- 13 May, 2022 15 commits
-
-
Lukas Bulwahn authored
Commit 46fb9995 ("media: platform: place NXP drivers on a separate dir") moves various files in media/platform into a nxp subdirectory. It adjusts the section MEDIA DRIVER FOR FREESCALE IMX PXP in MAINTAINERS, but misses some references in NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS FOR FREESCALE IMX7. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Adjust the file references in the NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS FOR FREESCALE IMX7 sections. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Laurent Pinchart authored
The v4l2_m2m_dev structure documentation incorrectly references the v4l2_m2m_unregister_media_controller() function when it actually means v4l2_m2m_register_media_controller(). Fix it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Tom Rix authored
smb_word_op() has a parameter data_format that determines if the data is either a byte or word. From inspection, smb_word_op() is only used by the macros smb_wr16() and smb_rd16() both pass in CMD_WORD_DATA. There is no use of smb_word_op() that passes in CMD_BYTE_DATA. So remove the byte handling. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Laurentiu Palcu authored
The subdevice entity function was left unset, which produces a warning when probing the device: mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was not initialized! This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave flags unset. Fixes: 34009bff ("media: i2c: Add RDACM20 driver") Fixes: a59f853b ("media: i2c: Add driver for RDACM21 camera module") Signed-off-by:
Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Mirela Rabulea authored
Fix smatch warning in mxc_jpeg_queue_setup, check *nplanes against current format: drivers/media/platform/imx-jpeg/mxc-jpeg.c:1070 mxc_jpeg_queue_setup() warn: potential user controlled iterator 'i' (array size 2 vs 7) Signed-off-by:Mirela Rabulea <mirela.rabulea@oss.nxp.com> Signed-off-by:
-
Lukas Bulwahn authored
After sending a patch to Rick Chang, the mediatek mail server responded: ** Message not delivered ** Your message couldn't be delivered to rick.chang@mediatek.com because the remote server is misconfigured. See technical details below for more information. The response from the remote server was: 550 Relaying mail to rick.chang@mediatek.com is not allowed So, drop Rick Chang from the MEDIATEK JPEG DRIVER section. Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Signed-off-by:
-
Lukas Bulwahn authored
Commit 9cdd70ce ("media: dt-bindings: media: mtk-vcodec: Separate video encoder and decoder dt-bindings") converts and splits mediatek-vcodec.txt to mediatek,vcodec-{de,en}coder.yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in MEDIATEK MEDIA DRIVER. Signed-off-by:
-
Lukas Bulwahn authored
Commit a16ce2f3 ("media: dt-bindings: mediatek: convert mtk jpeg decoder/encoder to yaml") converts mediatek-jpeg-decoder.txt to yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. While touching this section, generalize the file entry to also cover the encoder yaml devicetree, as the driver directory also includes the encoder. Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array table on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Lukas Bulwahn authored
Commit ccc30162 ("media: dt: bindings: tegra-vde: Convert to schema") converts nvidia,tegra-vde.txt to nvidia,tegra-vde.yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in MEDIA DRIVERS FOR NVIDIA TEGRA - VDE. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Miaoqian Lin authored
The pm_runtime_enable will decrease power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 0a0e2655 ("media: atmel: atmel-isc: split driver into driver base and isc") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Miaoqian Lin authored
The pm_runtime_enable will decrease power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: f386509e ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver") Signed-off-by:
Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by:
-
Miaoqian Lin authored
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Fixes: 9a761e43 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
Christophe JAILLET authored
A dma_free_coherent() call is missing in the error handling path of the probe, as already done in the remove function. In fact, this call is included in aspeed_video_free_buf(). So use the latter both in the error handling path of the probe and in the remove function. It is easier to see the relation with aspeed_video_alloc_buf() this way. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Nícolas F. R. A. Prado authored
The encoder node may be dependent on a power-domain. Add a property for it. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 08 May, 2022 8 commits
-
-
James_Lin authored
