- 10 Feb, 2016 24 commits
-
-
Gabriel de Perthuis authored
[ Upstream commit d7076f21 ] Allows to use register, not register_quiet in udev to avoid "device_busy" error. The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis <g2p.code@gmail.com> does not unlock the mutex and hangs the kernel. See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion. Cc: Denis Bychkov <manover@gmail.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Zheng Liu authored
[ Upstream commit 2ecf0cdb ] In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Tested-by:
Joshua Schmid <jschmid@suse.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit 4d4d8573 ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Tested-by:
-
Zheng Liu authored
[ Upstream commit fecaee6f ] This bug can be reproduced by the following script: #!/bin/bash bcache_sysfs="/sys/fs/bcache" function clear_cache() { if [ ! -e $bcache_sysfs ]; then echo "no bcache sysfs" exit fi cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}') sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach" sleep 5 sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach" } for ((i=0;i<10;i++)); do clear_cache done The warning messages look like below: [ 275.948611] ------------[ cut here ]------------ [ 275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P W --------------- ) [ 275.979253] Hardware name: Tecal RH2285 [ 275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache' [ 276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.072643] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.089315] Call Trace: [ 276.105801] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.122650] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.139361] [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0 [ 276.156012] [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170 [ 276.172682] [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20 [ 276.189282] [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache] [ 276.205993] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.222794] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.239680] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.256594] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.273364] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.290133] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.306368] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]--- [ 276.338241] ------------[ cut here ]------------ [ 276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720 bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P W --------------- ) [ 276.386017] Hardware name: Tecal RH2285 [ 276.401430] Couldn't create device <-> cache set symlinks [ 276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.465477] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.482169] Call Trace: [ 276.498610] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.515405] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.532059] [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache] [ 276.548808] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.565569] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.582418] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.599341] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.616142] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.632607] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.648671] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]--- We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach() function when we attach a backing device first time. After detaching this backing device, this flag will be true and sysfs_remove_link() isn't called in bcache_device_unlink(). Then when we attach this backing device again, sysfs_create_link() will return EEXIST error in bcache_device_link(). So the fix is trival and we clear this flag in bcache_device_link(). Signed-off-by:
-
Kent Overstreet authored
[ Upstream commit c5f1e5ad ] Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Zheng Liu authored
[ Upstream commit 2ef9ccbf ] Subject : [PATCH v2] bcache: fix a livelock in btree lock Date : Wed, 25 Feb 2015 20:32:09 +0800 (02/25/2015 04:32:09 AM) This commit tries to fix a livelock in bcache. This livelock might happen when we causes a huge number of cache misses simultaneously. When we get a cache miss, bcache will execute the following path. ->cached_dev_make_request() ->cached_dev_read() ->cached_lookup() ->bch->btree_map_keys() ->btree_root() <------------------------ ->bch_btree_map_keys_recurse() | ->cache_lookup_fn() | ->cached_dev_cache_miss() | ->bch_btree_insert_check_key() -| [If btree->seq is not equal to seq + 1, we should return EINTR and traverse btree again.] In bch_btree_insert_check_key() function we first need to check upgrade flag (op->lock == -1), and when this flag is true we need to release read btree->lock and try to take write btree->lock. During taking and releasing this write lock, btree->seq will be monotone increased in order to prevent other threads modify this in cache miss (see btree.h:74). But if there are some cache misses caused by some requested, we could meet a livelock because btree->seq is always changed by others. Thus no one can make progress. This commit will try to take write btree->lock if it encounters a race when we traverse btree. Although it sacrifice the scalability but we can ensure that only one can modify the btree. Signed-off-by:
-
Larry Finger authored
[ Upstream commit f99551a2 ] In commit 38506ece (rtlwifi: rtl_pci: Start modification for new drivers), a bug was introduced that causes a NULL pointer dereference. As this bug only affects the infrequently used RTL8192EE and only under low-memory conditions, it has taken a long time for the bug to show up. The bug was reported on the linux-wireless mailing list and also at https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10). Fixes: 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit ade14a7d ] If a NFSv4 client uses the cache_consistency_bitmask in order to request only information about the change attribute, timestamps and size, then it has not revalidated all attributes, and hence the attribute timeout timestamp should not be updated. Reported-by:
Donald Buczek <buczek@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit cd812599 ] Setting the change attribute has been mandatory for all NFS versions, since commit 3a1556e8 ("NFSv2/v3: Simulate the change attribute"). We should therefore not have anything be conditional on it being set/unset. Signed-off-by:
-
Larry Finger authored
[ Upstream commit b68d0ae7 ] This driver fails to copy the module parameter for software encryption to the locations used by the main code. Signed-off-by:
-
Larry Finger authored
[ Upstream commit b24f19f1 ] The module parameter for software encryption was never transferred to the location used by the driver. Signed-off-by:
-
Larry Finger authored
[ Upstream commit 7503efbd ] Two of the module parameter descriptions show incorrect default values. In addition the value for software encryption is not transferred to the locations used by the driver. Signed-off-by:
-
Larry Finger authored
[ Upstream commit d4d60b4c ] Two of the module parameters are listed with incorrect default values. Signed-off-by:
-
Larry Finger authored
[ Upstream commit 06f34572 ] In this driver, parameters disable_watchdog and sw_crypto are never copied into the locations used in the main code. While modifying the parameter handling, the copying of parameter msi_support is moved to be with the rest. Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 1b9f2372 ] The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by:
Markus Elfring <elfring@users.sourceforge.net> igned-off-by:
Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chen Yu authored
[ Upstream commit 4511f716 ] When a new cooling device is registered, we need to update the thermal zone to set the new registered cooling device to a proper state. This fixes a problem that the system is cool, while the fan devices are left running on full speed after boot, if fan device is registered after thermal zone device. Here is the history of why current patch looks like this: https://patchwork.kernel.org/patch/7273041/ CC: <stable@vger.kernel.org> #3.18+ Reference:https://bugzilla.kernel.org/show_bug.cgi?id=92431Tested-by:
Manuel Krause <manuelkrause@netscape.net> Tested-by:
szegad <szegadlo@poczta.onet.pl> Tested-by:
prash <prash.n.rao@gmail.com> Tested-by:
amish <ammdispose-arch@yahoo.com> Reviewed-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit ff140fea ] Current thermal code does not handle system sleep well because 1. the cooling device cooling state may be changed during suspend 2. the previous temperature reading becomes invalid after resumed because it is got before system sleep 3. updating thermal zone device during suspending/resuming is wrong because some devices may have already been suspended or may have not been resumed. Thus, the proper way to do this is to cancel all thermal zone device update requirements during suspend/resume, and after all the devices have been resumed, reset and update every registered thermal zone devices. This also fixes a regression introduced by: Commit 19593a1f ("ACPI / fan: convert to platform driver") Because, with above commit applied, all the fan devices are attached to the acpi_general_pm_domain, and they are turned on by the pm_domain automatically after resume, without the awareness of thermal core. CC: <stable@vger.kernel.org> #3.18+ Reference: https://bugzilla.kernel.org/show_bug.cgi?id=78201 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=91411Tested-by:
Matthias <morpheusxyz123@yahoo.de> Reviewed-by:
-
Zhang Rui authored
[ Upstream commit bb431ba2 ] After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. CC: <stable@vger.kernel.org> #3.18+ Tested-by:
-
Andrew Elble authored
