This symbol is not used outside of fprobe_example.c, so marks it static.

Fixes the following warning:

sparse warnings: (new ones prefixed by >>)
>> samples/fprobe/fprobe_example.c:23:15: sparse: sparse: symbol 'sample_probe'
was not declared. Should it be static?

Link: https://lkml.kernel.org/r/20220606075659.674556-1-sunliming@kylinos.cnReported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Remove extra semicolon.

Link: https://lkml.kernel.org/r/20220629030013.10362-1-kunyu@nfschina.com

Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.

The start of functions when -pg is used to compile the kernel is:

	push    {lr}
	bl      8010e7c0 <__gnu_mcount_nc>

When function tracing is tuned off, it becomes:

	push    {lr}
	add   sp, sp, #4

Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.

Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.

Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.homeReported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().

This appears to have been caused by commit ff895103 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.

The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.

Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa2 ("tracing: Show real
address for trace event arguments"), so we'll move that too.

Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid

Fixes: ff895103 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa2 ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This reverts commit 46bbe5c6.

As commit 46bbe5c6 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
  > In parse_var_defs() if there is a problem allocating
  > var_defs.expr, the earlier var_defs.name is freed.
  > This free is duplicated by free_var_defs() which frees
  > the rest of the list.

However, if there is a problem allocating N-th var_defs.expr:
  + in parse_var_defs(), the freed 'earlier var_defs.name' is
    actually the N-th var_defs.name;
  + then in free_var_defs(), the names from 0th to (N-1)-th are freed;

                        IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
                                                                 \
                                                                  |
          0th           1th                 (N-1)-th      N-th    V
          +-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
          +-------------+-------------+-----+-------------+-----------

These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.

If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
  $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger

Then kmemleak reports:
  unreferenced object 0xffff8fb100ef3518 (size 8):
    comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
    hex dump (first 8 bytes):
      76 31 00 00 b1 8f ff ff                          v1......
    backtrace:
      [<0000000038fe4895>] kstrdup+0x2d/0x60
      [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
      [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
      [<0000000066737a4c>] event_trigger_write+0x75/0xd0
      [<000000007341e40c>] vfs_write+0xbb/0x2a0
      [<0000000087fde4c2>] ksys_write+0x59/0xd0
      [<00000000581e9cdf>] do_syscall_64+0x3a/0x80
      [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: 46bbe5c6 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Looking at the conditional lock acquire functions in the kernel due to
the new sparse support (see commit 4a557a5d "sparse: introduce
conditional lock acquire function attribute"), it became obvious that
the lockref code has a couple of them, but they don't match the usual
naming convention for the other ones, and their return value logic is
also reversed.

In the other very similar places, the naming pattern is '*_and_lock()'
(eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the
function returns true when the lock is taken.

The lockref code is superficially very similar to the refcount code,
only with the special "atomic wrt the embedded lock" semantics.  But
instead of the '*_and_lock()' naming it uses '*_or_lock()'.

And instead of returning true in case it took the lock, it returns true
if it *didn't* take the lock.

Now, arguably the reflock code is quite logical: it really is a "either
decrement _or_ lock" kind of situation - and the return value is about
whether the operation succeeded without any special care needed.

So despite the similarities, the differences do make some sense, and
maybe it's not worth trying to unify the different conditional locking
primitives in this area.

But while looking at this all, it did become obvious that the
'lockref_get_or_lock()' function hasn't actually had any users for
almost a decade.

The only user it ever had was the shortlived 'd_rcu_to_refcount()'
function, and it got removed and replaced with 'lockref_get_not_dead()'
back in 2013 in commits 0d98439e ("vfs: use lockred 'dead' flag to
mark unrecoverably dead dentries") and e5c832d5 ("vfs: fix dentry
RCU to refcounting possibly sleeping dput()")

In fact, that single use was removed less than a week after the whole
function was introduced in commit b3abd802 ("lockref: add
'lockref_get_or_lock() helper") so this function has been around for a
decade, but only had a user for six days.

