- 19 Oct, 2022 8 commits
-
-
David S. Miller authored
Zhengchao Shao says: ==================== net: fix null pointer access issue in qdisc These three patches fix the same type of problem. Set the default qdisc, and then construct an init failure scenario when the dev qdisc is configured on mqprio to trigger the reset process. NULL pointer access may occur during the reset process. --- v2: for fq_codel, revert the patch --- ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK> Fixes: e13e02a3 ("net_sched: SFB flow scheduler") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
Zhengchao Shao authored
This reverts commit 494f5063. When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be inited during mqprio_init(), fq_codel_reset() is invoked to clear resources. In this case, the flow is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() fq_codel_init() ... q->flows_cnt = 1024; ... q->flows = kvcalloc(...) --->failed, q->flows is NULL ... qdisc_put() ... fq_codel_reset() ... flow = q->flows + i --->q->flows is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fq_codel_reset+0x14d/0x350 Call Trace: <TASK> qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fd272b22d04 </TASK> Signed-off-by:
-
Zhengchao Shao authored
When the default qdisc is cake, if the qdisc of dev_queue fails to be inited during mqprio_init(), cake_reset() is invoked to clear resources. In this case, the tins is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() cake_init() q->tins = kvcalloc(...) --->failed, q->tins is NULL ... qdisc_put() ... cake_reset() ... cake_dequeue_one() b = &q->tins[...] --->q->tins is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:cake_dequeue_one+0xc9/0x3c0 Call Trace: <TASK> cake_reset+0xb1/0x140 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f89e5122d04 </TASK> Fixes: 046f6fd5 ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Manank Patel authored
fix rxsc and txsc not getting freed before going out of scope Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
Manank Patel <pmanank200502@gmail.com> Signed-off-by:
-
Brett Creeley authored
It's possible that the driver will dereference a qcq that doesn't exist when calling ionic_reconfigure_queues(), which causes a page fault BUG. If a reduction in the number of queues is followed by a different reconfig such as changing the ring size, the driver can hit a NULL pointer when trying to clean up non-existent queues. Fix this by checking to make sure both the qcqs array and qcq entry exists bofore trying to use and free the entry. Fixes: 101b40a0 ("ionic: change queue count with no reset") Signed-off-by:
Brett Creeley <brett@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.ioSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot got a crash [1] in skb_clone(), caused by a bug in hsr_get_untagged_frame(). When/if create_stripped_skb_hsr() returns NULL, we must not attempt to call skb_clone(). While we are at it, replace a WARN_ONCE() by netdev_warn_once(). [1] general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641 Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00 RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000 RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140 R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640 R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620 FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164 hsr_forward_do net/hsr/hsr_forward.c:461 [inline] hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623 hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69 __netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379 __netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599 netif_receive_skb_internal net/core/dev.c:5685 [inline] netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744 tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544 tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:584 ksys_write+0x127/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f266a683 ("net/hsr: Better frame dispatch") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.comSigned-off-by:
-
Vikas Gupta authored
Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
- 18 Oct, 2022 2 commits
-
-
Zhengchao Shao authored
