Commit 55e8c8eb ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.

When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.

That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.

Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free.

Fixes: 55e8c8eb ("posix-cpu-timers: Store a reference to a pid not a task")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809170751.164716-1-cascardo@canonical.com

In ns_to_kernel_old_timeval() definition, the function argument is defined
with const identifier in kernel/time/time.c, but the prototype in
include/linux/time32.h looks different.

- The function is defined in kernel/time/time.c as below:
  struct __kernel_old_timeval ns_to_kernel_old_timeval(const s64 nsec)

- The function is decalared in include/linux/time32.h as below:
  extern struct __kernel_old_timeval ns_to_kernel_old_timeval(s64 nsec);

Because the variable of arithmethic types isn't modified in the calling scope,
there's no need to mark arguments as const, which was already mentioned during 
review (Link[1) of the original patch.

Likewise remove the "const" keyword in both definition and declaration of
ns_to_timespec64() as requested by Arnd (Link[2]).

Fixes: a84d1169 ("y2038: Introduce struct __kernel_old_timeval")
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20220712094715.2918823-1-youngmin.nam@samsung.com
Link[1]: https://lore.kernel.org/all/20180310081123.thin6wphgk7tongy@gmail.com/
Link[2]: https://lore.kernel.org/all/CAK8P3a3nknJgEDESGdJH91jMj6R_xydFqWASd8r5BbesdvMBgA@mail.gmail.com/

do_clock_gettime() is used only in posix-stubs.c, so make it static. It avoids
a compiler warning too:
time/posix-stubs.c:73:5: warning: no previous prototype for ‘do_clock_gettime’ [-Wmissing-prototypes]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220719085620.30567-1-jslaby@suse.cz

Pull MM updates from Andrew Morton:
 "Most of the MM queue. A few things are still pending.

  Liam's maple tree rework didn't make it. This has resulted in a few
  other minor patch series being held over for next time.

  Multi-gen LRU still isn't merged as we were waiting for mapletree to
  stabilize. The current plan is to merge MGLRU into -mm soon and to
  later reintroduce mapletree, with a view to hopefully getting both
  into 6.1-rc1.

  Summary:

   - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
     Lin, Yang Shi, Anshuman Khandual and Mike Rapoport

   - Some kmemleak fixes from Patrick Wang and Waiman Long

   - DAMON updates from SeongJae Park

   - memcg debug/visibility work from Roman Gushchin

   - vmalloc speedup from Uladzislau Rezki

   - more folio conversion work from Matthew Wilcox

   - enhancements for coherent device memory mapping from Alex Sierra

   - addition of shared pages tracking and CoW support for fsdax, from
     Shiyang Ruan

   - hugetlb optimizations from Mike Kravetz

   - Mel Gorman has contributed some pagealloc changes to improve
     latency and realtime behaviour.

   - mprotect soft-dirty checking has been improved by Peter Xu

   - Many other singleton patches all over the place"

 [ XFS merge from hell as per Darrick Wong in

   https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]

* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
  tools/testing/selftests/vm/hmm-tests.c: fix build
  mm: Kconfig: fix typo
  mm: memory-failure: convert to pr_fmt()
  mm: use is_zone_movable_page() helper
  hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
  hugetlbfs: cleanup some comments in inode.c
  hugetlbfs: remove unneeded header file
  hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
  hugetlbfs: use helper macro SZ_1{K,M}
  mm: cleanup is_highmem()
  mm/hmm: add a test for cross device private faults
  selftests: add soft-dirty into run_vmtests.sh
  selftests: soft-dirty: add test for mprotect
  mm/mprotect: fix soft-dirty check in can_change_pte_writable()
  mm: memcontrol: fix potential oom_lock recursion deadlock
  mm/gup.c: fix formatting in check_and_migrate_movable_page()
  xfs: fail dax mount if reflink is enabled on a partition
  mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
  userfaultfd: don't fail on unrecognized features
  hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
  ...

Pull MTD updates from Richard Weinberger:
 "MTD core changes:

   - Dynamic partition support

   - Fix deadlock in sm_ftl

   - Various refcount fixes in maps, partitions and parser code

   - Integer overflow fixes in mtdchar

   - Support for Sercomm partitions

  NAND driver changes:

   - Clockrate fix for arasan

   - Add ATO25D1GA support

   - Double free fix for meson driver

   - Fix probe/remove methods in cafe NAND

   - Support unprotected spare data pages in qcom_nandc

  SPI NOR core changes:

   - move SECT_4K_PMC flag out of the core as it's a vendor specific
     flag

   - s/addr_width/addr_nbytes/g: address width means the number of IO
     lines used for the address, whereas in the code it is used as the
     number of address bytes.

   - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
     parsing time we should not change members of struct spi_nor, but
     instead fill members of struct spi_nor_flash_parameters which could
     later on be used by the callers.

   - track flash's internal address mode so that we can use 4B opcodes
     together with opcodes that don't have a 4B opcode correspondent.

  SPI NOR manufacturer drivers changes:

   - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".

   - micron-st: Skip FSR reading if SPI controller does not support it
     to allow flashes that support FSR to work even when attached to
     such SPI controllers.

   - spansion: Add s25hl-t/s25hs-t IDs and fixups"

* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
  mtd: core: check partition before dereference
  mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
  mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
  mtd: spi-nor: spansion: Add local function to discover page size
  mtd: spi-nor: core: Track flash's internal address mode
  mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
  mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
  mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
  mtd: spi-nor: s/addr_width/addr_nbytes
  mtd: spi-nor: esmt: Use correct name of f25l32qa
  mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
  MAINTAINERS: Use my kernel.org email
  mtd: rawnand: arasan: Fix clock rate in NV-DDR
  mtd: rawnand: arasan: Update NAND bus clock instead of system clock
  mtd: core: introduce of support for dynamic partitions
  dt-bindings: mtd: partitions: add additional example for qcom,smem-part
  dt-bindings: mtd: partitions: support label/name only partition
  mtd: spi-nor: move SECT_4K_PMC special handling
  mtd: dataflash: Add SPI ID table
  mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
  ...

Pull UML updates from Richard Weinberger:

 - KASAN support for x86_64

 - noreboot command line option, just like qemu's -no-reboot

 - Various fixes and cleanups

* tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: include sys/types.h for size_t
  um: Replace to_phys() and to_virt() with less generic function names
  um: Add missing apply_returns()
  um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups
  um: include linux/stddef.h for __always_inline
  UML: add support for KASAN under x86_64
  mm: Add PAGE_ALIGN_DOWN macro
  um: random: Don't initialise hwrng struct with zero
  um: remove unused mm_copy_segments
  um: remove unused variable
  um: Remove straying parenthesis
  um: x86: print RIP with symbol
  arch: um: Fix build for statically linked UML w/ constructors
  x86/um: Kconfig: Fix indentation
  um/drivers: Kconfig: Fix indentation
  um: Kconfig: Fix indentation

Pull OpenRISC updates from Stafford Horne:
 "In this cycle we add PCI support to OpenRISC used in our new QEMU virt
  platform.