Let's just put this mis-designed and unused function out of its misery.

We can think about the naming and semantic oddities of the remaining
'lockref_put_or_lock()' later, but at least that function has users.

And while the naming is different and the return value doesn't match,
that function matches the whole '{atomic,refcount}_dec_and_test()'
pattern much better (ie the magic happens when the count goes down to
zero, not when it is incremented from zero).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel tends to try to avoid conditional locking semantics because
it makes it harder to think about and statically check locking rules,
but we do have a few fundamental locking primitives that take locks
conditionally - most obviously the 'trylock' functions.

That has always been a problem for 'sparse' checking for locking
imbalance, and we've had a special '__cond_lock()' macro that we've used
to let sparse know how the locking works:

    # define __cond_lock(x,c)        ((c) ? ({ __acquire(x); 1; }) : 0)

so that you can then use this to tell sparse that (for example) the
spinlock trylock macro ends up acquiring the lock when it succeeds, but
not when it fails:

    #define raw_spin_trylock(lock)  __cond_lock(lock, _raw_spin_trylock(lock))

and then sparse can follow along the locking rules when you have code like

        if (!spin_trylock(&dentry->d_lock))
                return LRU_SKIP;
	.. sparse sees that the lock is held here..
        spin_unlock(&dentry->d_lock);

and sparse ends up happy about the lock contexts.

However, this '__cond_lock()' use does result in very ugly header files,
and requires you to basically wrap the real function with that macro
that uses '__cond_lock'.  Which has made PeterZ NAK things that try to
fix sparse warnings over the years [1].

To solve this, there is now a very experimental patch to sparse that
basically does the exact same thing as '__cond_lock()' did, but using a
function attribute instead.  That seems to make PeterZ happy [2].

Note that this does not replace existing use of '__cond_lock()', but
only exposes the new proposed attribute and uses it for the previously
unannotated 'refcount_dec_and_lock()' family of functions.

For existing sparse installations, this will make no difference (a
negative output context was ignored), but if you have the experimental
sparse patch it will make sparse now understand code that uses those
functions, the same way '__cond_lock()' makes sparse understand the very
similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()'
annotations.

Note that in some cases this will silence existing context imbalance
warnings.  But in other cases it may end up exposing new sparse warnings
for code that sparse just didn't see the locking for at all before.

This is a trial, in other words.  I'd expect that if it ends up being
successful, and new sparse releases end up having this new attribute,
we'll migrate the old-style '__cond_lock()' users to use the new-style
'__cond_acquires' function attribute.

The actual experimental sparse patch was posted in [3].

Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2]
Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3]
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs fixes from Darrick Wong:
 "This fixes some stalling problems and corrects the last of the
  problems (I hope) observed during testing of the new atomic xattr
  update feature.

   - Fix statfs blocking on background inode gc workers

   - Fix some broken inode lock assertion code

   - Fix xattr leaf buffer leaks when cancelling a deferred xattr update
     operation

   - Clean up xattr recovery to make it easier to understand.

   - Fix xattr leaf block verifiers tripping over empty blocks.

   - Remove complicated and error prone xattr leaf block bholding mess.

   - Fix a bug where an rt extent crossing EOF was treated as "posteof"
     blocks and cleaned unnecessarily.

   - Fix a UAF when log shutdown races with unmount"

* tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: prevent a UAF when log IO errors race with unmount
  xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
  xfs: don't hold xattr leaf buffers across transaction rolls
  xfs: empty xattr leaf header blocks are not corruption
  xfs: clean up the end of xfs_attri_item_recover
  xfs: always free xattri_leaf_bp when cancelling a deferred op
  xfs: use invalidate_lock to check the state of mmap_lock
  xfs: factor out the common lock flags assert
  xfs: introduce xfs_inodegc_push()
  xfs: bound maximum wait time for inodegc work

