Pull dmaengine updates from Vinod Koul:
 "New drivers/devices:

   - Support for QCOM SM8150 GPI DMA

  Updates:

   - Big pile of idxd updates including support for performance
     monitoring

   - Support in dw-edma for interleaved dma

   - Support for synchronize() in Xilinx driver"

* tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
  dmaengine: idxd: Enable IDXD performance monitor support
  dmaengine: idxd: Add IDXD performance monitor support
  dmaengine: idxd: remove MSIX masking for interrupt handlers
  dmaengine: idxd: device cmd should use dedicated lock
  dmaengine: idxd: support reporting of halt interrupt
  dmaengine: idxd: enable SVA feature for IOMMU
  dmaengine: idxd: convert sprintf() to sysfs_emit() for all usages
  dmaengine: idxd: add interrupt handle request and release support
  dmaengine: idxd: add support for readonly config mode
  dmaengine: idxd: add percpu_ref to descriptor submission path
  dmaengine: idxd: remove detection of device type
  dmaengine: idxd: iax bus removal
  dmaengine: idxd: fix cdev setup and free device lifetime issues
  dmaengine: idxd: fix group conf_dev lifetime
  dmaengine: idxd: fix engine conf_dev lifetime
  dmaengine: idxd: fix wq conf_dev 'struct device' lifetime
  dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime
  dmaengine: idxd: use ida for device instance enumeration
  dmaengine: idxd: removal of pcim managed mmio mapping
  dmaengine: idxd: cleanup pci interrupt vector allocation management
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This adds support to the remoteproc core for detaching Linux from a
  running remoteproc, e.g. to reboot Linux while leaving the remoteproc
  running, and it enable this support in the stm32 remoteproc driver.

  It also introduces a property for memory carveouts to track if they
  are iomem or system ram, to enable proper handling of the differences.

  The imx_rproc received a number of fixes and improvements, in
  particular support for attaching to already running remote processors
  and i.MX8MQ and i.MX8MM support.

  The Qualcomm wcss driver gained support for starting and stopping the
  wireless subsystem on QCS404, when not using the TrustZone-based
  validator/loader.

  Finally it brings a few fixes to the TI PRU and to the firmware loader
  for the Qualcomm modem subsystem drivers"

* tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (53 commits)
  remoteproc: stm32: add capability to detach
  dt-bindings: remoteproc: stm32-rproc: add new mailbox channel for detach
  remoteproc: imx_rproc: support remote cores booted before Linux Kernel
  remoteproc: imx_rproc: move memory parsing to rproc_ops
  remoteproc: imx_rproc: enlarge IMX7D_RPROC_MEM_MAX
  remoteproc: imx_rproc: add missing of_node_put
  remoteproc: imx_rproc: fix build error without CONFIG_MAILBOX
  remoteproc: qcom: wcss: Remove unnecessary PTR_ERR()
  remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR()
  remoteproc: qcom: pas: Add modem support for SDX55
  dt-bindings: remoteproc: qcom: pas: Add binding for SDX55
  remoteproc: qcom: wcss: Fix return value check in q6v5_wcss_init_mmio()
  remoteproc: pru: Fix and cleanup firmware interrupt mapping logic
  remoteproc: pru: Fix wrong success return value for fw events
  remoteproc: pru: Fixup interrupt-parent logic for fw events
  remoteproc: qcom: wcnss: Allow specifying firmware-name
  remoteproc: qcom: wcss: explicitly request exclusive reset control
  remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404
  remoteproc: qcom: wcss: populate hardcoded param using driver data
  ...

Pull rpmsg updates from Bjorn Andersson:
 "In addition to some bug fixes and cleanups this adds support for
  exposing the virtio based transport to user space using the rpmsg_char
  driver"

* tag 'rpmsg-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
  rpmsg: char: Return an error if device already open
  rpmsg: virtio: Register the rpmsg_char device
  rpmsg: char: Use rpmsg_sendto to specify the message destination address
  rpmsg: Add short description of the IOCTL defined in UAPI.
  rpmsg: Move RPMSG_ADDR_ANY in user API
  rpmsg: char: Rename rpmsg_char_init to rpmsg_chrdev_init

Pull hwspinlock udpates from Bjorn Andersson:
 "This removes the SIRF hardware spinlock driver, as the platform is
  being removed"

* tag 'hwlock-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  hwspinlock: remove sirf driver

Merge branch 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Christoph Hellwig has taken a cleaver and trimmed off the not-needed
  code and nicely folded duplicate code in the generic framework.

  This lays the groundwork for more work to add extra DMA-backend-ish in
  the future. Along with that some bug-fixes to make this a nice working
  package"

* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: don't override user specified size in swiotlb_adjust_size
  swiotlb: Fix the type of index
  swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
  ARM: Qualify enabling of swiotlb_init()
  swiotlb: remove swiotlb_nr_tbl
  swiotlb: dynamically allocate io_tlb_default_mem
  swiotlb: move global variables into a new io_tlb_mem structure
  xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
  xen-swiotlb: split xen_swiotlb_init
  swiotlb: lift the double initialization protection from xen-swiotlb
  xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
  xen-swiotlb: remove xen_set_nslabs
  xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
  xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
  swiotlb: split swiotlb_tbl_sync_single
  swiotlb: move orig addr and size validation into swiotlb_bounce
  swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
  powerpc/svm: stop using io_tlb_start

Pull dma-mapping updates from Christoph Hellwig:

 - add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)

 - fix a copyright notice (Hao Fang)

 - add an unlikely annotation to dma_mapping_error (Heiner Kallweit)

 - remove a pointless empty line (Wang Qing)

 - add support for multi-pages map/unmap bencharking (Xiang Chen)

* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: add unlikely hint to error path in dma_mapping_error
  dma-mapping: benchmark: Add support for multi-pages map/unmap
  dma-mapping: benchmark: use the correct HiSilicon copyright
  dma-mapping: remove a pointless empty line in dma_alloc_coherent
  media: uvcvideo: Use dma_alloc_noncontiguous API
  dma-iommu: implement ->alloc_noncontiguous
  dma-iommu: refactor iommu_dma_alloc_remap
  dma-mapping: add a dma_alloc_noncontiguous API
  dma-mapping: refactor dma_{alloc,free}_pages
  dma-mapping: add a dma_mmap_pages helper

Pull m68knommu updates from Greg Ungerer:

 - a fix for interrupt number range checking for the ColdFire SIMR
   interrupt controller.