  The main updates from me include:

   - Kconfig updates to support OpenRISC PCI (just config now after the
     PCI cleanups I did on Bjorn's branch)

   - A new defconfig for the qemu virt platform.

   - Also there is one MAINTAINERS update. As I was working on the PCI
     series we kept getting bounces from Richard's old email address. I
     added this here; I am not sure how these are usually handled when
     the maintainer doesn't queue it themselves"

* tag 'for-linus' of github.com:openrisc/linux:
  openrisc: io: Define iounmap argument as volatile
  MAINTAINERS: Update Richard Henderson's address
  openrisc: Add virt defconfig
  openrisc: Add pci bus support

Pull x86 SGX updates from Dave Hansen:
 "A set of x86/sgx changes focused on implementing the "SGX2" features,
  plus a minor cleanup:

   - SGX2 ISA support which makes enclave memory management much more
     dynamic. For instance, enclaves can now change enclave page
     permissions on the fly.

   - Removal of an unused structure member"

* tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  x86/sgx: Drop 'page_index' from sgx_backing
  selftests/sgx: Page removal stress test
  selftests/sgx: Test reclaiming of untouched page
  selftests/sgx: Test invalid access to removed enclave page
  selftests/sgx: Test faulty enclave behavior
  selftests/sgx: Test complete changing of page type flow
  selftests/sgx: Introduce TCS initialization enclave operation
  selftests/sgx: Introduce dynamic entry point
  selftests/sgx: Test two different SGX2 EAUG flows
  selftests/sgx: Add test for TCS page permission changes
  selftests/sgx: Add test for EPCM permission changes
  Documentation/x86: Introduce enclave runtime management section
  x86/sgx: Free up EPC pages directly to support large page ranges
  x86/sgx: Support complete page removal
  x86/sgx: Support modifying SGX page type
  x86/sgx: Tighten accessible memory range after enclave initialization
  x86/sgx: Support adding of pages to an initialized enclave
  x86/sgx: Support restricting of enclave page permissions
  x86/sgx: Support VA page allocation without reclaiming
  x86/sgx: Export sgx_encl_page_alloc()
  ...

Pull asm-generic updates from Arnd Bergmann:
 "There are three independent sets of changes:

   - Sai Prakash Ranjan adds tracing support to the asm-generic version
     of the MMIO accessors, which is intended to help understand
     problems with device drivers and has been part of Qualcomm's vendor
     kernels for many years

   - A patch from Sebastian Siewior to rework the handling of IRQ stacks
     in softirqs across architectures, which is needed for enabling
     PREEMPT_RT

   - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
     the code behind that, after the last users of this old interface
     made it in through the netdev, scsi, media and staging trees"

* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: asm-generic: fcntl: Fix typo 'the the' in comment
  arch/*/: remove CONFIG_VIRT_TO_BUS
  soc: qcom: geni: Disable MMIO tracing for GENI SE
  serial: qcom_geni_serial: Disable MMIO tracing for geni serial
  asm-generic/io: Add logging support for MMIO accessors
  KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
  lib: Add register read/write tracing support
  drm/meson: Fix overflow implicit truncation warnings
  irqchip/tegra: Fix overflow implicit truncation warnings
  coresight: etm4x: Use asm-generic IO memory barriers
  arm64: io: Use asm-generic high level MMIO accessors
  arch/*: Disable softirq stacks on PREEMPT_RT.

Pull more ARM SoC updates from Arnd Bergmann:
 "These updates came in after I had already tagged the branches, but
  they still seem appropriate for 6.0 and most of them were part of
  linux-next through other trees.

   - The reset controller tree adds one new driver for the TI TPS380x
     power management chip and a few minor changes in other drivers

   - Apple M1 now has a DT entry for the NVMe controller after the
     driver was merged, and has a new mailing list in the MAINTAINERS
     file.

   - Fixes for USB on the Socionext Uniphier platforms and the network
     controller on Intel Cyclone5"

* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
  ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
  arm64: dts: apple: t8103: Add ANS2 NVMe nodes
  reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
  reset: tps380x: Add TPS380x device driver supprt
  dt-bindings: reset: Add TPS380x documentation
  dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
  ARM: dts: add EMAC AXI settings for Cyclone5
  reset: reset-simple should depends on HAS_IOMEM
  Revert "reset: microchip-sparx5: allow building as a module"
  reset: a10sr: allow building under COMPILE_TEST
  reset: allow building of reset simple driver if expert config selected
  reset: microchip-sparx5: allow building as a module
  arm64: dts: apple: Re-parent ANS2 power domains
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

Pull parisc updates from Helge Deller:
 "One real bugfix to change the io_pgetevents_time64() syscall to use
  the compat implementation when running in compat mode, otherwise the
  signed int32 parameters min_nr and nr will be incorrectly handled as
  unsigned int64 values.

  Other than that just small cleanups:

   - hardware database housekeeping and proper /proc/iomem output

   - add proper function exit code if probe functions fail

   - drop stale variables (pa_swapper_pg_lock)

   - drop unneccessary zero-initializations

   - typo fixes in comments"

* tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  Input: gscps2 - check return value of ioremap() in gscps2_probe()
  parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
  parisc: Drop zero variable initialisations in mm/init.c
  parisc: Do not initialise statics to 0
  parisc: Check the return value of ioremap() in lba_driver_probe()
  parisc: Drop pa_swapper_pg_lock spinlock
  parisc: Fix comment typo in fault.c
  parisc: Fix device names in /proc/iomem
  parisc: Clean up names in hardware database

Pull microblaze updates from Michal Simek:

 - Trivial comment fix

 - Remove HANDLE_DOMAIN_IRQ selection

* tag 'microblaze-v5.20' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix some typos in comment
  arch: microblaze: Remove unused "select HANDLE_DOMAIN_IRQ"

Pull printk updates from Petr Mladek:

 - Allow reading kernel log in gdb even on 32 bits systems

 - More granular check of the buffer usage in printf selftest

 - Clang warning fix

* tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/test_printf.c: fix clang -Wformat warnings
  scripts/gdb: fix 'lx-dmesg' on 32 bits arch
  lib/test_printf.c: split write-beyond-buffer check in two

Pull tracing updates from Steven Rostedt:

 - Runtime verification infrastructure

   This is the biggest change here. It introduces the runtime
   verification that is necessary for running Linux on safety critical
   systems.