Pull nfsd fixes from Chuck Lever:
 "Notable regression fixes:

   - Fix NFSD crash during NFSv4.2 READ_PLUS operation

   - Fix incorrect status code returned by COMMIT operation"

* tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix READ_PLUS crasher
  NFSD: restore EINVAL error translation in nfsd_commit()

Pull parisc architecture fixes from Helge Deller:
 "Two important fixes for bugs in code which was added in 5.18:

   - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO

   - Fix 32-bit load-word unalignment exception handler which returned
     wrong values"

* tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix vDSO signal breakage on 32-bit kernel
  parisc/unaligned: Fix emulate_ldw() breakage

Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.

The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.

In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes: 	df24e178 ("parisc: Add vDSO support")
CC: stable@vger.kernel.org # 5.18
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - BPF program info linear (BPIL) data is accessed assuming 64-bit
   alignment resulting in undefined behavior as the data is just byte
   aligned. Fix it, Found using -fsanitize=undefined.

 - Fix 'perf offcpu' build on old kernels wrt task_struct's
   state/__state field.

 - Fix perf_event_attr.sample_type setting on the 'offcpu-time' event
   synthesized by the 'perf offcpu' tool.

 - Don't bail out when synthesizing PERF_RECORD_ events for pre-existing
   threads when one goes away while parsing its procfs entries.

 - Don't sort the task scan result from /proc, its not needed and
   introduces bugs when the main thread isn't the first one to be
   processed.

 - Fix uninitialized 'offset' variable on aarch64 in the unwind code.

 - Sync KVM headers with the kernel sources.

* tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf synthetic-events: Ignore dead threads during event synthesis
  perf synthetic-events: Don't sort the task scan result from /proc
  perf unwind: Fix unitialized 'offset' variable on aarch64
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf bpf: 8 byte align bpil data
  tools kvm headers arm64: Update KVM headers from the kernel sources
  perf offcpu: Accept allowed sample types only
  perf offcpu: Fix build failure on old kernels

Pull powerpc fixes from Michael Ellerman:

 - Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t.

 - Fix virt_addr_valid() when memory is hotplugged above the boot-time
   high_memory value.

 - Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly
   allocate a PMD page at PUD level.

 - Fix a couple of minor issues found since we enabled KASAN for 64-bit
   Book3S.

Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng
Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao.

* tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/memhotplug: Add add_pages override for PPC
  powerpc/bpf: Fix use of user_pt_regs in uapi
  powerpc/prom_init: Fix kernel config grep
  powerpc/book3e: Fix PUD allocation size in map_kernel_page()
  powerpc/xive/spapr: correct bitmap allocation size

When it synthesize various task events, it scans the list of task
first and then accesses later.  There's a window threads can die
between the two and proc entries may not be available.

Instead of bailing out, we can ignore that thread and move on.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should not sort the result as procfs already returns a proper
ordering of tasks.  Actually sorting the order caused problems that it
doesn't guararantee to process the main thread first.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit dc2cf4ca ("perf unwind: Fix segbase for ld.lld linked
objects") uncovered the following issue on aarch64:

    util/unwind-libunwind-local.c: In function 'find_proc_info':
    util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    386 |                         if (ofs > 0) {
        |                            ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    371 |                 if (ofs <= 0) {
        |                    ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    363 |                 if (ofs <= 0) {
        |                    ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    In file included from util/libunwind/arm64.c:37:

Fixes: dc2cf4ca ("perf unwind: Fix segbase for ld.lld linked objects")
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@cloudflare.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull libnvdimm fix from Vishal Verma:

 - Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
   where accounting for poison blocks to be cleared was off by one,
   causing a failure to clear the the last badblock in an nvdimm region.

* tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm: Fix badblocks clear off-by-one error

Pull thermal control fix from Rafael Wysocki:
 "Add a new CPU ID to the list of supported processors in the
  intel_tcc_cooling driver (Sumeet Pawnikar)"

* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake

Pull power management fixes from Rafael Wysocki:
 "These fix some issues in cpufreq drivers and some issues in devfreq:

   - Fix error code path issues related PROBE_DEFER handling in devfreq
     (Christian Marangi)

   - Revert an editing accident in SPDX-License line in the devfreq
     passive governor (Lukas Bulwahn)

   - Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
     devfreq driver (Miaoqian Lin)

   - Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)

   - Fix missing of_node_put for qoriq and pmac32 driver (Liang He)

   - Fix issues around throttle interrupt for qcom driver (Stephen Boyd)

   - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
     Regno)

   - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"

* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / devfreq: passive: revert an editing accident in SPDX-License line
  PM / devfreq: Fix kernel warning with cpufreq passive register fail
  PM / devfreq: Rework freq_table to be local to devfreq struct
  PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
  PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
  PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
  PM / devfreq: Mute warning on governor PROBE_DEFER
  PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
  cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
  cpufreq: pmac32-cpufreq: Fix refcount leak bug
  cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
  drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
  cpufreq: amd-pstate: Add resume and suspend callbacks

Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the
following one:

 - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).

* pm-cpufreq:
  cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
  cpufreq: pmac32-cpufreq: Fix refcount leak bug
  cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
  drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
  cpufreq: amd-pstate: Add resume and suspend callbacks

Merge tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix error handling in ibmaem driver initialization

 - Fix bad data reported by occ driver after setting power cap

 - Fix typos in pmbus/ucd9200 driver comments

* tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
  hwmon: (pmbus/ucd9200) fix typos in comments
  hwmon: (occ) Prevent power cap command overwriting poll response

If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.

Fixes: 8808a793 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull arm64 fix from Catalin Marinas:
 "Restore TLB invalidation for the 'break-before-make' rule on
  contiguous ptes (missed in a recent clean-up)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes

Pull s390 fixes from Alexander Gordeev:

 - Fix purgatory build process so bin2c tool does not get built
   unnecessarily and the Makefile is more consistent with other
   architectures.

 - Return earlier simple design of arch_get_random_seed_long|int() and
   arch_get_random_long|int() callbacks as result of changes in generic
   RNG code.

 - Fix minor comment typos and spelling mistakes.

* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/qdio: Fix spelling mistake
  s390/sclp: Fix typo in comments
  s390/archrandom: simplify back to earlier design and initialize earlier
  s390/purgatory: remove duplicated build rule of kexec-purgatory.o
  s390/purgatory: hard-code obj-y in Makefile
  s390: remove unneeded 'select BUILD_BIN2C'

Pull NFS client fixes from Anna Schumaker:

 - Allocate a fattr for _nfs4_discover_trunking()

 - Fix module reference count leak in nfs4_run_state_manager()

* tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4: Add an fattr allocation to _nfs4_discover_trunking()
  NFS: restore module put when manager exits.

Pull ceph fix from Ilya Dryomov:
 "A ceph filesystem fix, marked for stable.

  There appears to be a deeper issue on the MDS side, but for now we are
  going with this one-liner to avoid busy looping and potential soft
  lockups"

* tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client:
  ceph: wait on async create before checking caps for syncfs

Merge tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Three fixes for invalid memory accesses discovered by using KASAN
  while running the lvm2 testsuite's dm-raid tests. Includes changes to
  MD's raid5.c given the dependency dm-raid has on the MD code"

* tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix KASAN warning in raid5_add_disks
  dm raid: fix KASAN warning in raid5_remove_disk
  dm raid: fix accesses beyond end of raid member array

Pull io_uring fixes from Jens Axboe:
 "Two minor tweaks:

   - While we still can, adjust the send/recv based flags to be in
     ->ioprio rather than in ->addr2. This is consistent with eg accept,
     and also doesn't waste a full 64-bit field for flags (Pavel)

