- 28 Feb, 2024 18 commits
-
-
Kai-Heng Feng authored
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C 'Connection Parameter Update Procedure Invalid Parameters Central Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0] That was revoled by commit c49a8682 ("Bluetooth: validate BLE connection interval updates"), but later got reverted due to devices like keyboards and mice may require low connection interval. So only validate the max value connection interval to pass the Test Suite, and let devices to request low connection interval if needed. [0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869 Fixes: 68d19d7d ("Revert "Bluetooth: validate BLE connection interval updates"") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
If we received HCI_EV_IO_CAPA_REQUEST while HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote does support SSP since otherwise this event shouldn't be generated. Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+9UdG1cMZVmdtN3U2aS16AKMCyTARZZyFX7xTEDWcMOw@mail.gmail.com/T/#t Fixes: c7f59461 ("Bluetooth: Fix a refcnt underflow problem for hci_conn") Signed-off-by:
-
Frédéric Danis authored
LIMITED_DISCOVERABLE flag is not reset from Class of Device and advertisement on limited discoverable timeout. This prevents to pass PTS test GAP/DISC/LIMM/BV-02-C Calling set_discoverable_sync as when the limited discovery is set correctly update the Class of Device and advertisement. Signed-off-by:
Frédéric Danis <frederic.danis@collabora.com> Signed-off-by:
-
Zijun Hu authored
hci_store_wake_reason() wrongly parses event HCI_Connection_Request as HCI_Connection_Complete and HCI_Connection_Complete as HCI_Connection_Request, so causes recording wakeup BD_ADDR error and potential stability issue, fix it by using the correct field. Fixes: 2f20216c ("Bluetooth: Emit controller suspend and resume events") Signed-off-by:
Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by:
-
Yuxuan Hu authored
During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx. Signed-off-by:
Yuxuan Hu <20373622@buaa.edu.cn> Signed-off-by:
-
Luiz Augusto von Dentz authored
During suspend, only wakeable devices can be in acceptlist, so if the device was previously added it needs to be removed otherwise the device can end up waking up the system prematurely. Fixes: 3b420553 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan") Signed-off-by:
Clancy Shang <clancy.shang@quectel.com> Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de>
-
Ying Hsu authored
While handling the HCI_EV_HARDWARE_ERROR event, if the underlying BT controller is not responding, the GPIO reset mechanism would free the hci_dev and lead to a use-after-free in hci_error_reset. Here's the call trace observed on a ChromeOS device with Intel AX201: queue_work_on+0x3e/0x6c __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>] ? init_wait_entry+0x31/0x31 __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>] hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>] process_one_work+0x1d8/0x33f worker_thread+0x21b/0x373 kthread+0x13a/0x152 ? pr_cont_work+0x54/0x54 ? kthread_blkcg+0x31/0x31 ret_from_fork+0x1f/0x30 This patch holds the reference count on the hci_dev while processing a HCI_EV_HARDWARE_ERROR event to avoid potential crash. Fixes: c7741d16 ("Bluetooth: Perform a power cycle when receiving hardware error event") Signed-off-by:Ying Hsu <yinghsu@chromium.org> Signed-off-by:
-
Jonas Dreßler authored
There's a very confusing mistake in the code starting a HCI inquiry: We're calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag() checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's set on hdev->flags, not on hdev->dev_flags though. HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here. The mistake is only present in the synchronous code for starting an inquiry, not in the async one. Also devices are typically bondable while doing an inquiry, so that might be the reason why nobody noticed it so far. Fixes: abfeea47 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by:
Jonas Dreßler <verdre@v0yd.nl> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Johan Hovold authored
A recent commit restored the original (and still documented) semantics for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address is considered invalid unless an address is provided by firmware. This specifically means that this flag must only be set for devices with invalid addresses, but the Broadcom BCM4377 driver has so far been setting this flag unconditionally. Fortunately the driver already checks for invalid addresses during setup and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address is invalid but can be overridden by firmware (long term, this should probably just always be allowed). Fixes: 6945795b ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org # 6.5 Reported-by:
Felix Zhang <mrman@mrman314.tech> Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reported-by:
Neal Gompa <neal@gompa.dev> Signed-off-by:
-
Haiyue Wang authored
The fast path usage breakdown describes the detail for 'inet_sock', fix the markup title. Signed-off-by:
Haiyue Wang <haiyue.wang@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Raczynski authored