   It allows for deterministic automata models to be inserted into the
   kernel that will attach to tracepoints, where the information on
   these tracepoints will move the model from state to state.

   If a state is encountered that does not belong to the model, it will
   then activate a given reactor, that could just inform the user or
   even panic the kernel (for which safety critical systems will detect
   and can recover from).

 - Two monitor models are also added: Wakeup In Preemptive (WIP - not to
   be confused with "work in progress"), and Wakeup While Not Running
   (WWNR).

 - Added __vstring() helper to the TRACE_EVENT() macro to replace
   several vsnprintf() usages that were all doing it wrong.

 - eprobes now can have their event autogenerated when the event name is
   left off.

 - The rest is various cleanups and fixes.

* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
  rv: Unlock on error path in rv_unregister_reactor()
  tracing: Use alignof__(struct {type b;}) instead of offsetof()
  tracing/eprobe: Show syntax error logs in error_log file
  scripts/tracing: Fix typo 'the the' in comment
  tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
  tracing: Use free_trace_buffer() in allocate_trace_buffers()
  tracing: Use a struct alignof to determine trace event field alignment
  rv/reactor: Add the panic reactor
  rv/reactor: Add the printk reactor
  rv/monitor: Add the wwnr monitor
  rv/monitor: Add the wip monitor
  rv/monitor: Add the wip monitor skeleton created by dot2k
  Documentation/rv: Add deterministic automata instrumentation documentation
  Documentation/rv: Add deterministic automata monitor synthesis documentation
  tools/rv: Add dot2k
  Documentation/rv: Add deterministic automaton documentation
  tools/rv: Add dot2c
  Documentation/rv: Add a basic documentation
  rv/include: Add instrumentation helper functions
  rv/include: Add deterministic automata monitor definition via C macros
  ...

Pull real time analysis tool (rtla) updates from Steven Rostedt:

 - Fix a double free

 - Define syscall numbers for RISCV

 - Fix Makefile when called from -C tools

 - Use calloc() to check for memory allocation failures

* tag 'trace-rtla-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla: Define syscall numbers for riscv
  rtla: Fix double free
  rtla: Fix Makefile when called from -C tools/
  rtla/utils: Use calloc and check the potential memory allocation failure

Two bugfixes that came in to update the MAINTAINERS file
and fix an issue with USB on the uniphier platform.

* arm/fixes:
  arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
  ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

Pull xfs updates from Darrick Wong:
 "The biggest changes for this release are the log scalability
  improvements, lockless lookups for the buffer cache, and making the
  attr fork a permanent part of the incore inode in preparation for
  directory parent pointers.

  There's also a bunch of bug fixes that have accumulated since -rc5. I
  might send you a second pull request with some more bug fixes that I'm
  still working on.

  Once the merge window ends, I will hand maintainership back to Dave
  Chinner until the 6.1-rc1 release so that I can conduct the design
  review for the online fsck feature, and try to get it merged.

  Summary:

   - Improve scalability of the XFS log by removing spinlocks and global
     synchronization points.

   - Add security labels to whiteout inodes to match the other
     filesystems.

   - Clean up per-ag pointer passing to simplify call sites.

   - Reduce verifier overhead by precalculating more AG geometry.

   - Implement fast-path lockless lookups in the buffer cache to reduce
     spinlock hammering.

   - Make attr forks a permanent part of the inode structure to fix a
     UAF bug and because most files these days tend to have security
     labels and soon will have parent pointers too.

   - Clean up XFS_IFORK_Q usage and give it a better name.

   - Fix more UAF bugs in the xattr code.

   - SOB my tags.

   - Fix some typos in the timestamp range documentation.

   - Fix a few more memory leaks.

   - Code cleanups and typo fixes.

   - Fix an unlocked inode fork pointer access in getbmap"

* tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (61 commits)
  xfs: delete extra space and tab in blank line
  xfs: fix NULL pointer dereference in xfs_getbmap()
  xfs: Fix typo 'the the' in comment
  xfs: Fix comment typo
  xfs: don't leak memory when attr fork loading fails
  xfs: fix for variable set but not used warning
  xfs: xfs_buf cache destroy isn't RCU safe
  xfs: delete unnecessary NULL checks
  xfs: fix comment for start time value of inode with bigtime enabled
  xfs: fix use-after-free in xattr node block inactivation
  xfs: lockless buffer lookup
  xfs: remove a superflous hash lookup when inserting new buffers
  xfs: reduce the number of atomic when locking a buffer after lookup
  xfs: merge xfs_buf_find() and xfs_buf_get_map()
  xfs: break up xfs_buf_find() into individual pieces
  xfs: add in-memory iunlink log item
  xfs: add log item precommit operation
  xfs: combine iunlink inode update functions
  xfs: clean up xfs_iunlink_update_inode()
  xfs: double link the unlinked inode list
  ...

Pull ext4 updates from Ted Ts'o:
 "Add new ioctls to set and get the file system UUID in the ext4
  superblock and improved the performance of the online resizing of file
  systems with bigalloc enabled.

  Fixed a lot of bugs, in particular for the inline data feature,
  potential races when creating and deleting inodes with shared extended
  attribute blocks, and the handling of directory blocks which are
  corrupted"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits)
  ext4: add ioctls to get/set the ext4 superblock uuid
  ext4: avoid resizing to a partial cluster size
  ext4: reduce computation of overhead during resize
  jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
  ext4: block range must be validated before use in ext4_mb_clear_bb()
  mbcache: automatically delete entries from cache on freeing
  mbcache: Remove mb_cache_entry_delete()
  ext2: avoid deleting xattr block that is being reused
  ext2: unindent codeblock in ext2_xattr_set()
  ext2: factor our freeing of xattr block reference
  ext4: fix race when reusing xattr blocks
  ext4: unindent codeblock in ext4_xattr_block_set()
  ext4: remove EA inode entry from mbcache on inode eviction
  mbcache: add functions to delete entry if unused
  mbcache: don't reclaim used entries
  ext4: make sure ext4_append() always allocates new block
  ext4: check if directory block is within i_size
  ext4: reflect mb_optimize_scan value in options file
  ext4: avoid remove directory when directory is corrupted
  ext4: aligned '*' in comments
  ...

