- 08 Aug, 2018 27 commits
-
-
Sergio Paracuellos authored
Use pcie_[read|write] fucntions to read and write controller registers. Define those only by offset and pass controller offset + register offset relative to base address to functions. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Tested-by:
NeilBrown <neil@brown.name> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
There some macros that are not being used. Remove them. Signed-off-by:
-
Sergio Paracuellos authored
write_config function is always called with bus and func being 0. Avoid those params and just use 0 inside the function. Review parameter types changing for more proper ones. Signed-off-by:
-
Sergio Paracuellos authored
read_config function is always called with bus and func being 0. Avoid those params and just use 0 inside the function. Return readed value instead pass a reference parameter. Signed-off-by:
-
Sergio Paracuellos authored
Instead of custom macros use pcie_read and pcie_write functions. Signed-off-by:
-
Sergio Paracuellos authored
Introdice this functions to make easier to write/read to/from an offset relative to base address Signed-off-by:
-
Sergio Paracuellos authored
Driver is using now pci subsystem generics reads and writes and requesting bus resources without using legacy code functions. Because of this there is a lot of dead code that can be removed. Signed-off-by:
-
Sergio Paracuellos authored
map_bus callback is called before every .read/.write operation. Implement it and change custom read write operations for the pci subsystem generics. Make the probe function to don't use legacy stuff and request bus resources directly. Get pci register base and ranges from device tree. The driver is not using PCI_LEGACY code anymore and shall use the PCI_DRIVERS_GENERIC option to correct compile it. Add also new Kconfig file for this controller setting there its correct dependencies. Signed-off-by:
-
Michael Straube authored
On a Raven Ridge system with a r8188eu usb wifi device commit 515ce733 ("staging:r8188eu: Use lib80211 to encrypt (CCMP) tx frames") is causing two bugs and a warning in dmesg: [ 22.618465] BUG: scheduling while atomic: NetworkManager/489/0x00000202 [ 22.618466] Modules linked in: amdkfd amd_iommu_v2 amdgpu nls_iso8859_1 nls_cp437 vfat fat r8188eu(C) edac_mce_amd chash kvm_amd gpu_sched i2c_algo_bit ccp ttm rng_core lib80211 kvm snd_hda_codec_realtek snd_hda_codec_generic cfg80211 snd_hda_codec_hdmi snd_hda_intel input_leds drm_kms_helper irqbypass snd_hda_codec crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc rfkill led_class mousedev joydev wmi_bmof snd_hda_core drm aesni_intel snd_hwdep aes_x86_64 crypto_simd cryptd glue_helper snd_pcm pcspkr sp5100_tco snd_timer r8169 k10temp agpgart i2c_piix4 snd mii syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore rtc_cmos evdev gpio_amdpt pinctrl_amd mac_hid wmi pcc_cpufreq acpi_cpufreq crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto hid_generic usbhid hid sd_mod [ 22.618549] ahci xhci_pci libahci xhci_hcd crc32c_intel libata usbcore scsi_mod usb_common [ 22.618554] Preemption disabled at: [ 22.618558] [<ffffffff94600954>] __dev_queue_xmit+0x74/0x910 [ 22.618561] CPU: 3 PID: 489 Comm: NetworkManager Tainted: G C 4.18.0-rc7-staging+ #14 [ 22.618562] Hardware name: Gigabyte Technology Co., Ltd. A320M-S2H/A320M-S2H-CF, BIOS F23d 04/17/2018 [ 22.618563] Call Trace: [ 22.618569] dump_stack+0x5c/0x80 [ 22.618571] ? __dev_queue_xmit+0x74/0x910 [ 22.618574] __schedule_bug.cold.14+0x82/0x9b [ 22.618576] __schedule+0x6fd/0x8b0 [ 22.618578] ? enqueue_task_fair+0xc3/0x730 [ 22.618580] schedule+0x32/0x90 [ 22.618581] schedule_timeout+0x311/0x4a0 [ 22.618583] ? _raw_spin_unlock_irqrestore+0x20/0x40 [ 22.618585] ? try_to_wake_up+0x231/0x480 [ 22.618586] wait_for_common+0x15f/0x190 [ 22.618588] ? wake_up_q+0x70/0x70 [ 22.618597] ? rtw_aes_encrypt+0x26f/0x290 [r8188eu] [ 22.618598] wait_for_completion_killable+0x19/0x30 [ 22.618601] call_usermodehelper_exec+0x115/0x160 [ 22.618603] __request_module+0x1ac/0x3e2 [ 22.618606] ? netlink_broadcast_filtered+0x142/0x400 [ 22.618607] ? netlink_broadcast+0xf/0x20 [ 22.618615] rtw_aes_encrypt+0x26f/0x290 [r8188eu] [ 22.618622] ? rtw_get_stainfo+0xe6/0x130 [r8188eu] [ 22.618629] rtw_xmitframe_coalesce+0x950/0xb00 [r8188eu] [ 22.618631] ? _raw_spin_lock_irqsave+0x25/0x50 [ 22.618638] rtw_hal_xmit+0x83/0x130 [r8188eu] [ 22.618645] rtw_xmit+0x258/0x5d0 [r8188eu] [ 22.618652] rtw_xmit_entry+0xe8/0x2e7 [r8188eu] [ 22.618654] dev_hard_start_xmit+0xa5/0x240 [ 22.618657] sch_direct_xmit+0x150/0x340 [ 22.618658] __dev_queue_xmit+0x2f6/0x910 [ 22.618661] packet_sendmsg+0x948/0x15a7 [ 22.618663] ? attach_to_pi_owner+0x38/0x180 [ 22.618666] sock_sendmsg+0x33/0x40 [ 22.618668] __sys_sendto+0xee/0x160 [ 22.618670] ? memzero_explicit+0xa/0x10 [ 22.618672] ? urandom_read+0x120/0x270 [ 22.618675] __x64_sys_sendto+0x24/0x30 [ 22.618677] do_syscall_64+0x5b/0x170 [ 22.618678] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.618680] RIP: 0033:0x7f0942790c12 [ 22.618680] Code: 48 83 ec 18 44 89 4c 24 08 e8 9a f5 ff ff 44 8b 4c 24 08 4d 89 f8 45 89 f2 89 c5 4c 89 ea 4c 89 e6 89 df b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a 89 ef 48 89 44 24 08 e8 ca f5 ff ff 48 8b [ 22.618700] RSP: 002b:00007ffe2051be30 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 22.618701] RAX: ffffffffffffffda RBX: 0000000000000011 RCX: 00007f0942790c12 [ 22.618702] RDX: 0000000000000148 RSI: 0000559278761700 RDI: 0000000000000011 [ 22.618703] RBP: 0000000000000000 R08: 00005592787aa860 R09: 0000000000000014 [ 22.618703] R10: 0000000000000000 R11: 0000000000000293 R12: 0000559278761700 [ 22.618704] R13: 0000000000000148 R14: 0000000000000000 R15: 00005592787aa860 [ 22.620488] lib80211_crypt: registered algorithm 'CCMP' [ 22.620735] ------------[ cut here ]------------ [ 22.620738] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 22.620744] WARNING: CPU: 3 PID: 489 at kernel/sched/core.c:3246 preempt_count_sub+0x5a/0x90 [ 22.620749] Modules linked in: lib80211_crypt_ccmp amdkfd amd_iommu_v2 amdgpu nls_iso8859_1 nls_cp437 vfat fat r8188eu(C) edac_mce_amd chash kvm_amd gpu_sched i2c_algo_bit ccp ttm rng_core lib80211 kvm snd_hda_codec_realtek snd_hda_codec_generic cfg80211 snd_hda_codec_hdmi snd_hda_intel input_leds drm_kms_helper irqbypass snd_hda_codec crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc rfkill led_class mousedev joydev wmi_bmof snd_hda_core drm aesni_intel snd_hwdep aes_x86_64 crypto_simd cryptd glue_helper snd_pcm pcspkr sp5100_tco snd_timer r8169 k10temp agpgart i2c_piix4 snd mii syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore rtc_cmos evdev gpio_amdpt pinctrl_amd mac_hid wmi pcc_cpufreq acpi_cpufreq crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto hid_generic [ 22.620792] usbhid hid sd_mod ahci xhci_pci libahci xhci_hcd crc32c_intel libata usbcore scsi_mod usb_common [ 22.620803] CPU: 3 PID: 489 Comm: NetworkManager Tainted: G WC 4.18.0-rc7-staging+ #14 [ 22.620804] Hardware name: Gigabyte Technology Co., Ltd. A320M-S2H/A320M-S2H-CF, BIOS F23d 04/17/2018 [ 22.620808] RIP: 0010:preempt_count_sub+0x5a/0x90 [ 22.620809] Code: 14 f7 6b c3 e8 57 89 2d 00 85 c0 74 f6 8b 15 55 6a 5a 01 85 d2 75 ec 48 c7 c6 2e 01 e7 94 48 c7 c7 db b2 e5 94 e8 90 77 fd ff <0f> 0b c3 84 d2 75 c9 