If we do an append write to a file (which increases its inode's i_size)
that does not have the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode,
and the previous transaction added a new hard link to the file, which sets
the flag BTRFS_INODE_COPY_EVERYTHING in the file's inode, and then fsync
the file, the inode's new i_size isn't logged. This has the consequence
that after the fsync log is replayed, the file size remains what it was
before the append write operation, which means users/applications will
not be able to read the data that was successsfully fsync'ed before.

This happens because neither the inode item nor the delayed inode get
their i_size updated when the append write is made - doing so would
require starting a transaction in the buffered write path, something that
we do not do intentionally for performance reasons.

Fix this by making sure that when the flag BTRFS_INODE_COPY_EVERYTHING is
set the inode is logged with its current i_size (log the in-memory inode
into the log tree).

This issue is not a recent regression and is easy to reproduce with the
following test case for fstests:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"

  here=`pwd`
  tmp=/tmp/$$
  status=1	# failure is the default!

  _cleanup()
  {
          _cleanup_flakey
          rm -f $tmp.*
  }
  trap "_cleanup; exit \$status" 0 1 2 3 15

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _supported_fs generic
  _supported_os Linux
  _need_to_be_root
  _require_scratch
  _require_dm_flakey
  _require_metadata_journaling $SCRATCH_DEV

  _crash_and_mount()
  {
          # Simulate a crash/power loss.
          _load_flakey_table $FLAKEY_DROP_WRITES
          _unmount_flakey
          # Allow writes again and mount. This makes the fs replay its fsync log.
          _load_flakey_table $FLAKEY_ALLOW_WRITES
          _mount_flakey
  }

  rm -f $seqres.full

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create the test file with some initial data and then fsync it.
  # The fsync here is only needed to trigger the issue in btrfs, as it causes the
  # the flag BTRFS_INODE_NEEDS_FULL_SYNC to be removed from the btrfs inode.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" \
                  -c "fsync" \
                  $SCRATCH_MNT/foo | _filter_xfs_io
  sync

  # Add a hard link to our file.
  # On btrfs this sets the flag BTRFS_INODE_COPY_EVERYTHING on the btrfs inode,
  # which is a necessary condition to trigger the issue.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/bar

  # Sync the filesystem to force a commit of the current btrfs transaction, this
  # is a necessary condition to trigger the bug on btrfs.
  sync

  # Now append more data to our file, increasing its size, and fsync the file.
  # In btrfs because the inode flag BTRFS_INODE_COPY_EVERYTHING was set and the
  # write path did not update the inode item in the btree nor the delayed inode
  # item (in memory struture) in the current transaction (created by the fsync
  # handler), the fsync did not record the inode's new i_size in the fsync
  # log/journal. This made the data unavailable after the fsync log/journal is
  # replayed.
  $XFS_IO_PROG -c "pwrite -S 0xbb 32K 32K" \
               -c "fsync" \
               $SCRATCH_MNT/foo | _filter_xfs_io

  echo "File content after fsync and before crash:"
  od -t x1 $SCRATCH_MNT/foo

  _crash_and_mount

  echo "File content after crash and log replay:"
  od -t x1 $SCRATCH_MNT/foo

  status=0
  exit

The expected file output before and after the crash/power failure expects the
appended data to be available, which is:

  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0100000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0200000

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Often when running fstests btrfs/079 I was running into the following
trace during umount on one of my qemu/kvm test vms:

[ 8245.682441] WARNING: CPU: 8 PID: 25064 at fs/btrfs/extent-tree.c:138 btrfs_put_block_group+0x51/0x69 [btrfs]()
[ 8245.685039] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
[ 8245.693860] CPU: 8 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[ 8245.695081] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[ 8245.697583]  0000000000000009 ffff88020d047ce8 ffffffff8145eec7 ffffffff81095dce
[ 8245.699234]  0000000000000000 ffff88020d047d28 ffffffff8104b399 0000000000000028
[ 8245.700995]  ffffffffa04db07b ffff8801c6036c00 ffff8801c6036d68 ffff880202eb40b0
[ 8245.702510] Call Trace:
[ 8245.703006]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
[ 8245.705393]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
[ 8245.706569]  [<ffffffff8104b399>] warn_slowpath_common+0xa1/0xbb
[ 8245.707747]  [<ffffffffa04db07b>] ? btrfs_put_block_group+0x51/0x69 [btrfs]
[ 8245.709101]  [<ffffffff8104b456>] warn_slowpath_null+0x1a/0x1c
[ 8245.710274]  [<ffffffffa04db07b>] btrfs_put_block_group+0x51/0x69 [btrfs]
[ 8245.711823]  [<ffffffffa04e3473>] btrfs_free_block_groups+0x145/0x322 [btrfs]
[ 8245.713251]  [<ffffffffa04ef31a>] close_ctree+0x1ef/0x325 [btrfs]
[ 8245.714448]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
[ 8245.715539]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
[ 8245.716835]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
[ 8245.718015]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
[ 8245.719101]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 8245.720316]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
[ 8245.721517]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
[ 8245.722581]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
[ 8245.723538]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
[ 8245.724572]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
[ 8245.725598]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
[ 8245.726892]  [<ffffffff814651ac>] int_signal+0x12/0x17
[ 8245.737887] ---[ end trace a01d038397e99b92 ]---
[ 8245.769363] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 8245.770737] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
[ 8245.772641] CPU: 2 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[ 8245.772641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[ 8245.772641] task: ffff880013005810 ti: ffff88020d044000 task.ti: ffff88020d044000
[ 8245.772641] RIP: 0010:[<ffffffffa051c8e6>]  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
[ 8245.772641] RSP: 0018:ffff88020d0478b8  EFLAGS: 00010202
[ 8245.772641] RAX: 0000000000000004 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffffa0581488
[ 8245.772641] RDX: 0000000000000000 RSI: ffff880194b7bf48 RDI: ffff880144b6a7a0
[ 8245.772641] RBP: ffff88020d0478d8 R08: 0000000000000000 R09: 000000000000ffff
[ 8245.772641] R10: 0000000000000004 R11: 0000000000000005 R12: ffff880194b7bf48
[ 8245.772641] R13: ffff880194b7bf48 R14: 0000000000000410 R15: 0000000000000000
[ 8245.772641] FS:  00007f991e77d840(0000) GS:ffff88023e280000(0000) knlGS:0000000000000000
[ 8245.772641] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 8245.772641] CR2: 00007fbbd325ee68 CR3: 000000021de8e000 CR4: 00000000000006e0
[ 8245.772641] Stack:
[ 8245.772641]  ffff880194b7bf00 ffff880202eb4000 ffff880194b7bf48 0000000000000410
[ 8245.772641]  ffff88020d047958 ffffffffa04ec6d5 ffff8801629b2ee8 0000000082987570
[ 8245.772641]  0000000000a5813f 0000000000000001 ffff880013006100 0000000000000002
[ 8245.772641] Call Trace:
[ 8245.772641]  [<ffffffffa04ec6d5>] btrfs_wq_submit_bio+0xe1/0x17b [btrfs]
[ 8245.772641]  [<ffffffff81086bff>] ? check_irq_usage+0x76/0x87
[ 8245.772641]  [<ffffffffa04ec825>] btree_submit_bio_hook+0xb6/0xd9 [btrfs]
[ 8245.772641]  [<ffffffffa04ebb7c>] ? btree_csum_one_bio+0xad/0xad [btrfs]
[ 8245.772641]  [<ffffffffa04eb1a6>] ? btree_io_failed_hook+0x5e/0x5e [btrfs]
[ 8245.772641]  [<ffffffffa050a6e7>] submit_one_bio+0x8c/0xc7 [btrfs]
[ 8245.772641]  [<ffffffffa050d75b>] submit_extent_page.isra.18+0x9d/0x186 [btrfs]
[ 8245.772641]  [<ffffffffa050d95b>] write_one_eb+0x117/0x1ae [btrfs]
[ 8245.772641]  [<ffffffffa050a79b>] ? end_extent_buffer_writeback+0x21/0x21 [btrfs]
[ 8245.772641]  [<ffffffffa0510510>] btree_write_cache_pages+0x2ab/0x385 [btrfs]
[ 8245.772641]  [<ffffffffa04eb2b8>] btree_writepages+0x23/0x5c [btrfs]
[ 8245.772641]  [<ffffffff8111c661>] do_writepages+0x23/0x2c
[ 8245.772641]  [<ffffffff81189cd4>] __writeback_single_inode+0xda/0x5bd
[ 8245.772641]  [<ffffffff8118aa60>] ? writeback_single_inode+0x2b/0x173
[ 8245.772641]  [<ffffffff8118aafd>] writeback_single_inode+0xc8/0x173
[ 8245.772641]  [<ffffffff8118ac95>] write_inode_now+0x8a/0x95
[ 8245.772641]  [<ffffffff81247bf0>] ? _atomic_dec_and_lock+0x30/0x4e
[ 8245.772641]  [<ffffffff8117cc5e>] iput+0x17d/0x26a
[ 8245.772641]  [<ffffffffa04ef355>] close_ctree+0x22a/0x325 [btrfs]
[ 8245.772641]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
[ 8245.772641]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
[ 8245.772641]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
[ 8245.772641]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
[ 8245.772641]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 8245.772641]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
[ 8245.772641]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
[ 8245.772641]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
[ 8245.772641]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
[ 8245.772641]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
[ 8245.772641]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
[ 8245.772641]  [<ffffffff814651ac>] int_signal+0x12/0x17
[ 8245.772641] Code: 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 f4 48 8b 46 70 a8 04 74 09 48 8b 5f 08 48 85 db 75 03 48 8b 1f 49 89 5c 24 68 <83> 7b 5c ff 74 04 f0 ff 43 50 49 83 7c 24 08 00 74 2c 4c 8d 6b
[ 8245.772641] RIP  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
[ 8245.772641]  RSP <ffff88020d0478b8>
[ 8245.845040] ---[ end trace a01d038397e99b93 ]---