Pull block driver updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - add support for In-Band authentication (Hannes Reinecke)
      - handle the persistent internal error AER (Michael Kelley)
      - use in-capsule data for TCP I/O queue connect (Caleb Sander)
      - remove timeout for getting RDMA-CM established event (Israel
        Rukshin)
      - misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
        Guixin Liu, Xiang wangx)
      - use command_id instead of req->tag in trace_nvme_complete_rq()
        (Bean Huo)
      - various fixes for the new authentication code (Lukas Bulwahn,
        Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
        Reinecke)
      - small cleanups (Liu Song, Christoph Hellwig)
      - restore compat_ioctl support (Nick Bowler)
      - make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
      - enable generic interface (/dev/ngXnY) for unknown command sets
        (Joel Granados, Christoph Hellwig)
      - don't always build constants.o (Christoph Hellwig)
      - print the command name of aborted commands (Christoph Hellwig)

 - MD pull requests via Song:
      - Improve raid5 lock contention, by Logan Gunthorpe.
      - Misc fixes to raid5, by Logan Gunthorpe.
      - Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
      - Fix potential deadlock with raid5_quiesce and
        raid5_get_active_stripe, by Logan Gunthorpe.
      - Refactoring md_alloc(), by Christoph"
      - Fix md disk_name lifetime problems, by Christoph Hellwig
      - Convert prepare_to_wait() to wait_woken() api, by Logan
        Gunthorpe;
      - Fix sectors_to_do bitmap issue, by Logan Gunthorpe.

 - Work on unifying the null_blk module parameters and configfs API
   (Vincent)

 - drbd bitmap IO error fix (Lars)

 - Set of rnbd fixes (Guoqing, Md Haris)

 - Remove experimental marker on bcache async device registration (Coly)

 - Series from cleaning up the bio splitting (Christoph)

 - Removal of the sx8 block driver. This hardware never really
   widespread, and it didn't receive a lot of attention after the
   initial merge of it back in 2005 (Christoph)

 - A few fixes for s390 dasd (Eric, Jiang)

 - Followup set of fixes for ublk (Ming)

 - Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)

 - Fixes for the dio dma alignment (Keith)

 - Misc fixes and cleanups (Ming, Yu, Dan, Christophe

* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
  s390/dasd: Establish DMA alignment
  s390/dasd: drop unexpected word 'for' in comments
  ublk_drv: add support for UBLK_IO_NEED_GET_DATA
  ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
  ublk_drv: cleanup ublksrv_ctrl_dev_info
  ublk_drv: add SET_PARAMS/GET_PARAMS control command
  ublk_drv: fix ublk device leak in case that add_disk fails
  ublk_drv: cancel device even though disk isn't up
  block: fix leaking page ref on truncated direct io
  block: ensure bio_iov_add_page can't fail
  block: ensure iov_iter advances for added pages
  drivers:md:fix a potential use-after-free bug
  md/raid5: Ensure batch_last is released before sleeping for quiesce
  md/raid5: Move stripe_request_ctx up
  md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
  md/raid5: Make is_inactive_blocked() helper
  md/raid5: Refactor raid5_get_active_stripe()
  block: pass struct queue_limits to the bio splitting helpers
  block: move bio_allowed_max_sectors to blk-merge.c
  block: move the call to get_max_io_size out of blk_bio_segment_split
  ...

Pull rdma updates from Jason Gunthorpe:
 "This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
  environment. Otherwise the changes are dominated by rxe fixes.

  There is another RDMA driver on the list that might get merged next
  cycle, 'MANA' for the Azure cloud environment.

  Summary:

   - Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5

   - General spelling/grammer fixes

   - rdma cm can follow changes in neighbours for control packets

   - Significant amounts of rxe fixes and spec compliance changes

   - Use the modern NAPI API

   - Use the bitmap API instead of open coding

   - Performance improvements for rtrs

   - Add the ERDMA driver for Alibaba cloud

   - Fix a use after free bug in SRP"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
  RDMA/rxe: Fix error unwind in rxe_create_qp()
  RDMA/mlx5: Add missing check for return value in get namespace flow
  RDMA/rxe: Split qp state for requester and completer
  RDMA/rxe: Generate error completion for error requester QP state
  RDMA/rxe: Update wqe_index for each wqe error completion
  RDMA/srpt: Fix a use-after-free
  RDMA/srpt: Introduce a reference count in struct srpt_device
  RDMA/srpt: Duplicate port name members
  IB/qib: Fix repeated "in" within comments
  RDMA/erdma: Add driver to kernel build environment
  RDMA/erdma: Add the ABI definitions
  RDMA/erdma: Add the erdma module
  RDMA/erdma: Add connection management (CM) support
  RDMA/erdma: Add verbs implementation
  RDMA/erdma: Add verbs header file
  RDMA/erdma: Add event queue implementation
  RDMA/erdma: Add cmdq implementation
  RDMA/erdma: Add main include file
  RDMA/erdma: Add the hardware related definitions
  ...

Unlock the "rv_interface_lock" mutex before returning.

Link: https://lkml.kernel.org/r/YuvYzNfGMgV+PIhd@kili

Fixes: 04acadcb ("rv: Add runtime reactors interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
  mpi3mr).

  The main driver change that might cause issues on down the road is the
  conversion of some of our oldest surviving drivers to the DMA API
  (should only affect m68k).

  The only major core change is the rework of async resume; the rest are
  either completely trivial or for updating deprecated APIs"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
  scsi: target: Remove XDWRITEREAD emulated support
  scsi: megaraid: Remove the static variable initialisation
  scsi: ch: Do not initialise statics to 0
  scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
  scsi: target: iscsi: Do not require target authentication
  scsi: target: iscsi: Allow AuthMethod=None
  scsi: target: iscsi: Support base64 in CHAP
  scsi: target: iscsi: Add support for extended CDB AHS
  scsi: ufs: dt-bindings: Add SC8280XP binding
  scsi: target: iscsi: Fix clang -Wformat warnings
  scsi: ufs: core: Read device property for ref clock
  scsi: libsas: Resume SAS host for phy reset or enable via sysfs
  scsi: hisi_sas: Modify v3 HW SATA completion error processing
  scsi: hisi_sas: Relocate DMA unmap of SMP task
  scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
  scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
  scsi: mpi3mr: Delete a stray tab
  scsi: mpi3mr: Unlock on error path
  scsi: mpi3mr: Reduce VD queue depth on detecting throttling
  scsi: mpi3mr: Resource Based Metering
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for the asynchronous SDIO wakeup interrupts
   - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
   - Add support to store error stats from host drivers
   - Extend debugfs to show error stats from host drivers
   - Add single I/O read support in the recovery path for 4k sector cards

  MMC host:
   - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
   - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
   - mmc_spi: Convert corresponding DT bindings to the dtschema
   - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
   - mtk-sd: Add support for SDIO wake irqs
   - mtk-sd: Add support for the Mediatek MT8188 variant
   - renesas_sdhi: Drop redundant manual tap correction for newer SoCs
   - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
   - sdhci/cqhci: Add support to capture stats from host errors
   - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
   - sdhci-msm: Add support for the MSM8998 and SM8450 variant
   - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
   - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
   - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
   - sdhci-pci-gli: Improve I/O read/write performance for GL9763E
   - sdhci-s3c: Convert corresponding DT bindings to the dtschema
   - tmio: Avoid glitches when resetting