 - changes for the binfmt_flat binary loader to allow RISC-V nommu
   support it needs to be able to accept flat binaries that have no gap
   between the text and data sections.

* tag 'm68knommu-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire: fix irq ranges
  riscv: Disable data start offset in flat binaries
  binfmt_flat: allow not offsetting data start

Pull parisc architecture updates from Helge Deller:

 - switch to generic syscall header scripts

 - minor typo fix in setup.c

* tag 'for-5.13/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix typo in setup.c
  parisc: syscalls: switch to generic syscallhdr.sh
  parisc: syscalls: switch to generic syscalltbl.sh

Pull arch/csky updates from Guo Ren:
 "Just cleanups"

* tag 'csky-for-linus-5.13-rc1' of git://github.com/c-sky/csky-linux:
  csky: uaccess.h: Coding convention with asm generic
  csky: fix syscache.c fallthrough warning
  csky: Fixup typos
  csky: Remove duplicate include in arch/csky/kernel/entry.S

Pull LED updates from Pavel Machek:
 "Nothing too exciting here, just some fixes"

* tag 'leds-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: pca9532: Assign gpio base dynamically
  leds: trigger: pattern: Switch to using the new API kobj_to_dev()
  leds: LEDS_BLINK_LGM should depend on X86
  leds: lgm: Fix spelling mistake "prepate" -> "prepare"
  MAINTAINERS: Remove Dan Murphy's bouncing email
  leds-lm3642: convert comma to semicolon
  leds: rt4505: Add support for Richtek RT4505 flash LED controller
  leds: rt4505: Add DT binding document for Richtek RT4505
  leds: Kconfig: LEDS_CLASS is usually selected.
  leds: lgm: Improve Kconfig help
  leds: lgm: fix gpiolib dependency

Pull RTC updates from Alexandre Belloni:
 "Mostly small fixes and two drivers gaining alarm support. Summary:

  Subsystem:

    - UIE emulation has been reworked to avoid calling driver callbacks
      when it is known it will not work

  Drivers:

   - ab-eoz9: add alarm support

   - pcf8523: add alarm support"

* tag 'rtc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (27 commits)
  rtc: sysfs: check features instead of ops
  rtc: omap: use rtc_write to access OMAP_RTC_OSC_REG
  rtc: s5m: Remove reference to parent's device pdata
  rtc: ds1307: Fix wday settings for rx8130
  rtc: pcf8523: report oscillator failures
  rtc: pcf8523: add alarm support
  rtc: pcf8523: remove useless define
  rtc: rtc_update_irq_enable: rework UIE emulation
  rtc: ds1307: remove flags
  rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARM
  rtc: imx-sc: remove .read_alarm
  rtc: ds1511: remove unused function
  rtc: fsl-ftm-alarm: add MODULE_TABLE()
  rtc: rtc-spear: replace spin_lock_irqsave by spin_lock in hard IRQ
  dt-bindings: rtc: qcom-pm8xxx-rtc: Add qcom pm8xxx rtc bindings
  rtc: pm8xxx: Add RTC support for PMIC PMK8350
  rtc: ab-eoz9: make use of RTC_FEATURE_ALARM
  rtc: ab-eoz9: add alarm support
  rtc: ab-eoz9: set regmap max_register
  rtc: pcf85063: fallback to parent of_node
  ...

Pull tracing updates from Steven Rostedt:
 "New feature:

   - A new "func-no-repeats" option in tracefs/options directory.

     When set the function tracer will detect if the current function
     being traced is the same as the previous one, and instead of
     recording it, it will keep track of the number of times that the
     function is repeated in a row. And when another function is
     recorded, it will write a new event that shows the function that
     repeated, the number of times it repeated and the time stamp of
     when the last repeated function occurred.

  Enhancements:

   - In order to implement the above "func-no-repeats" option, the ring
     buffer timestamp can now give the accurate timestamp of the event
     as it is being recorded, instead of having to record an absolute
     timestamp for all events. This helps the histogram code which no
     longer needs to waste ring buffer space.

   - New validation logic to make sure all trace events that access
     dereferenced pointers do so in a safe way, and will warn otherwise.

  Fixes:

   - No longer limit the PIDs of tasks that are recorded for
     "saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
     for a much larger range. This caused the mapping of PIDs to the
     task names to be dropped for all tasks with a PID greater than
     32768.

   - Change trace_clock_global() to never block. This caused a deadlock.

  Clean ups:

   - Typos, prototype fixes, and removing of duplicate or unused code.

   - Better management of ftrace_page allocations"

* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
  tracing: Restructure trace_clock_global() to never block
  tracing: Map all PIDs to command lines
  ftrace: Reuse the output of the function tracer for func_repeats
  tracing: Add "func_no_repeats" option for function tracing
  tracing: Unify the logic for function tracing options
  tracing: Add method for recording "func_repeats" events
  tracing: Add "last_func_repeats" to struct trace_array
  tracing: Define new ftrace event "func_repeats"
  tracing: Define static void trace_print_time()
  ftrace: Simplify the calculation of page number for ftrace_page->records some more
  ftrace: Store the order of pages allocated in ftrace_page
  tracing: Remove unused argument from "ring_buffer_time_stamp()
  tracing: Remove duplicate struct declaration in trace_events.h
  tracing: Update create_system_filter() kernel-doc comment
  tracing: A minor cleanup for create_system_filter()
  kernel: trace: Mundane typo fixes in the file trace_events_filter.c
  tracing: Fix various typos in comments
  scripts/recordmcount.pl: Make vim and emacs indent the same
  scripts/recordmcount.pl: Make indent spacing consistent
  tracing: Add a verifier to check string pointers for trace events
  ...