For logical reasons such as the phase of the moon, this happened more
often with "-o inode_cache" than without any mount options.

After some debugging it turned out to be simple to understand what was
happening:

1) close_ctree() is called;

2) It then stops the transaction kthread, which commits the current
   transaction;

3) It asks the cleaner kthread to stop, which is currently running
   btrfs_delete_unused_bgs();

4) btrfs_delete_unused_bgs() finds an unused block group, starts a new
   transaction, deletes the block group, which implies COWing some
   tree nodes and leafs and dirtying their respective pages, and then
   finally it ends the transaction it started, without committing it;

5) The cleaner kthread stops;

6) close_ctree() releases (from memory) the block group objects, which
   produces the warning in the trace pasted above;

7) Then it invalidates all pages of the btree inode, by calling
   invalidate_inode_pages2(), which waits for any pages under writeback,
   and releases any non-dirty pages;

8) All work queues are destroyed (waiting first for their current tasks
   to finish execution);

9) A final iput() is called against the btree inode;

10) This iput triggers a writeback of the btree inode because it still
    has dirty pages;

11) This starts the whole chain of callbacks for the btree inode until
    it eventually reaches btrfs_wq_submit_bio() where it leads to a
    NULL pointer dereference because the work queues were already
    destroyed.

Fix this by making the cleaner commit any transaction that it started
after the transaction kthread was stopped.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

While the inode cache caching kthread is calling btrfs_unpin_free_ino(),
we could have a concurrent call to btrfs_return_ino() that adds a new
entry to the root's free space cache of pinned inodes. This concurrent
call does not acquire the fs_info->commit_root_sem before adding a new
entry if the caching state is BTRFS_CACHE_FINISHED, which is a problem
because the caching kthread calls btrfs_unpin_free_ino() after setting
the caching state to BTRFS_CACHE_FINISHED and therefore races with
the task calling btrfs_return_ino(), which is adding a new entry, while
the former (caching kthread) is navigating the cache's rbtree, removing
and freeing nodes from the cache's rbtree without acquiring the spinlock
that protects the rbtree.

This race resulted in memory corruption due to double free of struct
btrfs_free_space objects because both tasks can end up doing freeing the
same objects. Note that adding a new entry can result in merging it with
other entries in the cache, in which case those entries are freed.
This is particularly important as btrfs_free_space structures are also
used for the block group free space caches.