  MEMSTICK core:
   - A couple of minor fixes and cleanups"

* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
  mmc: mediatek: add support for SDIO eint wakup IRQ
  mmc: core: Add support for SDIO wakeup interrupt
  dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
  dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
  mmc: renesas_sdhi: newer SoCs don't need manual tap correction
  mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
  mmc: cavium-octeon: Add of_node_put() when breaking out of loop
  mmc: core: quirks: Add of_node_put() when breaking out of loop
  mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
  dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
  mmc: sdhci-msm: drop redundant of_device_id entries
  dt-bindings: mmc: sdhci-msm: add MSM8998
  mmc: block: Add single read for 4k sector cards
  mmc: mxcmmc: Use mmc_card_sdio macro
  mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
  dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
  dt-bindings: mmc: sdhci-msm: fix reg-names entries
  dt-bindings: mmc: Add compatible for MediaTek MT8188
  dt-bindings: mmc: sdhci-msm: document resets
  mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate duplicated 'next function' scanning and extend to allow
     'isolated functions' on s390, similar to existing hypervisors
     (Niklas Schnelle)

  Resource management:
   - Implement pci_iobar_pfn() for sparc, which allows us to remove the
     sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().

     This removes the ability to map the entire PCI I/O space using
     /proc/bus/pci, but we believe that's already been broken since
     v2.6.28 (Arnd Bergmann)

   - Move common PCI definitions to asm-generic/pci.h and rework others
     to be be more specific and more encapsulated in arches that need
     them (Stafford Horne)

  Power management:

   - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
     CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)

  Virtualization:

   - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
     the functions but don't advertise an ACS capability (Pavan Chebbi)

  Error handling:

   - Clear PCI Status register during enumeration in case firmware left
     errors logged (Kai-Heng Feng)

   - When we have native control of AER, enable error reporting for all
     devices that support AER. Previously only a few drivers enabled
     this (Stefan Roese)

   - Keep AER error reporting enabled for switches. Previously we
     enabled this during enumeration but immediately disabled it (Stefan
     Roese)

   - Iterate over error counters instead of error strings to avoid
     printing junk in AER sysfs counters (Mohamed Khalfella)

  ASPM:

   - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
     via sysfs, are not lost across power state changes (Kai-Heng Feng)

  Endpoint framework:

   - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)

  Endpoint embedded DMA controller driver:

   - Simplify and clean up support for the DesignWare embedded DMA
     (eDMA) controller (Frank Li, Serge Semin)

  Broadcom STB PCIe controller driver:

   - Avoid config space accesses when link is down because we can't
     recover from the CPU aborts these cause (Jim Quinlan)

   - Look for power regulators described under Root Ports in DT and
     enable them before scanning the secondary bus (Jim Quinlan)

   - Disable/enable regulators in suspend/resume (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:

   - Simplify and clean up clock and PHY management (Richard Zhu)

   - Disable/enable regulators in suspend/resume (Richard Zhu)

   - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)

   - Allow speeds faster than Gen2 (Richard Zhu)

   - Make link being down a non-fatal error so controller probe doesn't
     fail if there are no Endpoints connected (Richard Zhu)

  Loongson PCIe controller driver:

   - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)

   - Avoid config reads to non-existent LS2K/LS7A devices because a
     hardware defect causes machine hangs (Huacai Chen)

   - Work around LS7A integrated devices that report incorrect Interrupt
     Pin values (Jianmin Lv)

  Marvell Aardvark PCIe controller driver:

   - Add support for AER and Slot capability on emulated bridge (Pali
     Rohár)

  MediaTek PCIe controller driver:

   - Add Airoha EN7532 to DT binding (John Crispin)

   - Allow building of driver for ARCH_AIROHA (Felix Fietkau)

  MediaTek PCIe Gen3 controller driver:

   - Print decoded LTSSM state when the link doesn't come up (Jianjun
     Wang)

  NVIDIA Tegra194 PCIe controller driver:

   - Convert DT binding to json-schema (Vidya Sagar)

   - Add DT bindings and driver support for Tegra234 Root Port and
     Endpoint mode (Vidya Sagar)

   - Fix some Root Port interrupt handling issues (Vidya Sagar)

   - Set default Max Payload Size to 256 bytes (Vidya Sagar)

   - Fix Data Link Feature capability programming (Vidya Sagar)

   - Extend Endpoint mode support to devices beyond Controller-5 (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Rework clock, reset, PHY power-on ordering to avoid hangs and
     improve consistency (Robert Marko, Christian Marangi)

   - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)

   - Add IPQ60xx support (Selvam Sathappan Periakaruppan)

   - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)

   - Add support for more than 32 MSI interrupts (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:

   - Convert DT binding to json-schema (Herve Codina)

   - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
     (Herve Codina)

  Samsung Exynos PCIe controller driver:

   - Fix phy-exynos-pcie driver so it follows the 'phy_init() before
     phy_power_on()' PHY programming model (Marek Szyprowski)

  Synopsys DesignWare PCIe controller driver:

   - Simplify and clean up the DWC core extensively (Serge Semin)

   - Fix an issue with programming the ATU for regions that cross a 4GB
     boundary (Serge Semin)

   - Enable the CDM check if 'snps,enable-cdm-check' exists; previously
     we skipped it if 'num-lanes' was absent (Serge Semin)

   - Allocate a 32-bit DMA-able page to be MSI target instead of using a
     driver data structure that may not be addressable with 32-bit
     address (Will McVicker)

   - Add DWC core support for more than 32 MSI interrupts (Dmitry
     Baryshkov)

  Xilinx Versal CPM PCIe controller driver:

   - Add DT binding and driver support for Versal CPM5 Gen5 Root Port
     (Bharat Kumar Gogada)"

* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
  PCI: imx6: Support more than Gen2 speed link mode
  PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
  PCI: imx6: Reformat suspend callback to keep symmetric with resume
  PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
  PCI: imx6: Disable clocks in reverse order of enable
  PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
  PCI: imx6: Reduce resume time by only starting link if it was up before suspend
  PCI: imx6: Mark the link down as non-fatal error
  PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
  PCI: imx6: Turn off regulator when system is in suspend mode
  PCI: imx6: Call host init function directly in resume
  PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
  PCI: imx6: Propagate .host_init() errors to caller
  PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
  PCI: imx6: Factor out ref clock disable to match enable
  PCI: imx6: Move imx6_pcie_clk_disable() earlier
  PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
  PCI: imx6: Move PHY management functions together
  PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
  PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
  ...

