- 09 Mar, 2018 31 commits
-
-
Juergen Gross authored
commit 71c208dd upstream. Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit d9c10e5b upstream. Commit e864f395 "fs: add RWF_DSYNC aand RWF_SYNC" added additional way for direct IO to become synchronous and thus trigger fsync from the IO completion handler. Then commit 9830f4be "fs: Use RWF_* flags for AIO operations" allowed these flags to be set for AIO as well. However that commit forgot to update the condition checking whether the IO completion handling should be defered to a workqueue and thus AIO DIO with RWF_[D]SYNC set will call fsync() from IRQ context resulting in sleep in atomic. Fix the problem by checking directly iocb flags (the same way as it is done in dio_complete()) instead of checking all conditions that could lead to IO being synchronous. CC: Christoph Hellwig <hch@lst.de> CC: Goldwyn Rodrigues <rgoldwyn@suse.com> CC: stable@vger.kernel.org Reported-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Dan Williams authored
commit 230f5a89 upstream. Gerd reports that ->i_mode may contain other bits besides S_IFCHR. Use S_ISCHR() instead. Otherwise, get_user_pages_longterm() may fail on device-dax instances when those are meant to be explicitly allowed. Fixes: 2bb6d283 ("mm: introduce get_user_pages_longterm") Cc: <stable@vger.kernel.org> Reported-by:
Gerd Rausch <gerd.rausch@oracle.com> Acked-by:
Jane Chu <jane.chu@oracle.com> Reported-by:
Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Viresh Kumar authored
commit 0373ca74 upstream. commit a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Williams authored
commit 94db151d upstream. Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Ming Lei authored
commit ba989a01 upstream. When requeuing request, the domain token should have been freed before re-inserting the request to io scheduler. Otherwise, the assigned domain token will be leaked, and IO hang can be caused. Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Omar Sandoval <osandov@fb.com> Cc: stable@vger.kernel.org Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit 7c5a0dcf upstream. The vm counters is counted in sectors, so we should do the conversation in submit_bio. Fixes: 74d46992 ("block: replace bi_bdev with a gendisk pointer and partitions index") Cc: stable@vger.kernel.org Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Anand Jain authored
commit 3c181c12 upstream. The fs_info::super_copy is a byte copy of the on-disk structure and all members must use the accessor macros/functions to obtain the right value. This was missing in update_super_roots and in sysfs readers. Moving between opposite endianness hosts will report bogus numbers in sysfs, and mount may fail as the root will not be restored correctly. If the filesystem is always used on a same endian host, this will not be a problem. Fix this by using the btrfs_set_super...() functions to set fs_info::super_copy values, and for the sysfs, use the cached fs_info::nodesize/sectorsize values. CC: stable@vger.kernel.org Fixes: df93589a ("btrfs: export more from FS_INFO to sysfs") Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by:
-
John David Anglin authored
commit 0adb24e0 upstream. The change to flush_kernel_vmap_range() wasn't sufficient to avoid the SMP stalls. The problem is some drivers call these routines with interrupts disabled. Interrupts need to be enabled for flush_tlb_all() and flush_cache_all() to work. This version adds checks to ensure interrupts are not disabled before calling routines that need IPI interrupts. When interrupts are disabled, we now drop into slower code. The attached change fixes the ordering of cache and TLB flushes in several cases. When we flush the cache using the existing PTE/TLB entries, we need to flush the TLB after doing the cache flush. We don't need to do this when we flush the entire instruction and data caches as these flushes don't use the existing TLB entries. The same is true for tmpalias region flushes. The flush_kernel_vmap_range() and invalidate_kernel_vmap_range() routines have been updated. Secondly, we added a new purge_kernel_dcache_range_asm() routine to pacache.S and use it in invalidate_kernel_vmap_range(). Nominally, purges are faster than flushes as the cache lines don't have to be written back to memory. Hopefully, this is sufficient to resolve the remaining problems due to cache speculation. So far, testing indicates that this is the case. I did work up a patch using tmpalias flushes, but there is a performance hit because we need the physical address for each page, and we also need to sequence access to the tmpalias flush code. This increases the probability of stalls. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 636a415b upstream. When run under QEMU, calling mfctl(16) creates some overhead because the qemu timer has to be scaled and moved into the register. This patch reduces the number of calls to mfctl(16) by moving the calls out of the loops. Additionally, increase the minimal time interval to 8000 cycles instead of 500 to compensate possible QEMU delays when delivering interrupts. Signed-off-by:
