- 26 May, 2015 1 commit
-
-
Takashi Iwai authored
Add missing prefix to make some local data static. Spotted by sparse: sound/drivers/dummy.c:159:20: warning: symbol 'model_emu10k1' was not declared. Should it be static? sound/drivers/dummy.c:165:20: warning: symbol 'model_rme9652' was not declared. Should it be static? .... Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
- 24 May, 2015 5 commits
-
-
Takashi Sakamoto authored
This device is based on DM1000E, and BeBoB version 1 firmware is installed. $ cat /proc/asound/cards 0 [Pro ]: BeBoB - Mbox 2 Pro DIGIDESIGN Mbox 2 Pro (id:1, rev:1), GUID 00a07e0100a90000 at fw1.0, S400 $ cat /proc/asound/Pro/firewire/firmware Manufacturer: bridgeCo Protocol Ver: 1 Build Ver: 0 GUID: 0x00A07E0100A90000 Model ID: 0x01 Model Rev: 1 Firmware Date: 20071031 Firmware Time: 034402 Firmware ID: 0xA9 Firmware Ver: 16777215 Base Addr: 0x20080000 Max Size: 1572864 Loader Date: 20051207 Loader Time: 205554 With this patch, ALSA BeBoB driver can start packet streaming to/from this model, while as a default, internal multiplexer of this model is not initialized and generates no sound even if the driver transfers any packets with PCM samples. To hear any sounds from this model, userspace applications should be developed to set parameters to the internal multiplexer. You can see raw information in FFADO website: http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
When detecting zero in 'dbs' field of CIP header, this packet streaming should be aborted because of avoiding division-by-zero. This is an error in an aspect of IEC 61883-1, thus protocol error. This commit use EPROTO instead of EIO. Actually, the returned value is not used for userspace and this commit has no effect. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Sakamoto authored
When detecting invalid value in 'dbs' field of CIP header or packet discontinuity, current implementation reports the status by err_info(). In most cases this state is caused by model-specific issue due to vendor's customization and should be reported to developers. This commit use dev_err() instead of dev_info() for this purpose. In the cases, packet streaming is aborted, thus no message floading occurs. Signed-off-by:
-
Takashi Sakamoto authored
Some macros include my misunderstanding for IEC 61883-1 or -6. Additionally, some fixed values appear on codes. This commit replaces these with macros with proper names. Signed-off-by:
-
Takashi Sakamoto authored
The naming rule for local functions was inconsistent. This commit rename them with a consistent manner. Signed-off-by:
-
- 23 May, 2015 5 commits
-
-
Takashi Sakamoto authored
Former patches allow non-blocking streams to synchronize with timestamp. This patch removes the restriction. Signed-off-by:
-
Takashi Sakamoto authored
In previous commit, error handling for incoming packet processing is outside of packetization. This is nice for reading the codes. This commit applies this idea for outgoing packet processing, too. Signed-off-by:
-
Takashi Sakamoto authored
Current implementation reuses the value of syt field in incoming packet to outgoing packet for full duplex timestamp synchronization, while the number of data blocks in outgoing packets refers to hard-coded table and the synchronization cannot be applied to non-blocking stream. This commit passes the number of data blocks from incoming packet processing to outgoing packet processing for the synchronization. For normal mode, isochronous callback handler is changed to generate the values of syt and data blocks. Signed-off-by:
-
Takashi Sakamoto authored
This function is called according to conditions between the value of syt and streaming mode(blocking or non-blocking). To simplify caller's work, this commit push these conditions to the function. Signed-off-by:
-
Takashi Sakamoto authored