Pull dmaengine updates from Vinod Koul:
 "New support / Core:

   - Remove DMA_MEMCPY_SG for lack of users

   - Tegra 234 dmaengine support

   - Mediatek MT8365 dma support

   - Apple ADMAC driver

  Updates:

   - Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma

   - rz-dmac updates and device_synchronize support

   - Bunch of typo in comments fixes in drivers

   - multithread support in sf-pdma driver"

* tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits)
  dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment
  dmaengine: axi-dmac: check cache coherency register
  dmaengine: sh: rz-dmac: Add device_synchronize callback
  dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
  dmaengine: tegra: Add terminate() for Tegra234
  dt-bindings: dmaengine: Add compatible for Tegra234
  dmaengine: xilinx: use strscpy to replace strlcpy
  dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script
  dmaengine: idxd: Correct IAX operation code names
  dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
  dmaengine: dw-axi-dmac: ignore interrupt if no descriptor
  dmaengine: dw-axi-dmac: do not print NULL LLI during error
  dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions
  dmaengine: imx-sdma: Add missing struct documentation
  dmaengine: sf-pdma: Add multithread support for a DMA channel
  dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
  dmaengine: dmatest: use strscpy to replace strlcpy
  dmaengine: ste_dma40: fix typo in comment
  dmaengine: jz4780: fix typo in comment
  dmaengine: s3c24xx: fix typo in comment
  ...

Pull clk updates from Stephen Boyd:
 "The clk core gains a new set of APIs that allow drivers to both
  acquire clks and prepare and enable them at the same time. This also
  comes with devm support so that drivers can make a single call to get
  and prepare and enable the clk and have that all undone when their
  driver is removed.

  Many folks have requested this feature over the years, but we've had
  disagreements about how to implement it and if it was worthwhile to
  encourage drivers to use such an API.

  Now it's here, so let's see how it goes.

  I hope that by introducing this API we can identify drivers that would
  benefit from further consolidation of clk API usage, possibly by
  moving such logic to the bus layer and out of drivers altogether.

  Outside of that major API update, we have the usual collection of
  driver updates. A few new SoCs are supported, mostly Qualcomm and
  Renesas this time around. Then we have the long tail of non-critical
  fixes and minor feature additions to various clk drivers.

  And finally more clk provider migration to struct clk_parent_data,
  reducing boot times in the process.

  Summary:

  Core:

   - devm helpers for clk_get() + clk_prepare() and clk_enable()

  New Drivers:

   - Support for the camera clock controller in Qualcomm SM8450 and the
     display and gpu clock controllers in Qualcomm SM8350

   - Add support for the Renesas RZ/Five SoC

  Updates:

   - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
     IPQ8074

   - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
     MSM8916 GCC driver

   - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
     PCIe GDSCs

   - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
     implementation

   - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
     GCC are migrated to use clk_parent_data

   - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
     and SM8250

   - Qualcomm MSM8916 gains more possible frequencies for its GP clocks.

   - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
     the design in IPQ8074 to allow the GCC driver to probe earlier.

   - The regulator based mmcx supply for Qualcomm dispcc and videocc is
     dropped, as the only upstream target that adapted this interface
     was transitioned several kernel versions ago

   - Qualcomm GDSCs found to be enabled at boot will now reflect in the
     enable count of the supply, as was done with the regulator supplies
     previously

   - Correct adc1, nic_media and edma1's parents for NXP i.MX93

   - rdiv, mfd values, the return rate in recalc_rate and add more
     frequencies in the table for fracn-gppll on i.MX

   - Remove Allwinner workaround logic/compatible in fixed factor code

   - MediaTek clk driver cleanups

   - Add reset support to more MediaTek clk drivers

   - deduplicate Allwinner ccu_clks arrays

   - Allwinner H6 GPU DFS support

   - Adjust Allwinner Kconfig to limit choice

   - Fix initconst confusion on Renesas R-Car Gen4

   - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L

   - Add PFC and WDT clocks and resets on Renesas RZ/V2M

   - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
     Renesas R-Car S4-8"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
  clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
  clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
  clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
  clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
  clk: qcom: clk-rpm: convert to parent_data API
  dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
  clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
  clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
  clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
  clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
  clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
  clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
  clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
  clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
  clk: qcom: fix build error initializer element is not constant
  clk: sprd: Add dt-bindings include file for UMS512
  dt-bindings: clk: sprd: Add bindings for ums512 clock controller
  clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
  dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
  clk: qcom: add support for SM8350 DISPCC
  ...

Pull gpio updates from Bartosz Golaszewski:
 "Here are the updates for this merge window from the GPIO subsystem.

  We have more lines removed than added thanks to dropping of a driver
  for a platform that's no longer supported. Otherwise the changes are
  pretty straightforward: support for some new models, various
  improvements to existing drivers, some tweaks to the core library code
  and DT bindings updates.

  Summary:

   - remove gpio-vr41xx driver as the only platform using it got dropped
     too

   - add support for suspend/resume to gpio-davinci

   - improvements to the GPIO character device code

   - add support for disabling bias for in-kernel users (up until now
     only user-space could set it)

   - drop unused devm_gpio_free()

   - fix a refcount issue in gpiolib OF

   - use device match helpers where applicable

   - add support for a new model to gpio-rockchip

   - non-functional improvements in gpio-adp5588

   - improve and simplify teardown in gpio-twl4030 and gpio-ucb1400

   - modernize the gpio-74xx-mmio and gpio-adnp drivers

   - coding style improvements in gpio-xilinx, gpio-104-idi-48

   - support new model (pca9571) in gpio-pca9570

   - convert the DT bindings to YAML for gpio-mvebu and update the
     document

   - don't return error codes from remove() in gpio-brcmstb

   - add a library for the intel 8255 PPI interface and use it in
     drivers

   - reduce using magic numbers and improve code readability in several
     drivers

   - convert DT bindings to YAML for gpio-tpic2810

   - add new models to DT bindings for gpio-frl-imx

   - Kconfig improvements

   - other minor tweaks and improvements"

* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
  dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
  gpio: 74xx-mmio: Use bits instead of plain numbers for flags
  gpio: xilinx: add missing blank line after declarations
  MAINTAINERS: Update Intel 8255 GPIO driver file list
  gpio: gpio-mm: Implement and utilize register structures
  gpio: 104-idi-48: Implement and utilize register structures
  gpio: 104-dio-48e: Implement and utilize register structures
  gpio: i8255: Introduce the Intel 8255 interface library module
  gpio: 104-idio-16: Implement and utilize register structures
  gpio: ws16c48: Implement and utilize register structures
  gpio: remove VR41XX related gpio driver
  dt-bindings: gpio: add pull-disable flag
  gpiolib: acpi: support bias pull disable
  gpiolib: of: support bias pull disable
  gpiolib: add support for bias pull disable
  gpio: 74xx-mmio: use bits.h macros for all masks
  gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
  gpio: 74xx-mmio: Make use of device properties
  gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
  gpiolib: cdev: consolidate edge detector configuration flags
  ...

Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - Microsoft Surface:
     - SSAM hot unplug support
     - Surface Pro 8 keyboard cover support
     - Tablet mode switch support for Surface Pro 8 and Surface Laptop
       Studio

 - thinkpad_acpi:
     - AMD Automatice Mode Transitions (AMT) support

 - Mellanox:
     - Vulcan chassis COMe NVSwitch management support
     - XH3000 support

 - New generic/shared Intel P2SB (Primary to Sideband) support

 - Lots of small cleanups

 - Various small bugfixes

 - Various new hardware ids / quirks additions

* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
  platform/x86/intel/vsec: Fix wrong type for local status variables
  platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
  platform/x86: pmc_atom: Fix comment typo
  platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
  platform/olpc: Fix uninitialized data in debugfs write
  platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
  platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
  platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
  tools/power/x86/intel-speed-select: Remove unneeded semicolon
  tools/power/x86/intel-speed-select: Fix off by one check
  platform/surface: tabletsw: Fix __le32 integer access
  Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
  Documentation/ABI: mlxreg-io: Fix contact info
  platform/mellanox: mlxreg-io: Add locking for io operations
  platform/x86: mlx-platform: Add COME board revision register
  platform/x86: mlx-platform: Add support for new system XH3000
  platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
  platform/x86: mlx-platform: Add support for systems equipped with two ASICs
  platform/x86: mlx-platform: Add cosmetic changes for alignment
  platform/x86: mlx-platform: Make activation of some drivers conditional
  ...

Merge tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "cros_ec_proto:
   - Leverage Kunit and add Kunit test cases
   - Clean-ups
   - Fix typo

  cros_ec_commands:
   - Fix typo
   - Fix compile errors

  cros_kbd_led_backlight:
   - Support OF match
   - Support EC PWM backend

  cros_ec:
   - Always expose the last resume result to fix sleep hang detection on
     ARM-based chromebooks

  wilco_ec:
   - Fix typo

  cros_ec_typec:
   - Clean-ups
   - Use Type-C framework utilities to manage altmode structs"

* tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (59 commits)
  platform/chrome: cros_kunit_util: add default value for `msg->result`
  platform/chrome: merge Kunit utils and test cases
  platform/chrome: cros_kbd_led_backlight: fix build warning
  platform/chrome: cros_ec_proto: add Kunit test for cros_ec_cmd()
  platform/chrome: cros_ec_proto: add Kunit tests for get_sensor_count
  platform/chrome: cros_ec_proto: add Kunit tests for check_features
  platform/chrome: cros_ec_proto: add Kunit tests for get_host_event
  platform/chrome: cros_ec_proto: add Kunit tests for get_next_event
  platform/chrome: cros_ec_proto: add Kunit test for cros_ec_map_error()
  platform/chrome: cros_ec_proto: add Kunit tests for cmd_xfer_status
  platform/chrome: cros_ec_proto: return -EPROTO if empty payload
  platform/chrome: cros_ec_proto: add Kunit test for empty payload
  platform/chrome: cros_ec_proto: return -EAGAIN when retries timed out
  platform/chrome: cros_ec_proto: change Kunit expectation when timed out
  platform/chrome: cros_ec_proto: separate cros_ec_wait_until_complete()
  platform/chrome: cros_ec_proto: separate cros_ec_xfer_command()
  platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_send_command()
  platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: add "cros_ec_" prefix to send_command()
  platform/chrome: cros_ec_typec: Register port altmodes
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add spi-peripheral-props.yaml references to various SPI device
     bindings

   - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
     skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
     CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
     arm-firmware-suite bindings to DT schema format

   - New bindings for Arm virtual platforms display, Qualcomm IMEM
     memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
     RTC, and arm,cortex-a78ae

   - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
     quanta, and densitron

   - Add missing MSI and IOMMU properties to host-generic-pci

   - Remove bindings for removed EFM32 platform

   - Remove old chosen.txt binding (replaced by schema)

   - Treewide add missing type information for properties

   - Treewide fixing of typos and its vs. it's in bindings. Its all good
     now.

   - Drop unnecessary quoting in power related schemas

   - Several LED binding updates which didn't get picked up

   - Move various bindings to proper directories

  DT core code:

   - Convert unittest GPIO related tests to use fwnode

   - Check ima-kexec-buffer against memory bounds

   - Print reserved-memory allocation/reservation failures as errors

   - Cleanup early_init_dt_reserve_memory_arch()

   - Simplify of_overlay_fdt_apply() tail"

* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
  dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
  dt-bindings: power: supply: drop quotes when not needed
  dt-bindings: power: reset: drop quotes when not needed
  dt-bindings: power: drop quotes when not needed
  dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
  of/fdt: declared return type does not match actual return type
  devicetree/bindings: correct possessive "its" typos
  dt-bindings: net: convert emac_rockchip.txt to YAML
  dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
  dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
  dt-bindings: display: use spi-peripheral-props.yaml
  dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
  dt-bindings: power: reset: qcom,pon: use absolute path to other schema
  dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
  dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
  dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
  of/fdt: Clean up early_init_dt_reserve_memory_arch()
  dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
  dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
  dt-bindings: rtc: ds1307: Convert to json-schema
  ...

Pull HID updates from Jiri Kosina:

 - support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)

 - XP-PEN Deco L support (José Expósito)

 - support for Elan eKTH6915 touchscreens (Douglas Anderson)

 - other small assorted fixes and device ID additions

* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
  HID: amd_sfh: Handle condition of "no sensors"
  HID: amd_sfh: Fix implicit declaration error on i386
  HID: apple: Add "GANSS" to the non-Apple list
  HID: alps: Declare U1_UNICORN_LEGACY support
  HID: wacom: Force pen out of prox if no events have been received in a while
  HID: nintendo: Add missing array termination
  HID: lg-g15: Fix comment typo
  HID: amd_sfh: Implement SFH1.1 functionality
  HID: amd_sfh: Move interrupt handling to common interface
  HID: amd_sfh: Move amd_sfh_work to common interface
  HID: amd_sfh: Move global functions to static
  HID: amd_sfh: Add remove operation in amd_mp2_ops
  HID: amd_sfh: Add PM operations in amd_mp2_ops
  HID: amd_sfh: Add descriptor operations in amd_mp2_ops
  HID: amd_sfh: Move request_list variable to client data
  HID: amd_sfh: Move request_list struct to header file
  HID: amd_sfh: Move common macros and structures
  HID: amd_sfh: Add NULL check for hid device
  HID: core: remove unneeded assignment in hid_process_report()
  ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
  ...