This memory corruption can be detected by a debugging kernel, which
reports it with the following trace:

[132408.501148] slab error in verify_redzone_free(): cache `btrfs_free_space': double free detected
[132408.505075] CPU: 15 PID: 12248 Comm: btrfs-ino-cache Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[132408.505075] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[132408.505075]  ffff880023e7d320 ffff880163d73cd8 ffffffff8145eec7 ffffffff81095dce
[132408.505075]  ffff880009735d40 ffff880163d73ce8 ffffffff81154e1e ffff880163d73d68
[132408.505075]  ffffffff81155733 ffffffffa054a95a ffff8801b6099f00 ffffffffa0505b5f
[132408.505075] Call Trace:
[132408.505075]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
[132408.505075]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
[132408.505075]  [<ffffffff81154e1e>] __slab_error.isra.28+0x25/0x36
[132408.505075]  [<ffffffff81155733>] __cache_free+0xe2/0x4b6
[132408.505075]  [<ffffffffa054a95a>] ? __btrfs_add_free_space+0x2f0/0x343 [btrfs]
[132408.505075]  [<ffffffffa0505b5f>] ? btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075]  [<ffffffff810f3b30>] ? time_hardirqs_off+0x15/0x28
[132408.505075]  [<ffffffff81084d42>] ? trace_hardirqs_off+0xd/0xf
[132408.505075]  [<ffffffff811563a1>] ? kfree+0xb6/0x14e
[132408.505075]  [<ffffffff811563d0>] kfree+0xe5/0x14e
[132408.505075]  [<ffffffffa0505b5f>] btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075]  [<ffffffffa0505e08>] caching_kthread+0x29e/0x2d9 [btrfs]
[132408.505075]  [<ffffffffa0505b6a>] ? btrfs_unpin_free_ino+0x99/0x99 [btrfs]
[132408.505075]  [<ffffffff8106698f>] kthread+0xef/0xf7
[132408.505075]  [<ffffffff810f3b08>] ? time_hardirqs_on+0x15/0x28
[132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075]  [<ffffffff814653d2>] ret_from_fork+0x42/0x70
[132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075] ffff880023e7d320: redzone 1:0x9f911029d74e35b, redzone 2:0x9f911029d74e35b.
[132409.501654] slab: double free detected in cache 'btrfs_free_space', objp ffff880023e7d320
[132409.503355] ------------[ cut here ]------------
[132409.504241] kernel BUG at mm/slab.c:2571!

Therefore fix this by having btrfs_unpin_free_ino() acquire the lock
that protects the rbtree while doing the searches and removing entries.

Fixes: 1c70d8fb ("Btrfs: fix inode caching vs tree log")
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

The free space entries are allocated using kmem_cache_zalloc(),
through __btrfs_add_free_space(), therefore we should use
kmem_cache_free() and not kfree() to avoid any confusion and
any potential problem. Looking at the kfree() definition at
mm/slab.c it has the following comment:

  /*
   * (...)
   *
   * Don't free memory not originally allocated by kmalloc()
   * or you will run into trouble.
   */

So better be safe and use kmem_cache_free().

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

We have a race between deleting an unused block group and balancing the
same block group that leads to an assertion failure/BUG(), producing the
following trace:

[181631.208236] BTRFS: assertion failed: 0, file: fs/btrfs/volumes.c, line: 2622
[181631.220591] ------------[ cut here ]------------
[181631.222959] kernel BUG at fs/btrfs/ctree.h:4062!
[181631.223932] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[181631.224566] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse acpi_cpufreq parpor$
[181631.224566] CPU: 8 PID: 17451 Comm: btrfs Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[181631.224566] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[181631.224566] task: ffff880127e09590 ti: ffff8800b5824000 task.ti: ffff8800b5824000
[181631.224566] RIP: 0010:[<ffffffffa03f19f6>]  [<ffffffffa03f19f6>] assfail.constprop.50+0x1e/0x20 [btrfs]
[181631.224566] RSP: 0018:ffff8800b5827ae8  EFLAGS: 00010246
[181631.224566] RAX: 0000000000000040 RBX: ffff8800109fc218 RCX: ffffffff81095dce
[181631.224566] RDX: 0000000000005124 RSI: ffffffff81464819 RDI: 00000000ffffffff
[181631.224566] RBP: ffff8800b5827ae8 R08: 0000000000000001 R09: 0000000000000000
[181631.224566] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800109fc200
[181631.224566] R13: ffff880020095000 R14: ffff8800b1a13f38 R15: ffff880020095000
[181631.224566] FS:  00007f70ca0b0c80(0000) GS:ffff88013ec00000(0000) knlGS:0000000000000000
[181631.224566] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[181631.224566] CR2: 00007f2872ab6e68 CR3: 00000000a717c000 CR4: 00000000000006e0
[181631.224566] Stack:
[181631.224566]  ffff8800b5827ba8 ffffffffa03f3916 ffff8800b5827b38 ffffffffa03d080e
[181631.224566]  ffffffffa03d1423 ffff880020095000 ffff88001233c000 0000000000000001
[181631.224566]  ffff880020095000 ffff8800b1a13f38 0000000a69c00000 0000000000000000
[181631.224566] Call Trace:
[181631.224566]  [<ffffffffa03f3916>] btrfs_remove_chunk+0xa4/0x6bb [btrfs]
[181631.224566]  [<ffffffffa03d080e>] ? join_transaction.isra.8+0xb9/0x3ba [btrfs]
[181631.224566]  [<ffffffffa03d1423>] ? wait_current_trans.isra.13+0x22/0xfc [btrfs]
[181631.224566]  [<ffffffffa03f3fbc>] btrfs_relocate_chunk.isra.29+0x8f/0xa7 [btrfs]
[181631.224566]  [<ffffffffa03f54df>] btrfs_balance+0xaa4/0xc52 [btrfs]
[181631.224566]  [<ffffffffa03fd388>] btrfs_ioctl_balance+0x23f/0x2b0 [btrfs]
[181631.224566]  [<ffffffff810872f9>] ? trace_hardirqs_on+0xd/0xf
[181631.224566]  [<ffffffffa04019a3>] btrfs_ioctl+0xfe2/0x2220 [btrfs]
[181631.224566]  [<ffffffff812603ed>] ? __this_cpu_preempt_check+0x13/0x15
[181631.224566]  [<ffffffff81084669>] ? arch_local_irq_save+0x9/0xc
[181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
[181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
[181631.224566]  [<ffffffff8103e48c>] ? __do_page_fault+0x211/0x424
[181631.224566]  [<ffffffff811755e6>] do_vfs_ioctl+0x3c6/0x479
(...)

The sequence of steps leading to this are:

           CPU 0                                         CPU 1

  btrfs_balance()
    btrfs_relocate_chunk()

      btrfs_relocate_block_group(bg X)
        btrfs_lookup_block_group(bg X)

                                               cleaner_kthread
                                                  locks fs_info->cleaner_mutex

                                                  btrfs_delete_unused_bgs()
                                                    finds bg X, which became
                                                    unused in the previous
                                                    transaction

                                                    checks bg X ->ro == 0,
                                                    so it proceeds
        sets bg X ->ro to 1
        (btrfs_set_block_group_ro(bg X))

        blocks on fs_info->cleaner_mutex
                                                    btrfs_remove_chunk(bg X)
                                                  unlocks fs_info->cleaner_mutex

        acquires fs_info->cleaner_mutex
        relocate_block_group()
          --> does nothing, no extents found in
              the extent tree from bg X
        unlocks fs_info->cleaner_mutex

      btrfs_relocate_block_group(bg X) returns

    btrfs_remove_chunk(bg X)
       extent map not found
          --> ASSERT(0)

Fix this by using a new mutex to make sure these 2 operations, block
group relocation and removal, are serialized.

This issue is reproducible by running fstests generic/038 (which stresses
chunk allocation and automatic removal of unused block groups) together
with the following balance loop:

    while true; do btrfs balance start -dusage=0 <mountpoint> ; done
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Although it is a rare case, we'd better free previous allocated
memory on error.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

It is introduced by:
 c404e0dc
 Btrfs: fix use-after-free in the finishing procedure of the device replace

But seems no relationship with that bug, this patch revirt these
code block for cleanup.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Currently, we can only set a limitation on a qgroup, but we
can not clear it.

This patch provide a choice to user to clear a limitation on
qgroup by passing a value of CLEAR_VALUE(-1) to kernel.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

There is a cut and paste error so instead of freeing "head_ref", we free
"ref" twice.

