave hits that the rest of the nodes on the system. We can avoid this imbalance by clearing the nodes in the interleave node set that have no memory. If we use the node map of the memory nodes instead of the online nodes then we have only the nodes we want. Signed-off-by:
-
Christoph Lameter authored
It is necessary to know if nodes have memory since we have recently begun to add support for memoryless nodes. For that purpose we introduce a two new node states: N_HIGH_MEMORY and N_NORMAL_MEMORY. A node has its bit in N_HIGH_MEMORY set if it has any memory regardless of the type of mmemory. If a node has memory then it has at least one zone defined in its pgdat structure that is located in the pgdat itself. A node has its bit in N_NORMAL_MEMORY set if it has a lower zone than ZONE_HIGHMEM. This means it is possible to allocate memory that is not subject to kmap. N_HIGH_MEMORY and N_NORMAL_MEMORY can then be used in various places to insure that we do the right thing when we encounter a memoryless node. [akpm@linux-foundation.org: build fix] [Lee.Schermerhorn@hp.com: update N_HIGH_MEMORY node state for memory hotadd] [y-goto@jp.fujitsu.com: Fix memory hotplug + sparsemem build] Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Christoph Lameter authored
Why do we need to support memoryless nodes? KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote: > For fujitsu, problem is called "empty" node. > > When ACPI's SRAT table includes "possible nodes", ia64 bootstrap(acpi_numa_init) > creates nodes, which includes no memory, no cpu. > > I tried to remove empty-node in past, but that was denied. > It was because we can hot-add cpu to the empty node. > (node-hotplug triggered by cpu is not implemented now. and it will be ugly.) > > > For HP, (Lee can comment on this later), they have memory-less-node. > As far as I hear, HP's machine can have following configration. > > (example) > Node0: CPU0 memory AAA MB > Node1: CPU1 memory AAA MB > Node2: CPU2 memory AAA MB > Node3: CPU3 memory AAA MB > Node4: Memory XXX GB > > AAA is very small value (below 16MB) and will be omitted by ia64 bootstrap. > After boot, only Node 4 has valid memory (but have no cpu.) > > Maybe this is memory-interleave by firmware config. Christoph Lameter <clameter@sgi.com> wrote: > Future SGI platforms (actually also current one can have but nothing like > that is deployed to my knowledge) have nodes with only cpus. Current SGI > platforms have nodes with just I/O that we so far cannot manage in the > core. So the arch code maps them to the nearest memory node. Lee Schermerhorn <Lee.Schermerhorn@hp.com> wrote: > For the HP platforms, we can configure each cell with from 0% to 100% > "cell local memory". When we configure with <100% CLM, the "missing > percentages" are interleaved by hardware on a cache-line granularity to > improve bandwidth at the expense of latency for numa-challenged > applications [and OSes, but not our problem ;-)]. When we boot Linux on > such a config, all of the real nodes have no memory--it all resides in a > single interleaved pseudo-node. > > When we boot Linux on a 100% CLM configuration [== NUMA], we still have > the interleaved pseudo-node. It contains a few hundred MB stolen from > the real nodes to contain the DMA zone. [Interleaved memory resides at > phys addr 0]. The memoryless-nodes patches, along with the zoneorder > patches, support this config as well. > > Also, when we boot a NUMA config with the "mem=" command line, > specifying less memory than actually exists, Linux takes the excluded > memory "off the top" rather than distributing it across the nodes. This > can result in memoryless nodes, as well. > This patch: Preparation for memoryless node patches. Provide a generic way to keep nodemasks describing various characteristics of NUMA nodes. Remove the node_online_map and the node_possible map and realize the same functionality using two nodes stats: N_POSSIBLE and N_ONLINE. [Lee.Schermerhorn@hp.com: Initialize N_*_MEMORY and N_CPU masks for non-NUMA config] Signed-off-by:
-
Nick Piggin authored
prepare/commit_write no longer returns AOP_TRUNCATED_PAGE since OCFS2 and GFS2 were converted to the new aops, so we can make some simplifications for that. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Nick Piggin authored
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is now implemented in a way that does not create blocks in sparse regions, which is a silly thing for it to have been doing (isn't it?) ext2 survives fsx and fsstress. jfs is converted as well... ext3 should be easy to do (but not done yet). [akpm@linux-foundation.org: coding-style fixes] Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
-
Nick Piggin authored
Plug ocfs2 into the ->write_begin and ->write_end aops. A bunch of custom code is now gone - the iovec iteration stuff during write and the ocfs2 splice write actor. Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by:
-
Nick Piggin authored
Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Nick Piggin authored
Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Convert udf to new aops. Also seem to have fixed pagecache corruption in udf_adinicb_commit_write -- page was marked uptodate when it is not. Also, fixed the silly setup where prepare_write was doing a kmap to be used in commit_write: just do kmap_atomic in write_end. Use libfs helpers to make this easier. Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
This also gets rid of a lot of useless read_file stuff. And also optimises the full page write case by marking a !uptodate page uptodate. Signed-off-by:
-
Nick Piggin authored
[mszeredi] - don't send zero length write requests - it is not legal for the filesystem to return with zero written bytes Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
[akpm@linux-foundation.org: fix against git-nfs] [peterz@infradead.org: fix against git-nfs] Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
