- 22 Apr, 2022 8 commits
-
-
Jiri Slaby authored
Use list_for_each_entry() helper instead of explicit combo of list_for_each() and list_entry(). Note that pos is used as a reference point in list_add_tail() in icom_alloc_adapter(). This functionality remains as with an empty list, cur_adapter_entry->icom_adapter_entry is still the list head. This simplifies the code a bit. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421085808.24152-9-jslaby@suse.czSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
The baud rates are unsigned constants. So mark them as such. Not only it makes sense, but they are passed also to uart_get_baud_rate() and that expects unsigned int as baud rates on input. Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
There is no point keeping the header content separated. The header was not even protected against double inclusion. So move the content to the appropriate source file. Signed-off-by:
-
Jiri Slaby authored
There is a lot of sparse warnings: .../icom.c:228:30: warning: cast from restricted __le16 .../icom.c:232:66: warning: incorrect type in assignment (different base types) .../icom.c:232:66: expected unsigned int [usertype] leBuffer .../icom.c:232:66: got restricted __le32 [usertype] .../icom.c:237:30: warning: cast from restricted __le16 ... .../icom.c:1228:22: warning: cast from restricted __le16 And they are correct. So sort them all out by using proper __leXX and uXX types and the right direction of conversion: le16_to_cpu() instead of cpu_to_le16(), where appropriate. Signed-off-by:
-
Jiri Slaby authored
Integrate both the to_icom_adapter() macro and icom_kref_release() wrapper into icom_remove_adapter(). (And keep it icom_kref_release() name.) It makes the code easier to follow without complex indirections. Signed-off-by:
-
Jiri Slaby authored
In icom, there is an ICOM_PORT macro to perform upcasts from struct uart_port to struct icom_port. It's not completely safe and it works only because the first member of icom_port is uart_port. Nowadays, we use container_of for such an upcast instead. So introduce a helper (to_icom_port()) with container_of in it and convert all the ICOM_PORT users to the new helper. Apart from the code and type safety, it's also clear what icom_port (the variable) is. Unlike with the old ICOM_PORT (the macro with the cast). Signed-off-by:
-
Jiri Slaby authored
It's unused, so remove the macro. Signed-off-by:
-
- 21 Apr, 2022 1 commit
-
-
Randy Dunlap authored
The moxa-smartio.rst file was moved to a different location, so update the MAINTAINERS file entry for it. Quietens one build warning: MAINTAINERS:29715: WARNING: unknown document: ../driver-api/serial/moxa-smartio Fixes: 5b437ae9 ("Documentation: tty: move moxa-smartio.rst to tty") Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220420235545.17081-1-rdunlap@infradead.orgSigned-off-by:
-
- 20 Apr, 2022 4 commits
-
-
Daniel Starke authored
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the address field within the frame header. It is made up of the DLCI address, command/response (CR) bit and EA bit. Use the predefined CR value instead of a plain 2 in alignment to the remaining code and to make the encoding obvious. Signed-off-by:
Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220420101346.3315-3-daniel.starke@siemens.comSigned-off-by:
-
Daniel Starke authored
Remove commented out code as it is never used and if anyone accidentally turned it on, it would be broken. Signed-off-by:
-
Ilpo Järvinen authored
This partially reverts commit f6f58610. The code added by that commit containted math overflow for 32-bit archs. In addition, the approach used in it is unnecessarily complicated requiring a dedicated timer just for notemt. A simpler approach for providing UART_CAP_NOTEMT already exists (patches 1-2): https://lore.kernel.org/linux-serial/20220411083321.9131-3-ilpo.jarvinen@linux.intel.com/T/#u Thus, simply revert the UART_CAP_NOTEMT change for now. There were two driver changes within the patch series adding UART_CAP_NOTEMT taking advantage of the newly added flag. This does not revert the driver changes and therefore also UART_CAP_NOTEMT define has to remain. UART_CAP_NOTEMT remains no-op until support is again added. Fixes: f6f58610 ("serial: 8250: Handle UART without interrupt on TEMT using em485") Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/5f874142-fb1f-bff7-f33-fac823e65e2e@linux.intel.comSigned-off-by:
-
Jiri Slaby authored
The commit below causes the following warnings: Documentation/driver-api/index.rst:14: WARNING: toctree contains reference to nonexisting document 'driver-api/tty' Documentation/driver-api/tty/index.rst: WARNING: document isn't included in any toctree This is because I omitted the "/index" part from the link. That part is needed for directories and I was confused by the surrounding links which are links to files. Fix it in this patch. Fixes: b96cd8b0 ("Documentation: move tty to driver-api") Cc: Jonathan Corbet <corbet@lwn.net> Reported-by:
-
- 15 Apr, 2022 27 commits
-
-
Sherry Sun authored
Now fsl_lpuart driver use both of_alias_get_id() and ida_simple_get() in .probe(), which has the potential bug. For example, when remove the lpuart7 alias in dts, of_alias_get_id() will return error, then call ida_simple_get() to allocate the id 0 for lpuart7, this may confilct with the lpuart4 which has alias 0. aliases { ... serial0 = &lpuart4; serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; } So remove the ida_simple_get() in .probe(), return an error directly when calling of_alias_get_id() fails, which is consistent with other uart drivers behavior. Fixes: 3bc3206e ("serial: fsl_lpuart: Remove the alias node dependence") Signed-off-by:Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220321112211.8895-1-sherry.sun@nxp.comSigned-off-by:
-
Al Cooper authored
When flow control is enabled, the UART should set RTS to false during suspend to stop incoming data. Currently, the suspend routine sets the mctrl register in the uart to zero, but leaves the shadow version in the uart_port struct alone so that resume can restore it. This causes a problem later in suspend when serial8250_do_shutdown() is called which uses the shadow mctrl register to clear some additional bits but ends up restoring RTS. The solution is to clear RTS from the shadow version before serial8250_do_shutdown() is called and restore it after. Signed-off-by:
Al Cooper <alcooperx@comcast.net> Link: https://lore.kernel.org/r/20220324145620.41573-1-alcooperx@gmail.comSigned-off-by:
-
Eric Tremblay authored
Signed-off-by:
Eric Tremblay <etremblay@distech-controls.com> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220330104642.229507-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Eric Tremblay authored
The Freescale variant of the 16550A doesn't have an interrupt on TEMT available when using the FIFO mode. Signed-off-by:
-
Eric Tremblay authored
Introduce the UART_CAP_NOTEMT capability. The capability indicates that the UART doesn't have an interrupt available on TEMT. In the case where the device does not support it, we calculate the maximum time it could take for the transmitter to empty the shift register. When we get in the situation where we get the THRE interrupt, we check if the TEMT bit is set. If it's not, we start the a timer and recall __stop_tx() after the delay. The transmit sequence is a bit modified when the capability is set. The new timer is used between the last interrupt(THRE) and a potential stop_tx timer. Signed-off-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> [moved to use added UART_CAP_TEMT] Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> [moved to use added UART_CAP_NOTEMT, improve timeout] Signed-off-by:
-
Miaoqian Lin authored
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference. Fixes: 54da3e38 ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220404143842.16960-1-linmq006@gmail.comSigned-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment from the drivers rs485_config() function to avoid redundancy. Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.deSigned-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already ensures that only one of both options RTS on send or RTS after send is set. It also assigns the passed serial_rs485 struct to the uart port. So remove the check and the assignment from the drivers rs485_config() function to avoid redundancy. Signed-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment in the drivers rs485_config() function to avoid reduncancy. Acked-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already nullifies the padding field of the passed serial_rs485 struct before returning it to userspace. Doing the same in the drivers rs485_config() function is redundant, so remove the concerning memset in this function. Signed-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already clamps the RTS delays. It also assigns the passed serial_rs485 struct to the uart port. So remove these tasks from the drivers rs485_config() function to avoid redundancy. Signed-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already ensures that only one of both options RTS on send or RTS after send is set. So remove this check from the drivers rs485_config() function to avoid redundancy. Signed-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already ensures that only one of both options RTS on send or RTS after send is set. It also assigns the passed serial_rs485 struct to the uart port. So remove the check and the assignment from the drivers rs485_config() function to avoid redundancy. Signed-off-by:
-
Lino Sanfilippo authored
In uart_set_rs485_config() the serial core already - ensures that only one of both options RTS on send or RTS after send is set - nullifies the padding field of the passed serial_rs485 struct - clamps the RTS delays - assigns the passed serial_rs485 struct to the uart port So remove these tasks from the code of the drivers rs485_config() function to avoid redundancy. Signed-off-by:
-
Lino Sanfilippo authored
Several drivers that support setting the RS485 configuration via userspace implement one or more of the following tasks: - in case of an invalid RTS configuration (both RTS after send and RTS on send set or both unset) fall back to enable RTS on send and disable RTS after send - nullify the padding field of the returned serial_rs485 struct - copy the configuration into the uart port struct - limit RTS delays to 100 ms Move these tasks into the serial core to make them generic and to provide a consistent behaviour among all drivers. Signed-off-by:
-
Yu Tu authored
Due to chip process differences, chip designers recommend using baud rates as close to and larger as possible in order to reduce clock errors. Signed-off-by:
Yu Tu <yu.tu@amlogic.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220407081355.13602-2-yu.tu@amlogic.comSigned-off-by:
-
Kuldeep Singh authored