-
Helge Deller authored
commit 5ffa8518 upstream. When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by:
-
Lingutla Chandrasekhar authored
commit c52232a4 upstream. On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a live CPU. This happens from the control thread which initiated the unplug. If the CPU on which the control thread runs came out from a longer idle period then the base clock of that CPU might be stale because the control thread runs prior to any event which forwards the clock. In such a case the timers from the unplugged CPU are queued on the live CPU based on the stale clock which can cause large delays due to increased granularity of the outer timer wheels which are far away from base:;clock. But there is a worse problem than that. The following sequence of events illustrates it: - CPU0 timer1 is queued expires = 59969 and base->clk = 59131. The timer is queued at wheel level 2, with resulting expiry time = 60032 (due to level granularity). - CPU1 enters idle @60007, with next timer expiry @60020. - CPU0 is hotplugged at @60009 - CPU1 exits idle and runs the control thread which migrates the timers from CPU0 timer1 is now queued in level 0 for immediate handling in the next softirq because the requested expiry time 59969 is before CPU1 base->clk 60007 - CPU1 runs code which forwards the base clock which succeeds because the next expiring timer. which was collected at idle entry time is still set to 60020. So it forwards beyond 60007 and therefore misses to expire the migrated timer1. That timer gets expired when the wheel wraps around again, which takes between 63 and 630ms depending on the HZ setting. Address both problems by invoking forward_timer_base() for the control CPUs timer base. All other places, which might run into a similar problem (mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid that. [ tglx: Massaged comment and changelog ] Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Co-developed-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by:
Lingutla Chandrasekhar <clingutla@codeaurora.org> Signed-off-by:
-
Shawn Lin authored
commit 0d84b9e5 upstream. Add num_caps field for dw_mci_drv_data to validate the controller id from DT alias and non-DT ways. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Fixes: 800d78bf ("mmc: dw_mmc: add support for implementation specific callbacks") Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shawn Lin authored
commit a4faa492 upstream. Factor out dw_mci_init_slot_caps to consolidate parsing all differents types of capabilities from host contrllers. No functional change intended. Signed-off-by:
-
Shawn Lin authored
commit 5b43df8b upstream. cat /sys/kernel/debug/mmc0/regs will hang up the system since it's in runtime suspended state, so the genpd and biu_clk is off. This patch fixes this problem by calling pm_runtime_get_sync to wake it up before reading the registers. Fixes: e9ed8835 ("mmc: dw_mmc: add runtime PM callback") Cc: <stable@vger.kernel.org> Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 325501d9 upstream. The hs_timing_cfg[] array is indexed using a value derived from the "mshcN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 361c7fe9 ("mmc: dw_mmc-k3: add sd support for hi3660") Signed-off-by:
-
Adrian Hunter authored
commit f8870ae6 upstream. Tuning can leave the IP in an active state (Buffer Read Enable bit set) which prevents the entry to low power states (i.e. S0i3). Data reset will clear it. Generally tuning is followed by a data transfer which will anyway sort out the state, so it is rare that S0i3 is actually prevented. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 71db96dd upstream. We've added a quirk to enable the recent Lenovo dock support, where it overwrites the pin configs of NID 0x17 and 19, not only updating the pin config cache. It works right after the boot, but the problem is that the pin configs are occasionally cleared when the machine goes to PM. Meanwhile the quirk writes the pin configs only at the pre-probe, so this won't be applied any longer. For addressing that issue, this patch moves the code to overwrite the pin configs into HDA_FIXUP_ACT_INIT section so that it's always applied at both probe and resume time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161 Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hans de Goede authored
commit 1ba8f9d3 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 35014406 upstream. The commit change for supporting the multiple ports moved involved some code shuffling, and there the initializations of spinlock and mutex in snd_intelhad object were dropped mistakenly. This patch adds the missing initializations again for each port. Fixes: b4eb0d52 ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Richard Fitzgerald authored