Pull another simple_recursive_removal() update from Al Viro:
 "I missed one case when simple_recursive_removal() was introduced"

* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qib_fs: switch to simple_recursive_removal()

Pull receive_fd update from Al Viro:
 "Cleanup of receive_fd mess"

* 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: split receive_fd_replace from __receive_fd

Signed-off-by: Helge Deller <deller@gmx.de>

Pull orangefs updates from Mike Marshall:
 "orangefs: implement orangefs_readahead

  mm/readahead.c/read_pages was quite a bit different back when I put my
  open-coded readahead logic into orangefs_readpage. That logic seemed
  to work as designed back then, it is a trainwreck now.

  This implements orangefs_readahead using the new xarray and
  readahead_expand features and removes all my open-coded readahead
  logic.

  This results in an extreme read performance improvement, these sample
  numbers are from my test VM:

  Here's an example of what's upstream in
  5.11.8-200.fc33.x86_64:

     30+0 records in
     30+0 records out
     125829120 bytes (126 MB, 120 MiB) copied, 5.77943 s, 21.8 MB/s

  And here's this version of orangefs_readahead on top of 5.12.0-rc4:

     30+0 records in
     30+0 records out
     125829120 bytes (126 MB, 120 MiB) copied, 0.325919 s, 386 MB/s

  There are four xfstest regressions with this patch. David Howells and
  Matthew Wilcox have been helping me work with this code"

* tag 'for-linus-5.13-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: leave files in the page cache for a few micro seconds at least
  Orangef: implement orangefs_readahead.

Pull misc vfs updates from Al Viro:
 "Assorted stuff all over the place"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  useful constants: struct qstr for ".."
  hostfs_open(): don't open-code file_dentry()
  whack-a-mole: kill strlen_user() (again)
  autofs: should_expire() argument is guaranteed to be positive
  apparmor:match_mn() - constify devpath argument
  buffer: a small optimization in grow_buffers
  get rid of autofs_getpath()
  constify dentry argument of dentry_path()/dentry_path_raw()

Pull exryptfs updates from Al Viro:
 "The interesting part here is (ecryptfs) lock_parent() fixes - its
  treatment of ->d_parent had been very wrong.

  The rest is trivial cleanups"

* 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ecryptfs: ecryptfs_dentry_info->crypt_stat is never used
  ecryptfs: get rid of unused accessors
  ecryptfs: saner API for lock_parent()
  ecryptfs: get rid of pointless dget/dput in ->symlink() and ->link()

Pull Landlock LSM from James Morris:
 "Add Landlock, a new LSM from Mickaël Salaün.

  Briefly, Landlock provides for unprivileged application sandboxing.

  From Mickaël's cover letter:
    "The goal of Landlock is to enable to restrict ambient rights (e.g.
     global filesystem access) for a set of processes. Because Landlock
     is a stackable LSM [1], it makes possible to create safe security
     sandboxes as new security layers in addition to the existing
     system-wide access-controls. This kind of sandbox is expected to
     help mitigate the security impact of bugs or unexpected/malicious
     behaviors in user-space applications. Landlock empowers any
     process, including unprivileged ones, to securely restrict
     themselves.

     Landlock is inspired by seccomp-bpf but instead of filtering
     syscalls and their raw arguments, a Landlock rule can restrict the
     use of kernel objects like file hierarchies, according to the
     kernel semantic. Landlock also takes inspiration from other OS
     sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
     Pledge/Unveil.

     In this current form, Landlock misses some access-control features.
     This enables to minimize this patch series and ease review. This
     series still addresses multiple use cases, especially with the
     combined use of seccomp-bpf: applications with built-in sandboxing,
     init systems, security sandbox tools and security-oriented APIs [2]"

  The cover letter and v34 posting is here:

      https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/

  See also:

      https://landlock.io/

  This code has had extensive design discussion and review over several
  years"

Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]

* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  landlock: Enable user space to infer supported features
  landlock: Add user and kernel documentation
  samples/landlock: Add a sandbox manager example
  selftests/landlock: Add user space tests
  landlock: Add syscall implementations
  arch: Wire up Landlock syscalls
  fs,security: Add sb_delete hook
  landlock: Support filesystem access-control
  LSM: Infrastructure management of the superblock
  landlock: Add ptrace restrictions
  landlock: Set up the security framework and manage credentials
  landlock: Add ruleset and domain management
  landlock: Add object management

Pull IMA updates from Mimi Zohar:
 "In addition to loading the kernel module signing key onto the builtin
  keyring, load it onto the IMA keyring as well.

  Also six trivial changes and bug fixes"

* tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies
  ima: Fix fall-through warnings for Clang
  integrity: Add declarations to init_once void arguments.
  ima: Fix function name error in comment.
  ima: enable loading of build time generated key on .ima keyring
  ima: enable signing of modules with build time generated key
  keys: cleanup build time module signing keys
  ima: Fix the error code for restoring the PCR value
  ima: without an IMA policy loaded, return quickly

Merge tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "perf stat:

   - Add support for hybrid PMUs to support systems such as Intel
     Alderlake and its BIG/little core/atom cpus.

   - Introduce 'bperf' to share hardware PMCs with BPF.

   - New --iostat option to collect and present IO stats on Intel
     hardware.

     This functionality is based on recently introduced sysfs attributes
     for Intel® Xeon® Scalable processor family (code name Skylake-SP)
     in commit bb42b3d3 ("perf/x86/intel/uncore: Expose an Uncore
     unit to IIO PMON mapping")

     It is intended to provide four I/O performance metrics in MB per
     each PCIe root port:

       - Inbound Read: I/O devices below root port read from the host memory
       - Inbound Write: I/O devices below root port write to the host memory
       - Outbound Read: CPU reads from I/O devices below root port
       - Outbound Write: CPU writes to I/O devices below root port

   - Align CSV output for summary.

   - Clarify --null use cases: Assess raw overhead of 'perf stat' or
     measure just wall clock time.