Currently when suspending driver and stopping workqueue it is checked whether workqueue is not NULL and if so, it is destroyed. Function destroy_workqueue() does drain queue and does clear variable, but it does not set workqueue variable to NULL. This can cause kernel/module panic if code attempts to clear workqueue that was not initialized. This scenario is possible when resuming suspended driver in stmmac_resume(), because there is no handling for failed stmmac_hw_setup(), which can fail and return if DMA engine has failed to initialize, and workqueue is initialized after DMA engine. Should DMA engine fail to initialize, resume will proceed normally, but interface won't work and TX queue will eventually timeout, causing 'Reset adapter' error. This then does destroy workqueue during reset process. And since workqueue is initialized after DMA engine and can be skipped, it will cause kernel/module panic. To secure against this possible crash, set workqueue variable to NULL when destroying workqueue. Log/backtrace from crash goes as follows: [88.031977]------------[ cut here ]------------ [88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out [88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398 <Skipping backtrace for watchdog timeout> [88.032251]---[ end trace e70de432e4d5c2c0 ]--- [88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter. [88.036359]------------[ cut here ]------------ [88.036519]Call trace: [88.036523] flush_workqueue+0x3e4/0x430 [88.036528] drain_workqueue+0xc4/0x160 [88.036533] destroy_workqueue+0x40/0x270 [88.036537] stmmac_fpe_stop_wq+0x4c/0x70 [88.036541] stmmac_release+0x278/0x280 [88.036546] __dev_close_many+0xcc/0x158 [88.036551] dev_close_many+0xbc/0x190 [88.036555] dev_close.part.0+0x70/0xc0 [88.036560] dev_close+0x24/0x30 [88.036564] stmmac_service_task+0x110/0x140 [88.036569] process_one_work+0x1d8/0x4a0 [88.036573] worker_thread+0x54/0x408 [88.036578] kthread+0x164/0x170 [88.036583] ret_from_fork+0x10/0x20 [88.036588]---[ end trace e70de432e4d5c2c1 ]--- [88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by:Jakub Raczynski <j.raczynski@samsung.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Lukasz Majewski authored
Correct type in the hsr_forward_do() comment. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
-
Randy Dunlap authored
In a previous patch I added "select PHYLIB" at the wrong place for the ADIN1110 driver symbol, so move it to its correct place under the ADIN1110 kconfig symbol. Fixes: a9f80df4 ("net: ethernet: adi: requires PHYLIB support") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3 Cc: Lennart Franzen <lennart@lfdomain.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: Nuno Sa <nuno.sa@analog.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.8-rc7 Few remaining fixes, hopefully the last wireless pull request to v6.8. Two fixes to the stack and two to iwlwifi but no high priority fixes this time. * tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: only call drv_sta_rc_update for uploaded stations MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files MAINTAINERS: wifi: update Jeff Johnson e-mail address wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices wifi: iwlwifi: mvm: ensure offloading TID queue exists wifi: nl80211: reject iftype change with mesh ID change ==================== Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Justin Iurman authored
Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY IANA allocation for IOAM", while RFC 9486 is available for some time now. Just update the reference. Fixes: 9ee11f0f ("ipv6: ioam: Data plane support for Pre-allocated Trace") Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Reviewed-by:
-
Oleksij Rempel authored
Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12 ("lan78xx: Introduce NAPI polling support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.deSigned-off-by:
-
Kurt Kanzenbach authored
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash: |[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 |[...] |[ 255.822764] Call trace: |[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38 The program counter indicates xsk_tx_metadata_complete(). It works on compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to missing meta data. Therefore, call xsk_tx_metadata_complete() only when meta data is actually used. Tested on imx93 without XDP, with XDP and with XDP/ZC. Fixes: 1347b419 ("net: stmmac: Add Tx HWTS support to XDP ZC") Suggested-by:
Serge Semin <fancer.lancer@gmail.com> Tested-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.deSigned-off-by:
-
Javier Carrasco authored
The MII code does not check the return value of mdio_read (among others), and therefore no error code should be sent. A previous fix to the use of an uninitialized variable propagates negative error codes, that might lead to wrong operations by the MII library. An example of such issues is the use of mii_nway_restart by the dm9601 driver. The mii_nway_restart function does not check the value returned by mdio_read, which in this case might be a negative number which could contain the exact bit the function checks (BMCR_ANENABLE = 0x1000). Return zero in case of error, as it is common practice in users of mdio_read to avoid wrong uses of the return value. Fixes: 8f8abb86 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.comSigned-off-by:
-
- 27 Feb, 2024 18 commits
-
-
Jakub Kicinski authored
struct veth_rq is pretty large, 832B total without debug options enabled. Since commit under Fixes we try to pre-allocate enough queues for every possible CPU. Miao Wang reports that this may lead to order-5 allocations which will fail in production. Let the allocation fallback to vmalloc() and try harder. These are the same flags we pass to netdev queue allocation. Reported-and-tested-by:
Miao Wang <shankerwangmiao@gmail.com> Fixes: 9d3684c2 ("veth: create by default nr_possible_cpus queues") Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Shannon Nelson says: ==================== ionic: PCI error handling fixes These are a few things to make our PCI reset handling better. ==================== Link: https://lore.kernel.org/r/20240223222742.13923-1-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