   - 5.18-stable fix for re-importing provided buffers. Not much real
     world relevance here as it'll only impact non-pollable files gone
     async, which is more of a practical test case rather than something
     that is used in the wild (Dylan)"

* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
  io_uring: fix provided buffer import
  io_uring: keep sendrecv flags in ioprio

Pull block fixes from Jens Axboe:

 - Fix for batch getting of tags in sbitmap (wuchi)

 - NVMe pull request via Christoph:
      - More quirks (Lamarque Vieira Souza, Pablo Greco)
      - Fix a fabrics disconnect regression (Ruozhu Li)
      - Fix a nvmet-tcp data_digest calculation regression (Sagi
        Grimberg)
      - Fix nvme-tcp send failure handling (Sagi Grimberg)
      - Fix a regression with nvmet-loop and passthrough controllers
        (Alan Adamson)

* tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
  nvmet: add a clear_ids attribute for passthru targets
  nvme: fix regression when disconnect a recovering ctrl
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
  nvme-tcp: always fail a request when sending it failed
  nvmet-tcp: fix regression in data_digest calculation
  lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()

Pull SCSI fix from James Bottomley:
 "One simple driver fix for a dma overrun"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Limit max hw sectors for v3 HW

Pull ATA fix from Damien Le Moal:

 - Fix a compilation warning with some versions of gcc/sparse when
   compiling the pata_cs5535 driver, from John.

* tag 'ata-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_cs5535: Fix W=1 warnings

Commit fb396bb4 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
removed TLB invalidation from get_clear_flush() [now get_clear_contig()]
on the basis that the core TLB invalidation code is aware of hugetlb
mappings backed by contiguous page-table entries and will cover the
correct virtual address range.

However, this change also resulted in the TLB invalidation being removed
from the "break" step in the break-before-make (BBM) sequence used
internally by huge_ptep_set_{access_flags,wrprotect}(), therefore
making the BBM sequence unsafe irrespective of later invalidation.

Although the architecture is desperately unclear about how exactly
contiguous ptes should be updated in a live page-table, restore TLB
invalidation to our BBM sequence under the assumption that BBM is the
right thing to be doing in the first place.

Fixes: fb396bb4 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629095349.25748-1-will@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull clk fixes from Stephen Boyd:
 "Two small fixes

   - Initialize a spinlock in the stm32 reset code

   - Add dt bindings to the clk maintainer filepattern"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK
  clk: stm32: rcc_reset: Fix missing spin_lock_init()

KASAN reported the following use after free bug when running
generic/475:

 XFS (dm-0): Mounting V5 Filesystem
 XFS (dm-0): Starting recovery (logdev: internal)
 XFS (dm-0): Ending recovery (logdev: internal)
 Buffer I/O error on dev dm-0, logical block 20639616, async page read
 Buffer I/O error on dev dm-0, logical block 20639617, async page read
 XFS (dm-0): log I/O error -5
 XFS (dm-0): Filesystem has been shut down due to log error (0x2).
 XFS (dm-0): Unmounting Filesystem
 XFS (dm-0): Please unmount the filesystem and rectify the problem(s).
 ==================================================================
 BUG: KASAN: use-after-free in do_raw_spin_lock+0x246/0x270
 Read of size 4 at addr ffff888109dd84c4 by task 3:1H/136

 CPU: 3 PID: 136 Comm: 3:1H Not tainted 5.19.0-rc4-xfsx #rc4 8e53ab5ad0fddeb31cee5e7063ff9c361915a9c4
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
 Workqueue: xfs-log/dm-0 xlog_ioend_work [xfs]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x34/0x44
  print_report.cold+0x2b8/0x661
  ? do_raw_spin_lock+0x246/0x270
  kasan_report+0xab/0x120
  ? do_raw_spin_lock+0x246/0x270
  do_raw_spin_lock+0x246/0x270
  ? rwlock_bug.part.0+0x90/0x90
  xlog_force_shutdown+0xf6/0x370 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
  xlog_ioend_work+0x100/0x190 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
  process_one_work+0x672/0x1040
  worker_thread+0x59b/0xec0
  ? __kthread_parkme+0xc6/0x1f0
  ? process_one_work+0x1040/0x1040
  ? process_one_work+0x1040/0x1040
  kthread+0x29e/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

