From: Chris Mason <mason@suse.com>

reiserfs_unmap_buffer should clean and wait on all buffers.  This fixes a
leak under fsx workloads.

From: Chris Mason <mason@suse.com>

Add reiserfs support for laptop mode.

From: Chris Mason <mason@suse.com>

reiserfs_file_write makes a hole one block too large if it is the first thing
in the file.

From: Chris Mason <mason@suse.com>

Fix reiserfs_writepage so it doesn't race with data=ordered writes.  This
still has a pending fix to redirty the page when it finds a locked buffer. 
Waiting for Andrew to finish sorting that out on ext3 first.

From: Chris Mason <mason@suse.com>

Repacking a tail might leave a journal handle attached to an unmapped buffer.
 If that buffer gets dirtied again (via mmap for example), the reiserfs
data=ordered code might try to write the dirty unmapped buffer to disk.

The fix is to make sure we remove the journal handle when we unmap buffers.

From: Chris Mason <mason@suse.com>

Enable preallocation for reiserfs_file_write when the write size is smaller
than the default preallocation size.

From: Chris Mason <mason@suse.com>

Make sure to hold the BKL while ending a transaction in the error path or
reiserfs_prepare_write.

From: Chris Mason <mason@suse.com>

reiserfs data=ordered support.

From: Chris Mason <mason@suse.com>

reiserfs logging rework, making things much faster for small transactions. 
metadata buffers are dirtied when they are safe to write, so normal kernel
mechanisms can contribute to log cleaning.

From: Chris Mason <mason@suse.com>

reiserfs cleanup, get rid of old debugging code.

From: Chris Mason <mason@suse.com>

reiserfs support for nested transactions.  This originally came from Peter
Braam for 2.4.x and was ported forward by Jeff Mahoney.

ext3 transaction batching has been ineffective since the scheduler changes
forced us to replace the yield() with a schedule().

Using schedule_timeout(1) fixes it up again.  Benchmarking is positive with
wither a 1 or 10 millisecond delay in there, so there appears to be no need
to play around with HZ.

From: Kurt Garloff <garloff@suse.de>

A patch to parse the elf binaries for a PT_GNU_STACK section to set the stack
non-executable if possible.  Most parts have been shamelessly stolen from
Ingo Molnar's more ambitious stackshield
http://people.redhat.com/mingo/exec-shield/exec-shield-2.6.4-C9

The toolchain has meanwhile support for marking the binaries with a
PT_GNU_STACK section wwithout x bit as needed.

If no such section is found, we leave the stack to whatever the arch defaults
to.  If there is one, we explicitly disabled the VM_EXEC bit if no x bit is
found, otherwise explicitly enable.

- s/__inline__/inline/

- Remove lots of extraneous andi-was-here trailing whitespace

From: "Paul E. McKenney" <paulmck@us.ibm.com>

The attached patch improves the documentation of the _rcu list primitives.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

IBM LAN Adapter/A driver depends on mca-legacy.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/net/wan/cycx_drv.c: In function `load_cyc2x':
drivers/net/wan/cycx_drv.c:430: warning: unsigned int format, long unsigned int arg (arg 3)

From: Pavel Machek <pavel@ucw.cz>

This function will break with -mregparm, so mark it asmlinkage.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/media/dvb/frontends/tda1004x.c:191: warning: `errno' defined but not used

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

sound/isa/wavefront/wavefront_synth.c:1923: warning: `errno' defined but not used

With CONFIG_LBD=n:

fs/open.c: In function `vfs_statfs_native':
fs/open.c:67: warning: comparison is always true due to limited range of data type
fs/open.c:70: warning: comparison is always true due to limited range of data type

From: Olaf Kirch <okir@suse.de>

The attached patch fixes a problem with the 32bit statfs call on NFS file
systems.  Some NFS servers return a value of -1 for the f_files and f_ffree.
The current code would think this is a 64bit value that cannot be converted
to 32bits.  Consequently, the system call would always fail.

The patch adds two special if() to detect a value of -1 for f_files and
f_ffree.