   - Improve readability of shadow stats.

  perf record:

   - Change the COMM when starting tha workload so that --exclude-perf
     doesn't seem to be not honoured.

   - Improve 'Workload failed' message printing events + what was
     exec'ed.

   - Fix cross-arch support for TIME_CONV.

  perf report:

   - Add option to disable raw event ordering.

   - Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.

   - Improvements to --stat output, that shows information about
     PERF_RECORD_ events.

   - Preserve identifier id in OCaml demangler.

  perf annotate:

   - Show full source location with 'l' hotkey in the 'perf annotate'
     TUI.

   - Add line number like in TUI and source location at EOL to the 'perf
     annotate' --stdio mode.

   - Add --demangle and --demangle-kernel to 'perf annotate'.

   - Allow configuring annotate.demangle{,_kernel} in 'perf config'.

   - Fix sample events lost in stdio mode.

  perf data:

   - Allow converting a perf.data file to JSON.

  libperf:

   - Add support for user space counter access.

   - Update topdown documentation to permit rdpmc calls.

  perf test:

   - Add 'perf test' for 'perf stat' CSV output.

   - Add 'perf test' entries to test the hybrid PMU support.

   - Cleanup 'perf test daemon' if its 'perf test' is interrupted.

   - Handle metric reuse in pmu-events parsing 'perf test' entry.

   - Add test for PE executable support.

   - Add timeout for wait for daemon start in its 'perf test' entries.

  Build:

   - Enable libtraceevent dynamic linking.

   - Improve feature detection output.

   - Fix caching of feature checks caching.

   - First round of updates for tools copies of kernel headers.

   - Enable warnings when compiling BPF programs.

  Vendor specific events:

   - Intel:
      - Add missing skylake & icelake model numbers.

   - arm64:
      - Add Hisi hip08 L1, L2 and L3 metrics.
      - Add Fujitsu A64FX PMU events.

   - PowerPC:
      - Initial JSON/events list for power10 platform.
      - Remove unsupported power9 metrics.

   - AMD:
      - Add Zen3 events.
      - Fix broken L2 Cache Hits from L2 HWPF metric.
      - Use lowercases for all the eventcodes and umasks.

  Hardware tracing:

   - arm64:
      - Update CoreSight ETM metadata format.
      - Fix bitmap for CS-ETM option.
      - Support PID tracing in config.
      - Detect pid in VMID for kernel running at EL2.

  Arch specific updates:

   - MIPS:
      - Support MIPS unwinding and dwarf-regs.
      - Generate mips syscalls_n64.c syscall table.

   - PowerPC:
      - Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
      - Support pipeline stage cycles for powerpc.

  libbeauty:

   - Fix fsconfig generator"

* tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (132 commits)
  perf build: Defer printing detected features to the end of all feature checks
  tools build: Allow deferring printing the results of feature detection
  perf build: Regenerate the FEATURE_DUMP file after extra feature checks
  perf session: Dump PERF_RECORD_TIME_CONV event
  perf session: Add swap operation for event TIME_CONV
  perf jit: Let convert_timestamp() to be backwards-compatible
  perf tools: Change fields type in perf_record_time_conv
  perf tools: Enable libtraceevent dynamic linking
  perf Documentation: Document intel-hybrid support
  perf tests: Skip 'perf stat metrics (shadow stat) test' for hybrid
  perf tests: Support 'Convert perf time to TSC' test for hybrid
  perf tests: Support 'Session topology' test for hybrid
  perf tests: Support 'Parse and process metrics' test for hybrid
  perf tests: Support 'Track with sched_switch' test for hybrid
  perf tests: Skip 'Setup struct perf_event_attr' test for hybrid
  perf tests: Add hybrid cases for 'Roundtrip evsel->name' test
  perf tests: Add hybrid cases for 'Parse event definition strings' test
  perf record: Uniquify hybrid event name
  perf stat: Warn group events from different hybrid PMU
  perf stat: Filter out unmatched aggregation for hybrid event
  ...

The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:

        kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)

This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).

What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in.  This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).

On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).

On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.

This means that:

 - a status fetch can access the target vnode either side of the exclusive
   section of the modification

 - the status fetch could start before the modification, yet finish after,
   and vice-versa.

 - the status fetch and the modification RPCs can complete in either order.

 - the status fetch can return either the before or the after DV from the
   modification.

 - the status fetch might regress the locally cached DV.

Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.

Fix this by the following means:

 (1) Keep track of when we're performing a modification operation on a
     vnode.  This is done by marking vnode parameters with a 'modification'
     note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
     for the duration.

 (2) Alter the speculation race detection to ignore speculative status
     fetches if either the vnode is marked as being modified or the data
     version number is not what we expected.

Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.

Fixes: a9e5c87c ("afs: Fix speculative status fetch going out of order wrt to modifications")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-and-reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/160605082531.252452.14708077925602709042.stgit@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/linux-fsdevel/161961335926.39335.2552653972195467566.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Improve scalability of DM's device hash by switching to rbtree

 - Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
   allow filtering based on name or UUID prefix.

 - Various small fixes for typos, warnings, unused function, or
   needlessly exported interfaces.

 - Remove needless request_queue NULL pointer checks in DM thin and
   cache targets.

 - Remove unnecessary loop in DM core's __split_and_process_bio().

 - Remove DM core's dm_vcalloc() and just use kvcalloc or kvmalloc_array
   instead (depending whether zeroing is useful).

 - Fix request-based DM's double free of blk_mq_tag_set in device remove
   after table load fails.

 - Improve DM persistent data performance on non-x86 by fixing packed
   structs to have a stated alignment. Also remove needless extra work
   from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
   that caused duplicate checksum calculation.

 - Fix missing goto in DM integrity's bitmap_flush_interval error
   handling.

 - Add "reset_recalculate" feature flag to DM integrity.

 - Improve DM integrity by leveraging discard support to avoid needless
   re-writing of metadata and also use discard support to improve hash
   recalculation.

 - Fix race with DM raid target's reshape and MD raid4/5/6 resync that
   resulted in inconsistant reshape state during table reloads.