e8 2a 89 2d 00 85 c0 74 c9 8b 05 28 6a 5a 01 [ 22.620842] RSP: 0018:ffffa1904133bc48 EFLAGS: 00010286 [ 22.620844] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 22.620846] RDX: 0000000080000001 RSI: ffffffff94e82606 RDI: 00000000ffffffff [ 22.620847] RBP: ffff8eb4449eac00 R08: 0000001af4246984 R09: 00000000000003f1 [ 22.620849] R10: ffffffff955f7700 R11: 0000000000000000 R12: ffff8eb4449eacac [ 22.620850] R13: ffff8eb4565da800 R14: ffff8eb453ca2000 R15: 0000000000000003 [ 22.620852] FS: 00007f0944d69000(0000) GS:ffff8eb45ecc0000(0000) knlGS:0000000000000000 [ 22.620853] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.620854] CR2: 00007ffe20518fa8 CR3: 0000000207844000 CR4: 00000000003406e0 [ 22.620855] Call Trace: [ 22.620859] _raw_spin_unlock+0x16/0x30 [ 22.620862] sch_direct_xmit+0x178/0x340 [ 22.620866] __dev_queue_xmit+0x2f6/0x910 [ 22.620870] packet_sendmsg+0x948/0x15a7 [ 22.620873] ? attach_to_pi_owner+0x38/0x180 [ 22.620877] sock_sendmsg+0x33/0x40 [ 22.620880] __sys_sendto+0xee/0x160 [ 22.620885] ? memzero_explicit+0xa/0x10 [ 22.620887] ? urandom_read+0x120/0x270 [ 22.620891] __x64_sys_sendto+0x24/0x30 [ 22.620893] do_syscall_64+0x5b/0x170 [ 22.620896] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.620898] RIP: 0033:0x7f0942790c12 [ 22.620899] Code: 48 83 ec 18 44 89 4c 24 08 e8 9a f5 ff ff 44 8b 4c 24 08 4d 89 f8 45 89 f2 89 c5 4c 89 ea 4c 89 e6 89 df b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a 89 ef 48 89 44 24 08 e8 ca f5 ff ff 48 8b [ 22.620925] RSP: 002b:00007ffe2051be30 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 22.620928] RAX: ffffffffffffffda RBX: 0000000000000011 RCX: 00007f0942790c12 [ 22.620929] RDX: 0000000000000148 RSI: 0000559278761700 RDI: 0000000000000011 [ 22.620930] RBP: 0000000000000000 R08: 00005592787aa860 R09: 0000000000000014 [ 22.620931] R10: 0000000000000000 R11: 0000000000000293 R12: 0000559278761700 [ 22.620933] R13: 0000000000000148 R14: 0000000000000000 R15: 00005592787aa860 [ 22.620936] ---[ end trace ecf9299fa6cc3176 ]--- [ 22.620940] BUG: using __this_cpu_read() in preemptible [00000000] code: NetworkManager/489 [ 22.620942] caller is __local_bh_enable_ip+0x50/0x80 [ 22.620945] CPU: 3 PID: 489 Comm: NetworkManager Tainted: G WC 4.18.0-rc7-staging+ #14 [ 22.620946] Hardware name: Gigabyte Technology Co., Ltd. A320M-S2H/A320M-S2H-CF, BIOS F23d 04/17/2018 [ 22.620947] Call Trace: [ 22.620950] dump_stack+0x5c/0x80 [ 22.620955] check_preemption_disabled.cold.0+0x46/0x51 [ 22.620958] __local_bh_enable_ip+0x50/0x80 [ 22.620961] __dev_queue_xmit+0x450/0x910 [ 22.620964] packet_sendmsg+0x948/0x15a7 [ 22.620967] ? attach_to_pi_owner+0x38/0x180 [ 22.620971] sock_sendmsg+0x33/0x40 [ 22.620973] __sys_sendto+0xee/0x160 [ 22.620976] ? memzero_explicit+0xa/0x10 [ 22.620978] ? urandom_read+0x120/0x270 [ 22.620982] __x64_sys_sendto+0x24/0x30 [ 22.620984] do_syscall_64+0x5b/0x170 [ 22.620986] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.620990] RIP: 0033:0x7f0942790c12 [ 22.620991] Code: 48 83 ec 18 44 89 4c 24 08 e8 9a f5 ff ff 44 8b 4c 24 08 4d 89 f8 45 89 f2 89 c5 4c 89 ea 4c 89 e6 89 df b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a 89 ef 48 89 44 24 08 e8 ca f5 ff ff 48 8b [ 22.621017] RSP: 002b:00007ffe2051be30 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 22.621020] RAX: ffffffffffffffda RBX: 0000000000000011 RCX: 00007f0942790c12 [ 22.621021] RDX: 0000000000000148 RSI: 0000559278761700 RDI: 0000000000000011 [ 22.621024] RBP: 0000000000000000 R08: 00005592787aa860 R09: 0000000000000014 [ 22.621025] R10: 0000000000000000 R11: 0000000000000293 R12: 0000559278761700 [ 22.621026] R13: 0000000000000148 R14: 0000000000000000 R15: 00005592787aa860 Revert the commit fixes the issues and dmesg looks good again. Fixes: 515ce733 ("staging:r8188eu: Use lib80211 to encrypt (CCMP) tx frames") Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Gao Xiang authored