[ Upstream commit 361cad3c ] We've seen this in a packet capture - I've intermixed what I think was going on. The fix here is to grab the so_lock sooner. 1964379 -> #1 open (for write) reply seqid=1 1964393 -> #2 open (for read) reply seqid=2 __nfs4_close(), state->n_wronly-- nfs4_state_set_mode_locked(), changes state->state = [R] state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 1964398 -> #3 open (for write) call -> because close is already running 1964399 -> downgrade (to read) call seqid=2 (close of #1) 1964402 -> #3 open (for write) reply seqid=3 __update_open_stateid() nfs_set_open_stateid_locked(), changes state->flags state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 new sequence number is exposed now via nfs4_stateid_copy() next step would be update_open_stateflags(), pending so_lock 1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1) nfs4_close_prepare() gets so_lock and recalcs flags -> send close 1964405 -> downgrade (to read) call seqid=3 (close of #1 retry) __update_open_stateid() gets so_lock * update_open_stateflags() updates state->n_wronly. nfs4_state_set_mode_locked() updates state->state state->flags is [RW] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 * should have suppressed the preceding nfs4_close_prepare() from sending open_downgrade 1964406 -> write call 1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry) nfs_clear_open_stateid_locked() state->flags is [R] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 1964409 -> write reply (fails, openmode) Signed-off-by:
Andrew Elble <aweits@rit.edu> Cc: stable@vger,kernel.org Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit b0918d9f ] udf_next_aext() just follows extent pointers while extents are marked as indirect. This can loop forever for corrupted filesystem. Limit number the of indirect extents we are willing to follow in a row. [JK: Updated changelog, limit, style] Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: stable@vger.kernel.org Cc: Jan Kara <jack@suse.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 5c671c41 ] sdhci has a legacy facility to prevent runtime suspend if the bus power is on. This is needed in cases where the power to the card is dependent on the bus power. It is controlled by a pair of functions: sdhci_runtime_pm_bus_on() and sdhci_runtime_pm_bus_off(). These functions use a boolean variable 'bus_on' to ensure changes are always paired. There is an additional check for 'runtime_suspended' which is the problem. In fact, its use is ill-conceived as the only requirement for the logic is that 'on' and 'off' are paired, which is actually broken by the check, for example if the bus power is turned on during runtime resume. So remove the check. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit d9bfbb95 ] The 'ocr' parameter passed to mmc_set_signal_voltage() defines the power-on voltage used when power cycling after a failure to set the voltage. However, in the case of mmc_sdio_init_card(), the value passed has the R4_18V_PRESENT flag set which is not valid for power-on and results in an invalid vdd. Fix by passing the card's ocr value which does not have the flag. Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 0eb1c3d4 ] Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Felix Kuehling authored
[ Upstream commit 42ef344c ] eoffset is sometimes treated as the last address inside the address range, and sometimes as the first address outside the range. This was resulting in errors when a test filled up the entire address space. Make it consistent to always be the last address within the range. Also fixed related errors when checking the VA limit and in radeon_vm_fence_pts. Signed-off-by:
Felix.Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 02 Feb, 2016 16 commits
-
-
Christian König authored
[ Upstream commit 587cdda8 ] This allows us to add the real execution fence as shared. v2: fix typo Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit fb75a428 ] If the proxy lock in the requeue loop acquires the rtmutex for a waiter then it acquired also refcount on the pi_state related to the futex, but the waiter side does not drop the reference count. Add the missing free_pi_state() call. Signed-off-by:
-
Nikolay Borisov authored
[ Upstream commit 18d03e8c ] When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b3 ("dm thin: commit outstanding data every second") Fixes: 85ad643b ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit fcd5c4dd ] EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 84889d49 ] This patch fixes kernel crash at removing directory which contains whiteouts from lower layers. Cache of directory content passed as "list" contains entries from all layers, including whiteouts from lower layers. So, lookup in upper dir (moved into work at this stage) will return negative entry. Plus this cache is filled long before and we can race with external removal. Example: mkdir -p lower0/dir lower1/dir upper work overlay touch lower0/dir/a lower0/dir/b mknod lower1/dir/a c 0 0 mount -t overlay none overlay -o lowerdir=lower1:lower0,upperdir=upper,workdir=work rm -fr overlay/dir Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by:
-
Uri Mashiach authored
[ Upstream commit 9b2761cb ] The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [<c049c760>] lr : [<c049ebe0>] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>] (__spi_sync+0x78/0x210) [ 294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from [<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from [<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from [<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from [<c0537978>] (__dev_open+0xa8/0x110) [ 294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>] (__dev_change_flags+0x88/0x148) [ 294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>] (dev_change_flags+0x18/0x48) [ 294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Cc: stable@vger.kernel.org Signed-off-by:
-
Peter Wu authored
[ Upstream commit 17bc5586 ] Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Cc: stable@vger.kernel.org Signed-off-by:
Peter Wu <peter@lekensteyn.nl> ACKed-by:
-
Dmitry Tunin authored
[ Upstream commit 1623d0bf ] BugLink: https://bugs.launchpad.net/bugs/1522949 T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0225 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=4CBB58034671 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit ed06e069 ] We copy i_uid and i_gid of underlying inode into overlayfs inode. Except for the root inode. Fix this omission. Signed-off-by:
-
Thomas Huth authored
[ Upstream commit 760a7364 ] In the old DABR register, the BT (Breakpoint Translation) bit is bit number 61. In the new DAWRX register, the WT (Watchpoint Translation) bit is bit number 59. So to move the DABR-BT bit into the position of the DAWRX-WT bit, it has to be shifted by two, not only by one. This fixes hardware watchpoints in gdb of older guests that only use the H_SET_DABR/X interface instead of the new H_SET_MODE interface. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
David Gibson authored
[ Upstream commit 35a4933a ] 1e75fa8b "time: Condense timekeeper.xtime into xtime_sec" replaced a call to clocksource_cyc2ns() from timekeeping_get_ns() with an open-coded version of the same logic to avoid keeping a semi-redundant struct timespec in struct timekeeper. However, the commit also introduced a subtle semantic change - where clocksource_cyc2ns() uses purely unsigned math, the new version introduces a signed temporary, meaning that if (delta * tk->mult) has a 63-bit overflow the following shift will still give a negative result. The choice of 'maxsec' in __clocksource_updatefreq_scale() means this will generally happen if there's a ~10 minute pause in examining the clocksource. This can be triggered on a powerpc KVM guest by stopping it from qemu for a bit over 10 minutes. After resuming time has jumped backwards several minutes causing numerous problems (jiffies does not advance, msleep()s can be extended by minutes..). It doesn't happen on x86 KVM guests, because the guest TSC is effectively frozen while the guest is stopped, which is not the case for the powerpc timebase. Obviously an unsigned (64 bit) overflow will only take twice as long as a signed, 63-bit overflow. I don't know the time code well enough to know if that will still cause incorrect calculations, or if a 64-bit overflow is avoided elsewhere. Still, an incorrect forwards clock adjustment will cause less trouble than time going backwards. So, this patch removes the potential for intermediate signed overflow. Cc: stable@vger.kernel.org (3.7+) Suggested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit dbb17a21 ] Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by:
-
Steven Rostedt authored
[ Upstream commit 32abc2ed ] When a long value is read on 32 bit machines for 64 bit output, the parsing needs to change "%lu" into "%llu", as the value is read natively. Unfortunately, if "%llu" is already there, the code will add another "l" to it and fail to parse it properly. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20151116172516.4b79b109@gandalf.local.homeSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Malcolm Priestley authored
[ Upstream commit c9d57de6 ] When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Antonio Ospite authored
[ Upstream commit dcc7fdbe ] v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 4623e596 ] In the 3.17 kernel the poll() behavior changed for output streams: as long as not all buffers were queued up poll() would return that userspace can write. This is fine for the write() call, but when using stream I/O this changed the behavior since the expectation was that it would wait for buffers to become available for dequeuing. This patch only enables the check whether you can queue buffers for file I/O only, and skips it for stream I/O. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # for v3.17 and up Signed-off-by:
-