This patch aims to add UVC_GUID_FORMAT_H265 High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2. They describe the same video encoding method. So for handling their behavior is the same. However, when external camera device describes this encoding method, some use hevc, some use h265. There is no uniform specification to describe this encoding method. So if an external camera device use h265 to describe this encoding method, driver will not recognize it. Therefore, this patch is to enable driver to read HEVC/H265 and convert it to V4L2_PIX_FMT_HEVC. Signed-off-by:
James_Lin <Ping-lei.Lin@mediatek.com> Reviewed-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Ricardo Ribalda authored
Replace manual decoding of psize in uvc_parse_streaming(), with the code from uvc_endpoint_max_bpi(). It also handles usb3 devices. Signed-off-by:
-
Ricardo Ribalda authored
The case USB_SPEED_WIRELESS and the default one were doing the same. Also, make always use of usb_endpoint_maxp_mult, as it should have a sane value, even for LOW speed and WIRELESS. Signed-off-by:
-
Ricardo Ribalda authored
Move all the life cycle of the name to add_mapping. This simplifies the error handling inside uvc_ioctl_ctrl_map and solves a memory leak when kemmdup fails. Also make sure that for custom controls, the user provides a valid name. Fixes: 07adedb5c606 ("media: uvcvideo: Use control names from framework") Signed-off-by: -
Hangyu Hua authored
probe->dwMaxPayloadTransferSize is a 32bit value, but bandwidth is 16bit. This may lead to a bit overflow. Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Signed-off-by:
-
Xiaomeng Tong authored
The list iterator will point to a bogus position containing HEAD if the list is empty or the element is not found in list. This case should be checked before any use of the iterator, otherwise it will lead to a invalid memory access. The missing check here is before "pin = iterm->id;", just add check here to fix the security bug. In addition, the list iterator value will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the element is not found in list, considering the (mis)use here: "if (iterm == NULL". Use a new value 'it' as the list iterator, while use the old value 'iterm' as a dedicated pointer to point to the found element, which 1. can fix this bug, due to 'iterm' is NULL only if it's not found. 2. do not need to change all the uses of 'iterm' after the loop. 3. can also limit the scope of the list iterator 'it' *only inside* the traversal loop by simply declaring 'it' inside the loop in the future, as usage of the iterator outside of the list_for_each_entry is considered harmful. https://lkml.org/lkml/2022/2/17/1032 Fixes: d5e90b7a ("[media] uvcvideo: Move to video_ioctl2") Signed-off-by:
Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by:
-
Jonathan Neuschäfer authored
As discussed with other developers, the linux-uvc-devel mailing list is not very useful anymore, and it's better to send people to the general linux-media mailing list. Replace/remove the old mailing list address in uvcvideo.rst and MAINTAINERS. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Sean Young authored
Do not handroll mdelay(). Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 25 Apr, 2022 1 commit
-
-
Hans Verkuil authored
The indentation was wrong, causing the documentation build to fail with: Sphinx parallel build error: docutils.utils.SystemMessagePropagation: <system_message level="3" line="1202" source="/home/hans/work/src/v4l/media-git/Documentation/media/userspace-api/v4l/ext-ctrls-codec.rst" type="ERROR"><paragraph>Error parsing content block for the "flat-table" directive: two-level bullet list expected, but row 1 does not contain a second-level bullet list.</paragraph><literal_block xml:space="preserve">.. flat-table:: :header-rows: 0 :stub-columns: 0 * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM`` - The whole frame is completely refreshed randomly after the specified period. * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC`` - The whole frame MBs are completely refreshed in cyclic order after the specified period. </literal_block></system_message> make[1]: *** [Documentation/Makefile:96: htmldocs] Error 2 make: *** [Makefile:1678: htmldocs] Error 2 Link: https://lore.kernel.org/linux-media/62b53cbb-f3e2-ed8a-bba2-3f4145d9b8db@xs4all.nl Fixes: fcbc4acf ("media: v4l2-ctrls: Add intra-refresh type control") Signed-off-by:
-
- 24 Apr, 2022 16 commits
-
-
Fabio Estevam authored
There is no need to pass 'default n' in Kconfig, as by default the CONFIG_VIDEO_IMX_MIPI_CSIS option is not selected. Signed-off-by:
Fabio Estevam <festevam@denx.de> Signed-off-by:
-
Laurent Pinchart authored