There is an extra semicolon in z_erofs_vle_unzip_all, remove it. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
zhong jiang authored
That semicolons are unneeded, Just remove them. Signed-off-by:
-
Sumit Pundir authored
Fixed a coding style issue related to indentation. Reported by checkpatch.pl Signed-off-by:
Sumit Pundir <pundirsumit11@gmail.com> Signed-off-by:
-
Todd Poynor authored
A copy-and-pasted comment from another code sequence is removed from gasket core init sequence. Signed-off-by:
Todd Poynor <toddpoynor@google.com> Signed-off-by:
-
Todd Poynor authored
The apex device is left out of reset mode at the end of device probe/initialize processing. Add a call to enter reset at the end of the sequence, triggering power gating and other low power features. Signed-off-by:
-
Todd Poynor authored
Keep mutex held across the unregistration operation, until the driver_desc field of the global table is removed, to prevent a concurrent accessor from looking up the driver_desc while gasket_unregister_device() is in the processing of removing it. Reported-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Todd Poynor authored
The gasket framework no longer provides callbacks to the device driver for sysfs setup and teardown. Move the sysfs setup code to the device probe function. Apex does not implement sysfs cleanup code. Signed-off-by:
-
Todd Poynor authored
Gasket device drivers now call into the gasket framework to initialize and de-initialize, rather than the other way around. The calling code can perform sysfs setup and cleanup actions without callbacks from the framework. Remove the sysfs setup and cleanup callbacks. Signed-off-by:
-
Todd Poynor authored
Gasket device drivers are now in charge of the device add and remove sequences; the framework callbacks for these are deleted. Move the apex device add callback code to the probe function. Apex did not implement the removal callback. Signed-off-by:
-
Todd Poynor authored
Gasket device drivers are now in charge of orchestrating the device add and removal sequences, so the callbacks from the framework to the device drivers for these events are no longer needed. Signed-off-by:
-
Todd Poynor authored
Gasket framework now places device drivers in charge of calling APIs to enable and disable gasket device operations. Make the appropriate calls from the apex driver. Signed-off-by:
-
Todd Poynor authored
Move gasket device enable/disable functions from internal calls to external calls from the gasket device drivers. The device driver will call these functions at appropriate times in its processing, placing the device driver in control of this sequence and reducing the need for callbacks from framework back to the device drivers during the enable/disable sequences. Signed-off-by:
-
Todd Poynor authored
These are not implemented for apex, and are now being removed from the gasket framework. Signed-off-by:
-
Todd Poynor authored
Device enable/disable operations are moving from being initiated through the gasket framework to being initiated by the gasket device driver. The driver can perform any processing needed for these operations before or after the calls into the framework. Neither of these callbacks are implemented for the only gasket driver upstream today, apex. Signed-off-by:
-
Todd Poynor authored
Remaining info-level logs in gasket core converted to debug-level; the information is not needed during normal system operation. Signed-off-by:
-
Todd Poynor authored
Apex driver moves PCI core calls like probe, enable, and remove from gasket to apex. Call new functions in gasket to register apex as a PCI device to the gasket framework. Signed-off-by:
-
Todd Poynor authored
Remove gasket wrapping of PCI probe, enable, disable, and remove functions. Replace with calls to add and remove PCI gasket devices, to be called by the gasket device drivers. Signed-off-by:
-
Todd Poynor authored
If kcalloc() returns NULL in put_mapping(), continue to clean up state, including dropping the reference on the struct device and free attribute memory. Signed-off-by:
-
- 05 Aug, 2018 13 commits
-
-
Kristaps Čivkulis authored
Fix coding style issue "do not use assignment in if condition" detected by checkpatch.pl. Signed-off-by:
Kristaps Čivkulis <kristaps.civkulis@gmail.com> Reviewed-by:
-
Michael Straube authored
In the header rtw_iol.h there is only one function declared. Remove the include of rtw_iol.h from files that do not use this function. Signed-off-by:
-
Michael Straube authored
The header osdep_service.h is included from drv_types.h, so remove the redundant include. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses from if conditions. Signed-off-by:
-
Michael Straube authored
Rename rtw_IOL_applied to be all lowercase. rtw_IOL_applied -> rtw_iol_applied Signed-off-by:
-
John Whitmore authored
Replace the magic number '8' with defined constant which is normally used 'MAX_DEV_ADDR_SIZE'. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
John Whitmore <johnfwhitmore@gmail.com> Signed-off-by:
-
John Whitmore authored
Removal of three comments. The comments in question do not add anything to the understanding of the code, and if they are necessary it would imply that the structure and its member variables are badly named. This is a simple style change and should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Removal of a blank like which causes a checkpatch issue. This is a simple coding style change and should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
All of the variables used within the structures of the union qos_tclas cause checkpatch issue due to CamelCase naming. As none the member variables are used in code all have been changed on one patch. These changes are coding style in nature and should not impact runtime code execution. Signed-off-by:
-
John Whitmore authored
Whilst none of the structures inside the qos_tclas union are used, their names conflict with the coding standard being named in uppercase. The names of all five have been changed to lowercase. This is a style change, and since none of the structures are referenced, these changes should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the typedef from the union QOS_TCLAS, which causes a checkpatch issue with defining new types. In addition, as a type, the name should be in lowercase so has been changed. These are coding style changes and should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Multiple blank line, which cause an issue with checkpath, have been removed and the spacing of definitions have been aligned to look cleaner. These are coding style changes which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
The four register constants, 'Current_Tx_Rate_Reg', 'Initial_Tx_Rate_Reg', 'Tx_Retry_Count_Reg' and 'RegC38_TH' all cause checkpatch issue with CamelCase naming. The three have been renamed to 'CURRENT_TX_RATE_REG', 'INITIAL_TX_RATE_REG', 'TX_RETRY_COUNT_REG' and 'REG_C38_TH' respectively. These are coding style changes which should have no impact on runtime code execution. Signed-off-by:
-
