- 21 Jul, 2014 40 commits
-
-
Hugh Dickins authored
commit 7f39dda9 upstream. Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Jérôme Carretero authored
commit d2518365 upstream. This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by:
Jérôme Carretero <cJ-ko@zougloub.eu> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Alex Deucher authored
commit 7d5ab300 upstream. May fix display issues with non-HDMI displays. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 64252835 upstream. We need to specify the encoder mode as LVDS for eDP when using the Crtc_Source atom table in order to properly set up the FMT hardware. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73911Signed-off-by:
-
Alex Deucher authored
commit 3b6d9fd2 upstream. Only DCE5+ asics support DP 1.2. Noticed by ArtForz on IRC. Signed-off-by:
-
Alex Deucher authored
commit af5d3653 upstream. We were checking the ext clock rather than the display clock. Noticed by ArtForz on IRC. Signed-off-by:
-
Jukka Taimisto authored
commit 8a96f3cd upstream. -[0x01 Introduction We have found a programming error causing a deadlock in Bluetooth subsystem of Linux kernel. The problem is caused by missing release_sock() call when L2CAP connection creation fails due full accept queue. The issue can be reproduced with 3.15-rc5 kernel and is also present in earlier kernels. -[0x02 Details The problem occurs when multiple L2CAP connections are created to a PSM which contains listening socket (like SDP) and left pending, for example, configuration (the underlying ACL link is not disconnected between connections). When L2CAP connection request is received and listening socket is found the l2cap_sock_new_connection_cb() function (net/bluetooth/l2cap_sock.c) is called. This function locks the 'parent' socket and then checks if the accept queue is full. 1178 lock_sock(parent); 1179 1180 /* Check for backlog size */ 1181 if (sk_acceptq_is_full(parent)) { 1182 BT_DBG("backlog full %d", parent->sk_ack_backlog); 1183 return NULL; 1184 } If case the accept queue is full NULL is returned, but the 'parent' socket is not released. Thus when next L2CAP connection request is received the code blocks on lock_sock() since the parent is still locked. Also note that for connections already established and waiting for configuration to complete a timeout will occur and l2cap_chan_timeout() (net/bluetooth/l2cap_core.c) will be called. All threads calling this function will also be blocked waiting for the channel mutex since the thread which is waiting on lock_sock() alread holds the channel mutex. We were able to reproduce this by sending continuously L2CAP connection request followed by disconnection request containing invalid CID. This left the created connections pending configuration. After the deadlock occurs it is impossible to kill bluetoothd, btmon will not get any more data etc. requiring reboot to recover. -[0x03 Fix Releasing the 'parent' socket when l2cap_sock_new_connection_cb() returns NULL seems to fix the issue. Signed-off-by:
Jukka Taimisto <jtt@codenomicon.com> Reported-by:
Tommi Mäkilä <tmakila@codenomicon.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
hujianyang authored
commit 72abc8f4 upstream. I hit the same assert failed as Dolev Raviv reported in Kernel v3.10 shows like this: [ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297) [ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G O 3.10.40 #1 [ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24) [ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28) [ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) [ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) [ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) [ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) [ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) [ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) [ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238) [ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) [ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) [ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) [ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) [ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418) [ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530) [ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54) [ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184) [ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac) [ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0) [ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40) After analyzing the code, I found a condition that may cause this failed in correct operations. Thus, I think this assertion is wrong and should be removed. Suppose there are two clean znodes and one dirty znode in TNC. So the per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops on this znode. We clear COW bit and DIRTY bit in write_index() without @tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the comments in write_index() shows, if another process hold @tnc_mutex and dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1). We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in free_obsolete_znodes() to keep it right. If shrink_tnc() performs between decrease and increase, it will release other 2 clean znodes it holds and found @clean_zn_cnt is less than zero (1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will soon correct @clean_zn_cnt and no harm to fs in this case, I think this assertion could be removed. 2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2 Thread A (commit) Thread B (write or others) Thread C (shrinker) ->write_index ->clear_bit(DIRTY_NODE) ->clear_bit(COW_ZNODE) @clean_zn_cnt == 2 ->mutex_locked(&tnc_mutex) ->dirty_cow_znode ->!ubifs_zn_cow(znode) ->!test_and_set_bit(DIRTY_NODE) ->atomic_dec(&clean_zn_cnt) ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == 1 ->mutex_locked(&tnc_mutex) ->shrink_tnc ->destroy_tnc_subtree ->atomic_sub(&clean_zn_cnt, 2) ->ubifs_assert <- hit ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == -1 ->mutex_lock(&tnc_mutex) ->free_obsolete_znodes ->atomic_inc(&clean_zn_cnt) ->mutux_unlock(&tnc_mutex) @clean_zn_cnt == 0 (correct after shrink) Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Christoph Hellwig authored