 Allocated by task 154099:
  kasan_save_stack+0x1e/0x40
  __kasan_kmalloc+0x81/0xa0
  kmem_alloc+0x8d/0x2e0 [xfs]
  xlog_cil_init+0x1f/0x540 [xfs]
  xlog_alloc_log+0xd1e/0x1260 [xfs]
  xfs_log_mount+0xba/0x640 [xfs]
  xfs_mountfs+0xf2b/0x1d00 [xfs]
  xfs_fs_fill_super+0x10af/0x1910 [xfs]
  get_tree_bdev+0x383/0x670
  vfs_get_tree+0x7d/0x240
  path_mount+0xdb7/0x1890
  __x64_sys_mount+0x1fa/0x270
  do_syscall_64+0x2b/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

 Freed by task 154151:
  kasan_save_stack+0x1e/0x40
  kasan_set_track+0x21/0x30
  kasan_set_free_info+0x20/0x30
  ____kasan_slab_free+0x110/0x190
  slab_free_freelist_hook+0xab/0x180
  kfree+0xbc/0x310
  xlog_dealloc_log+0x1b/0x2b0 [xfs]
  xfs_unmountfs+0x119/0x200 [xfs]
  xfs_fs_put_super+0x6e/0x2e0 [xfs]
  generic_shutdown_super+0x12b/0x3a0
  kill_block_super+0x95/0xd0
  deactivate_locked_super+0x80/0x130
  cleanup_mnt+0x329/0x4d0
  task_work_run+0xc5/0x160
  exit_to_user_mode_prepare+0xd4/0xe0
  syscall_exit_to_user_mode+0x1d/0x40
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

This appears to be a race between the unmount process, which frees the
CIL and waits for in-flight iclog IO; and the iclog IO completion.  When
generic/475 runs, it starts fsstress in the background, waits a few
seconds, and substitutes a dm-error device to simulate a disk falling
out of a machine.  If the fsstress encounters EIO on a pure data write,
it will exit but the filesystem will still be online.

The next thing the test does is unmount the filesystem, which tries to
clean the log, free the CIL, and wait for iclog IO completion.  If an
iclog was being written when the dm-error switch occurred, it can race
with log unmounting as follows:

Thread 1				Thread 2

					xfs_log_unmount
					xfs_log_clean
					xfs_log_quiesce
xlog_ioend_work
<observe error>
xlog_force_shutdown
test_and_set_bit(XLOG_IOERROR)
					xfs_log_force
					<log is shut down, nop>
					xfs_log_umount_write
					<log is shut down, nop>
					xlog_dealloc_log
					xlog_cil_destroy
					<wait for iclogs>
spin_lock(&log->l_cilp->xc_push_lock)
<KABOOM>

Therefore, free the CIL after waiting for the iclogs to complete.  I
/think/ this race has existed for quite a few years now, though I don't
remember the ~2014 era logging code well enough to know if it was a real
threat then or if the actual race was exposed only more recently.

Fixes: ac983517 ("xfs: don't sleep in xlog_cil_force_lsn on shutdown")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

Pull drm fixes from Dave Airlie:
 "Bit quieter this week, the main thing is it pulls in the fixes for the
  sysfb resource issue you were seeing. these had been queued for next
  so should have had some decent testing.

  Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.

  fbdev:
   - sysfb fixes/conflicting fb fixes

  amdgpu:
   - GPU recovery fix

   - Fix integer type usage in fourcc header for AMD modifiers

   - KFD TLB flush fix for gfx9 APUs

   - Display fix

  i915:
   - Fix ioctl argument error return

   - Fix d3cold disable to allow PCI upstream bridge D3 transition

   - Fix setting cache_dirty for dma-buf objects on discrete

  msm:
   - Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
     that userspace sees the value *after* it is incremented if waiting
     for vblank events

   - Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
     in probe/bind error paths

   - Fix to resolve the smatch error of de-referencing before NULL check
     in dpu_encoder_phys_wb.c

   - Fix error return to userspace if fence-id allocation fails in
     submit ioctl

  vc4:
   - NULL ptr dereference fix"

* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
  drm/amdgpu: To flush tlb for MMHUB of RAVEN series
  drm/fourcc: fix integer type usage in uapi header
  drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
  fbdev: Disable sysfb device registration when removing conflicting FBs
  firmware: sysfb: Add sysfb_disable() helper function
  firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
  drm/msm/gem: Fix error return on fence id alloc fail
  drm/i915: tweak the ordering in cpu_write_needs_clflush
  drm/i915/dgfx: Disable d3cold at gfx root port
  drm/i915/gem: add missing else
  drm/vc4: perfmon: Fix variable dereferenced before check
  drm/msm/dpu: Fix variable dereferenced before check
  drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
  drm/msm/dpu: Increment vsync_cnt before waking up userspace

A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - new code bugs:

   - clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()

   - mptcp:
      - invoke MP_FAIL response only when needed
      - fix shutdown vs fallback race
      - consistent map handling on failure

   - octeon_ep: use bitwise AND

  Previous releases - regressions:

   - tipc: move bc link creation back to tipc_node_create, fix NPD

  Previous releases - always broken:

   - tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
     buffered skbs from keeping refcount on the conntrack module

   - ipv6: take care of disable_policy when restoring routes

   - tun: make sure to always disable and unlink NAPI instances

   - phy: don't trigger state machine while in suspend

   - netfilter: nf_tables: avoid skb access on nf_stolen

   - asix: fix "can't send until first packet is send" issue

   - usb: asix: do not force pause frames support

   - nxp-nci: don't issue a zero length i2c_master_read()

  Misc:

   - ncsi: allow use of proper "mellanox" DT vendor prefix

   - act_api: add a message for user space if any actions were already
     flushed before the error was hit"

* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  net: dsa: felix: fix race between reading PSFP stats and port stats
  selftest: tun: add test for NAPI dismantle
  net: tun: avoid disabling NAPI twice
  net: sparx5: mdb add/del handle non-sparx5 devices
  net: sfp: fix memory leak in sfp_probe()
  mlxsw: spectrum_router: Fix rollback in tunnel next hop init
  net: rose: fix UAF bugs caused by timer handler
  net: usb: ax88179_178a: Fix packet receiving
  net: bonding: fix use-after-free after 802.3ad slave unbind
  ipv6: fix lockdep splat in in6_dump_addrs()
  net: phy: ax88772a: fix lost pause advertisement configuration
  net: phy: Don't trigger state machine while in suspend
  usbnet: fix memory allocation in helpers
  selftests net: fix kselftest net fatal error
  NFC: nxp-nci: don't print header length mismatch on i2c error
  NFC: nxp-nci: Don't issue a zero length i2c_master_read()
  net: tipc: fix possible refcount leak in tipc_sk_create()
  nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
  net: ipv6: unexport __init-annotated seg6_hmac_net_init()
  ipv6/sit: fix ipip6_tunnel_get_prl return value
  ...

A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.

Before commit 5dae222a ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems.  After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.

Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.

Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().

This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().

Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user.  Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e.  nfsv3).

Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb.  This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().

nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.

fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.

Fixes: 5dae222a ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff5 ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Looks like there are still cases when "space_left - frag1bytes" can
legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains
within the current encode buffer.
Reported-by: Bruce Fields <bfields@fieldses.org>
Reported-by: Zorro Lang <zlang@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151
Fixes: 6c254bf3 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>