- 31 Jul, 2014 15 commits
-
-
Hans de Goede authored
commit e76aed9d upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1114768Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit 69461747 upstream. The patch 3e374919 is supposed to fix the problem where kmem_cache_create incorrectly reports duplicate cache name and fails. The problem is described in the header of that patch. However, the patch doesn't really fix the problem because of these reasons: * the logic to test for debugging is reversed. It was intended to perform the check only if slub debugging is enabled (which implies that caches with the same parameters are not merged). Therefore, there should be #if !defined(CONFIG_SLUB) || defined(CONFIG_SLUB_DEBUG_ON) The current code has the condition reversed and performs the test if debugging is disabled. * slub debugging may be enabled or disabled based on kernel command line, CONFIG_SLUB_DEBUG_ON is just the default settings. Therefore the test based on definition of CONFIG_SLUB_DEBUG_ON is unreliable. This patch fixes the problem by removing the test "!defined(CONFIG_SLUB_DEBUG_ON)". Therefore, duplicate names are never checked if the SLUB allocator is used. Note to stable kernel maintainers: when backporint this patch, please backport also the patch 3e374919. Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Tony Luck authored
commit 58d4e21e upstream. The "uptime" trace clock added in: commit 8aacf017 tracing: Add "uptime" trace clock that uses jiffies has wraparound problems when the system has been up more than 1 hour 11 minutes and 34 seconds. It converts jiffies to nanoseconds using: (u64)jiffies_to_usecs(jiffy) * 1000ULL but since jiffies_to_usecs() only returns a 32-bit value, it truncates at 2^32 microseconds. An additional problem on 32-bit systems is that the argument is "unsigned long", so fixing the return value only helps until 2^32 jiffies (49.7 days on a HZ=1000 system). Avoid these problems by using jiffies_64 as our basis, and not converting to nanoseconds (we do convert to clock_t because user facing API must not be dependent on internal kernel HZ values). Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com Fixes: 8aacf017 "tracing: Add "uptime" trace clock that uses jiffies" Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Tejun Heo authored
commit 0b462c89 upstream. While a queue is being destroyed, all the blkgs are destroyed and its ->root_blkg pointer is set to NULL. If someone else starts to drain while the queue is in this state, the following oops happens. NULL pointer dereference at 0000000000000028 IP: [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 PGD e4a1067 PUD b773067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: cfq_iosched(-) [last unloaded: cfq_iosched] CPU: 1 PID: 537 Comm: bash Not tainted 3.16.0-rc3-work+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88000e222250 ti: ffff88000efd4000 task.ti: ffff88000efd4000 RIP: 0010:[<ffffffff8144e944>] [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 RSP: 0018:ffff88000efd7bf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff880015091450 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88000efd7c10 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88000e222250 R11: 0000000000000000 R12: ffff880015091450 R13: ffff880015092e00 R14: ffff880015091d70 R15: ffff88001508fc28 FS: 00007f1332650740(0000) GS:ffff88001fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000009446000 CR4: 00000000000006e0 Stack: ffffffff8144e8f6 ffff880015091450 0000000000000000 ffff880015091d80 ffff88000efd7c28 ffffffff8144ae2f ffff880015091450 ffff88000efd7c58 ffffffff81427641 ffff880015091450 ffffffff82401f00 ffff880015091450 Call Trace: [<ffffffff8144ae2f>] blkcg_drain_queue+0x1f/0x60 [<ffffffff81427641>] __blk_drain_queue+0x71/0x180 [<ffffffff81429b3e>] blk_queue_bypass_start+0x6e/0xb0 [<ffffffff814498b8>] blkcg_deactivate_policy+0x38/0x120 [<ffffffff8144ec44>] blk_throtl_exit+0x34/0x50 [<ffffffff8144aea5>] blkcg_exit_queue+0x35/0x40 [<ffffffff8142d476>] blk_release_queue+0x26/0xd0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff81427505>] blk_put_queue+0x15/0x20 [<ffffffff817d07bb>] scsi_device_dev_release_usercontext+0x16b/0x1c0 [<ffffffff810bc339>] execute_in_process_context+0x89/0xa0 [<ffffffff817d064c>] scsi_device_dev_release+0x1c/0x20 [<ffffffff817930e2>] device_release+0x32/0xa0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff817934d7>] put_device+0x17/0x20 [<ffffffff817d11b9>] __scsi_remove_device+0xa9/0xe0 [<ffffffff817d121b>] scsi_remove_device+0x2b/0x40 [<ffffffff817d1257>] sdev_store_delete+0x27/0x30 [<ffffffff81792ca8>] dev_attr_store+0x18/0x30 [<ffffffff8126f75e>] sysfs_kf_write+0x3e/0x50 [<ffffffff8126ea87>] kernfs_fop_write+0xe7/0x170 [<ffffffff811f5e9f>] vfs_write+0xaf/0x1d0 [<ffffffff811f69bd>] SyS_write+0x4d/0xc0 [<ffffffff81d24692>] system_call_fastpath+0x16/0x1b 776687bc ("block, blk-mq: draining can't be skipped even if bypass_depth was non-zero") made it easier to trigger this bug by making blk_queue_bypass_start() drain even when it loses the first bypass test to blk_cleanup_queue(); however, the bug has always been there even before the commit as blk_queue_bypass_start() could race against queue destruction, win the initial bypass test but perform the actual draining after blk_cleanup_queue() already destroyed all blkgs. Fix it by skippping calling into policy draining if all the blkgs are already gone. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Shirish Pargaonkar <spargaonkar@suse.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Reported-by:
Jet Chen <jet.chen@intel.com> Tested-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Romain Degez authored
commit b32bfc06 upstream. Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by:
Romain Degez <romain.degez@gmail.com> Tested-by:
-
Martin Schwidefsky authored
commit dab6cf55 upstream. The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. The PSW_MASK_USER define contains the PSW_MASK_ASC bits, the ptrace interface accepts all combinations for the address-space-control bits. To protect the kernel space the PSW mask check in ptrace needs to reject the address-space-control bit combination for home space. Fixes CVE-2014-3534 Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Tejun Heo authored
commit 1a112d10 upstream. 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") directly used ata_port->scsi_host->can_queue from ata_qc_new() to determine the number of tags supported by the host; unfortunately, SAS controllers doing SATA don't initialize ->scsi_host leading to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 PGD 0 Oops: 0002 [#1] SMP Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000 RIP: 0010:[<ffffffff814e0618>] [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 RSP: 0018:ffff88061a003ae8 EFLAGS: 00010012 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000 FS: 00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0 Stack: ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200 ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68 ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80 Call Trace: [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430 [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas] [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300 [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550 [<ffffffff81317613>] __blk_run_queue+0x33/0x40 [<ffffffff8131781a>] queue_unplugged+0x2a/0x90 [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210 [<ffffffff8131d274>] blk_finish_plug+0x14/0x50 [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0 [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50 [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50 [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0 [<ffffffff81219897>] blkdev_read_iter+0x37/0x40 [<ffffffff811e307e>] new_sync_read+0x7e/0xb0 [<ffffffff811e3734>] vfs_read+0x94/0x170 [<ffffffff811e43c6>] SyS_read+0x46/0xb0 [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0 [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00 Fix it by introducing ata_host->n_tags which is initialized to ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to scsi_host_template->can_queue in ata_host_register() for !SAS ones. As SAS hosts are never registered, this will give them the same ATA_MAX_QUEUE - 1 as before. Note that we can't use scsi_host->can_queue directly for SAS hosts anyway as they can go higher than the libata maximum. Signed-off-by:
Mike Qiu <qiudayu@linux.vnet.ibm.com> Reported-by:
Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by:
Peter Hurley <peter@hurleysoftware.com> Reported-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Fixes: 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") Cc: Kevin Hao <haokexin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Kevin Hao authored
commit 1871ee13 upstream. The sata on fsl mpc8315e is broken after the commit 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers"). The reason is that the ata controller on this SoC only implement a queue depth of 16. When issuing the commands in tag order, all the commands in tag 16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata malfunction. It makes no senses to use a 32 queue in software while the hardware has less queue depth. So consider the queue depth implemented by the hardware when requesting a command tag. Fixes: 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Christoph Hellwig authored