commit 5a23699a upstream. The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations" introduced a potential for kernel memory corruption due to an incorrect if statement allowing non-readable controls to fall through and call the get function. For TLV controls a driver can omit SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function can be called. Instead the normal get() can be invoked unexpectedly and as the driver expects that this will only be called for controls <= 512 bytes, potentially try to copy >512 bytes into the 512 byte return array, so corrupting kernel memory. The problem is an attempt to refactor the snd_ctl_elem_read function to invert the logic so that it conditionally aborted if the control is unreadable instead of conditionally executing. But the if statement wasn't inverted correctly. The correct inversion of if (a && !b) is if (!a || b) Fixes: becf9e5d ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations") Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Erik Veijola authored
commit 240a8af9 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by:
Erik Veijola <erik.veijola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alexander Steffen authored
commit 6b3a1317 upstream. The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe. This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe buffer and copy the data to/from it. The buffer needs to be allocated separately, to ensure that it is cacheline-aligned and not shared with other data, so that DMA can work correctly. Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy") Cc: stable@vger.kernel.org Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by:
-
Arnd Bergmann authored
commit c37fbc09 upstream. Making cmd_getticks 'const' introduced a couple of harmless warnings: drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm': drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] rc = tpm_tis_send_data(chip, cmd_getticks, len); drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] rc = tpm_tis_send_data(chip, cmd_getticks, len); drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}' static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len) This changes the related functions to all take 'const' pointers so that gcc can see this as being correct. I had to slightly modify the logic around tpm_tis_spi_transfer() for this to work without introducing ugly casts. Cc: stable@vger.kernel.org Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Jeremy Boone authored
commit 6bb320ca upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Jeremy Boone authored
commit f9d4d9b5 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Jeremy Boone authored
commit 9b8cb28d upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Jeremy Boone authored
commit 3be23274 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. If a bit does flip it could cause an overrun if it's in one of the size parameters, so sanity check that we're not overrunning the provided buffer when doing a memcpy(). Signed-off-by:
-
Jeremy Boone authored
commit 6d24cd18 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Emil Tantilov authored
commit 0c5661ec upstream. Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by:
Ambarish Soman <asoman@redhat.com> Suggested-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans de Goede authored
commit 1fdb9269 upstream. Commit 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-and-tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 03 Mar, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Pirko authored
commit df45bf84 upstream. Since the block is freed with last chain being put, once we reach the end of iteration of list_for_each_entry_safe, the block may be already freed. I'm hitting this only by creating and deleting clsact: [ 202.171952] ================================================================== [ 202.180182] BUG: KASAN: use-after-free in tcf_block_put_ext+0x240/0x390 [ 202.187590] Read of size 8 at addr ffff880225539a80 by task tc/796 [ 202.194508] [ 202.196185] CPU: 0 PID: 796 Comm: tc Not tainted 4.15.0-rc2jiri+ #5 [ 202.203200] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 [ 202.213613] Call Trace: [ 202.216369] dump_stack+0xda/0x169 [ 202.220192] ? dma_virt_map_sg+0x147/0x147 [ 202.224790] ? show_regs_print_info+0x54/0x54 [ 202.229691] ? tcf_chain_destroy+0x1dc/0x250 [ 202.234494] print_address_description+0x83/0x3d0 [ 202.239781] ? tcf_block_put_ext+0x240/0x390 [ 202.244575] kasan_report+0x1ba/0x460 [ 202.248707] ? tcf_block_put_ext+0x240/0x390 [ 202.253518] tcf_block_put_ext+0x240/0x390 [ 202.258117] ? tcf_chain_flush+0x290/0x290 [ 202.262708] ? qdisc_hash_del+0x82/0x1a0 [ 202.267111] ? qdisc_hash_add+0x50/0x50 [ 202.271411] ? __lock_is_held+0x5f/0x1a0 [ 202.275843] clsact_destroy+0x3d/0x80 [sch_ingress] [ 202.281323] qdisc_destroy+0xcb/0x240 [ 202.285445] qdisc_graft+0x216/0x7b0 [ 202.289497] tc_get_qdisc+0x260/0x560 Fix this by holding the block also by chain 0 and put chain 0 explicitly, out of the list_for_each_entry_safe loop at the very end of tcf_block_put_ext. Fixes: efbf7897 ("net_sched: get rid of rcu_barrier() in tcf_block_put_ext()") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Cong Wang authored