 - Update DM raid target to temove unnecessary discard limits for raid0
   and raid10 now that MD has optimized discard handling for both raid
   levels.

* tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
  dm raid: remove unnecessary discard limits for raid0 and raid10
  dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
  dm integrity: use discard support when recalculating
  dm integrity: increase RECALC_SECTORS to improve recalculate speed
  dm integrity: don't re-write metadata if discarding same blocks
  dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
  dm raid: fix fall-through warning in rs_check_takeover() for Clang
  dm clone metadata: remove unused function
  dm integrity: fix missing goto in bitmap_flush_interval error handling
  dm: replace dm_vcalloc()
  dm space map common: fix division bug in sm_ll_find_free_block()
  dm persistent data: packed struct should have an aligned() attribute too
  dm btree spine: remove paranoid node_check call in node_prep_for_write()
  dm space map disk: remove redundant calls to sm_disk_get_nr_free()
  dm integrity: add the "reset_recalculate" feature flag
  dm persistent data: remove unused return from exit_shadow_spine()
  dm cache: remove needless request_queue NULL pointer checks
  dm thin: remove needless request_queue NULL pointer check
  dm: unexport dm_{get,put}_table_device
  dm ebs: fix a few typos
  ...

Pull kvm updates from Paolo Bonzini:
 "This is a large update by KVM standards, including AMD PSP (Platform
  Security Processor, aka "AMD Secure Technology") and ARM CoreSight
  (debug and trace) changes.

  ARM:

   - CoreSight: Add support for ETE and TRBE

   - Stage-2 isolation for the host kernel when running in protected
     mode

   - Guest SVE support when running in nVHE mode

   - Force W^X hypervisor mappings in nVHE mode

   - ITS save/restore for guests using direct injection with GICv4.1

   - nVHE panics now produce readable backtraces

   - Guest support for PTP using the ptp_kvm driver

   - Performance improvements in the S2 fault handler

  x86:

   - AMD PSP driver changes

   - Optimizations and cleanup of nested SVM code

   - AMD: Support for virtual SPEC_CTRL

   - Optimizations of the new MMU code: fast invalidation, zap under
     read lock, enable/disably dirty page logging under read lock

   - /dev/kvm API for AMD SEV live migration (guest API coming soon)

   - support SEV virtual machines sharing the same encryption context

   - support SGX in virtual machines

   - add a few more statistics

   - improved directed yield heuristics

   - Lots and lots of cleanups

  Generic:

   - Rework of MMU notifier interface, simplifying and optimizing the
     architecture-specific code

   - a handful of "Get rid of oprofile leftovers" patches

   - Some selftests improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
  KVM: selftests: Speed up set_memory_region_test
  selftests: kvm: Fix the check of return value
  KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
  KVM: SVM: Skip SEV cache flush if no ASIDs have been used
  KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
  KVM: SVM: Drop redundant svm_sev_enabled() helper
  KVM: SVM: Move SEV VMCB tracking allocation to sev.c
  KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
  KVM: SVM: Unconditionally invoke sev_hardware_teardown()
  KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
  KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
  KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
  KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
  KVM: SVM: Move SEV module params/variables to sev.c
  KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
  KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
  KVM: SVM: Zero out the VMCB array used to track SEV ASID association
  x86/sev: Drop redundant and potentially misleading 'sev_enabled'
  KVM: x86: Move reverse CPUID helpers to separate header file
  KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
  ...

Pull iommu updates from Joerg Roedel:

 - Big cleanup of almost unsused parts of the IOMMU API by Christoph
   Hellwig. This mostly affects the Freescale PAMU driver.

 - New IOMMU driver for Unisoc SOCs

 - ARM SMMU Updates from Will:
     - Drop vestigial PREFETCH_ADDR support (SMMUv3)
     - Elide TLB sync logic for empty gather (SMMUv3)
     - Fix "Service Failure Mode" handling (SMMUv3)
     - New Qualcomm compatible string (SMMUv2)

 - Removal of the AMD IOMMU performance counter writeable check on AMD.
   It caused long boot delays on some machines and is only needed to
   work around an errata on some older (possibly pre-production) chips.
   If someone is still hit by this hardware issue anyway the performance
   counters will just return 0.

 - Support for targeted invalidations in the AMD IOMMU driver. Before
   that the driver only invalidated a single 4k page or the whole IO/TLB
   for an address space. This has been extended now and is mostly useful
   for emulated AMD IOMMUs.

 - Several fixes for the Shared Virtual Memory support in the Intel VT-d
   driver

 - Mediatek drivers can now be built as modules

 - Re-introduction of the forcedac boot option which got lost when
   converting the Intel VT-d driver to the common dma-iommu
   implementation.

 - Extension of the IOMMU device registration interface and support
   iommu_ops to be const again when drivers are built as modules.

* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
  iommu: Streamline registration interface
  iommu: Statically set module owner
  iommu/mediatek-v1: Add error handle for mtk_iommu_probe
  iommu/mediatek-v1: Avoid build fail when build as module
  iommu/mediatek: Always enable the clk on resume
  iommu/fsl-pamu: Fix uninitialized variable warning
  iommu/vt-d: Force to flush iotlb before creating superpage
  iommu/amd: Put newline after closing bracket in warning
  iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
  iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
  iommu/amd: Remove performance counter pre-initialization test
  Revert "iommu/amd: Fix performance counter initialization"
  iommu/amd: Remove duplicate check of devid
  iommu/exynos: Remove unneeded local variable initialization
  iommu/amd: Page-specific invalidations for more than one page
  iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
  iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
  iommu/vt-d: Invalidate PASID cache when root/context entry changed
  iommu/vt-d: Remove WO permissions on second-level paging entries
  iommu/vt-d: Report the right page fault address
  ...

