Skip to content

L
linux
Switch branch/tag
  1. 24 Apr, 2022 6 commits
    • Hans Verkuil's avatar
      media: cec: use call_op and check for !unregistered · e2ed5024
      Hans Verkuil authored 
      Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      e2ed5024
    • Hans Verkuil's avatar
      media: cec.h: add cec_msg_recv_is_rx/tx_result helpers · 567f882a
      Hans Verkuil authored 
      These two helper functions return true if the received message
contains the result of a previous non-blocking transmit. Either
the tx_status result (cec_msg_recv_is_tx_result) of the transmit,
or the rx_status result (cec_msg_recv_is_rx_result) of the reply
to the original transmit.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      567f882a
    • Hans Verkuil's avatar
      media: cec: correctly pass on reply results · f9d0ecbf
      Hans Verkuil authored 
      The results of non-blocking transmits were not correctly communicated
to userspace.

Specifically:

1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
   as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
   never arrived (aborted or timed out), then tx_status wasn't set to 0
   as it should, and rx_status was hardcoded to ABORTED instead of the
   actual reason, such as TIMEOUT. In addition, adap->ops->received() was
   never called, so drivers that want to do message processing themselves
   would not be informed of the failed reply.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      f9d0ecbf
    • Hans Verkuil's avatar
      media: cec: abort if the current transmit was canceled · 590a8e56
      Hans Verkuil authored 
      If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.

To signal this situation the new transmit_in_progress_aborted field is
set to true.

The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      590a8e56
    • Hans Verkuil's avatar
      media: cec: call enable_adap on s_log_addrs · 3813c932
      Hans Verkuil authored 
      Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.

However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.

The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.

It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.

To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      3813c932
    • Yihao Han's avatar
      media: meson-ir-tx: remove superfluous dev_err() · 82b4737f
      Yihao Han authored 
      Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: default avatarYihao Han <hanyihao@vivo.com>
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
      82b4737f
  3. 18 Apr, 2022 26 commits
  5. 17 Apr, 2022 8 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7