When rebuilding the lif after an FLR, be sure to restore the current netdev features, not do the usual first time feature init. This prevents losing user changes to things like TSO or vlan tagging states. Fixes: 45b84188 ("ionic: keep filters across FLR") Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
-
Shannon Nelson authored
Since we now have potential cases of NULL cmd_regs and info_regs during a reset recovery, and left NULL if a reset recovery has failed, we need to check that they exist before we use them. Most of the cases were covered in the original patch where we verify before doing the ioreadb() for health or cmd status. However, we need to protect a few uses of io mem that could be hit in error recovery or asynchronous threads calls as well (e.g. ethtool or devlink handlers). Fixes: 219e1832 ("ionic: no fw read when PCI reset failed") Reviewed-by:
-
Shannon Nelson authored
AER recovery handler can trigger a PCI Reset after tearing down the device setup in the error detection handler. The PCI Reset handler will also attempt to tear down the device setup, and this second tear down needs to know that it doesn't need to call pci_release_regions() a second time. We can clear num_bars on tear down and use that to decide later if we need to clear the resources. This prevents a harmless but disturbing warning message resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX> Fixes: c3a910e1 ("ionic: fill out pci error handlers") Reviewed-by: -
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more misc. fixes for v6.8 This series includes 6 types of fixes: - Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM, when asking to delete a subflow. It was done everywhere else, but not there. Patch 2 validates the modification, thanks to a subtest in mptcp_join.sh. These patches can be backported up to v5.19. - Patch 3 is a small fix for a recent bug-fix patch, just to avoid printing an irrelevant warning (pr_warn()) once. It can be backported up to v5.6, alongside the bug-fix that has been introduced in the v6.8-rc5. - Patches 4 to 6 are fixes for bugs found by Paolo while working on TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the performances in some cases. Patches can be backported up to v5.6, v5.11 and v6.7 respectively. - Patch 7 makes sure 'ss -M' is available when starting MPTCP Join selftest as it is required for some subtests since v5.18. - Patch 8 fixes a possible double-free on socket dismantle. The issue always existed, but was unnoticed because it was not causing any problem so far. This fix can be backported up to v5.6. - Patch 9 is a fix for a very recent patch causing lockdep warnings in subflow diag. The patch causing the regression -- which fixes another issue present since v5.7 -- should be part of the future v6.8-rc6. Patch 10 validates the modification, thanks to a new subtest in diag.sh. ==================== Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.orgSigned-off-by:
-
Paolo Abeni authored
The mptcp diag interface already experienced a few locking bugs that lockdep and appropriate coverage have detected in advance. Let's add a test-case triggering the relevant code path, to prevent similar issues in the future. Be careful to cope with very slow environments. Note that we don't need an explicit timeout on the mptcp_connect subprocess to cope with eventual bug/hang-up as the final cleanup terminating the child processes will take care of that. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385d #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping any extended info for the mptcp subflow listener: nothing actually useful is presented there. Fixes: b8adb69a ("mptcp: fix lockless access in subflow ULP diag") Cc: stable@vger.kernel.org Reported-by:
-
Davide Caratti authored
when MPTCP server accepts an incoming connection, it clones its listener socket. However, the pointer to 'inet_opt' for the new socket has the same value as the original one: as a consequence, on program exit it's possible to observe the following splat: BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0 Free of addr ffff888485950880 by task swapper/25/0 CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 print_report+0xca/0x620 kasan_report_invalid_free+0x64/0x90 __kasan_slab_free+0x1aa/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 rcu_do_batch+0x34e/0xd90 rcu_core+0x559/0xac0 __do_softirq+0x183/0x5a4 irq_exit_rcu+0x12d/0x170 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:cpuidle_enter_state+0x175/0x300 Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000 RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588 RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080 R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0 R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80 cpuidle_enter+0x4a/0xa0 do_idle+0x310/0x410 cpu_startup_entry+0x51/0x60 start_secondary+0x211/0x270 secondary_startup_64_no_verify+0x184/0x18b </TASK> Allocated by task 6853: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 __kmalloc+0x1eb/0x450 cipso_v4_sock_setattr+0x96/0x360 netlbl_sock_setattr+0x132/0x1f0 selinux_netlbl_socket_post_create+0x6c/0x110 selinux_socket_post_create+0x37b/0x7f0 security_socket_post_create+0x63/0xb0 __sock_create+0x305/0x450 __sys_socket_create.part.23+0xbd/0x130 __sys_socket+0x37/0xb0 __x64_sys_socket+0x6f/0xb0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 