commit d45b3279 upstream. There is no inherent reason why the last put of a tag structure must be the one for the Scsi_Host, as device model objects can be held for arbitrary periods. Merge blk_free_tags and __blk_free_tags into a single funtion that just release a references and get rid of the BUG() when the host reference wasn't the last. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mikulas Patocka authored
commit 3b3a1814 upstream. This patch provides the compat BLKZEROOUT ioctl. The argument is a pointer to two uint64_t values, so there is no need to translate it. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
commit 74adf83f upstream. The big ACL switched nfs to use generic_listxattr, which calls all existing ->list handlers. Add a custom .listxattr implementation that only lists the ACLs if they actually are present on the given inode. Signed-off-by:
Philippe Troin <phil@fifi.org> Tested-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Antti Palosaari authored
commit db4175ae upstream. Only supported modulation for DVB-S is QPSK. Modulation parameter contains invalid value for DVB-S on some cases, which leads driver refusing tuning attempt. Due to that, hard code modulation to QPSK in case of DVB-S. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit 3445857b upstream. When the audio encoding is changed the driver calls hdpvr_set_audio with the current opt->audio_input value. However, that should have been opt->audio_input + 1. So changing the audio encoding inadvertently changes the input as well. This bug has always been there. The second bug was introduced in kernel 3.10 and that broke the default_audio_input module option handling: the audio encoding was never switched to AC3 if default_audio_input was set to 2 (SPDIF input). In addition, since starting with 3.10 the audio encoding is always set at the start the first bug now always happens when the driver is loaded. In the past this bug would only surface if the user would change the audio encoding after the driver was loaded. Also fixes a small trivial typo (bufffer -> buffer). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reported-by:
Scott Doty <scott@corp.sonic.net> Signed-off-by:
-
Rickard Strandqvist authored
commit f71920ef upstream. Wrong value used in same cases for the aspect ratio. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4856fbd1 upstream. The OMAP4 camera support depends on I2C and VIDEO_V4L2, both of which can be loadable modules. This causes build failures if we want the camera driver to be built-in. This can be solved by turning the option into "tristate", which unfortunately causes another problem, because the driver incorrectly calls a platform-internal interface for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. Instead, this patch just forbids the invalid configurations and ensures that the driver can only be built if all its dependencies are built-in. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 28 Jul, 2014 25 commits
-
-
Greg Kroah-Hartman authored
-
Anton Kolesov authored
commit a4b6cb73 upstream. This patch adds implementation of GET_THREAD_AREA ptrace request type. This is required by GDB to debug NPTL applications. Signed-off-by:
Anton Kolesov <Anton.Kolesov@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Linus Torvalds authored
commit b738d764 upstream. shrink_inactive_list() used to wait 0.1s to avoid congestion when all the pages that were isolated from the inactive list were dirty but not under active writeback. That makes no real sense, and apparently causes major interactivity issues under some loads since 3.11. The ostensible reason for it was to wait for kswapd to start writing pages, but that seems questionable as well, since the congestion wait code seems to trigger for kswapd itself as well. Also, the logic behind delaying anything when we haven't actually started writeback is not clear - it only delays actually starting that writeback. We'll still trigger the congestion waiting if (a) the process is kswapd, and we hit pages flagged for immediate reclaim (b) the process is not kswapd, and the zone backing dev writeback is actually congested. This probably needs to be revisited, but as it is this fixes a reported regression. Reported-by:
Felipe Contreras <felipe.contreras@gmail.com> Pinpointed-by:
Hillf Danton <dhillf@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Emmanuel Grumbach authored
commit dc271ee0 upstream. Firmware folks seem say that this flag can make trouble. Drop it. The advantage of CTS to self is that it slightly reduces the cost of the protection, but make the protection less reliable. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Marek Vasut authored
commit 22970070 upstream. Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Benjamin LaHaise authored