If the initialization fails in calling addrconf_init_net(), devconf_all is the pointer that has been released. Then ip6mr_sk_done() is called to release the net, accessing devconf->mc_forwarding directly causes invalid pointer access. The process is as follows: setup_net() ops_init() addrconf_init_net() all = kmemdup(...) ---> alloc "all" ... net->ipv6.devconf_all = all; __addrconf_sysctl_register() ---> failed ... kfree(all); ---> ipv6.devconf_all invalid ... ops_exit_list() ... ip6mr_sk_done() devconf = net->ipv6.devconf_all; //devconf is invalid pointer if (!devconf || !atomic_read(&devconf->mc_forwarding)) The following is the Call Trace information: BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0 Read of size 4 at addr ffff888075508e88 by task ip/14554 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 kasan_check_range+0x35/0x1b0 ip6mr_sk_done+0x112/0x3a0 rawv6_close+0x48/0x70 inet_release+0x109/0x230 inet6_release+0x4c/0x70 sock_release+0x87/0x1b0 igmp6_net_exit+0x6b/0x170 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f7963322547 </TASK> Allocated by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc_node_track_caller+0x4a/0xb0 kmemdup+0x28/0x60 addrconf_init_net+0x1be/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 addrconf_init_net+0x623/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 7d9b1b57 ("ip6mr: fix use-after-free in ip6mr_sk_done()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Kuniyuki Iwashima authored
When we call connect() for a UDP socket in a reuseport group, we have to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel could select a unconnected socket wrongly for packets sent to the connected socket. However, the current way to set has_conns is illegal and possible to trigger that problem. reuseport_has_conns() changes has_conns under rcu_read_lock(), which upgrades the RCU reader to the updater. Then, it must do the update under the updater's lock, reuseport_lock, but it doesn't for now. For this reason, there is a race below where we fail to set has_conns resulting in the wrong socket selection. To avoid the race, let's split the reader and updater with proper locking. cpu1 cpu2 +----+ +----+ __ip[46]_datagram_connect() reuseport_grow() . . |- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size) | . | | |- rcu_read_lock() | |- reuse = rcu_dereference(sk->sk_reuseport_cb) | | | | | /* reuse->has_conns == 0 here */ | | |- more_reuse->has_conns = reuse->has_conns | |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */ | | | | | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb, | | | more_reuse) | `- rcu_read_unlock() `- kfree_rcu(reuse, rcu) | |- sk->sk_state = TCP_ESTABLISHED Note the likely(reuse) in reuseport_has_conns_set() is always true, but we put the test there for ease of review. [0] For the record, usually, sk_reuseport_cb is changed under lock_sock(). The only exception is reuseport_grow() & TCP reqsk migration case. 1) shutdown() TCP listener, which is moved into the latter part of reuse->socks[] to migrate reqsk. 2) New listen() overflows reuse->socks[] and call reuseport_grow(). 3) reuse->max_socks overflows u16 with the new listener. 4) reuseport_grow() pops the old shutdown()ed listener from the array and update its sk->sk_reuseport_cb as NULL without lock_sock(). shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(), but, reuseport_has_conns_set() is called only for UDP under lock_sock(), so likely(reuse) never be false in reuseport_has_conns_set(). [0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/ Fixes: acdcecc6 ("udp: correct reuseport selection with connected sockets") Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.comSigned-off-by:
-
- 17 Oct, 2022 5 commits
-
-
Jiapeng Chong authored
The function mtk_foe_entry_usable() is defined in the mtk_ppe.c file, but not called elsewhere, so delete this unused function. drivers/net/ethernet/mediatek/mtk_ppe.c:400:20: warning: unused function 'mtk_foe_entry_usable'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2409Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
David S. Miller authored
Yang Yingliang says: ==================== net: ethernet: mtk_eth_wed: fixe some leaks I found some leaks in mtk_eth_soc.c/mtk_wed.c. patch#1 - I found mtk_wed_exit() is never called, I think mtk_wed_exit() need be called in error path or module remove function to free the memory allocated in mtk_wed_add_hw(). patch#2 - The device is not put in error path in mtk_wed_add_hw(). patch#3 - The device_node pointer returned by of_parse_phandle() with refcount incremented, it should be decreased when it done. This patchset was just compiled tested because I don't have any HW on which to do the actual tests. ==================== Signed-off-by: -
Yang Yingliang authored
The device_node pointer returned by of_parse_phandle() with refcount incremented, when finish using it, the refcount need be decreased. Fixes: 804775df ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
After calling get_device() in mtk_wed_add_hw(), in error path, put_device() needs be called. Fixes: 804775df ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by:
-
Yang Yingliang authored
