- 06 Oct, 2010 8 commits
-
-
Rasesh Mody authored
This fix handles the case when IRQ handler is called (for shared IRQs) even before the driver is ready to handle interrupts. Signed-off-by:
Debashis Dutt <ddutt@brocade.com> Signed-off-by:
Rasesh Mody <rmody@brocade.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Flavio Leitner authored
Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by:
Flavio Leitner <fleitner@redhat.com> Signed-off-by:
-
Flavio Leitner authored
The IGMP specs states that if the system receives a membership report, it shouldn't send another for the next minute. However, if a link failure happens right after that, the backup slave and the switch connected to this slave will not know about the multicast and the traffic will hang for about a minute. This patch fixes it to rejoin multicast groups immediately after a failover restoring the multicast traffic. Signed-off-by:
-
Flavio Leitner authored
During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by:
-
Breno Leitao authored
Removing the msleep() call in check_sqs() function, and replacing by a wait queue. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Breno Leitao authored
This patch just remove a msleep loop and change to wait queue, making the code cleaner. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Emil Tantilov authored
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Acked-by:
Greg Rose <greg.v.rose@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
- 05 Oct, 2010 24 commits
-
-
Alban Crequy authored
Userspace applications can already request to receive timestamps with: setsockopt(sockfd, SOL_SOCKET, SO_TIMESTAMP, ...) Although setsockopt() returns zero (success), timestamps are not added to the ancillary data. This patch fixes that on SOCK_DGRAM and SOCK_SEQPACKET Unix sockets. Signed-off-by:
Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by:
-
Eric Dumazet authored
David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: -
Eric Dumazet authored
neigh_delete() and neigh_add() dont need to touch device refcount, we hold RTNL when calling them, so device cannot disappear under us. Signed-off-by:
-
Eric Dumazet authored
In various situations, a device provides a packet to our stack and we drop it before it enters protocol stack : - softnet backlog full (accounted in /proc/net/softnet_stat) - bad vlan tag (not accounted) - unknown/unregistered protocol (not accounted) We can handle a per-device counter of such dropped frames at core level, and automatically adds it to the device provided stats (rx_dropped), so that standard tools can be used (ifconfig, ip link, cat /proc/net/dev) This is a generalization of commit 8990f468 (net: rx_dropped accounting), thus reverting it. Signed-off-by:
-
David S. Miller authored
Do this instead of subverting fields in skb proper. The macros that could very easily match variable or function names were also just asking for trouble. Signed-off-by: -
stephen hemminger authored
Another exported symbol only used in one file Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
-
stephen hemminger authored
fib_rules_cleanup_ups is only defined and used in one place. Signed-off-by:
-
Eric Dumazet authored
Code style cleanups before upcoming functional changes. C99 initializer for fib_props array. Signed-off-by:
-
stephen hemminger authored
Make wimax variables and functions local if possible. Compile tested only. This also removes a couple of unused EXPORT_SYMBOL. If this breaks some out of tree code, please fix that by putting the code in the kernel tree. Signed-off-by:
-
stephen hemminger authored
This driver has several pieces of dead code (found by running make namespacecheck). This patch removes them. Signed-off-by:
-
Nicolas Kaiser authored
Remove duplicated include. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Acked-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
-
Uwe Kleine-König authored
The kernel doesn't have a symbol called BCM63XX. There is a symbol BCM63XX_ENET (introduced in 9b1fc55a, 6 weeks after 09bb9aa0 that introduced BCM63XX_PHY), but the driver compiles without that, too. Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by:
-
David S. Miller authored
rtnl_dereference() is used in contexts where RTNL is held, to fetch an RCU protected pointer. Updates to this pointer are prevented by RTNL, so we dont need smp_read_barrier_depends() and the ACCESS_ONCE() provided in rcu_dereference_check(). rtnl_dereference() is mainly a macro to document the locking invariant. Signed-off-by:
-
David S. Miller authored
Signed-off-by:
Simon Horman <horms@verge.net.au>
-
Eric Dumazet authored
ingress being not used very much, and net_device->ingress_queue being quite a big object (128 or 256 bytes), use a dynamic allocation if needed (tc qdisc add dev eth0 ingress ...) dev_ingress_queue(dev) helper should be used only with RTNL taken. Signed-off-by:
-
Sritej Velaga authored
Setting mtu < 68 is not supported. Signed-off-by:
Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Sritej Velaga authored
Port mode setting is not required for Qlogic CNA adapters. Signed-off-by:
-
Sucheta Chakraborty authored
Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Sucheta Chakraborty authored
o desc->vlan_tci is in __le16 format. Doing htons and cpu_to_le64 again on vlan_tci, result in invalid value on ppc. Signed-off-by:
-
Sucheta Chakraborty authored
ipaddress in ifa->ifa_address field are in big endian format. Also device requires ip address in big endian only. Signed-off-by:
-
Amit Kumar Salecha authored
regs_buff[i] and diag_registers[j] array should use different index variable. Signed-off-by:
-
Amit Kumar Salecha authored
Some of the counters are not implemented in fw. Fw return NOT AVAILABLE VALUE as (0xffffffffffffffff). Adding these counters, result in invalid value. Signed-off-by:
-
Amit Kumar Salecha authored
o Loop 10 times with delay of 1 ms to rcv packet. o Print garbage packet. o Try send/receive MAX(16) packet, instead of exit from test, if a packet is not received. Signed-off-by:
-
- 04 Oct, 2010 8 commits
-
-
David S. Miller authored
Conflicts: net/ipv4/Kconfig net/ipv4/tcp_timer.c
-
Eric Dumazet authored
While doing stress tests with IP route cache disabled, and multi queue devices, I noticed a very high contention on one rwlock used in neighbour code. When many cpus are trying to send frames (possibly using a high performance multiqueue device) to the same neighbour, they fight for the neigh->lock rwlock in order to call neigh_hh_init(), and fight on hh->hh_refcnt (a pair of atomic_inc/atomic_dec_and_test()) But we dont need to call neigh_hh_init() for dst that are used only once. It costs four atomic operations at least, on two contended cache lines, plus the high contention on neigh->lock rwlock. Introduce a new dst flag, DST_NOCACHE, that is set when dst was not inserted in route cache. With the stress test bench, sending 160000000 frames on one neighbour, results are : Before patch: real 2m28.406s user 0m11.781s sys 36m17.964s After patch: real 1m26.532s user 0m12.185s sys 20m3.903s Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Sathya Perla authored
This patch adds multiple RX queue support to be2net. There are upto 4 extra rx-queues per port into which TCP/UDP traffic can be hashed into. Some of the ethtool stats are now displayed on a per queue basis. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
Ursula Braun authored
This patch adapts qeth to handle tagged frames with VLAN-ID 0 and with or without priority information in the tag. It enables qeth to receive priority-tagged frames on a base interface, for example from z/OS, without configuring an additional VLAN interface. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Dimitris Michailidis authored
Remove a bogus PCI function number check from the driver's .remove method that causes pci_release_regions not to be called for function 0 if additional functions are attached and one of them is used as primary. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
-
Julia Lawall authored
This code does not call deinit_card(card); in an error case, as done in other error-handling code in the same function. But actually, the called function init_sram can only return 0, so there is no need for the error check at all. init_sram is also given a void return type, and its single return statement at the end of the function is dropped. A simplified version of the sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ @r@ statement S1,S2,S3; constant C1,C2,C3; @@ *if (...) {... S1 return -C1;} ... *if (...) {... when != S1 return -C2;} ... *if (...) {... S1 return -C3;} // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