In IEC 61883-6, the number of data blocks in a packet is limited up to the value of SYT_INTERVAL. Current implementation is compliant to the limitation, while it can cause buffer-over-run when the value of dbs field in received packet is illegally large. This commit adds a validator to detect such illegal packets to prevent the buffer-over-run. Actually, the buffer is aligned to the size of memory page, thus this issue hardly causes system errors due to the room to page alignment, as long as a few packets includes such jumbo payload; i.e. a packet to several received packets. Here, Behringer F-Control Audio 202 (based on OXFW 960) has a quirk to postpone transferring isochronous packet till finish handling any asynchronous packets. In this case, this model is lazy, transfers no packets according to several cycle-start packets. After finishing, this model pushes required data in next isochronous packet. As a result, the packet include more data blocks than IEC 61883-6 defines. To continue to support this model, this commit adds a new flag to extend the length of calculated payload. This flag allows the size of payload 5 times as large as IEC 61883-6 defines. As a result, packets from this model passed the validator successfully. Signed-off-by:
-
- 22 May, 2015 3 commits
-
-
Takashi Iwai authored
-
Russell King authored
Add a helper to create the IEC958 channel status from an ALSA snd_pcm_runtime structure, taking account of the sample rate and sample size. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Reviwed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Russell King authored
Add a helper for the EDID like data structure, which is typically passed from a HDMI adapter to its associated audio driver. This informs the audio driver of the capabilities of the attached HDMI sink. Signed-off-by:
-
- 21 May, 2015 1 commit
-
-
Takashi Iwai authored
The jack interface is statically included in sound core. Having doubly module information is rather confusing. Signed-off-by:
-
- 20 May, 2015 1 commit
-
-
Mengdong Lin authored
The file is moved to hda core and renamed to hdac_i915.c, so can be used by both legacy HDA driver and new Skylake audio driver. - Add snd_hdac_ prefix to the public APIs. - The i915 audio component is moved to core bus and dynamically allocated. - A static pointer hdac_acomp is used to help bind/unbind callbacks to get this component, because the sound card's private_data is used by the azx chip pointer, which is a legacy structure. It could be removed if private _data changes to some core structure which can be extended to find the bus. - snd_hdac_get_display_clk() is added to get the display core clock for HSW/BDW. - haswell_set_bclk() is moved to hda_intel.c because it needs to write the controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW. - Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have different layout for the extended mode registers. Signed-off-by:
Mengdong Lin <mengdong.lin@intel.com> Signed-off-by:
-
- 19 May, 2015 4 commits
-
-
Takashi Iwai authored
The CA0132 DSP loader leads to NULL deference since the recent transition to HDA core code, as it unconditionally accesses hdac_stream->substream->runtime. For DSP loading, the substream shouldn't be assigned. This patch addresses the NULL dereference above in addition to assure the substream is cleared while DSP loading. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98151Signed-off-by:
-
Takashi Iwai authored
Added missing model entries and updated the codec names. Signed-off-by: -
Takashi Iwai authored
Modern machines tend to have only one headset jack nowadays, and they often need these quirks. Let's allow them applicable via model option for ease of debugging. Signed-off-by: -
Gabriele Martino authored
This patch adds quirks detection to the Creative CA0132 codec, and the quirk for Alienware 15 (2015). Some quirks may need different pin configuration, so the relevant compile-time configuration has been removed. The pin configuration and related initialization verbs are generated at runtime instead, in ca0132_config() and ca0132_prepare_verbs(). Signed-off-by:
Gabriele Martino <g.martino@gmx.com> Signed-off-by:
-
- 18 May, 2015 16 commits
-
-
Wolfram Sang authored
As we now have deferred probing, we can use a custom mechanism and finally get rid of this legacy interface from the i2c core. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Tested-by:
Dan DeVoto <dand1972@yahoo.com> Tested-by:
Mark Elliott <txlitebeer@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