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called in error path or removing module to free the memory allocated in mtk_wed_add_hw(). Fixes: 804775df ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by:
-
- 16 Oct, 2022 1 commit
-
-
Eric Dumazet authored
syzbot found that alloc_sk_msg() could be called from a non sleepable context. sk_psock_verdict_recv() uses rcu_read_lock() protection. We need the callers to pass a gfp_t argument to avoid issues. syzbot report was: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 3613, name: syz-executor414 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 INFO: lockdep is turned off. CPU: 0 PID: 3613 Comm: syz-executor414 Not tainted 6.0.0-syzkaller-09589-g55be6084 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 __might_resched+0x538/0x6a0 kernel/sched/core.c:9877 might_alloc include/linux/sched/mm.h:274 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc_node mm/slub.c:3162 [inline] slab_alloc mm/slub.c:3256 [inline] kmem_cache_alloc_trace+0x59/0x310 mm/slub.c:3287 kmalloc include/linux/slab.h:600 [inline] kzalloc include/linux/slab.h:733 [inline] alloc_sk_msg net/core/skmsg.c:507 [inline] sk_psock_skb_ingress_self+0x5c/0x330 net/core/skmsg.c:600 sk_psock_verdict_apply+0x395/0x440 net/core/skmsg.c:1014 sk_psock_verdict_recv+0x34d/0x560 net/core/skmsg.c:1201 tcp_read_skb+0x4a1/0x790 net/ipv4/tcp.c:1770 tcp_rcv_established+0x129d/0x1a10 net/ipv4/tcp_input.c:5971 tcp_v4_do_rcv+0x479/0xac0 net/ipv4/tcp_ipv4.c:1681 sk_backlog_rcv include/net/sock.h:1109 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2906 release_sock+0x5d/0x1c0 net/core/sock.c:3462 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1483 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x46d/0x5f0 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 43312915 ("skmsg: Get rid of unncessary memset()") Reported-by:
-
- 15 Oct, 2022 11 commits
-
-
David S. Miller authored
Shenwei Wang says: ==================== net: phylink: add phylink_set_mac_pm() helper Per Russell's suggestion, the implementation is changed from the helper function to add an extra property in phylink_config structure because this change can easily cover SFP usecase too. Changes in v6: - update the fix tag hash and format Changes in v5: - Add fix tag in the commit message Changes in v4: - Clean up the codes in phylink.c - Continue the version number ==================== Signed-off-by: -
Shenwei Wang authored
Enable the mac_managed_pm configuration in the phylink_config structure to avoid the kernel warning during system resume. Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Shenwei Wang authored
The recent commit 'commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")' requires the MAC driver explicitly tell the phy driver who is managing the PM, otherwise you will see warning during resume stage. Add a boolean property in the phylink_config structure so that the MAC driver can use it to tell the PHY driver if it wants to manage the PM. Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Jakub Kicinski authored
This reverts commit 854701ba. We have more violations around, which leads to: WARNING: CPU: 2 PID: 1 at include/linux/cpumask.h:110 __netif_set_xps_queue+0x14e/0x770 Let's back this out and retry with a larger clean up in -next. Fixes: 854701ba ("net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}") Link: https://lore.kernel.org/all/20221014030459.3272206-2-guoren@kernel.org/Signed-off-by:
-
Dan Carpenter authored
Return zero if both dsa_slave_dev_check() and netdev_uses_dsa() are false. Fixes: acc43b7b ("net: dsa: allow masters to join a LAG") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "burst" string is only initialized for CONFIG_SPARC. It should be set to "64" because that's what is used by PCI. Fixes: 24cddbc3 ("sunhme: Combine continued messages") Signed-off-by:
Sean Anderson <seanga2@gmail.com> Signed-off-by:
-
Dan Carpenter authored
If smc_wr_alloc_lgr_mem() fails then return an error code. Don't return success. Fixes: 8799e310 ("net/smc: add v2 support to the work request layer") Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
-
Harini Katakam authored
When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154a ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by:
Harini Katakam <harini.katakam@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Cezar Bulinaru authored