commit efbf7897 upstream. Both Eric and Paolo noticed the rcu_barrier() we use in tcf_block_put_ext() could be a performance bottleneck when we have a lot of tc classes. Paolo provided the following to demonstrate the issue: tc qdisc add dev lo root htb for I in `seq 1 1000`; do tc class add dev lo parent 1: classid 1:$I htb rate 100kbit tc qdisc add dev lo parent 1:$I handle $((I + 1)): htb for J in `seq 1 10`; do tc filter add dev lo parent $((I + 1)): u32 match ip src 1.1.1.$J done done time tc qdisc del dev root real 0m54.764s user 0m0.023s sys 0m0.000s The rcu_barrier() there is to ensure we free the block after all chains are gone, that is, to queue tcf_block_put_final() at the tail of workqueue. We can achieve this ordering requirement by refcnt'ing tcf block instead, that is, the tcf block is freed only when the last chain in this block is gone. This also simplifies the code. Paolo reported after this patch we get: real 0m0.017s user 0m0.000s sys 0m0.017s Tested-by:
Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Roman Kapl authored
commit a60b3f51 upstream. tcf_block_put_ext has assumed that all filters (and thus their goto actions) are destroyed in RCU callback and thus can not race with our list iteration. However, that is not true during netns cleanup (see tcf_exts_get_net comment). Prevent the user after free by holding all chains (except 0, that one is already held). foreach_safe is not enough in this case. To reproduce, run the following in a netns and then delete the ns: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: handle 1 prio 1 flower action goto chain 2 Fixes: 822e86d9 ("net_sched: remove tcf_block_put_deferred()") Signed-off-by:
Roman Kapl <code@rkapl.cz> Acked-by:
-
Roman Kapl authored
commit d7aa04a5 upstream. If you flush (delete) a filter chain other than chain 0 (such as when deleting the device), the kernel may run into a use-after-free. The chain refcount must not be decremented unless we are sure we are done with the chain. To reproduce the bug, run: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: flower ip link del dtest Introduced in: commit f93e1cdc ("net/sched: fix filter flushing"), but unless you have KAsan or luck, you won't notice it until commit 0dadc117 ("cls_flower: use tcf_exts_get_net() before call_rcu()") Fixes: f93e1cdc ("net/sched: fix filter flushing") Acked-by:
-
Antoine Tenart authored
commit 760b3843 upstream. This patch adds comphy phandles to the Ethernet ports in the mcbin device tree. The comphy is used to configure the serdes PHYs used by these ports. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Antoine Tenart authored
commit 910d1bf2 upstream. This patch describes the comphy available in the cp110 master and slave. This comphy provides serdes lanes used by various controllers such as the network one. Signed-off-by:
-
Sam Bobroff authored
commit c9dccf1d upstream. Currently if the kernel receives a memory hot-unplug event early enough, it may get stuck in an infinite loop in dissolve_free_huge_pages(). This appears as a stall just after: pseries-hotplug-mem: Attempting to hot-remove XX LMB(s) at YYYYYYYY It appears to be caused by "minimum_order" being uninitialized, due to init_ras_IRQ() executing before hugetlb_init(). To correct this, extract the part of init_ras_IRQ() that enables hotplug event processing and place it in the machine_late_initcall phase, which is guaranteed to be after hugetlb_init() is called. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Reorder the functions to make the diff readable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
James Hogan authored
commit ebabcf17 upstream. GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit multiply with 128bit result) for MIPS64r6 builds, even in code which doesn't explicitly use 128bit types, such as the following: unsigned long func(unsigned long a, unsigned long b) { return a > (~0UL) / b; } Which GCC rearanges to: return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff; Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under normal circumstances we wouldn't expect any calls to __multi3 to be generated from kernel code. Reported-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
James Hogan <jhogan@kernel.org> Tested-by:
Waldemar Brodkorb <wbx@openadk.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Matthew Fortune <matthew.fortune@mips.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17890/ Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