Pull xtensa updates from Max Filippov:

 - support KCOV

 - enable ARCH_HAS_GCOV_PROFILE_ALL

 - minor ISS network driver cleanups

* tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL
  xtensa: enable KCOV support
  xtensa: iss: fix handling error cases in iss_net_configure()
  xtensa: iss/network: provide release() callback
  xtensa: iss/network: drop 'devices' list

Pull ARM updates from Russell King:
 "Not much this time around, the 5.20-rc1 development updates for arm
  are:

   - add KASAN support for vmalloc space on arm

   - some sparse fixes from Ben Dooks

   - rework amba device handling (so device addition isn't deferred)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9220/1: amba: Remove deferred device addition
  ARM: 9219/1: fix undeclared soft_restart
  ARM: 9218/1: dma-mapping: fix pointer/integer warning
  ARM: 9217/1: add definition of arch_irq_work_raise()
  ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
  ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC

Pull csky updates from Guo Ren:

 - Add jump-label implementation

 - Add qspinlock support

 - Enable ARCH_INLINE_READ*/WRITE*/SPIN*

 - Some fixups and a coding convention

* tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux:
  csky: abiv1: Fixup compile error
  csky: cmpxchg: Coding convention for BUILD_BUG()
  csky: Enable ARCH_INLINE_READ*/WRITE*/SPIN*
  csky: Add qspinlock support
  csky: Add jump-label implementation
  csky: Move HEAD_TEXT_SECTION out of __init_begin-end
  csky: Correct position of _stext
  csky: Use the bitmap API to allocate bitmaps
  csky/kprobe: reclaim insn_slot on kprobe unregistration

Pull AVR32 updates from Hans-Christian Noren Egtvedt:
 "Mostly changes to documentation and comments"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  video:backlight: remove reference to AVR32 architecture in ltv350qv
  video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb
  usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig
  sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver
  net: remove cdns,at32ap7000-macb device tree entry
  misc: update maintainer email address and description for atmel-ssc
  mfd: remove reference to AVR32 architecture in atmel-smc.c
  dma:dw: remove reference to AVR32 architecture in core.c

linux-next commit bf8d0853 ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.

Make this change for both ECKD and DIAG disciplines, as they both
would fall into this category. Leave FBA alone, since it is always
comprised of 512-byte blocks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220804213926.3361574-3-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

there is an unexpected word 'for' in the comments that need to be dropped

file - drivers/s390/block/dasd.c
line - 1728

	/* check for for attention message */

changed to:

	/* check for attention message */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220623102114.33249-1-jiangjian@cdjrlc.comSigned-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220804213926.3361574-2-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull xen updates from Juergen Gross:

 - a series fine tuning virtio support for Xen guests, including removal
   the now again unused "platform_has()" feature.

 - a fix for host admin triggered reboot of Xen guests

 - a simple spelling fix

* tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: don't require virtio with grants for non-PV guests
  kernel: remove platform_has() infrastructure
  virtio: replace restricted mem access flag with callback
  xen: Fix spelling mistake
  xen/manage: Use orderly_reboot() to reboot

Pull kvm updates from Paolo Bonzini:
 "Quite a large pull request due to a selftest API overhaul and some
  patches that had come in too late for 5.19.

  ARM:

   - Unwinder implementations for both nVHE modes (classic and
     protected), complete with an overflow stack

   - Rework of the sysreg access from userspace, with a complete rewrite
     of the vgic-v3 view to allign with the rest of the infrastructure

   - Disagregation of the vcpu flags in separate sets to better track
     their use model.

   - A fix for the GICv2-on-v3 selftest

   - A small set of cosmetic fixes

  RISC-V:

   - Track ISA extensions used by Guest using bitmap

   - Added system instruction emulation framework

   - Added CSR emulation framework

   - Added gfp_custom flag in struct kvm_mmu_memory_cache

   - Added G-stage ioremap() and iounmap() functions

   - Added support for Svpbmt inside Guest

  s390:

   - add an interface to provide a hypervisor dump for secure guests

   - improve selftests to use TAP interface

   - enable interpretive execution of zPCI instructions (for PCI
     passthrough)

   - First part of deferred teardown

   - CPU Topology

   - PV attestation

   - Minor fixes

  x86:

   - Permit guests to ignore single-bit ECC errors

   - Intel IPI virtualization

   - Allow getting/setting pending triple fault with
     KVM_GET/SET_VCPU_EVENTS

   - PEBS virtualization

   - Simplify PMU emulation by just using PERF_TYPE_RAW events

   - More accurate event reinjection on SVM (avoid retrying
     instructions)

   - Allow getting/setting the state of the speaker port data bit

   - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
     are inconsistent

   - "Notify" VM exit (detect microarchitectural hangs) for Intel

   - Use try_cmpxchg64 instead of cmpxchg64

   - Ignore benign host accesses to PMU MSRs when PMU is disabled

   - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior

   - Allow NX huge page mitigation to be disabled on a per-vm basis

   - Port eager page splitting to shadow MMU as well

   - Enable CMCI capability by default and handle injected UCNA errors

   - Expose pid of vcpu threads in debugfs

   - x2AVIC support for AMD

   - cleanup PIO emulation

   - Fixes for LLDT/LTR emulation

   - Don't require refcounted "struct page" to create huge SPTEs

   - Miscellaneous cleanups:
      - MCE MSR emulation
      - Use separate namespaces for guest PTEs and shadow PTEs bitmasks
      - PIO emulation
      - Reorganize rmap API, mostly around rmap destruction
      - Do not workaround very old KVM bugs for L0 that runs with nesting enabled
      - new selftests API for CPUID

  Generic:

   - Fix races in gfn->pfn cache refresh; do not pin pages tracked by
     the cache

   - new selftests API using struct kvm_vcpu instead of a (vm, id)
     tuple"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
  selftests: kvm: set rax before vmcall
  selftests: KVM: Add exponent check for boolean stats
  selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
  selftests: KVM: Check stat name before other fields
  KVM: x86/mmu: remove unused variable
  RISC-V: KVM: Add support for Svpbmt inside Guest/VM
  RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
  RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
  KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
  RISC-V: KVM: Add extensible CSR emulation framework
  RISC-V: KVM: Add extensible system instruction emulation framework
  RISC-V: KVM: Factor-out instruction emulation into separate sources
  RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
  RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
  RISC-V: KVM: Fix variable spelling mistake
  RISC-V: KVM: Improve ISA extension by using a bitmap
  KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
  KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
  KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
  KVM: x86: Do not block APIC write for non ICR registers
  ...

The builds for alpha and mips allmodconfig fails with the error:

  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:23: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration]
  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:21: error: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:545:33: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]

Add the header file for vmalloc and vfree.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>