Pull "Reset controller changes for v4.14" from Philipp Zabel:

- constify zx2967 reset_ops
- add a convenience API to manage an array of resets
- let deassert report success and let assert report success for shared resets
  if the reset controller driver does not implement (de)assert.
- add HSDKv1 reset driver
- remove Gemini reset controller, the driver is made obsolete
  by a combined clock/reset driver in drivers/clk
- fix the total number of reset lines in the sunxi driver
- various uniphier updates and fixes:
  - remove sLD3 SoC support
  - simplify system reset register and bit definitions
  - add audio systems, video input subsystem, and analog amplifiers reset
    controls

* tag 'reset-for-4.14' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  reset: uniphier: add audio systems reset control
  reset: sunxi: fix number of reset lines
  reset: uniphier: do not use per-SoC macro for system reset block
  reset: uniphier: remove sLD3 SoC support
  Revert "reset: Add a Gemini reset controller"
  ARC: reset: introduce HSDKv1 reset driver
  reset: make (de)assert report success for self-deasserting reset drivers
  reset: Add APIs to manage array of resets
  reset: zx2967: constify zx2967_reset_ops.

Merge tag 'tegra-for-4.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "firmare: Changes for v4.14-rc1" from Thierry Reding:

This contains a single bug fix that can lead to a crash in some rare
situations. Since this has never been reported to happen with the level
of support that exists upstream, this isn't considered critical.

* tag 'tegra-for-4.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: set drvdata earlier

Merge tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "soc/tegra: Changes for v4.14-rc1" from Thierry Reding:

Contains a fix for unbalanced reference counting of device tree nodes in
the PMC-based generic power domains code.

A second change moves the SoC device registration code from its old
location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be
shared between 32-bit and 64-bit ARM Tegra SoCs.

* tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: Register SoC device
  soc/tegra: Fix bad of_node_put() in powergate init

Pull "arm: mediatek: soc updates for v4.14" from Matthias Brugger:

- add mt7623a smp support
- scpsys: reduce code duplication
- scpsys: add mt7622 support
- pmic wrapper: make of_device_ids constant

* tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek:
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  soc: mtk-pmic-wrap: make of_device_ids const.
  ARM: mediatek: add MT7623a smp bringup code

Move this code from arch/arm/mach-tegra and make it common among 32-bit
and 64-bit Tegra SoCs. This is slightly complicated by the fact that on
32-bit Tegra, the SoC device is used as the parent for all devices that
are instantiated from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Subdevices of bpmp, such as bpmp-i2c, require the bpmp device's
drvdata to be set during their probe. Currently this is not always the
case. Fix this by calling platform_set_drvdata() earlier during bpmp's
probe.
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers

Pull "Amlogic driver updates for v4.14" from Kevin Hilman:

- add SoC info driver

* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: Add Amlogic SoC Information driver
  dt-bindings: arm: amlogic: Add SoC information bindings

Merge tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman:

Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers
- SoC identification
- System controller
- Reset controller

* tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-rst: Add support for R-Car D3
  soc: renesas: rcar-sysc: Add support for R-Car D3 power areas
  soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions
  soc: renesas: Identify R-Car D3

Merge tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Pull "Qualcomm ARM Based Driver Updates for v4.14" from Andy Gross:

* Minor fixes for SMSM and WCNSS_CTRL
* Move Qcom SoC drivers to submenu
* Fix mdt_loader to use request_firmware_into_buf()

* tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  soc: qcom: mdt_loader: Use request_firmware_into_buf()
  soc: qcom: bring all qcom drivers into a submenu
  soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE()
  soc: qcom: smsm: fix of_node refcnting problem

Merge tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers

Pull "Rockchip driver changes for 4.14" from Heiko Stübner:

Powerdomain support for rk3366 and disabling of the automatic
jtag/sdmmc switching for rk3328.

* tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: power-domain: add power domain support for rk3366
  dt-bindings: add binding for rk3366 power domains
  dt-bindings: power: add RK3366 SoCs header for power-domain
  soc: rockchip: disable jtag switching for RK3328 Soc

Merge tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers

Pull "Small fixes and enhancements for the TEE subsystem" from Jens Wiklander:

* tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: optee: sync with new naming of interrupts
  tee: indicate privileged dev in gen_caps
  tee: optee: interruptible RPC sleep
  tee: optee: add const to tee_driver_ops and tee_desc structures
  tee: tee_shm: Constify dma_buf_ops structures.
  tee: add forward declaration for struct device
  tee: optee: fix uninitialized symbol 'parg'

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add SCPSYS power domain driver for MT7622 SoC having four power domains
which are respectively ETHSYS for Ethernet including embedded switch,
WBSYS for WIFI and Bluetooth, HIF0SYS for PCI-E and SATA, and HIF1SYS for
USB. Those functions could be selectively powered gated when the
corresponding function is no longer to use in order to reach more minimal
power dissipation.
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add relevant header files required for dt-bindings of SCPSYS power domain
control for all subsystems found on MT7622 SoC.
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Reduce code duplication of scpsys_probe_mtXXXX across all SoCs using
the more generic scpsys_probe all covering all cases to avoid starting
to bloat the driver when more MediaTek SoCs supported are added.
Suggested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Update the binding document for enabling SCPSYS on MediaTek MT7622 SoC.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add a reset line for analog signal amplifier core (ADAMV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add a reset line for video input subsystem (EXIV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add reset lines for audio subsystem (AIO) and
SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

The Allwinner reset controller has 32-bit registers, but resource_size
is measured in bytes, not number of registers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Chen-Yu Tsai <wens@csie.org>

This macro turned out not so useful as I had expected.

Hardware engineers said they would change reset bit assignments for
every SoC going forward.  This means we can not share the macros
among SoCs.  Just use primitive macros.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

This SoC is too old.  It is difficult to maintain any longer.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

By switching to the request_firmware_into_buf() we load the segment data
straight into the preallocated buffers, reducing the need for allocating
scratch buffers for these. In particular the modem firmware consists of
multiple segments in the range 5-15MB, making this worth while.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

As the number of qcom drivers increase, entries in SOC menu looks
scattered with other SOC drivers. Make a submenu for Qcom drivers
to make it visibly clear while selecting qcom SOC specific drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This fixes a problem of wifi module not loading on db410c.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

of_find_node_with_property() drops the reference to the 'from' node,
which eventually (after enough -EPROBE_DEFERs) drops the last reference
to the node causing all sorts of fun problems, and this nice splat.

  BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:747
  in_atomic(): 1, irqs_disabled(): 128, pid: 33, name: kworker/0:1
  4 locks held by kworker/0:1/33:
   #0:  ("events"){.+.+.+}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728
   #1:  (deferred_probe_work){+.+.+.}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728
   #2:  (&dev->mutex){......}, at: [<ffff000008676078>] __device_attach+0x30/0x168
   #3:  (devtree_lock){......}, at: [<ffff000008828fd0>] of_find_node_with_property+0x30/0xe0
  irq event stamp: 18976
  hardirqs last  enabled at (18975): [<ffff00000815794c>] __down_trylock_console_sem+0x74/0xb8
  hardirqs last disabled at (18976): [<ffff0000089e26d4>] _raw_spin_lock_irqsave+0x2c/0x78
  softirqs last  enabled at (16880): [<ffff0000080e0f00>] __do_softirq+0x580/0x640
  softirqs last disabled at (16871): [<ffff0000080e13a4>] irq_exit+0xe4/0x138
  CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G            E   4.12.0-rc5+ #1455
  Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017
  Workqueue: events deferred_probe_work_func
  Call trace:
  [<ffff000008089ee0>] dump_backtrace+0x0/0x230
  [<ffff00000808a134>] show_stack+0x24/0x30
  [<ffff0000084e1944>] dump_stack+0xac/0xe8
  [<ffff00000810d7e0>] ___might_sleep+0x150/0x230
  [<ffff00000810d918>] __might_sleep+0x58/0x90
  [<ffff0000089dde18>] __mutex_lock+0x50/0x870
  [<ffff0000089de674>] mutex_lock_nested+0x3c/0x50
  [<ffff000008388ae0>] kernfs_remove+0x30/0x50
  [<ffff00000838b720>] sysfs_remove_dir+0x58/0x70
  [<ffff0000084e393c>] kobject_del+0x1c/0x58
  [<ffff0000084e374c>] kobject_put+0xb4/0x208
  [<ffff00000882c364>] of_node_put+0x24/0x30
  [<ffff000008829018>] of_find_node_with_property+0x78/0xe0
  [<ffff000000aff5f4>] qcom_smsm_probe+0x194/0x720 [smsm]
  [<ffff0000086793b4>] platform_drv_probe+0x74/0x110
  [<ffff0000086765bc>] driver_probe_device+0x2b4/0x420
  [<ffff000008676920>] __device_attach_driver+0xd0/0x150
  [<ffff000008673e78>] bus_for_each_drv+0x68/0xa8
  [<ffff00000867611c>] __device_attach+0xd4/0x168
  [<ffff000008676a1c>] device_initial_probe+0x24/0x30
  [<ffff000008675380>] bus_probe_device+0xa0/0xa8
  [<ffff000008675948>] deferred_probe_work_func+0xb8/0xf8
  [<ffff0000080fa9d4>] process_one_work+0x25c/0x728
  [<ffff0000080faef4>] worker_thread+0x54/0x3d8
  [<ffff0000081031d8>] kthread+0x110/0x140
  [<ffff000008082d90>] ret_from_fork+0x10/0x40
  OF: ERROR: Bad of_node_put() on /smsm
  CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G        W   E   4.12.0-rc5+ #1455
  Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017
  Workqueue: events deferred_probe_work_func
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This reverts commit 2acb037f.

