This commit is the second part of the encapsulated signals feature.
It contains the driver support for submission of cs with encapsulated
signals and the wait for them.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The signaling from within encapsulated OP capability is merged into the
existing stream architecture, such that one can trigger multiple
signaling from an encapsulated op, according to the time the event
was done in the graph execution and avoid the need to wait for the
whole encapsulated OP execution to be complete before the stream can
signal.

This commit implements only the reserve/unreserve part.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Currently the SOB reset was in fence release function which happens
only at the CS wraparound during the CS allocation time.

In order to support the new encapsulated signals reservation feature,
we need to move the SOB reset to an earlier phase because this SOB
could reach it's max value very fast using the signal reservation.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When user sends multiple CSs, waiting for each CS is not efficient
as it involves many user-kernel context switches.

In order to address this issue we add support to "wait on multiple CSs"
using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is
defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL.

The input parameters for this uAPI will be:
@seq: user pointer to an array of up to 32 CS's sequence numbers.
@seq_array_len: length of sequence array.
@timeout_us: timeout for waiting for any CS.

The output paramateres for this API will be:
@status: multi CS ioctl completion status (dedicated status was added as
         well).
@flags: bitmap of output flags of the CS.
@cs_completion_map: bitmap for multi CS, if CS sequence that was placed
                    in index N in input seq array has completed- the N-th
		    bit in cs_completion_map will be 1, otherwise it will
		    be 0.
@timestamp_nsec: timestamp of the first completed CS
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

To add proper support for wait-for-multi-CS, locking the CS lock
for each CS fence in the list is not efficient.

Instead, this patch add support to lock the CS lock once to get all
required fences.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The driver quietly handles memory mappings that were not freed so no
need to print a warning about that when user closes the FD.

Accordingly, revise the text that is printed in case the device is
still in use after the user process closed the FD.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Need to initialize f/w Linux loaded indication to false to prevent
wrong communication with the f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add two new fields regarding interrupts communication between driver
and f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

There is a scenario where an ongoing soft reset would race with an
ongoing heartbeat routine, eventually causing heartbeat to fail and
thus to escalate into a hard reset.

With this fix, soft-reset procedure will disable heartbeat CPU messages
and flush the (ongoing) current one before continuing with reset code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Print the SM name instead of index because it is more informational for
the user to know the SM name instead of id when a SM interrupt occurs.

In addition, the index that is printed is of the SOB group, not
a specific SOB.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

State dump is relevant to the user in case of Sync Manager error, so
we need to trigger it in that case as well.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This is required from any device that is capable to perform DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Each ASIC can have a different offset to add to a host dma address,
to enable the ASIC to access that host memory.

The usage for this can be common code so add this to the asic
property structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Recently, the size parameter in userptr structure was change to u64.
As a result, we need to change the type of the local range_size
in device_va_to_pa() to u64 to avoid overflow.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If hard reset fails after the call to hw_fini and before loading the
linux image to the device, a subsequent call to hw_fini should
communicate via COMMS (or MSG_TO_CPU regs for old FW versions).
However, the driver still tries in this case to communicate via the GIC,
and thus no hard reset is actually done.
To avoid that, the patch clears the linux_loaded flag after every call
to hw_fini.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In case of host-resident MMU, when the page tables pool is destroyed,
its pointer is not nullified correctly.
As a result, on a device fini which happens after a failing reset, the
already destroyed pool is accessed, which leads to a kernel panic.
The patch fixes the setting of the pool pointer to NULL.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This function will be used for more mmap operations than just
mmaping CBs.
Signed-off-by: Zvika Yehudai <zyehudai@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

missing mutex unlock once driver is giving up killing user processes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

At the first stage, only gaudi core dump shall be implemented, not
including the status registers.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

With the infrastructure in place, monitors and fences dump shall be
implemented.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

To improve the user's ability to debug the case where a workload that
is part of executing training/inference of a topology is getting stuck,
we need to add a 'core dump' each time a CS times-out. The 'core dump'
shall contain all relevant Sync Manager information and corresponding
fence values.

The most recent dumps shall be accessible via debugfs, under
'state_dump' node. Reading from the node will provide the oldest dump
available. Writing an integer value X will discard X dumps, starting
with the oldest one, i.e. subsequent read will now return newer
dumps.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The previous function we used, find_get_pid(), wasn't good in case
the user process was run inside docker.

As a result, we didn't had the PID and we couldn't kill the user
process in case the device got stuck and we needed to reset the
device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Sometimes we may need to disable optimization of using huge pages
in our memory management code. Add such a flag to the function that
creates the list of physical pages that would be programmed into the
device MMU.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Increase the size variable in the userptr structure to 64-bit. That
variable describes the size of the memory allocation of the user that
is now being mapped into the device. The mapping can be larger than
4GB, so we need to support it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Same as we handle it in the regular wait for CS, we need to handle the
case where the waiting for user interrupt was interrupted. In that case,
we need to return correct error code to the user.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In device fini there was missing a call to release all pending user
interrupts. That can cause a process to be stuck inside the driver's
IOCTL of wait for interrupts, in case the device is removed or
simulator is killed at the same time.

In addition, also call to remove inactive codec job was missing.

Moreover, to prevent such errors in the future (where code is added
to reset path but not to device fini), we moved some common parts
to two dedicated functions:
cleanup_resources
take_release_locks
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In case user interrupt arrived but the completion value is less than
the target value, we want to retry the wait.