Fixes: 3368d001 ('btrfs: qgroup: Record possible quota-related extent for qgroup.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Merge branch 'sysfs-fsdevices-4.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into anand

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>

drivers/cpufreq/cpufreq.c is already using this function. And now btrfs
needs it as well. Export symbol kobject_move().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Sterba <dsterba@suse.cz>

This patch will add support to show the replacing target in sysfs
during the process of replacement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>

When btrfs on a device is overwritten with a new btrfs (mkfs),
the old btrfs instance in the kernel becomes stale. So with this
patch, if kernel finds device is overwritten then delete the stale
fsid/uuid.
Signed-off-by: Anand Jain <anand.jain@oracle.com>

Neil Horman pointed out a problem where if he did something like this

receive A
snap A B
change B
send -p A B

and then on another box do

recieve A
receive B

the receive B would fail because we use the UUID of A for the clone sources for
B.  This makes sense most of the time because normally you are sending from the
original sources, not a received source.  However when you use a recieved subvol
its UUID is going to be something completely different, so if you then try to
receive the diff on a different volume it won't find the UUID because the new A
will be something else.  The only constant is the received uuid.  So instead
check to see if we have received_uuid set on the root, and if so use that as the
clone source, as btrfs receive looks for matches either in received_uuid or
uuid.  Thanks,
Reported-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Chris Mason <clm@fb.com>

@log_root_tree should not be referenced after kfree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs will report no_space when we run following write and delete
file loop:
 # FILE_SIZE_M=[ 75% of fs space ]
 # DEV=[ some dev ]
 # MNT=[ some dir ]
 #
 # mkfs.btrfs -f "$DEV"
 # mount -o nodatacow "$DEV" "$MNT"
 # for ((i = 0; i < 100; i++)); do dd if=/dev/zero of="$MNT"/file0 bs=1M count="$FILE_SIZE_M"; rm -f "$MNT"/file0; done
 #

Reason:
 iput() and evict() is run after write pages to block device, if
 write pages work is not finished before next write, the "rm"ed space
 is not freed, and caused above bug.

Fix:
 We can add "-o flushoncommit" mount option to avoid above bug, but
 it have performance problem. Actually, we can to wait for on-the-fly
 writes only when no-space happened, it is which this patch do.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

qgroup.

Make snapshot accounting work with new extent-oriented mechanism by
skipping given root in new/old_roots in create_pending_snapshot().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

This is used by later qgroup fix patches for snapshot.

As current snapshot accounting is done by btrfs_qgroup_inherit(), but
new extent oriented quota mechanism will account extent from
btrfs_copy_root() and other snapshot things, causing wrong result.

So add this ability to handle snapshot accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

This function will delete unode with given (val,aux) pair.
And with this patch, seqnum for debug usage doesn't have any meaning
now, so remove them.

This is used by later patches to skip snapshot root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Goodbye, the old mechanisim.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Since the self test transaction don't have delayed_ref_roots, so use
find_all_roots() and export btrfs_qgroup_account_extent() to simulate it
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Switch from old ref_node based qgroup to extent based qgroup mechanism
for normal operations.

The new mechanism should hugely reduce the overhead of btrfs quota
system, and further more, the codes and logic should be more clean and
easier to maintain.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Switch rescan to use the new new extent oriented mechanism.

As rescan is also based on extent, new mechanism is just a perfect match
for rescan.

With re-designed internal functions, rescan is quite easy, just call
btrfs_find_all_roots() and then btrfs_qgroup_account_one_extent().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs_qgroup_account_extents().

The new btrfs_qgroup_account_extents() function should be called in
btrfs_commit_transaction() and it will update all the qgroup according
to delayed_ref_root->dirty_extent_root.

The new function can handle both normal operation during
commit_transaction() or in rescan in a unified method with clearer
logic.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs_find_all_roots().

Allow btrfs_find_all_roots() to skip all delayed_ref_head lock and tree
lock to do tree search.

This is important for later qgroup implement which will call
find_all_roots() after fs trees are committed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Add function btrfs_qgroup_prepare_account_extents() to get old_roots
which are needed for qgroup.

We do it in commit_transaction() and before switch_roots(), and only
search commit_root, so it gives a quite accurate view for previous
transaction.

With old_roots from previous transaction, we can use it to do accurate
account with current transaction.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Add hook in add_delayed_ref_head() to record quota-related extent record
into delayed_ref_root->dirty_extent_record rb-tree for later qgroup
accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Add function qgroup_update_counters(), which will update related
qgroups' rfer/excl according to old/new_roots.

This is one of the two core functions for the new qgroup implement.

This is based on btrfs_adjust_coutners() but with clearer logic and
comment.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

This function is used to update refcnt for qgroups.
And is one of the two core functions used in the new qgroup implement.