6858: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x12c/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 subflow_ulp_release+0x1f0/0x250 tcp_cleanup_ulp+0x6e/0x110 tcp_v4_destroy_sock+0x5a/0x3a0 inet_csk_destroy_sock+0x135/0x390 tcp_fin+0x416/0x5c0 tcp_data_queue+0x1bc8/0x4310 tcp_rcv_state_process+0x15a3/0x47b0 tcp_v4_do_rcv+0x2c1/0x990 tcp_v4_rcv+0x41fb/0x5ed0 ip_protocol_deliver_rcu+0x6d/0x9f0 ip_local_deliver_finish+0x278/0x360 ip_local_deliver+0x182/0x2c0 ip_rcv+0xb5/0x1c0 __netif_receive_skb_one_core+0x16e/0x1b0 process_backlog+0x1e3/0x650 __napi_poll+0xa6/0x500 net_rx_action+0x740/0xbb0 __do_softirq+0x183/0x5a4 The buggy address belongs to the object at ffff888485950880 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888485950880, ffff8884859508c0) The buggy address belongs to the physical page: page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950 flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006 raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix this by duplicating IP / IPv6 options after clone, so that ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice. Fixes: cf7da0d6 ("mptcp: Create SUBFLOW socket for incoming connections") Cc: stable@vger.kernel.org Signed-off-by:Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Geliang Tang authored
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP sockets. So it must be checked if ss tool supports MPTCP in this script. Fixes: e274f715 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
-
Paolo Abeni authored
After the blamed commit below, the send buffer auto-tuning can happen after that the mptcp_propagate_sndbuf() completes - via the delegated action infrastructure. We must check for write space even after such change or we risk missing the wake-up event. Fixes: 8005184f ("mptcp: refactor sndbuf auto-tuning") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
Such value should be inherited from the first subflow, but passive sockets always used 'rsk_rcv_wnd'. Fixes: 6f8a612a ("mptcp: keep track of advertised windows right edge") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
when inserting not contiguous data in the subflow write queue, the protocol creates a new skb and prevent the TCP stack from merging it later with already queued skbs by setting the EOR marker. Still no push flag is explicitly set at the end of previous GSO packet, making the aggregation on the receiver side sub-optimal - and packetdrill self-tests less predictable. Explicitly mark the end of not contiguous DSS with the push flag. Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts (NGI0) authored
After the 'Fixes' commit mentioned below, the client side might print the following warning once when a subflow is fully established at the reception of any valid additional ack: MPTCP: bogus mpc option on established client sk That's a normal situation, and no warning should be printed for that. We can then skip the check when the label is used. Fixes: e4a0fa47 ("mptcp: corner case locking for rx path fields initialization") Cc: stable@vger.kernel.org Suggested-by:
-
Geliang Tang authored
Now both a v4 address and a v4-mapped address are supported when destroying a userspace pm subflow, this patch adds a second subflow to "userspace pm add & remove address" test, and two subflows could be removed two different ways, one with the v4mapped and one with v4. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 48d73f60 ("selftests: mptcp: update userspace pm addr tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Geliang Tang authored
Address family of server side mismatches with that of client side, like in "userspace pm add & remove address" test: userspace_pm_add_addr $ns1 10.0.2.1 10 userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED That's because on the server side, the family is set to AF_INET6 and the v4 address is mapped in a v6 one. This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before checking local address family with remote address family, map an IPv4 address to an IPv6 address if the pair is a v4-mapped address. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Signed-off-by: -
Eric Dumazet authored
This fixes a possible UAF in if_nlmsg_size(), which can run without RTNL. Add rcu protection to "struct dpll_pin" Move netdev_dpll_pin() from netdevice.h to dpll.h to decrease name pollution. Note: This looks possible to no longer acquire RTNL in netdev_dpll_pin_assign() later in net-next. v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko) Fixes: 5f184269 ("netdev: expose DPLL pin handle for netdevice") Signed-off-by:
-
Oleksij Rempel authored
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a1 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by:
-
- 26 Feb, 2024 3 commits
-
-
Eric Dumazet authored
It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount. Fixes: 6ecf4c37 ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Test that we keep GRO flag in sync when XDP is disabled while the device is closed. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths. Fixes: d3256efd ("veth: allow enabling NAPI even without XDP") Reported-by:
Thomas Gleixner <tglx@linutronix.de> Reported-by: syzbot+039399a9b96297ddedca@syzkaller.appspotmail.com Signed-off-by:
-
- 24 Feb, 2024 1 commit
-
-
Yunjian Wang authored
When a queue(tfile) is detached, we only update tfile's queue_index, but do not update xdp_rxq_info's queue_index. This patch fixes it. Fixes: 8bf5c4ee ("tun: setup xdp_rxq_info") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Link: https://lore.kernel.org/r/1708398727-46308-1-git-send-email-wangyunjian@huawei.comSigned-off-by:
-