However, before the retry we must reinitialize the completion object,
under spin-lock, so the wait function won't exit immediately because
the completion object is already completed (from the previous
interrupt).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

We don't use typedefs so the enum name shouldn't end with _t
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update recent changes made in firmware header files, which contain
a minor COMMS protocol change and new error status definitions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

A new user flag is required to make memory map hint mandatory, in
contrast to the current situation where it is best effort.
This is due to the requirement to map certain data to specific
pre-determined device virtual address ranges.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add support for pre-determined driver-reserved device VA address ranges.
This is needed for future ASIC support where some contents must be
mapped into these pre-determined ranges because the H/W will be
configured using these ranges.

In case the user asks to map a VA without a hint address, avoid
allocating the device VA from the reserved ranges.

Make sure the validation checks of the hint address take into account
situation where the DRAM page size is not pow of 2.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This reverts commit 0092a1e3

This should be reverted in the char-misc-next branch to make merging
with Linus's branch possible due to issues with the mhi code that was
found in the networking tree.

Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpadReported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: Hemant Kumar <hemantk@codeaurora.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add again dev_set_drvdata(), but this time in devm_pvpanic_probe(), in order
for dev_get_drvdata() to not return NULL.

Fixes: 394febc9 ("misc/pvpanic: Make 'pvpanic_probe()' resource managed")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/1629385946-4584-2-git-send-email-mihai.carabas@oracle.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I got a NULL pointer dereference report when doing fuzz test:

Call Trace:
  qp_release_pages+0xae/0x130
  qp_host_unregister_user_memory.isra.25+0x2d/0x80
  vmci_qp_broker_unmap+0x191/0x320
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  vmci_host_unlocked_ioctl+0x59f/0xd50
  ? do_vfs_ioctl+0x14b/0xa10
  ? tomoyo_file_ioctl+0x28/0x30
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  __x64_sys_ioctl+0xea/0x120
  do_syscall_64+0x34/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.

vmci_host_unlocked_ioctl
  vmci_host_do_alloc_queuepair
    vmci_qp_broker_alloc
      qp_broker_alloc
        qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;

When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.

Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.

Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.

Fixes: 06164d2b ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unneeded variables when "0" can be returned.

Generated by: scripts/coccinelle/misc/returnvar.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Link: https://lore.kernel.org/r/20210820021752.10927-1-jing.yangyang@zte.com.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.15-rc1

- Core has updates to support SoundWire mockup device (includes tag from
  asoc), improved error handling and slave status.

- Drivers has update on Intel driver for new quriks and better handling of
  errors and suspend routines

* tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  soundwire: cadence: override PDI configurations to create loopback
  soundwire: cadence: add debugfs interface for PDI loopbacks
  soundwire: stream: don't program mockup device ports
  soundwire: bus: squelch error returned by mockup devices
  soundwire: add flag to ignore all command/control for mockup devices
  soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
  soundwire: cadence: add paranoid check on self-clearing bits
  soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15
  soundwire: bus: update Slave status in sdw_clear_slave_status
  soundwire: cadence: Remove ret variable from sdw_cdns_irq()
  soundwire: bus: filter out more -EDATA errors on clock stop
  soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values
  ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
  ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
  ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
  ASoC: codecs: add SoundWire mockup device support

Merge tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.15

  - Updates:
        - Yaml conversion for Freescale imx8mq usb phy, TI AM654 SERDES phy,
          Cadence torrent phy
        - Updates for Amlogic Meson8b-usb2 phy, Samsung ufs phy

  - New support:
        - UFS phy for Qualcomm SM6115
	- PCIe & USB/DP phy for Qualcomm sc8180x
	- USB3 PHY support for Qualcomm IPQ6018
	- Renesas USB2.0 PHY for RZ/G2L

* tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (45 commits)
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  phy: xilinx: zynqmp: skip PHY initialization and PLL lock for USB
  phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
  phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode
  phy: phy-mtk-mipi-dsi: convert to devm_platform_ioremap_resource
  phy: phy-mtk-mipi-dsi: remove dummy assignment of error number
  phy: phy-mtk-hdmi: convert to devm_platform_ioremap_resource
  phy: phy-mtk-ufs: use clock bulk to get clocks
  phy: phy-mtk-tphy: remove error log of ioremap failure
  phy: phy-mtk-tphy: print error log using child device
  phy: phy-mtk-tphy: support type switch by pericfg
  phy: phy-mtk-tphy: use clock bulk to get clocks
  dt-bindings: phy: mediatek: tphy: support type switch by pericfg
  phy: cadence-torrent: Check PIPE mode PHY status to be ready for operation
  phy: cadence-torrent: Add debug information for PHY configuration
  phy: cadence-torrent: Add separate functions for reusable code
  phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clock
  phy: cadence-torrent: Add PHY registers for DP in array format
  ...

Merge tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.15

Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.

Framework change:
- Add sanity check to detect if node is already added to provider.

Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  interconnect: qcom: osm-l3: Use driver-specific naming
  interconnect: qcom: osm-l3: Add sc8180x support
  dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding
  interconnect: qcom: Add SC8180x providers
  dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings
  interconnect: Sanity check that node isn't already on list
  interconnect: qcom: icc-rpmh: Consolidate probe functions

We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>