This is based on the old update_old/new_refcnt, but provides a unified
logic and behavior.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs: extent-tree: Use ref_node to replace unneeded parameters in __inc_extent_ref() and __free_extent()

__btrfs_inc_extent_ref() and __btrfs_free_extent() have already had too
many parameters, but three of them can be extracted from
btrfs_delayed_ref_node struct.

So use btrfs_delayed_ref_node struct as a single parameter to replace
the bytenr/num_byte/no_quota parameters.

The real objective of this patch is to allow btrfs_qgroup_record_ref()
get the delayed_ref_node in incoming qgroup patches.

Other functions calling btrfs_qgroup_record_ref() are not affected since
the rest will only add/sub exclusive extents, where node is not used.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Use inline functions to do such things, to improve readability.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Cleanup the rb_tree merge/insert/update functions, since now we use list
instead of rb_tree now.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

This patch replace the rbtree used in ref_head to list.
This has the following advantage:
1) Easier merge logic.
With the new list implement, we only need to care merging the tail
ref_node with the new ref_node.
And this can be done quite easy at insert time, no need to do a
indicated merge at run_delayed_refs().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Old __merge_refs() in backref.c will even merge refs whose root_id are
different, which makes qgroup gives wrong result.

Fix it by checking ref_for_same_block() before any mode specific works.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

lockdep report following warning in test:
 [25176.843958] =================================
 [25176.844519] [ INFO: inconsistent lock state ]
 [25176.845047] 4.1.0-rc3 #22 Tainted: G        W
 [25176.845591] ---------------------------------
 [25176.846153] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 [25176.846713] fsstress/26661 [HC0[0]:SC1[1]:HE1:SE0] takes:
 [25176.847246]  (&wr_ctx->wr_lock){+.?...}, at: [<ffffffffa04cdc6d>] scrub_free_ctx+0x2d/0xf0 [btrfs]
 [25176.847838] {SOFTIRQ-ON-W} state was registered at:
 [25176.848396]   [<ffffffff810bf460>] __lock_acquire+0x6a0/0xe10
 [25176.848955]   [<ffffffff810bfd1e>] lock_acquire+0xce/0x2c0
 [25176.849491]   [<ffffffff816489af>] mutex_lock_nested+0x7f/0x410
 [25176.850029]   [<ffffffffa04d04ff>] scrub_stripe+0x4df/0x1080 [btrfs]
 [25176.850575]   [<ffffffffa04d11b1>] scrub_chunk.isra.19+0x111/0x130 [btrfs]
 [25176.851110]   [<ffffffffa04d144c>] scrub_enumerate_chunks+0x27c/0x510 [btrfs]
 [25176.851660]   [<ffffffffa04d3b87>] btrfs_scrub_dev+0x1c7/0x6c0 [btrfs]
 [25176.852189]   [<ffffffffa04e918e>] btrfs_dev_replace_start+0x36e/0x450 [btrfs]
 [25176.852771]   [<ffffffffa04a98e0>] btrfs_ioctl+0x1e10/0x2d20 [btrfs]
 [25176.853315]   [<ffffffff8121c5b8>] do_vfs_ioctl+0x318/0x570
 [25176.853868]   [<ffffffff8121c851>] SyS_ioctl+0x41/0x80
 [25176.854406]   [<ffffffff8164da17>] system_call_fastpath+0x12/0x6f
 [25176.854935] irq event stamp: 51506
 [25176.855511] hardirqs last  enabled at (51506): [<ffffffff810d4ce5>] vprintk_emit+0x225/0x5e0
 [25176.856059] hardirqs last disabled at (51505): [<ffffffff810d4b77>] vprintk_emit+0xb7/0x5e0
 [25176.856642] softirqs last  enabled at (50886): [<ffffffff81067a23>] __do_softirq+0x363/0x640
 [25176.857184] softirqs last disabled at (50949): [<ffffffff8106804d>] irq_exit+0x10d/0x120
 [25176.857746]
 other info that might help us debug this:
 [25176.858845]  Possible unsafe locking scenario:
 [25176.859981]        CPU0
 [25176.860537]        ----
 [25176.861059]   lock(&wr_ctx->wr_lock);
 [25176.861705]   <Interrupt>
 [25176.862272]     lock(&wr_ctx->wr_lock);
 [25176.862881]
  *** DEADLOCK ***

Reason:
 Above warning is caused by:
 Interrupt
 -> bio_endio()
 -> ...
 -> scrub_put_ctx()
 -> scrub_free_ctx() *1
 -> ...
 -> mutex_lock(&wr_ctx->wr_lock);

 scrub_put_ctx() is allowed to be called in end_bio interrupt, but
 in code design, it will never call scrub_free_ctx(sctx) in interrupe
 context(above *1), because btrfs_scrub_dev() get one additional
 reference of sctx->refs, which makes scrub_free_ctx() only called
 withine btrfs_scrub_dev().