commit 12337901 upstream. Note nobody's ever noticed because the typical client probably never requests FILES_AVAIL without also requesting something else on the list. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Yann Droneaud authored
commit b6f04d3d upstream. The i386 ABI disagrees with most other ABIs regarding alignment of data types larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABI struct c4iw_create_cq_resp gets implicitly padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. The tool pahole can be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name c4iw_create_cq_resp \ drivers/infiniband/hw/cxgb4/iw_cxgb4.o Then, structure layout can be compared between i386 and x86_64: +++ obj-i386/drivers/infiniband/hw/cxgb4/iw_cxgb4.o.pahole.txt 2014-03-28 11:43:05.547432195 +0100 --- obj-x86_64/drivers/infiniband/hw/cxgb4/iw_cxgb4.o.pahole.txt 2014-03-28 10:55:10.990133017 +0100 @@ -14,9 +13,8 @@ struct c4iw_create_cq_resp { __u32 size; /* 28 4 */ __u32 qid_mask; /* 32 4 */ - /* size: 36, cachelines: 1, members: 6 */ - /* last cacheline: 36 bytes */ + /* size: 40, cachelines: 1, members: 6 */ + /* padding: 4 */ + /* last cacheline: 40 bytes */ }; This ABI disagreement will make an x86_64 kernel try to write past the buffer provided by an i386 binary. When boundary check will be implemented, the x86_64 kernel will refuse to write past the i386 userspace provided buffer and the uverbs will fail. If the structure is on a page boundary and the next page is not mapped, ib_copy_to_udata() will fail and the uverb will fail. This patch adds an explicit padding at end of structure c4iw_create_cq_resp, and, like 92b0ca7c ("IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()"), makes function c4iw_create_cq() not writting this padding field to userspace. This way, x86_64 kernel will be able to write struct c4iw_create_cq_resp as expected by unpatched and patched i386 libcxgb4. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Fixes: cfdda9d7 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Fixes: e24a72a3 ("RDMA/cxgb4: Fix four byte info leak in c4iw_create_cq()") Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bart Van Assche authored
commit 8ec0a0e6 upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> [ydroneaud@opteya.com: rework a bit to reduce the amount of code changed] Signed-off-by:
-
Aleksander Morgado authored
commit 0ce5fb58 upstream. A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ Aleksander: backport to 3.13-stable ] Signed-off-by:
-
Aleksander Morgado authored
commit ff1fcd50 upstream. Signed-off-by:
-
Arik Nemtsov authored
commit 923eaf36 upstream. Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Christian Borntraeger authored
commit 993072ee upstream. The IRB might be 96 bytes if the extended-I/O-measurement facility is used. This feature is currently not used by Linux, but struct irb already has the emw defined. So let's make the irb in lowcore match the size of the internal data structure to be future proof. We also have to add a pad, to correctly align the paste. The bigger irb field also circumvents a bug in some QEMU versions that always write the emw field on test subchannel and therefore destroy the paste definitions of this CPU. Running under these QEMU version broke some timing functions in the VDSO and all users of these functions, e.g. some JREs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Huang Rui authored
commit e4d58f5d upstream. TEST 12 and TEST 24 unlinks the URB write request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to transfer, the gadget side will complain the wrong data which is not expected. Because in host side, usbtest doesn't fill the data buffer as mod 63 and this patch fixed it. [20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last [20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active [20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy [20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete [20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0 [20285.491431] zero gadget: bad OUT byte, buf[1] = 0 [20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000 [20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512 [20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last [20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0 Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Bin Wang authored
commit ddb09754 upstream. the vma range size is always page size aligned in mmap, while the real io space range may not be page aligned, thus leading to range check failure in the uio_mmap_physical(). for example, in a case of io range size "mem->size == 1KB", and we have (vma->vm_end - vma->vm_start) == 4KB, due to "len" is aligned to page size in do_mmap_pgoff(). now fix this issue by align mem->size to page size in the check. Signed-off-by:
Bin Wang <binw@marvell.com> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Linus Torvalds authored