We ended up merging the reset controller into the clock
controller so we can now get rid of this stand-alone
implementation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Pull x86 platform driver fix from Darren Hart:
 "Fix loop preventing some platforms from waking up via the power button
  in s2idle:

   - intel-vbtn: match power button on press rather than release"

* tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: intel-vbtn: match power button on press rather than release

Pull ext4 fixes from Ted Ts'o:
 "A large number of ext4 bug fixes and cleanups for v4.13"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix copy paste error in ext4_swap_extents()
  ext4: fix overflow caused by missing cast in ext4_resize_fs()
  ext4, project: expand inode extra size if possible
  ext4: cleanup ext4_expand_extra_isize_ea()
  ext4: restructure ext4_expand_extra_isize
  ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize
  ext4: make xattr inode reads faster
  ext4: inplace xattr block update fails to deduplicate blocks
  ext4: remove unused mode parameter
  ext4: fix warning about stack corruption
  ext4: fix dir_nlink behaviour
  ext4: silence array overflow warning
  ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
  ext4: release discard bio after sending discard commands
  ext4: convert swap_inode_data() over to use swap() on most of the fields
  ext4: error should be cleared if ea_inode isn't added to the cache
  ext4: Don't clear SGID when inheriting ACLs
  ext4: preserve i_mode if __ext4_set_acl() fails
  ext4: remove unused metadata accounting variables
  ext4: correct comment references to ext4_ext_direct_IO()

Pull MIPS fixes from Ralf Baechle:
 "This fixes two build issues for ralink platforms, both due to missing
  #includes which used to be included indirectly via other headers"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: ralink: mt7620: Add missing header
  MIPS: ralink: Fix build error due to missing header

The latest change of compat_sys_sigpending in commit 8f13621a
("sigpending(): move compat to native") has broken it in two ways.

First, it tries to write 4 bytes more than userspace expects:
sizeof(old_sigset_t) == sizeof(long) == 8 instead of
sizeof(compat_old_sigset_t) == sizeof(u32) == 4.

Second, on big endian architectures these bytes are being written in the
wrong order.

This bug was found by strace test suite.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Fixes: 8f13621a ("sigpending(): move compat to native")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This bug was found by a static code checker tool for copy paste
problems.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

On a 32-bit platform, the value of n_blcoks_count may be wrong during
the file system is resized to size larger than 2^32 blocks.  This may
caused the superblock being corrupted with zero blocks count.

Fixes: 1c6bd717Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.7+

When upgrading from old format, try to set project id
to old file first time, it will return EOVERFLOW, but if
that file is dirtied(touch etc), changing project id will
be allowed, this might be confusing for users, we could
try to expand @i_extra_isize here too.
Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer.
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Wang Shilong <wshilong@ddn.com>

Current ext4_expand_extra_isize just tries to expand extra isize, if
someone is holding xattr lock or some check fails, it will give up.
So rename its name to ext4_try_to_expand_extra_isize.

Besides that, we clean up unnecessary check and move some relative checks
into it.
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Wang Shilong <wshilong@ddn.com>