Similar to I2C controller, move geni based QUP UART controller binding out from parent schema to an individual binding and let parent refer to child schema later on. UART binding also stand incomplete right now similar to I2C, complete it along this process. Signed-off-by:
Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220404182938.29492-4-singh.kuldeep87k@gmail.comSigned-off-by:
-
Maciej W. Rozycki authored
Provide information in the kernel log as to what configuration option to enable for PCI UART devices that have been blacklisted in the generic PCI 8250 UART driver and which have a dedicated driver available to handle that has been disabled. The rationale is there is no easy way for the user to map a specific PCI vendor:device pair to an individual dedicated driver while the generic driver has this information readily available and it will likely be confusing that the generic driver does not register such a port. This is unlike usual drivers, such as drivers/net/ethernet/3com/3c59x.c which handles all the hardware family members regardless of differences between them, and following an existing example where a serio driver provides suggestions as to the correct configuration options to use: psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. A message is then printed like: serial 0000:04:00.3: ignoring port, enable SERIAL_8250_PERICOM to handle when an affected device is encountered and the generic driver rejects it. Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310054120.44113@angie.orcam.me.ukSigned-off-by:
-
Daniel Gibson authored
TTYs in ICANON mode have a special case that allows "pushing" a line without a regular EOL character (like newline), by using EOF (the EOT character - ASCII 0x4) as a pseudo-EOL. It is silently discarded, so the reader of the PTS will receive the line *without* EOF or any other terminating character. This special case has an edge case: What happens if the readers buffer is the same size as the line (without EOF)? Will they be able to tell if the whole line is received, i.e. if the next read() will return more of the same line or the next line? There are two possibilities, that both have (dis)advantages: 1. The next read() returns 0. FreeBSD (13.0) and OSX (10.11) do this. Advantage: The reader can interpret this as "the line is over". Disadvantage: read() returning 0 means EOF, the reader could also interpret it as "there's no more data" and stop reading or even close the PT. 2. The next read() returns the next line, the EOF is silently discarded. Solaris (or at least OpenIndiana 2021.10) does this, Linux has done do this since commit 40d5e090 ("n_tty: Fix EOF push handling"); this behavior was recently broken by commit 35930307 ("tty: n_tty: do not look ahead for EOL character past the end of the buffer"). Advantage: read() won't return 0 (EOF), reader less likely to be confused (and things like `while(read(..)>0)` don't break) Disadvantage: The reader can't really know if the read() continues the last line (that filled the whole read buffer) or starts a new line. As both options are defensible (and are used by other Unix-likes), it's best to stick to the "old" behavior since "n_tty: Fix EOF push handling" of 2013, i.e. silently discard that EOF. This patch - that I actually got from Linus for testing and only modified slightly - restores that behavior by skipping an EOF character if it's the next character after reading is done. Based on a patch from Linus Torvalds. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611 Fixes: 35930307 ("tty: n_tty: do not look ahead for EOL character past the end of the buffer") Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Reviewed-and-tested-by:
Daniel Gibson <daniel@gibson.sh> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Phil Edworthy authored
This is needed for the Renesas RZ/V2M (r9a09g011) SoC. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220330154024.112270-6-phil.edworthy@renesas.comSigned-off-by:
-
Phil Edworthy authored
The Renesas RZ/V2M (r9a09g011) SoC uses a uart that is compatible with the EMMA Mobile SoC. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Peng Fan authored
The lpuart on i.MX93 is derived from i.MX7ULP with some industrial enhancements, it uses two compatible strings, so update the compatible string for i.MX93. Acked-by:
Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220323093659.1722463-1-peng.fan@oss.nxp.comSigned-off-by:
-
Kunihiko Hayashi authored
UniPhier UART controller has a reset lines from system controller. Add "resets" property to fix the following warning. uniphier-ld11-global.dtb: serial@54006800: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml Reviewed-by:Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1648617338-8600-3-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by:
-
Kunihiko Hayashi authored
'maxItems' is preferred for a single entry, not 'minItems'. Reviewed-by:
-
Miaoqian Lin authored
Fix the missing clk_disable_unprepare() before return from owl_uart_probe() in the error handling case. Fixes: abf42d2f ("tty: serial: owl: add "much needed" clk_prepare_enable()") Signed-off-by:
-
Jaewon Kim authored
The console_write and IRQ handler can run concurrently. Problems may occurs console_write is continuously executed while the IRQ handler is running. Reviewed-by:
Jaewon Kim <jaewon02.kim@samsung.com> Link: https://lore.kernel.org/r/20220407071619.102249-2-jaewon02.kim@samsung.comSigned-off-by:
-
Huang Guobin authored
When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated. Reviewed-by:
Huang Guobin <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.comSigned-off-by:
-