commit 263782c1 upstream. As of commit f8567a38 it is now possible to have put_reqs_available() called from irq context. While put_reqs_available() is per cpu, it did not protect itself from interrupts on the same CPU. This lead to aio_complete() corrupting the available io requests count when run under a heavy O_DIRECT workloads as reported by Robert Elliott. Fix this by disabling irq updates around the per cpu batch updates of reqs_available. Many thanks to Robert and folks for testing and tracking this down. Reported-by:
Robert Elliot <Elliott@hp.com> Tested-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Mateusz Guzik authored
commit b0ab99e7 upstream. proc_sched_show_task() does: if (nr_switches) do_div(avg_atom, nr_switches); nr_switches is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero on e.g. x86-64 and be truncated to zero for division. Fix the problem by using div64_ul() instead. As a side effect calculations of avg_atom for big nr_switches are now correct. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 4badad35 upstream. The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by:
-
Takashi Iwai authored
commit 4320f6b1 upstream. The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc037 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mike Snitzer authored
commit 048e5a07 upstream. The block size for the dm-cache's data device must remained fixed for the life of the cache. Disallow any attempt to change the cache's data block size. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 9aec8629 upstream. The block size for the thin-pool's data device must remained fixed for the life of the thin-pool. Disallow any attempt to change the thin-pool's data block size. It should be noted that attempting to change the data block size via thin-pool table reload will be ignored as a side-effect of the thin-pool handover that the thin-pool target does during thin-pool table reload. Here is an example outcome of attempting to load a thin-pool table that reduced the thin-pool's data block size from 1024K to 512K. Before: kernel: device-mapper: thin: 253:4: growing the data device from 204800 to 409600 blocks After: kernel: device-mapper: thin metadata: changing the data block size (from 2048 to 1024) is not supported kernel: device-mapper: table: 253:4: thin-pool: Error creating metadata object kernel: device-mapper: ioctl: error adding target to table Signed-off-by:
-
Ted Juan authored
commit 6938ad40 upstream. These two function's switch case lack the 'break' that make them always return error. Signed-off-by:
Ted Juan <ted.juan@gmail.com> Acked-by:
Pekon Gupta <pekon@ti.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
commit 3896c329 upstream. Mauro reported that his AMD X2 using the powernow-k8 cpufreq driver locked up when doing cpu hotplug. Because we called set_cyc2ns_scale() from the time_cpufreq_notifier() unconditionally, it gets called multiple times for each freq change, instead of only the once, when the tsc_khz value actually changes. Because it gets called more than once, we run out of cyc2ns data slots and stall, waiting for a free one, but because we're half way offline, there's no consumers to free slots. By placing the call inside the condition that actually changes tsc_khz we avoid superfluous calls and avoid the problem. Reported-by:
Mauro <registosites@hotmail.com> Tested-by:
-
John Stultz authored
commit 16927776 upstream. Sharvil noticed with the posix timer_settime interface, using the CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users tried to specify a relative time timer, it would incorrectly be treated as absolute regardless of the state of the flags argument. This patch corrects this, properly checking the absolute/relative flag, as well as adds further error checking that no invalid flag bits are set. Reported-by:
Sharvil Nanavati <sharvil@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Link: http://lkml.kernel.org/r/1404767171-6902-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
commit 0ac66eff upstream. In some cases we fetch the edid in the detect() callback in order to determine what sort of monitor is connected. If that happens, don't fetch the edid again in the get_modes() callback or we will leak the edid. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jason Wang authored
commit fbb60fe3 upstream. Return IRQ_NONE if it was not our irq. This is necessary for the case when qxl is sharing irq line with a device A in a crash kernel. If qxl is initialized before A and A's irq was raised during this gap, returning IRQ_HANDLED in this case will cause this irq to be raised again after EOI since kernel think it was handled but in fact it was not. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 201bb624 upstream. If the value in the scratch register is 0, set it to the max level. This fixes an issue where the console fb blanking code calls back into the backlight driver on unblank and then sets the backlight level to 0 after the driver has already set the mode and enabled the backlight. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=81382 https://bugs.freedesktop.org/show_bug.cgi?id=70207Signed-off-by:
David Heidelberger <david.heidelberger@ixit.cz> Signed-off-by:
-
Tomasz Figa authored
commit 29e697b1 upstream. Certain GIC implementation, namely those found on earlier, single cluster, Exynos SoCs, have registers mapped without per-CPU banking, which means that the driver needs to use different offset for each CPU. Currently the driver calculates the offset by multiplying value returned by cpu_logical_map() by CPU offset parsed from DT. This is correct when CPU topology is not specified in DT and aforementioned function returns core ID alone. However when DT contains CPU topology, the function changes to return cluster ID as well, which is non-zero on mentioned SoCs and so breaks the calculation in GIC driver. This patch fixes this by masking out cluster ID in CPU offset calculation so that only core ID is considered. Multi-cluster Exynos SoCs already have banked GIC implementations, so this simple fix should be enough. Reported-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Fixes: db0d4db2 ("ARM: gic: allow GIC to support non-banked setups") Link: https://lkml.kernel.org/r/1405610624-18722-1-git-send-email-t.figa@samsung.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Suravee Suthikulpanit authored
commit 144cb088 upstream. Commit 3ab72f91 "dt-bindings: add GIC-400 binding" added the "arm,gic-400" compatible string, but the corresponding IRQCHIP_DECLARE was never added to the gic driver. Therefore add the missing irqchip declaration for it. Signed-off-by:
Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
Will Deacon <will.deacon@arm.com> Fixes: 3ab72f91 ("dt-bindings: add GIC-400 binding") Link: https://lkml.kernel.org/r/2621565.f5eISveXXJ@diegoSigned-off-by:
-
Matthias Brugger authored
commit a97e8027 upstream. Patch 0a68214b "ARM: DT: Add binding for GIC virtualization extentions (VGIC)" added the "arm,cortex-a7-gic" compatible string, but the corresponding IRQCHIP_DECLARE was never added to the gic driver. To let real Cortex-A7 SoCs use it, add the necessary declaration to the device driver. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Link: https://lkml.kernel.org/r/1404388732-28890-1-git-send-email-matthias.bgg@gmail.com Fixes: 0a68214b ("ARM: DT: Add binding for GIC virtualization extentions (VGIC)") Signed-off-by:
-
Martin Lau authored
commit 97b8ee84 upstream. ring_buffer_poll_wait() should always put the poll_table to its wait_queue even there is immediate data available. Otherwise, the following epoll and read sequence will eventually hang forever: 1. Put some data to make the trace_pipe ring_buffer read ready first 2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee) 3. epoll_wait() 4. read(trace_pipe_fd) till EAGAIN 5. Add some more data to the trace_pipe ring_buffer 6. epoll_wait() -> this epoll_wait() will block forever ~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2, ring_buffer_poll_wait() returns immediately without adding poll_table, which has poll_table->_qproc pointing to ep_poll_callback(), to its wait_queue. ~ During the epoll_wait() call in step 3 and step 6, ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue because the poll_table->_qproc is NULL and it is how epoll works. ~ When there is new data available in step 6, ring_buffer does not know it has to call ep_poll_callback() because it is not in its wait queue. Hence, block forever. Other poll implementation seems to call poll_wait() unconditionally as the very first thing to do. For example, tcp_poll() in tcp.c. Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com Fixes: 2a2cc8f7 "ftrace: allow the event pipe to be polled" Reviewed-by:
Chris Mason <clm@fb.com> Signed-off-by:
Martin Lau <kafai@fb.com> Signed-off-by:
-
Amitkumar Karwar authored
commit d76744a9 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by:
Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by:
Linus Gasser <list@markas-al-nour.org> Reported-by:
Michael Hirsch <hirsch@teufel.de> Tested-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
HATAYAMA Daisuke authored
commit b292d7a1 upstream. Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by:
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 1f9a7268 upstream. The context check in perf_event_context_sched_out allows non-cloned context to be part of the optimized schedule out switch. This could move non-cloned context into another workload child. Once this child exits, the context is closed and leaves all original (parent) events in closed state. Any other new cloned event will have closed state and not measure anything. And probably causing other odd bugs. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10ec9472 ] There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
