- 24 Mar, 2023 1 commit
-
-
Palmer Dabbelt authored
guoren@kernel.org <guoren@kernel.org> says: From: Guo Ren <guoren@linux.alibaba.com> The patches convert riscv to use the generic entry infrastructure from kernel/entry/*. Some optimization for entry.S with new .macro and merge ret_from_kernel_thread into ret_from_fork. * b4-shazam-merge: riscv: entry: Consolidate general regs saving/restoring riscv: entry: Consolidate ret_from_kernel_thread into ret_from_fork riscv: entry: Remove extra level wrappers of trace_hardirqs_{on,off} riscv: entry: Convert to generic entry riscv: entry: Add noinstr to prevent instrumentation inserted riscv: ptrace: Remove duplicate operation Link: https://lore.kernel.org/r/20230222033021.983168-1-guoren@kernel.orgSigned-off-by:Palmer Dabbelt <palmer@rivosinc.com>
-
- 23 Mar, 2023 6 commits
-
-
Jisheng Zhang authored
Consolidate the saving/restoring GPs (except zero, ra, sp, gp, tp and t0) into save_from_x6_to_x31/restore_from_x6_to_x31 macros. No functional change intended. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Reviewed-by:
Guo Ren <guoren@kernel.org> Reviewed-by:
Björn Töpel <bjorn@rivosinc.com> Tested-by:
-
Jisheng Zhang authored
The ret_from_kernel_thread() behaves similarly with ret_from_fork(), the only difference is whether call the fn(arg) or not, this can be achieved by testing fn is NULL or not, I.E s0 is 0 or not. Many architectures have done the same thing, it makes entry.S more clean. Signed-off-by:
-
Jisheng Zhang authored
Since riscv is converted to generic entry, there's no need for the extra wrappers of trace_hardirqs_{on,off}. Signed-off-by: -
Guo Ren authored
This patch converts riscv to use the generic entry infrastructure from kernel/entry/*. The generic entry makes maintainers' work easier and codes more elegant. Here are the changes: - More clear entry.S with handle_exception and ret_from_exception - Get rid of complex custom signal implementation - Move syscall procedure from assembly to C, which is much more readable. - Connect ret_from_fork & ret_from_kernel_thread to generic entry. - Wrap with irqentry_enter/exit and syscall_enter/exit_from_user_mode - Use the standard preemption code instead of custom Suggested-by:
Huacai Chen <chenhuacai@kernel.org> Reviewed-by:
Yipeng Zou <zouyipeng@huawei.com> Tested-by:
Guo Ren <guoren@linux.alibaba.com> Signed-off-by:
-
Guo Ren authored
Without noinstr the compiler is free to insert instrumentation (think all the k*SAN, KCov, GCov, ftrace etc..) which can call code we're not yet ready to run this early in the entry path, for instance it could rely on RCU which isn't on yet, or expect lockdep state. (by peterz) Link: https://lore.kernel.org/linux-riscv/YxcQ6NoPf3AH0EXe@hirez.programming.kicks-ass.net/Reviewed-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
-
Guo Ren authored
The TIF_SYSCALL_TRACE is controlled by a common code, see kernel/ptrace.c and include/linux/thread_info.h. clear_task_syscall_work(child, SYSCALL_TRACE); Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
-
- 15 Mar, 2023 16 commits
-
-
Palmer Dabbelt authored
Andrew Jones <ajones@ventanamicro.com> says: When the Zicboz extension is available we can more rapidly zero naturally aligned Zicboz block sized chunks of memory. As pages are always page aligned and are larger than any Zicboz block size will be, then clear_page() appears to be a good candidate for the extension. While cycle count and energy consumption should also be considered, we can be pretty certain that implementing clear_page() with the Zicboz extension is a win by comparing the new dynamic instruction count with its current count[1]. Doing so we see that the new count is just over a quarter of the old count (see patch6's commit message for more details). For those of you who reviewed v1[2], you may be looking for the memset() patches. As pointed out in v1, and a couple follow-up emails, it's not clear that patching memset() is a win yet. When I get a chance to test on real hardware with a comprehensive benchmark collection then I can post the memset() patches separately (assuming the benchmarks show it's worthwhile). * b4-shazam-merge: RISC-V: KVM: Expose Zicboz to the guest RISC-V: KVM: Provide UAPI for Zicboz block size RISC-V: Use Zicboz in clear_page when available RISC-V: cpufeatures: Put the upper 16 bits of patch ID to work RISC-V: Add Zicboz detection and block size parsing dt-bindings: riscv: Document cboz-block-size RISC-V: Factor out body of riscv_init_cbom_blocksize loop RISC-V: alternatives: Support patching multiple insns in assembly Link: https://lore.kernel.org/r/20230224162631.405473-1-ajones@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