Commit 5c0701a0 ("media: imx: csis: Store pads format separately") broke initialization of the active format on the source pad, as it forgot to update the .init_cfg() handler. Fix it. Fixes: 5c0701a0 ("media: imx: csis: Store pads format separately") Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Jacopo Mondi authored
The mipi_csis_dump_regs() function accesses the interface registers in order to printout their values for debug purposes. As the function access the registers, it requires the interface to be powered up. Currently this is only enforced in one of the function's callers (mipi_csis_log_status)() but not when the function is called by the debugfs attribute handler. Make sure to access registers only if the interface is powered up and remove the same check from the caller. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Acked-by:
-
Jacopo Mondi authored
The mipi_csis_device.powered flag only serves for the purpose of not accessing registers in mipi_csis_log_status() when the interface is not powered up. Instead of manually tracking the power state, rely on pm_runtime_get_if_in_use() to remove the 'powered' flag. Also remove the locking in the function as runtime_pm() is refcounted and there's no risk of the interface being powered down behind our backs. Signed-off-by:
-
Jacopo Mondi authored
Simplify the mipi_csis_s_stream() function. This actually fixes a bug, as if calling the subdev's s_stream(1) fails, mipi_csis_stop_stream() was not called. Signed-off-by:
-
Laurent Pinchart authored
The runtime PM resume handler is guaranteed to be called on a suspended device, and the suspend handler on a resumed device. The implementation can thus be simplified. While at it, rename the mipi_csis_device state field to powered, as the now state contains a single flag only. Signed-off-by:
-
Laurent Pinchart authored
Streaming is guaranteed to have been stopped by the time the device gets runtime suspended, as pm_runtime_put() is called from .s_stream(0) only. Drop the manual stop. Signed-off-by:
-
Laurent Pinchart authored
There's no need to implement system suspend/resume manually, as video pipelines are supposed to be suspended in a controlled and ordered manner by the data sink driver at system suspend time (and similarly at resume time). Drop the system suspend/resume handlers. Signed-off-by:
-
Laurent Pinchart authored
The subdev .s_power() operation is deprecated. Drop it, requiring sensor drivers to correctly use runtime PM instead of relying on .s_power(). As this driver has just been moved out of staging, and necessary drivers to implement a full camera pipeline are still in staging, no platform depends yet on this API being called. There is thus no risk of regression. Signed-off-by:
-
Laurent Pinchart authored
Usage of "state" for the device-specific data structure is confusing, as it can also refer to the subdev state. Rename the structure to mipi_csis_device, and the corresponding state variables to csis. Signed-off-by:
-
Chen-Yu Tsai authored
The payload size for encoder capture buffers is set by the driver upon finishing encoding each frame, based on the encoded length returned from hardware, and whatever header and padding length used. Setting a non-zero default serves no real purpose, and also causes issues if the capture buffer is returned to userspace unused, confusing the application. Instead, always set the payload size to 0 for encoder capture buffers when preparing them. Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver") Fixes: 082aaecf ("media: hantro: Fix .buf_prepare") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Chen-Yu Tsai authored
The V4L2 stateful encoder uAPI specification requires that drivers support the ENCODER_CMD ioctl to allow draining of buffers. This however was not implemented, and causes issues for some userspace applications. Implement support for the ENCODER_CMD ioctl using v4l2-mem2mem helpers. This is entirely based on existing code found in the vicodec test driver. Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver") Signed-off-by:
-
Piotr Oniszczuk authored
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch adds RK3568 compatible in rockchip-vpu dt-bindings. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txtSigned-off-by:
Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Reviewed-by:
-
Piotr Oniszczuk authored
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch adds support for RK356x family in existing Hantro video decoder kernel driver. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txtSigned-off-by:
-
Ming Qian authored
For interlaced frame, the amphion vpu will store the two fields sequential into one buffer, top-bottom order so the field should be set to V4L2_FIELD_SEQ_TB. fix the previous bug that set it to V4L2_FIELD_SEQ_BT wrongly. Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Wan Jiabing authored
use if and else instead of if(A) and if (!A). Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