Pull rdma updates from Jason Gunthorpe:
 "This is significantly bug fixes and general cleanups. The noteworthy
  new features are fairly small:

   - XRC support for HNS and improves RQ operations

   - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
     and qib

   - Quite a few general cleanups on spelling, error handling, static
     checker detections, etc

   - Increase the number of device ports supported beyond 255. High port
     count software switches now exist

   - Several bug fixes for rtrs

   - mlx5 Device Memory support for host controlled atomics

   - Report SRQ tables through to rdma-tool"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
  IB/qib: Remove redundant assignment to ret
  RDMA/nldev: Add copy-on-fork attribute to get sys command
  RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
  RDMA/siw: Fix a use after free in siw_alloc_mr
  IB/hfi1: Remove redundant variable rcd
  RDMA/nldev: Add QP numbers to SRQ information
  RDMA/nldev: Return SRQ information
  RDMA/restrack: Add support to get resource tracking for SRQ
  RDMA/nldev: Return context information
  RDMA/core: Add CM to restrack after successful attachment to a device
  RDMA/cma: Skip device which doesn't support CM
  RDMA/rxe: Fix a bug in rxe_fill_ip_info()
  RDMA/mlx5: Expose private query port
  RDMA/mlx4: Remove an unused variable
  RDMA/mlx5: Fix type assignment for ICM DM
  IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
  RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
  RDMA/cxgb4: add missing qpid increment
  IB/ipoib: Remove unnecessary struct declaration
  RDMA/bnxt_re: Get rid of custom module reference counting
  ...

Pull ext4 updates from Ted Ts'o:
 "New features for ext4 this cycle include support for encrypted
  casefold, ensure that deleted file names are cleared in directory
  blocks by zeroing directory entries when they are unlinked or moved as
  part of a hash tree node split. We also improve the block allocator's
  performance on a freshly mounted file system by prefetching block
  bitmaps.

  There are also the usual cleanups and bug fixes, including fixing a
  page cache invalidation race when there is mixed buffered and direct
  I/O and the block size is less than page size, and allow the dax flag
  to be set and cleared on inline directories"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
  ext4: wipe ext4_dir_entry2 upon file deletion
  ext4: Fix occasional generic/418 failure
  fs: fix reporting supported extra file attributes for statx()
  ext4: allow the dax flag to be set and cleared on inline directories
  ext4: fix debug format string warning
  ext4: fix trailing whitespace
  ext4: fix various seppling typos
  ext4: fix error return code in ext4_fc_perform_commit()
  ext4: annotate data race in jbd2_journal_dirty_metadata()
  ext4: annotate data race in start_this_handle()
  ext4: fix ext4_error_err save negative errno into superblock
  ext4: fix error code in ext4_commit_super
  ext4: always panic when errors=panic is specified
  ext4: delete redundant uptodate check for buffer
  ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
  ext4: make prefetch_block_bitmaps default
  ext4: add proc files to monitor new structures
  ext4: improve cr 0 / cr 1 group scanning
  ext4: add MB_NUM_ORDERS macro
  ext4: add mballoc stats proc file
  ...

Pull dlm updates from David Teigland:
 "This includes more dlm networking cleanups and improvements for making
  dlm shutdowns more robust"

* tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: fix missing unlock on error in accept_from_sock()
  fs: dlm: add shutdown hook
  fs: dlm: flush swork on shutdown
  fs: dlm: remove unaligned memory access handling
  fs: dlm: check on minimum msglen size
  fs: dlm: simplify writequeue handling
  fs: dlm: use GFP_ZERO for page buffer
  fs: dlm: change allocation limits
  fs: dlm: add check if dlm is currently running
  fs: dlm: add errno handling to check callback
  fs: dlm: set subclass for othercon sock_mutex
  fs: dlm: set connected bit after accept
  fs: dlm: fix mark setting deadlock
  fs: dlm: fix debugfs dump

Pull fuse updates from Miklos Szeredi:

 - Fix a page locking bug in write (introduced in 2.6.26)

 - Allow sgid bit to be killed in setacl()

 - Miscellaneous fixes and cleanups

* tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  cuse: simplify refcount
  cuse: prevent clone
  virtiofs: fix userns
  virtiofs: remove useless function
  virtiofs: split requests that exceed virtqueue size
  virtiofs: fix memory leak in virtio_fs_probe()
  fuse: invalidate attrs when page writeback completes
  fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGID
  fuse: extend FUSE_SETXATTR request
  fuse: fix matching of FUSE_DEV_IOC_CLONE command
  fuse: fix a typo
  fuse: don't zero pages twice
  fuse: fix typo for fuse_conn.max_pages comment
  fuse: fix write deadlock

Pull overlayfs update from Miklos Szeredi:

 - Fix a regression introduced in 5.2 that resulted in valid overlayfs
   mounts being rejected with ELOOP (Too many levels of symbolic links)

 - Fix bugs found by various tools

 - Miscellaneous improvements and cleanups

* tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: add debug print to ovl_do_getxattr()
  ovl: invalidate readdir cache on changes to dir with origin
  ovl: allow upperdir inside lowerdir
  ovl: show "userxattr" in the mount data
  ovl: trivial typo fixes in the file inode.c
  ovl: fix misspellings using codespell tool
  ovl: do not copy attr several times
  ovl: remove ovl_map_dev_ino() return value
  ovl: fix error for ovl_fill_super()
  ovl: fix missing revert_creds() on error path
  ovl: fix leaked dentry
  ovl: restrict lower null uuid for "xino=auto"
  ovl: check that upperdir path is not on a read-only mount
  ovl: plumb through flush method

Merge misc updates from Andrew Morton:
 "A few misc subsystems and some of MM.

  175 patches.

  Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
  ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
  kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
  mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
  mm/memory-failure: unnecessary amount of unmapping
  mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
  mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
  net: page_pool: use alloc_pages_bulk in refill code path
  net: page_pool: refactor dma_map into own function page_pool_dma_map
  SUNRPC: refresh rq_pages using a bulk page allocator
  SUNRPC: set rq_page_end differently
  mm/page_alloc: inline __rmqueue_pcplist
  mm/page_alloc: optimize code layout for __alloc_pages_bulk
  mm/page_alloc: add an array-based interface to the bulk page allocator
  mm/page_alloc: add a bulk page allocator
  mm/page_alloc: rename alloced to allocated
  mm/page_alloc: duplicate include linux/vmalloc.h
  mm, page_alloc: avoid page_to_pfn() in move_freepages()
  mm/Kconfig: remove default DISCONTIGMEM_MANUAL
  mm: page_alloc: dump migrate-failed pages
  mm/mempolicy: fix mpol_misplaced kernel-doc
  mm/mempolicy: rewrite alloc_pages_vma documentation
  mm/mempolicy: rewrite alloc_pages documentation
  mm/mempolicy: rename alloc_pages_current to alloc_pages
  ...