while building with allyesconfig it was giving a build warning about unused variable. declare the variable only if the driver is built as a module. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Libin Yang authored
This patch creates hda_intel_trace.h to add some pm trace functions used in hda_intel.c Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Libin Yang authored
This patch does: 1. Rename the hda_intel_trace.h to hda_controller_trace.h as this trace is used in hda_controller.c 2. Add some trace function for pcm flow. Signed-off-by:
-
Libin Yang authored
Add the trace of snd_hdac_stream_start and snd_hdac_stream_stop. Signed-off-by:
-
Thierry Reding authored
Tegra210 contains a similar codec as Tegra124 and can be supported using the same patch function. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
Tegra114 contains the same codec as Tegra124 and can be supported using the same patch function. Signed-off-by:
-
Thierry Reding authored
Tegra30 contains the same codec as Tegra124 and can be supported using the same patch function. Signed-off-by:
-
Thierry Reding authored
When probing, provide accurate error messages to help with debugging failures. Signed-off-by:
-
Thierry Reding authored
The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on the MCP or GPU variants. The highest bit in the vendor-defined scratch registers can be used to trigger an interrupt in the HDMI codec, which is signalled to the HDMI driver. This can be used to pass information, such as the HDA format, to the HDMI driver so that it can reconfigure itself accordingly. While at it, change the name of the codec to Tegra124 since there are no other SoCs in the Tegra12x family. There isn't really a Tegra12x family. Signed-off-by:
-
Thierry Reding authored
This is set for the MCP variants of the NVIDIA HDA controller, which the Tegra variant was derived from. This fixes the following warning at boot time: [ 2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0 Signed-off-by:
-
Kailang Yang authored
Dell create new platform with ALC298 codec. This patch will enable headset mode for ALC298/ALC3266 platform. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Takashi Iwai authored
It's no longer a part of API but merely a local function. Signed-off-by: -
Takashi Iwai authored
Just a minor refactoring, no functional changes. Signed-off-by: -
Takashi Iwai authored
The commit [c560a679: ALSA: core: Remove child proc file elements recursively] converted snd_card_proc_new() with the normal snd_info_*() call and removed snd_device chain for such info entries. However, it misses one point: the creation of the proc entry was managed by snd_device chain in the former code, and now it's also gone, which results in no proc files creation at all. Mea culpa. This patch makes snd_info_card_register() creating the all pending child proc entries in a shot. Also, since snd_card_register() might be called multiple times, this function is also changed to be callable multiple times. Along with the changes above, now the linked list of snd_info_entry is added at creation time instead of snd_info_register() for keeping eyes of pending info entries. Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively') Reported-by:
"Lu, Han" <han.lu@intel.com> Signed-off-by:
-
Takashi Iwai authored
snd_info_free_entry() releases the all children nodes as well, but due to the wrong timing of releasing the link, the children nodes may be disconnected but left unreleased. This patch fixes it by moving the link free at the right position. Also it eases list_for_each_entry() without _safe option in snd_info_disconnect() because it no longer frees the children nodes there. Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively') Signed-off-by:
-
- 12 May, 2015 1 commit
-
-
Kailang Yang authored
Support headset mode for ALC298 platform. Signed-off-by:
-
- 11 May, 2015 1 commit
-
-
David Henningsson authored
Janitorial patch (no functional change) Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
- 05 May, 2015 2 commits
-
-
Thierry Reding authored