memcpy: detected field-spanning write (size 168) of single field "(void *)&request->response_msg + (sizeof(struct rndis_message) - sizeof(union rndis_message_container)) + sizeof(*req_id)" at drivers/net/hyperv/rndis_filter.c:338 (size 40) RSP: 0018:ffffc90000144de0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881766b4000 RCX: 0000000000000000 RDX: 0000000000000102 RSI: 0000000000009ffb RDI: 00000000ffffffff RBP: ffffc90000144e38 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffc90000144c48 R11: ffffffff82f56ac8 R12: ffff8881766b403c R13: 00000000000000a8 R14: ffff888100b75000 R15: ffff888179301d00 FS: 0000000000000000(0000) GS:ffff8884d6280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f8b024c418 CR3: 0000000176548001 CR4: 00000000003706e0 Call Trace: <IRQ> ? _raw_spin_unlock_irqrestore+0x27/0x50 netvsc_poll+0x556/0x940 [hv_netvsc] __napi_poll+0x2e/0x170 net_rx_action+0x299/0x2f0 __do_softirq+0xed/0x2ef __irq_exit_rcu+0x9f/0x110 irq_exit_rcu+0xe/0x20 sysvec_hyperv_callback+0xb0/0xd0 </IRQ> <TASK> asm_sysvec_hyperv_callback+0x1b/0x20 RIP: 0010:native_safe_halt+0xb/0x10 Fixes: A warning triggered when the response message len exceeds the size of rndis_message. Inside the rndis_request structure these fields are however followed by a RNDIS_EXT_LEN padding so it is safe to use unsafe_memcpy. Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Cezar Bulinaru <cbulinaru@gmail.com> Signed-off-by:
-
Xiaobo Liu authored
Then the input contains '\0' or '\n', proc_mpc_write has read them, so the return value needs +1. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xiaobo Liu <cppcoffee@gmail.com> Signed-off-by:
-
Jonathan Cooper authored
Changing a VF's mac address through the VF (rather than via the PF) fails with EPERM because the latter part of efx_ef10_set_mac_address attempts to change the vport mac address list as the VF. Even with this fixed it still fails with EBUSY because the vadaptor is still assigned on the VF - the vadaptor reassignment must be within a section where the VF has torn down its state. A major reason this has broken is because we have two functions that ostensibly do the same thing - have a PF and VF cooperate to change a VF mac address. Rather than do this, if we are changing the mac of a VF that has a link to the PF in the same VM then simply call sriov_set_vf_mac instead, which is a proven working function that does that. If there is no PF available, or that fails non-fatally, then attempt to change the VF's mac address as we would a PF, without updating the PF's data. Test case: Create a VF: echo 1 > /sys/class/net/<if>/device/sriov_numvfs Set the mac address of the VF directly: ip link set <vf> addr 00:11:22:33:44:55 Set the MAC address of the VF via the PF: ip link set <pf> vf 0 mac 00:11:22:33:44:66 Without this patch the last command will fail with ENOENT. Signed-off-by:
Jonathan Cooper <jonathan.s.cooper@amd.com> Reported-by:
Íñigo Huguet <ihuguet@redhat.com> Fixes: 910c8789 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC") Acked-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
- 14 Oct, 2022 9 commits
-
-
Krzysztof Kozlowski authored
Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and driver. Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
git://githubhttps://github.comPalmer Dabbelt authored
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
-
zhangxiangqian authored
For FT2000+/64 devices, when four virtual machines share the same physical network interface, DROP will occur due to the single core CPU performance problem. ip_check_defrag and macvlan_process_broadcast is on the same CPU. When the MACVLAN PORT increases, the CPU usage reaches more than 90%. bc_queue > bc_queue_len_used (default 1000), causing DROP. Signed-off-by:
zhangxiangqian <zhangxiangqian@kylinos.cn> Signed-off-by:
-
Jakub Kicinski authored
TLS tries to get away with using the TCP input queue directly. This does not work if there is duplicated data (multiple skbs holding bytes for the same seq number range due to retransmits). Check for this condition and fall back to copy mode, it should be rare. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Signed-off-by:
-
Jan Sokolowski authored
During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b5 ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Christian Marangi authored
The switch sends autocast mib in little-endian. This is problematic for big-endian system as the values needs to be converted. Fix this by converting each mib value to cpu byte order. Fixes: 5c957c7c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet") Tested-by:
Pawel Dembicki <paweldembicki@gmail.com> Tested-by:
Lech Perczak <lech.perczak@gmail.com> Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
The header and the data of the skb for the inband mgmt requires to be in little-endian. This is problematic for big-endian system as the mgmt header is written in the cpu byte order. Fix this by converting each value for the mgmt header and data to little-endian, and convert to cpu byte order the mgmt header and data sent by the switch. Fixes: 5950c7c0 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Tested-by:
-
Alexander Potapenko authored
Use a 8-byte write to initialize sub.usr_handle in tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized when issuing setsockopt(..., SOL_TIPC, ...). This resulted in an infoleak reported by KMSAN when the packet was received: ===================================================== BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169 instrument_copy_to_user ./include/linux/instrumented.h:121 copyout+0xbc/0x100 lib/iov_iter.c:169 _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527 copy_to_iter ./include/linux/uio.h:176 simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527 skb_copy_datagram_msg ./include/linux/skbuff.h:3903 packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469 ____sys_recvmsg+0x2c4/0x810 net/socket.c:? ___sys_recvmsg+0x217/0x840 net/socket.c:2743 __sys_recvmsg net/socket.c:2773 __do_sys_recvmsg net/socket.c:2783 __se_sys_recvmsg net/socket.c:2780 __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 ... Uninit was stored to memory at: tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156 tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375 tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084 tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201 __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 __se_sys_setsockopt net/socket.c:2260 __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 Local variable sub created at: tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 Bytes 84-87 of 88 are uninitialized Memory access of size 88 starts at ffff88801ed57cd0 Data copied to user address 0000000020000400 ... ===================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Fixes: 026321c6 ("tipc: rename tipc_server to tipc_topsrv") Signed-off-by:
-
Mark Tomlinson authored
The trial period exists until jiffies is after addr_trial_end. But as jiffies will eventually overflow, just using time_after will eventually give incorrect results. As the node address is set once the trial period ends, this can be used to know that we are not in the trial period. Fixes: e415577f ("tipc: correct discovery message handling during address trial period") Signed-off-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by:
-
- 13 Oct, 2022 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: - Fix a regression in virtio pci on power - Add a reviewer for ifcvf * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/ifcvf: add reviewer virtio_pci: use irq to detect interrupt support
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Found that the synthetic events were using strlen/strscpy() on values that could have come from userspace, and that is bad. Consolidate the string logic of kprobe and eprobe and extend it to the synthetic events to safely process string addresses. - Clean up content of text dump in ftrace_bug() where the output does not make char reads into signed and sign extending the byte output. - Fix some kernel docs in the ring buffer code. * tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix reading strings from synthetic events tracing: Add "(fault)" name injection to kernel probes tracing: Move duplicate code of trace_kprobe/eprobe.c into header ring-buffer: Fix kernel-doc ftrace: Fix char print issue in print_ip_ins()
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - new driver for Exar/MaxLinear XR28V38x - support for exynosautov9 SoC - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC - support for imx93 - several other fixes and improvements * tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: twl4030_wdt: add missing mod_devicetable.h include dt-bindings: watchdog: migrate mt7621 text bindings to YAML watchdog: sp5100_tco: Add "action" module parameter watchdog: imx93: add watchdog timer on imx93 watchdog: imx7ulp_wdt: init wdog when it was active watchdog: imx7ulp_wdt: Handle wdog reconfigure failure watchdog: imx7ulp_wdt: Fix RCS timeout issue watchdog: imx7ulp_wdt: Check CMD32EN in wdog init watchdog: imx7ulp: Add explict memory barrier for unlock sequence watchdog: imx7ulp: Move suspend/resume to noirq phase watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt watchdog: s3c2410_wdt: support exynosautov9 watchdog dt-bindings: watchdog: add exynosautov9 compatible watchdog: npcm: Enable clock if provided watchdog: meson: keep running if already active watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema watchdog: armada_37xx_wdt: Fix .set_timeout callback watchdog: sa1100: make variable sa1100dog_driver static watchdog: w83977f_wdt: Fix comment typo ...
-