Pull pin control updates from Linus Walleij:
 "There is a lot going on!

  Core changes:

   - A semantic change to handle pinmux and pinconf in explicit order
     while up until now we depended on the semantic order in the device
     tree. The device tree is a functional programming language and does
     not imply any order, so the right thing is for the pin control core
     to provide these semantics.

   - Add a new pinmux-select debugfs file which makes it possible to go
     in and select functions for a pin manually (iteratively, at the
     prompt) for debugging purposes.

   - Fixes to gpio regmap handling for a new pin control driver making
     use of regmap-gpio.

   - Use octal permissions on debugfs files.

  New drivers:

   - A massive rewrite of the former custom pin control driver for MIPS
     Broadcom devices to instead use the pin control subsystem. New pin
     control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
     BCM63268 and BCM6318 SoC variants are implemented.

   - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
     in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
     supported.

   - Support for the Rockchip RK3568/RK3566 pin controller.

   - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.

   - Support for Mediatek MTK8195.

   - Add a new Xilinx ZynqMP pin control driver.

  Driver improvements and non-urgent fixes:

   - Modularization and improvements of the Rockchip drivers.

   - Some new pins added to the description of new Renesas SoCs.

   - Clarifications of the GPIO base calculation in the Intel driver.

   - Fix the function names for the MPP54 and MPP55 pins in the Armada
     CP110 pin controller.

   - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.

   - Support for ACPI probing of the Qualcomm SC8180x.

   - Fix interrupt clear status on rockchip

   - Fix some missing pins on the Ingenic JZ4770, some semantic fixes
     for the behaviour of the Ingenic pin controller. Add DMIC pins for
     JZ4780, X1000, X1500 and X1830.

   - A slew of janitorial like of_node_put() calls"

* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: Add Xilinx ZynqMP pinctrl driver support
  firmware: xilinx: Add pinctrl support
  pinctrl: rockchip: do coding style for mux route struct
  pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
  pinctrl: Introduce MODE group in enum pin_config_param
  pinctrl: Keep enum pin_config_param ordered by name
  dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
  pinctrl: core: Fix kernel doc string for pin_get_name()
  pinctrl: mediatek: use spin lock in mtk_rmw
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add pinctrl driver on mt8195
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  pinctrl: Ingenic: Add pinctrl driver for X2000.
  pinctrl: Ingenic: Add pinctrl driver for JZ4775.
  pinctrl: Ingenic: Add pinctrl driver for JZ4755.
  pinctrl: Ingenic: Add pinctrl driver for JZ4750.
  pinctrl: Ingenic: Add pinctrl driver for JZ4730.
  dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
  pinctrl: Ingenic: Reformat the code.
  pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
  ...

Pull i2c updates from Wolfram Sang:

 - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit

 - bigger refactoring for the MPC driver

 - support for full software nodes - no need to work around with only
   properties anymore

 - we now have 'devm_i2c_add_adapter', too

 - sub-system wide fixes for the RPM refcounting problem which often
   caused a leak when an error was encountered during probe

 - the rest is usual driver updates and improvements

* 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
  i2c: mediatek: Fix wrong dma sync flag
  i2c: mediatek: Fix send master code at more than 1MHz
  i2c: sh7760: fix IRQ error path
  i2c: i801: Add support for Intel Alder Lake PCH-M
  i2c: core: Fix spacing error by checkpatch
  i2c: s3c2410: simplify getting of_device_id match data
  i2c: nomadik: Fix space errors
  i2c: iop3xx: Fix coding style issues
  i2c: amd8111: Fix coding style issues
  i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
  i2c: mpc: Use device_get_match_data() helper
  i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
  i2c: mpc: Use devm_clk_get_optional()
  i2c: mpc: Update license and copyright
  i2c: mpc: Interrupt driven transfer
  i2c: sh7760: add IRQ check
  i2c: rcar: add IRQ check
  i2c: mlxbf: add IRQ check
  i2c: jz4780: add IRQ check
  ...

Pull HID updates from Jiri Kosina:

 - Surface Aggregator Module support from Maximilian Luz

 - Apple Magic Mouse 2 support from John Chen

 - Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode
   from Hans de Goede

 - Thinkpad X1 Tablet keyboard support from Hans de Goede

 - Support for FTDI FT260 I2C host adapter from Michael Zaidman

 - other various small device-specific quirks, fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
  HID: wacom: Setup pen input capabilities to the targeted tools
  HID: hid-sensor-hub: Move 'hsdev' description to correct struct definition
  HID: hid-sensor-hub: Remove unused struct member 'quirks'
  HID: wacom_sys: Demote kernel-doc abuse
  HID: hid-sensor-custom: Remove unused variable 'ret'
  HID: hid-uclogic-params: Ensure function names are present and correct in kernel-doc headers
  HID: hid-uclogic-rdesc: Kernel-doc is for functions and structs
  HID: hid-logitech-hidpp: Fix conformant kernel-doc header and demote abuses
  HID: hid-picolcd_core: Remove unused variable 'ret'
  HID: hid-kye: Fix incorrect function name for kye_tablet_enable()
  HID: hid-core: Fix incorrect function name in header
  HID: hid-alps: Correct struct misnaming
  HID: usbhid: hid-pidff: Demote a couple kernel-doc abuses
  HID: usbhid: Repair a formatting issue in a struct description
  HID: hid-thrustmaster: Demote a bunch of kernel-doc abuses
  HID: input: map battery capacity (00850065)
  HID: magicmouse: fix reconnection of Magic Mouse 2
  HID: magicmouse: fix 3 button emulation of Mouse 2
  HID: magicmouse: add Apple Magic Mouse 2 support
  HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard
  ...