Guests may use the cbo.zero instruction when the CPU has the Zicboz extension and the hypervisor sets henvcfg.CBZE. Add Zicboz support for KVM guests which may be enabled and disabled from KVM userspace using the ISA extension ONE_REG API. Signed-off-by:
Andrew Jones <ajones@ventanamicro.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20230224162631.405473-9-ajones@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
We're about to allow guests to use the Zicboz extension. KVM userspace needs to know the cache block size in order to properly advertise it to the guest. Provide a virtual config register for userspace to get it with the GET_ONE_REG API, but setting it cannot be supported, so disallow SET_ONE_REG. Signed-off-by:
-
Andrew Jones authored
Using memset() to zero a 4K page takes 563 total instructions, where 20 are branches. clear_page(), with Zicboz and a 64 byte block size, takes 169 total instructions, where 4 are branches and 33 are nops. Even though the block size is a variable, thanks to alternatives, we can still implement a Duff device without having to do any preliminary calculations. This is achieved by using the alternatives' cpufeature value (the upper 16 bits of patch_id). The value used is the maximum zicboz block size order accepted at the patch site. This enables us to stop patching / unrolling when 4K bytes have been zeroed (we would loop and continue after 4K if the page size would be larger) For 4K pages, unrolling 16 times allows block sizes of 64 and 128 to only loop a few times and larger block sizes to not loop at all. Since cbo.zero doesn't take an offset, we also need an 'add' after each instruction, making the loop body 112 to 160 bytes. Hopefully this is small enough to not cause icache misses. Signed-off-by:
-
Andrew Jones authored
cpufeature IDs are consecutive integers starting at 26, so a 32-bit patch ID allows an aircraft carrier load of feature IDs. Repurposing the upper 16 bits still leaves a boat load of feature IDs and gains 16 bits which may be used to control patching on a per patch-site basis. This will be initially used in Zicboz's application to clear_page(), as Zicboz's block size must also be considered. In that case, the upper 16-bit value's role will be to convey the maximum block size which the Zicboz clear_page() implementation supports. cpufeature patch sites which need to check for the existence or absence of other cpufeatures may also be able to make use of this. Signed-off-by:
-
Andrew Jones authored
Parse "riscv,cboz-block-size" from the DT by piggybacking on Zicbom's riscv_init_cbom_blocksize(). Additionally check the DT for the presence of the "zicboz" extension and, when it's present, validate the parsed cboz block size as we do Zicbom's cbom block size with riscv_isa_extension_check(). Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
-
Andrew Jones authored
The Zicboz operation (cbo.zero) operates on a block-size defined for the cpu-core. While we already have the riscv,cbom-block-size property, it only provides the block size for Zicbom operations. Even though it's likely Zicboz and Zicbom will use the same size, that's not required by the specification. Create another property specifically for Zicboz. Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230224162631.405473-4-ajones@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
Refactor riscv_init_cbom_blocksize() to prepare for it to be used for both cbom block size and cboz block size. Signed-off-by:
-
Andrew Jones authored
As pointed out in commit d374a165 ("RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2"), we need quotes around parameters passed to macros within macros to avoid spaces being interpreted as separators. ALT_NEW_CONTENT was trying to handle this by defining new_c has a vararg, but this isn't sufficient for calling ALTERNATIVE() from assembly with multiple instructions in the new/old sequences. Remove the vararg "hack" and use quotes. Signed-off-by:
-
Palmer Dabbelt authored
Andrew Jones <ajones@ventanamicro.com> says: This series has no intended functional change. These cleanups were found while renaming errata_id to patch_id in order to better convey that its purpose is larger than errata (it's also for cpufeatures). * b4-shazam-merge: riscv: cpufeature: Drop errata_list.h and other unused includes riscv: lib: Include hwcap.h directly riscv: alternatives: Rename errata_id to patch_id riscv: alternatives: Remove unnecessary define and unused struct riscv: Rename Kconfig.erratas to Kconfig.errata riscv: Clarify RISCV_ALTERNATIVE help text Link: https://lore.kernel.org/r/20230224154601.88163-1-ajones@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