Commit a41d1224 ("ALSA: hda - Embed bus into controller object") introduced a regression in the Tegra HDA driver that causes the following oops during boot: [ 2.333458] Unable to handle kernel NULL pointer dereference at virtual address 000004c4 [ 2.341537] pgd = c0004000 [ 2.344312] [000004c4] *pgd=00000000 [ 2.347898] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 2.353200] Modules linked in: [ 2.356264] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc2-next-20150505-00344-g8577890defbf #79 [ 2.366682] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.372939] task: ee0d8b40 ti: ee0da000 task.ti: ee0da000 [ 2.378336] PC is at azx_bus_init+0x18/0xf4 [ 2.382516] LR is at hda_tegra_probe+0x6c/0x478 [ 2.387043] pc : [<c06156c4>] lr : [<c061cf00>] psr: 60000113 [ 2.387043] sp : ee0dbe38 ip : 00000000 fp : 00000000 [ 2.398501] r10: ed874c00 r9 : 000000fd r8 : 00000000 [ 2.403717] r7 : ed874c10 r6 : 00000000 r5 : 00000000 r4 : ed016810 [ 2.410232] r3 : c08a2ad4 r2 : c08a1ea0 r1 : 00000000 r0 : ed016810 [ 2.416750] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.424046] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.429783] Process swapper/0 (pid: 1, stack limit = 0xee0da210) [ 2.435778] Stack: (0xee0dbe38 to 0xee0dc000) [ 2.440129] be20: 00000000 ed016810 [ 2.448297] be40: 00000000 c061cf00 00000000 ee0dbe5c ed8735d0 c0a7bc48 ed02fd50 ed016000 [ 2.456462] be60: c1250164 ed874c10 c0c66bf8 fffffdfb 00000000 000000fd c0b8dc98 c046664c [ 2.464628] be80: c0466608 c1250164 ed874c10 00000000 c0c66bf8 c0464eb4 ed874c10 c0c66bf8 [ 2.472793] bea0: ed874c44 c0c43458 00000000 c04650d0 00000000 c0c66bf8 c046503c c04633b4 [ 2.480959] bec0: ee11bea4 ed85f390 c0c66bf8 ed017ac0 00000000 c0464634 c0ab2b7c c0c66bf8 [ 2.489125] bee0: c0bfde20 c0c66bf8 c0bfde20 ed01ce40 c0b7b414 c04656e8 c04665b0 c0bfde20 [ 2.497291] bf00: c0bfde20 c0009770 ee0d8b40 c0c02488 60000113 00000000 00000000 00000003 [ 2.505458] bf20: 00000000 c0c02488 60000113 00000000 c0b54598 c0b16a90 ef7fcc57 c0041228 [ 2.513624] bf40: c0a9150c ef7fcc5f 00000006 00000006 00000000 c0bf1fa8 c0bf2354 00000006 [ 2.521790] bf60: c0b8dc90 c0c7c000 c0c7c000 c0b8dc98 00000000 c0b54dd8 00000006 00000006 [ 2.529956] bf80: c0b54598 00000000 00000000 c07ff08c 00000000 00000000 00000000 00000000 [ 2.538122] bfa0: 00000000 c07ff094 00000000 c000f5a0 00000000 00000000 00000000 00000000 [ 2.546286] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.554451] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 fffff7ff c013f264 [ 2.562624] [<c06156c4>] (azx_bus_init) from [<c061cf00>] (hda_tegra_probe+0x6c/0x478) [ 2.570535] [<c061cf00>] (hda_tegra_probe) from [<c046664c>] (platform_drv_probe+0x44/0xa4) [ 2.578879] [<c046664c>] (platform_drv_probe) from [<c0464eb4>] (driver_probe_device+0x174/0x2b8) [ 2.587739] [<c0464eb4>] (driver_probe_device) from [<c04650d0>] (__driver_attach+0x94/0x98) [ 2.596172] [<c04650d0>] (__driver_attach) from [<c04633b4>] (bus_for_each_dev+0x6c/0xa0) [ 2.604342] [<c04633b4>] (bus_for_each_dev) from [<c0464634>] (bus_add_driver+0x148/0x1f0) [ 2.612597] [<c0464634>] (bus_add_driver) from [<c04656e8>] (driver_register+0x78/0xf8) [ 2.620593] [<c04656e8>] (driver_register) from [<c0009770>] (do_one_initcall+0x8c/0x1d4) [ 2.628765] [<c0009770>] (do_one_initcall) from [<c0b54dd8>] (kernel_init_freeable+0x144/0x1e4) [ 2.637459] [<c0b54dd8>] (kernel_init_freeable) from [<c07ff094>] (kernel_init+0x8/0xe8) [ 2.645543] [<c07ff094>] (kernel_init) from [<c000f5a0>] (ret_from_fork+0x14/0x34) This is caused by azx_bus_init() trying to dereference chip->card, which for the Tegra driver doesn't get initialized until sometime later during the call to hda_tegra_create(). Fix this by mimicking the behaviour of the Intel driver and defer HDA bus initialization until right before the call to snd_device_new(). Fixes: a41d1224 ('ALSA: hda - Embed bus into controller object') Signed-off-by:
-
Lu, Han authored
In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells, so it's necessary to reset display audio codecs when power well on, otherwise display audio codecs will disappear when resume from low power state. Reset steps when power on: enable codec wakeup -> azx_init_chip() -> disable codec wakeup The callback for codec wakeup enable/disable is in drivers/gpu/drm/i915/. Signed-off-by:
-
