- 03 Apr, 2009 40 commits
-
-
Evgeniy Polyakov authored
On Mon, Jan 19, 2009 at 10:12:24AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote: > > DST build fails when CONFIG_BLOCK=n: DST should depend on block and block device, in the original patch its kconfig entry was in the BLK_DEV menu, so this dependency was satisfied automatically. Should attached patch be pushed into drivers/staging? Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Evgeniy Polyakov authored
Kconfig help text update Signed-off-by:
-
Evgeniy Polyakov authored
Do not allow empty barriers or generic_make_request() -> scsi_setup_fs_cmnd() will explode Signed-off-by:
-
Evgeniy Polyakov authored
Added thread pool exit condition into the thread_pool_del_worker(). If called in parallel another thread can steal Signed-off-by:
-
Evgeniy Polyakov authored
Use bio prepend feature as suggested by Jens Axboe. Signed-off-by:
-
Evgeniy Polyakov authored
On Wed, Jan 14, 2009 at 02:05:33AM +0300, Evgeniy Polyakov (zbr@ioremap.net) wrote: > --- /dev/null > +++ b/drivers/staging/dst/Kconfig > @@ -0,0 +1,71 @@ > +config DST > + tristate "Distributed storage" > + depends on NET && CRYPTO && SYSFS > + select CONNECTOR > + select LIBCRC32C Above is not needed. Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Greg Kroah-Hartman authored
bus_id is going away, use the dev_set_name() function instead. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: -
Evgeniy Polyakov authored
DST may fully encrypt the data channel in case of untrusted channel and implement strong checksum of the transferred data. It is possible to configure algorithms and crypto keys, they should match on both sides of the network channel. Crypto processing does not introduce noticeble performance overhead, since DST uses configurable pool of threads to perform crypto processing. This patch introduces crypto processing helpers and crypto engine initialization: glueing with the crypto layer, allocation and initialization of the crypto processing thread pool, allocation of the cached pages, which are used to temporary encrypt data into, since it is forbidden to encrypt data in-place, since pages are used by the higher layers. Signed-off-by:
-
Evgeniy Polyakov authored
DST uses transaction model, when each store has to be explicitly acked from the remote node to be considered as successfully written. There may be lots of in-flight transactions. When remote host does not ack the transaction it will be resent predefined number of times with specified timeouts between them. All those parameters are configurable. Transactions are marked as failed after all resends completed unsuccessfully, having long enough resend timeout and/or large number of resends allows not to return error to the higher (FS usually) layer in case of short network problems or remote node outages. In case of network RAID setup this means that storage will not degrade until transactions are marked as failed, and thus will not force checksum recalculation and data rebuild. In case of connection failure DST will try to reconnect to the remote node automatically. DST sends ping commands at idle time to detect if remote node is alive. Because of transactional model it is possible to use zero-copy sending without worry of data corruption (which in turn could be detected by the strong checksums though). Transactions are handled in this patch: allocation/freeing/completion, scanning for stall and to-be-resent transactions and overall management of the storing tree. Signed-off-by:
-
Evgeniy Polyakov authored
Kernel currently does not allow to queue work into some entity which will perform it in the process context and have simple way to extend number of worker and work with them not as separate objects, but with pool as a whole. So thread pool model was implemented in the DST. Thread pool abstraction allows to schedule a work to be performed on behalf of kernel thread. One does not operate with threads itself, instead user provides setup and cleanup callbacks for thread pool itself, and action and cleanup callbacks for each submitted work. Each worker has private data initialized at creation time and data, provided by user at scheduling time. When action is being performed, thread can not be used by other users, instead they will sleep until there is free thread to pick their work. Thread pool is used for crypto processing of incoming and outgoing IO requests to reduce the overall overhead. Signed-off-by:
-
Evgeniy Polyakov authored
This patch introduces remote (export) node machinery: initialization address/port (and other socket parameters), export block device (can be another DST storage for example or local device like /dev/sda1), local IO processing engine (BIO state machines, receiving/submitting logic). Network management for the export node like accepting new client, scheduling its command processing thread, receiving/sending IO requests, all are placed here. Signed-off-by:
-
Evgeniy Polyakov authored
Each DST device contains of two nodes: local and remote (called also as export node). This patch contains local node processing engine: network state storage, socket processing loops and state machine, socket polling machinery, reconnection logic, send/receive basic helpers, related IO commands and so on. Signed-off-by:
-
Evgeniy Polyakov authored
This patch contains DST core files, which introduce block layer, connector and sysfs registration glue and main headers. Connector is used for the configuration of the node (its type, address, device name and so on). Sysfs provides bits of information about running devices in the following format: +/* + * DST sysfs tree for device called 'storage': + * + * /sys/bus/dst/devices/storage/ + * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025 + * /sys/bus/dst/devices/storage/size : 800 + * /sys/bus/dst/devices/storage/name : storage + */ DST header contains structure definitions and protocol command description. Signed-off-by:
-
David Täht authored
Signed-off-by:
David Täht <d@teklibre.com> Signed-off-by:
-
David Täht authored
Signed-off-by:
-
David Täht authored
Signed-off-by:
-
David Täht authored
Signed-off-by:
-
David Täht authored
Signed-off-by:
-
David Täht authored
Signed-off-by:
-
Peter Teoh authored
Replacing the use of kernel_thread() with kthread_run(). But as kthread_run() returned a task structure, as compared with kernel_thread() returning a PID, it was found to be more efficient to store the task structure pointer as a field data instead of PID pointer. On top of modifying the field to store task structure pointer, the initialization of the field (assigned to THREAD_PID_INIT_VALUE) was also found unnecessary - as no where it is found to be used. Signed-off-by:
Peter Teoh <htmldeveloper@gmail.com> Signed-off-by:
-
Josef Jiru authored
Updated usb device list to support Linksys WUSB600N wireless adapter Signed-off-by:Josef Jiru <josef.jiru@gmx.net>
-
Mark Einon authored
Removed the CFLAG RT2860 from Makefile and dependency on it in the driver code. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