 Now the code runs out of our wish, because free sequence in
 scrub_pending_bio_dec() have a gap.

 Current code:
 -----------------------------------+-----------------------------------
 scrub_pending_bio_dec()            |  btrfs_scrub_dev
 -----------------------------------+-----------------------------------
 atomic_dec(&sctx->bios_in_flight); |
 wake_up(&sctx->list_wait);         |
                                    | scrub_put_ctx()
                                    | -> atomic_dec_and_test(&sctx->refs)
 scrub_put_ctx(sctx);               |
 -> atomic_dec_and_test(&sctx->refs)|
 -> scrub_free_ctx()                |
 -----------------------------------+-----------------------------------

 We expected:
 -----------------------------------+-----------------------------------
 scrub_pending_bio_dec()            |  btrfs_scrub_dev
 -----------------------------------+-----------------------------------
 atomic_dec(&sctx->bios_in_flight); |
 wake_up(&sctx->list_wait);         |
 scrub_put_ctx(sctx);               |
 -> atomic_dec_and_test(&sctx->refs)|
                                    | scrub_put_ctx()
                                    | -> atomic_dec_and_test(&sctx->refs)
                                    | -> scrub_free_ctx()
 -----------------------------------+-----------------------------------

Fix:
 Move scrub_pending_bio_dec() to a workqueue, to avoid this function run
 in interrupt context.
 Tested by check tracelog in debug.

Changelog v1->v2:
 Use workqueue instead of adjust function call sequence in v1,
 because v1 will introduce a bug pointed out by:
 Filipe David Manana <fdmanana@gmail.com>
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

The extent-same code rejects requests with an unaligned length. This
poses a problem when we want to dedupe the tail extent of files as we
skip cloning the portion between i_size and the extent boundary.

If we don't clone the entire extent, it won't be deleted. So the
combination of these behaviors winds up giving us worst-case dedupe on
many files.

We can fix this by allowing a length that extents to i_size and
internally aligining those to the end of the block. This is what
btrfs_ioctl_clone() so we can just copy that check over.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>

max_to_defrag represents the number of pages to defrag rather than the last
page of the file range to be defragged.

Consider a file having 10 4k blocks (i.e. blocks in the range [0 - 9]). If the
defrag ioctl was invoked for the block range [3 - 6], then max_to_defrag
should actually have the value 4. Instead in the current code we end up
setting it to 6.

Now, this does not (yet) cause an issue since the first part of the while loop
condition in btrfs_defrag_file() (i.e. "i <= last_index") causes the control
to flow out of the while loop before any buggy behavior is actually caused. So
the patch just makes sure that max_to_defrag ends up having the right value
rather than fixing a bug. I did run the xfstests suite to make sure that the
code does not regress.

Changelog: v1->v2:
Provide a much descriptive commit message.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>

Read-ahead is done for the pages in the range [ra_index, ra_index + cluster -
1]. So the next read-ahead should be starting from the page at index 'ra_index
+ cluster' (unless we deemed that the extent at 'ra_index + cluster' as
non-defraggable) rather than from the page at index 'ra_index +
max_cluster'. This patch fixes this. I did run the xfstests suite to make sure
that the code does not regress.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>

When allocating a new chunk or removing one we need to update num_devs
device items and insert or remove a chunk item in the chunk tree, so
in the worst case the space needed in the chunk space_info is:

  btrfs_calc_trunc_metadata_size(chunk_root, num_devs) +
     btrfs_calc_trans_metadata_size(chunk_root, 1)

That is, in the worst case we need to cow num_devs paths and cow 1 other
path that can result in splitting every node and leaf, and each path
consisting of BTRFS_MAX_LEVEL - 1 nodes and 1 leaf. We were requiring
some additional chunk_root->nodesize * BTRFS_MAX_LEVEL * num_devs bytes,
which were unnecessary since updating the existing device items does
not result in splitting the nodes and leaf since after updating them
they remain with the same size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>