From: Trond Myklebust <trond.myklebust@fys.uio.no>

Fixes the Oops reported by Paul Blazejowski.  Bug turned out to be in the page
overflow checking for READDIRPLUS.

From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>

From: Gerd Knorr <kraxel@bytesex.org>

This is a update for the cx88 driver.  There are *lots* of changes:

  * vbi support was added.
  * plenty of fixes for audio support (there are still problems
    through).
  * new cards added.
  * serveral minor tweaks.

From: Gerd Knorr <kraxel@bytesex.org>

This patch updates the documentation for the v4l drivers.

From: Gerd Knorr <kraxel@bytesex.org>

This patch updates the bttv driver.  Changes:

  (1) several card-specific tweaks.
  (2) make software vs. hardware i2c configurable per TV card.
  (3) reinitialize image parameters after chip reset.
  (4) make bttv quite by default on frame drops.
  (5) new insmod option: "debug_latency=1" to enable frame drop
      debug messages.

bttv is quite sensitive to irq latencies, especially when capturing both
video and vbi.  There are several reports about problems due to this, I don't
see that on my machines through.  (5) dumps a stracktrace if the driver
thinks the frame drop is is caused by high latencies as experiment, lets see
whenever that helps ...

drivers/built-in.o(.text+0x32912b): In function `dsp_buffer_init':
drivers/media/video/saa7134/saa7134-oss.c:77: undefined reference to `videobuf_dma_init'

From: Gerd Knorr <kraxel@bytesex.org>

This is a update for the saa7134 driver.  Changes:

  * add cropping support.
  * fix Makefile to build the saa6752hs module.
  * fix locking bug in oss dsp driver.
  * infrared remote keytable update.
  * some card-specific fixes.

From: Gerd Knorr <kraxel@bytesex.org>

Trivial patch, $subject says all, just a new keytable.

From: Gerd Knorr <kraxel@bytesex.org>

This patch allows to use switch to the second external input of the msp34xx
chips.  Also has some minor cleanups and more verbose debug info.

From: Gerd Knorr <kraxel@bytesex.org>

This patch fixes a bug in the tuner descriptions and prepares for the removal
of the type= insmod option by printing a warning when it is used.

From: Gerd Knorr <kraxel@bytesex.org>

Minor tweak in the v4l1 compatibility layer: Make sure that capture actually
is active before going to wait for a frame so we don't block forever.

From: Gerd Knorr <kraxel@bytesex.org>

The VIDIOC_CROPCAP ioctl had wrong R/W bits, this patch fixes it.

From: Andreas Gruenbacher <agruen@suse.de>

Return EOPNOTSUPP rather than EINVAL when we discover an ACL version
mismatch.

From: Olaf Kirch <okir@suse.de>

Some NFS clients respond badly to a TCP connection being reset immediately
after it has been accepted so:

- Accept more connections before starting to drop them

- Always drop the oldest connection - Random Early Drop doesn't really help
  here, and can hurt

- ratelimit the friendly warnings.

From: Andrea Arcangeli <andrea@suse.de>

We need a barrier before checking for kthread_should_stop in do_stop.

From: Davide Libenzi <davidel@xmailserver.org>

When I split evenpoll_release() in an inline fast path plus an
eventpoll_release_file() slow path, I forgot to change comments.

From: Romain Francoise <romain@orebokech.com>

arch/sparc64/mm/hugetlbpage.c does not include linux/module.h so
EXPORT_SYMBOL prints out warnings, and since sparc64 Makefiles have
-Werror, the build fails.

From: Olof Johansson <olof@austin.ibm.com>

As discussed on the ppc64 list yesterday and today:

On some ppc64 systems, Open Firmware will give memory device nodes that are
only 16MB in size, instead of the 256MB that our NUMA code currently
expects (see MEMORY_INCREMENT in mmzone.h).

Just changing the defines from 256MB to 16MB makes the table blow up from
32KB to 512KB, so this patch also makes it dynamically allocated based on
actual memory size.  Since all this is done before (well, during) bootmem
init so we need to use lmb_alloc().

Finally, there's no need to use a full int for node ID. Current max is 16
nodes, so a signed char still leaves plenty of room to grow.