Fixed remaining four build warnings in drivers/staging/rt2860/: drivers/staging/rt2860/common/mlme.c:900: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘ULONG’ drivers/staging/rt2860/common/rtmp_init.c:2049: warning: ‘Value’ may be used uninitialized in this function drivers/staging/rt2860/sta_ioctl.c:361: warning: ‘return’ with a value, in function returning void drivers/staging/rt2860/sta_ioctl.c:2468: warning: ‘return’ with a value, in function returning void Signed-off-by:
-
Adam McDaniel authored
Staging: rt2860: Ported v1.7.1.1 changes into v1.8.0.0, becoming v1.8.1.1 When RaLink released rt2860 v1.7.0.0, it lacked proper support for both WEP and WPA/WPA2 encryption. Either was possible, but the module had to be compiled to support only one or the other, never both. Since the EeePC was the most common device with this hardware (and these users were complaining to RaLink that WPA/WPA2 encryption didn't work) RaLink released a fix as an "eeepc-specific" version of this driver, v1.7.1.1 Unfortunately, when v1.8.0.0 was released, this WPA/WPA2 fix was never included. What complicates things further is that RaLink has no interest in continuing work on this Linux driver for their hardware. This commit ports the changes introduced in v1.7.1.1 into the v1.8.0.0 release, upgrading the kernel's module to v1.8.1.1 Signed-off-by:
Adam McDaniel <adam@array.org> Signed-off-by:
-
Randy Dunlap authored
Fix staging/rt28x0 printk format warnings: linux-next-20090209/drivers/staging/rt2860/common/spectrum.c:1599: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' linux-next-20090209/drivers/staging/rt2860/rt_linux.c:857: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' linux-next-20090209/drivers/staging/rt2870/common/spectrum.c:1598: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' linux-next-20090209/drivers/staging/rt2870/rt_linux.c:898: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by:
-
Pekka Enberg authored
The driver is in mainline now so there's no point in keeping the kernel version compatibility wrappers around. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Julia Lawall authored
IW_ENCODE_MODE is 0xF000 and thus !erq->flags & IW_ENCODE_MODE is always 0. I assume that !(erq->flags & IW_ENCODE_MODE) was intended. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Greg Kroah-Hartman authored
Andrew pointed out that I forgot to convert some files to unix format when adding them originally. This patch runs dos2unix on the rtl8187se files that needed them. Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Roel Kluin authored
Fix ! x & y problem in inactivated code Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
drivers/staging/rtl8187se/r8180_wx.c:1386: warning: initialization from incompatible pointer type drivers/staging/rtl8187se/r8180_wx.c:1388: warning: initialization from incompatible pointer type Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Randy Dunlap authored
Fix staging/rtl8187se printk format warnings: drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:845: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:852: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' Signed-off-by:
-
Randy Dunlap authored
Fix more android ram_console printk format warnings: drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by:
-
Randy Dunlap authored
Fix android printk format warnings: linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'size_t' linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t' Signed-off-by:
-
Randy Dunlap authored
Fix printk format warnings in android binder: drivers/staging/android/binder.c:2652: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t' drivers/staging/android/binder.c:2659: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t' drivers/staging/android/binder.c:2680: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t' Signed-off-by:
-
Alexander Beregalov authored
See commit bedd30d9 (genirq: make irqreturn_t an enum) Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Dragoslav Zaric authored
Signed-off-by:
Dragoslav Zaric <dragoslav.zaric.kd@gmail.com> Signed-off-by:
-
Dragoslav Zaric authored
I run make on ioctl.c file and I got two warnings: drivers/staging/otus/ioctl.c: In function ¡usbdrv_wpa_ioctl¢: drivers/staging/otus/ioctl.c:2269: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/ioctl.c: In function ¡usbdrv_ioctl¢: drivers/staging/otus/ioctl.c:2448: warning: ISO C90 forbids mixed declarations and code From: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com> Signed-off-by: -
Randy Dunlap authored
Fix otus ISO C90 warnings: drivers/staging/otus/80211core/cmmsta.c:740: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/80211core/coid.c:219: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/80211core/coid.c:1437: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:33: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:53: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:82: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:163: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:219: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:831: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hprw.c:896: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:332: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:1329: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:1565: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:1606: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:1923: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:1997: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2264: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2296: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2330: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2350: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2387: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:2425: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4223: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4283: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4314: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4380: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4425: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4531: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpmain.c:4539: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpusb.c:69: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpusb.c:334: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpusb.c:580: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpreg.c:1774: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpreg.c:2478: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:61: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:80: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:145: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:352: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:393: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:472: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:517: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:592: warning: ISO C90 forbids mixed declarations and code drivers/staging/otus/hal/hpani.c:633: warning: ISO C90 forbids mixed declarations and code Signed-off-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
-