Pull sound updates from Takashi Iwai:
 "No surprises in this development cycle, and most of work is about the
  fixes and the improvements of the existing code, while a new LED
  control layer and a few new drivers have been introduced.

  Here are some highlights:

  Core:
   - A common mute-LED framework was introduced. It is used by HD-audio
     for now, more adaption will follow later. The former "Mic Mute-LED
     Mode" mixer control has been replaced with the corresponding sysfs
     now.
   - User-control management was changed to count consumed bytes instead
     of capping by number of elements; this will allow more controls in
     the normal usage pattern while avoiding the possible memory
     exhaustion DoS

  ASoC:
   - Continued refactoring and cleanups in ASoC core and generic card
     drivers
   - Wide range of small cppcheck and warning fixes
   - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
     accessory detection, and Realtek RT1019, RT1316, RT711 and RT715

  USB-audio:
   - Continued improvements and fixes of the implicit feedback mode,
     including better support for Pioneer and Roland/BOSS devices

  HD-audio:
   - Default back to non-buffer preallocation on x86
   - Cirrus codec improvements, more quirks for Realtek codecs

  Others:
   - New virtio sound driver
   - FireWire Bebob updates"

* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
  ALSA: hda/conexant: Re-order CX5066 quirk table entries
  ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
  ALSA: hda/realtek: Re-order ALC662 quirk table entries
  ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
  ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
  ALSA: usb-audio: Remove redundant assignment to len
  ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
  ALSA: virtio: fix kernel-doc
  ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  ALSA: sb: Fix two use after free in snd_sb_qsound_build
  ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
  ...

Pull more drm updates from Dave Airlie:
 "Looks like I missed a tegra feature request for next, but should still
  be fine since it's pretty self contained.

  Apart from that got a set of i915 and amdgpu fixes as per usual along
  with a few misc fixes.

  tegra:
   - Tegra186 hardware cursor support
   - better capability reporting for different SoC
   - better framebuffer modifier support
   - host1x fixes

  ttm:
   - fix unswappable BO handling

  efifb:
   - check for PCI before using it

  amdgpu:
   - Fixes for Aldebaran
   - Display LTTPR fixes
   - eDP fixes
   - Fixes for Vangogh
   - RAS fixes
   - ASPM support
   - Renoir SMU fixes
   - Modifier fixes
   - Misc code cleanups
   - Freesync fixes

  i915:
   - Several fixes to GLK handling in recent display refactoring
   - Rare watchdog timer race fix
   - Cppcheck redundant condition fix
   - Overlay error code propagation fix
   - Documentation fix
   - gvt: Remove one unused function warning
   - gvt: Fix intel_gvt_init_device() return type
   - gvt: Remove one duplicated register accessible check"

* tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits)
  efifb: Check efifb_pci_dev before using it
  drm/i915: Fix docbook descriptions for i915_gem_shrinker
  drm/i915: fix an error code in intel_overlay_do_put_image()
  drm/i915/display/psr: Fix cppcheck warnings
  drm/i915: Disable LTTPR detection on GLK once again
  drm/i915: Restore lost glk ccs w/a
  drm/i915: Restore lost glk FBC 16bpp w/a
  drm/i915: Take request reference before arming the watchdog timer
  drm/ttm: fix error handling if no BO can be swapped out v4
  drm/i915/gvt: Remove duplicated register accessible check
  drm/amdgpu/gmc9: remove dummy read workaround for newer chips
  drm/amdgpu: Add mem sync flag for IB allocated by SA
  drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
  drm/amdgpu: Reset RAS error count and status regs
  Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"
  drm/amd/display: 3.2.132
  drm/amd/display: [FW Promotion] Release 0.0.62
  drm/amd/display: add helper for enabling mst stream features
  drm/amd/display: Report Proper Quantization Range in AVI Infoframe
  drm/amd/display: Fix call to pass bpp in 16ths of a bit
  ...

Pull module updates from Jessica Yu:
 "Fix an age old bug involving jump_calls and static_labels when
  CONFIG_MODULE_UNLOAD=n.

  When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
  normally the __exit sections of a module are not loaded at all.
  However, dynamic code patching (jump_label, static_call, alternatives)
  can have sites in __exit sections even if __exit is never executed.

  Reported by Peter Zijlstra:
     'Alternatives, jump_labels and static_call all can have relocations
      into __exit code. Not loading it at all would be BAD.'

  Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
  and discard them after init"

* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...

Pull Xtensa updates from Max Filippov:

 - switch to generic syscall generation scripts

 - new GDBIO implementation for xtensa semihosting interface

 - various small code fixes and cleanups

 - a few typo fixes in comments and Kconfig help text

* tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: add GDBIO implementation to semihosting interface
  xtensa: ISS: split simcall implementation from semihosting interface
  xtensa: simcall.h: Change compitible to compatible
  xtensa: Couple of typo fixes
  xtensa: drop extraneous register load from initialize_mmu
  xtensa: fix pgprot_noncached assumptions
  xtensa: simplify coherent_kvaddr logic
  xtensa: syscalls: switch to generic syscallhdr.sh
  xtensa: syscalls: switch to generic syscalltbl.sh
  xtensa: stop filling syscall array with sys_ni_syscall
  xtensa: remove unneeded export in boot-elf/Makefile
  xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig
  xtensa: fix warning comparing pointer to 0
  xtensa: fix spelling mistake in Kconfig "wont" -> "won't"

Commit 29efc390 ("md/md0: optimize raid0 discard handling") and
commit d30588b2 ("md/raid10: improve raid10 discard request")
remove MD raid0's and raid10's inability to properly handle large
discards. So eliminate associated constraints from dm-raid's support.

Depends-on: 29efc390 ("md/md0: optimize raid0 discard handling")
Depends-on: d30588b2 ("md/raid10: improve raid10 discard request")
Reported-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>