Drop errata_list.h, since cpufeature.c includes hwcap.h directly to get cpufeature IDs. And, while there, prune the rest of the unused includes too. Signed-off-by:
Heiko Stuebner <heiko.stuebner@vrull.eu> Link: https://lore.kernel.org/r/20230224154601.88163-7-ajones@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
When using alternatives for cpufeatures we should include hwcap.h directly, rather than through errata_list.h. Opportunistically drop an unused include too. Signed-off-by:
-
Andrew Jones authored
Alternatives are used for both errata and cpufeatures. Use a more generic name, 'patch_id', as in "ID of code patching site", to avoid confusion when alternatives are used for cpufeatures. Signed-off-by:
-
Andrew Jones authored
A define and a struct were introduced with commit 6f4eea90 ("riscv: Introduce alternative mechanism to apply errata solution"), which introduced alternatives to RISC-V. The define is used for an arbitrary string length, specific to sifive errata, so just use the number directly there instead. The struct has never been used, so remove it. Signed-off-by:
-
Andrew Jones authored
Errata is already plural for erratum. Rename it to make the grammar gooder. Signed-off-by:
-
Andrew Jones authored
Clarify RISCV_ALTERNATIVE's help text by pointing out that code patching is not only done at boot time, but also module load time. Also point out that this is the minimal possible overhead. Signed-off-by:
-
- 10 Mar, 2023 1 commit
-
-
Palmer Dabbelt authored
Qinglin Pan <panqinglin00@gmail.com> says: Svnapot is a RISC-V extension for marking contiguous 4K pages as a non-4K page. This patch set is for using Svnapot in hugetlb fs and huge vmap. This patchset adds a Kconfig item for using Svnapot in "Platform type"->"SVNAPOT extension support". Its default value is on, and people can set it off if they don't allow kernel to detect Svnapot hardware support and leverage it. Tested on: - qemu rv64 with "Svnapot support" off and svnapot=true. - qemu rv64 with "Svnapot support" on and svnapot=true. - qemu rv64 with "Svnapot support" off and svnapot=false. - qemu rv64 with "Svnapot support" on and svnapot=false. * b4-shazam-merge: riscv: mm: support Svnapot in huge vmap riscv: mm: support Svnapot in hugetlb page riscv: mm: modify pte format for Svnapot Link: https://lore.kernel.org/r/20230209131647.17245-1-panqinglin00@gmail.com [Palmer: fix up the feature ordering in the merge] Signed-off-by:
-
- 08 Mar, 2023 3 commits
-
-
Qinglin Pan authored
As HAVE_ARCH_HUGE_VMAP and HAVE_ARCH_HUGE_VMALLOC is supported, we can implement arch_vmap_pte_range_map_size and arch_vmap_pte_supported_shift for Svnapot to support huge vmap about napot size. It can be tested by huge vmap used in pci driver. Huge vmalloc with svnapot can be tested by test_vmalloc with [1] applied, and probe this module to run fix_size_alloc_test with use_huge true. [1]https://lore.kernel.org/all/20221212055657.698420-1-panqinglin2020@iscas.ac.cn/Signed-off-by:
Qinglin Pan <panqinglin00@gmail.com> Reviewed-by:
-
Qinglin Pan authored
Svnapot can be used to support 64KB hugetlb page, so it can become a new option when using hugetlbfs. Add a basic implementation of hugetlb page, and support 64KB as a size in it by using Svnapot. For test, boot kernel with command line contains "default_hugepagesz=64K hugepagesz=64K hugepages=20" and run a simple test like this: tools/testing/selftests/vm/map_hugetlb 1 16 And it should be passed. Signed-off-by:
-
Qinglin Pan authored
Add one alternative to enable/disable svnapot support, enable this static key when "svnapot" is in the "riscv,isa" field of fdt and SVNAPOT compile option is set. It will influence the behavior of has_svnapot. All code dependent on svnapot should make sure that has_svnapot return true firstly. Modify PTE definition for Svnapot, and creates some functions in pgtable.h to mark a PTE as napot and check if it is a Svnapot PTE. Until now, only 64KB napot size is supported in spec, so some macros has only 64KB version. Signed-off-by:
-
- 05 Mar, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess -
Masahiro Yamada authored
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
-
Al Viro authored
Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 04 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
-
Linus Torvalds authored
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: -
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
-