commit b6550287 upstream. In commit 7314e613 ("Fix a few incorrectly checked [io_]remap_pfn_range() calls") the uio driver started more properly checking the passed-in user mapping arguments against the size of the actual uio driver data. That in turn exposed that some driver authors apparently didn't realize that mmap can only work on a page granularity, and had tried to use it with smaller mappings, with the new size check catching that out. So since it's not just the user mmap() arguments that can be confused, make the uio mmap code also verify that the uio driver has the memory allocated at page boundaries in order for mmap to work. If the device memory isn't properly aligned, we return [ENODEV] The fildes argument refers to a file whose type is not supported by mmap(). as per the open group documentation on mmap. Reported-by:
Holger Brunck <holger.brunck@keymile.com> Acked-by:
-
Dennis Dalessandro authored
commit 7e6d3e5c upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 911eccd2 upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
-
Maurizio Lombardi authored
commit b5b60778 upstream. The variable "size" is expressed as number of blocks and not as number of clusters, this could trigger a kernel panic when using ext4 with the size of a cluster different from the size of a block. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit eeece469 upstream. Tail of a page straddling inode size must be zeroed when being written out due to POSIX requirement that modifications of mmaped page beyond inode size must not be written to the file. ext4_bio_write_page() did this only for blocks fully beyond inode size but didn't properly zero blocks partially beyond inode size. Fix this. The problem has been uncovered by mmap_11-4 test in openposix test suite (part of LTP). Reported-by:
Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com> Fixes: 5a0dc736 Fixes: bd2d0210Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Andreas Schrägle authored
commit 754a292f upstream. Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by:
Andreas Schrägle <ajs124.ajs124@gmail.com> Signed-off-by:
-
Krzysztof Hałasa authored
commit c7d37a66 upstream. Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Signed-off-by:
-
Leif Lindholm authored
commit 1d530fa4 upstream. A few platforms lack a 'device_type = "memory"' for their memory nodes, relying on an old ppc quirk in order to discover its memory. Add the missing data so that all parsing code can find memory nodes correctly. Signed-off-by:
Leif Lindholm <leif.lindholm@linaro.org> Acked-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: gaurav.minocha@alumni.ubc.ca Patchwork: https://patchwork.linux-mips.org/patch/6989/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [ kamal: backport to 3.8-stable: only lantiq/dts/easy50712.dts ] Signed-off-by:
-
Jonathan Cameron authored
commit a91a73c8 upstream. Reported-by:
Erik Habbinga <Erik.Habbinga@schneider-electric.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Acked-by:
Hartmut Knaack <knaack.h@gmx.de> Signed-off-by:
-
Takashi Iwai authored
commit deb29e90 upstream. When ivtv PCM device is accessed at the state where no firmware is loaded, it oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffffa049a881>] try_mailbox.isra.0+0x11/0x50 [ivtv] Call Trace: [<ffffffffa049aa20>] ivtv_api_call+0x160/0x6b0 [ivtv] [<ffffffffa049af86>] ivtv_api+0x16/0x40 [ivtv] [<ffffffffa049b10c>] ivtv_vapi+0xac/0xc0 [ivtv] [<ffffffffa049d40d>] ivtv_start_v4l2_encode_stream+0x19d/0x630 [ivtv] [<ffffffffa0530653>] snd_ivtv_pcm_capture_open+0x173/0x1c0 [ivtv_alsa] [<ffffffffa04526f1>] snd_pcm_open_substream+0x51/0x100 [snd_pcm] [<ffffffffa0452853>] snd_pcm_open+0xb3/0x260 [snd_pcm] [<ffffffffa0452a37>] snd_pcm_capture_open+0x37/0x50 [snd_pcm] [<ffffffffa033f557>] snd_open+0xa7/0x1e0 [snd] [<ffffffff8118a628>] chrdev_open+0x88/0x1d0 [<ffffffff811840be>] do_dentry_open+0x1de/0x270 [<ffffffff81193a73>] do_last+0x1c3/0xec0 [<ffffffff81194826>] path_openat+0xb6/0x670 [<ffffffff81195b65>] do_filp_open+0x35/0x80 [<ffffffff81185449>] do_sys_open+0x129/0x210 [<ffffffff815b782d>] system_call_fastpath+0x1a/0x1f This patch adds the check of firmware at PCM open callback like other open callbacks of this driver. Bugzilla: https://apibugzilla.novell.com/show_bug.cgi?id=875440Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Olivier Langlois authored
commit 3b35fc81 upstream. timestamps in v4l2 buffers returned to userspace are updated in uvc_video_clock_update() which uses timestamps fetched from uvc_video_clock_decode() by calling unconditionally ktime_get_ts(). Hence setting the module clock param to realtime has no effect before this patch. This has been tested with ffmpeg: ffmpeg -y -f v4l2 -input_format yuyv422 -video_size 640x480 -framerate 30 -i /dev/video0 \ -f alsa -acodec pcm_s16le -ar 16000 -ac 1 -i default \ -c:v libx264 -preset ultrafast \ -c:a libfdk_aac \ out.mkv and inspecting the v4l2 input starting timestamp. Signed-off-by:
Olivier Langlois <olivier@trillion01.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Trond Myklebust authored
commit c789102c upstream. If the accept() call fails, we need to put the module reference. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Russell King authored
commit 3683f44c upstream. While debugging the FEC ethernet driver using stacktrace, it was noticed that the stacktraces always begin as follows: [<c00117b4>] save_stack_trace_tsk+0x0/0x98 [<c0011870>] save_stack_trace+0x24/0x28 ... This is because the stack trace code includes the stack frames for itself. This is incorrect behaviour, and also leads to "skip" doing the wrong thing (which is the number of stack frames to avoid recording.) Perversely, it does the right thing when passed a non-current thread. Fix this by ensuring that we have a known constant number of frames above the main stack trace function, and always skip these. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jeff Mahoney authored
commit 22e7478d upstream. Prior to commit 0e4f6a79 (Fix reiserfs_file_release()), reiserfs truncates serialized on i_mutex. They mostly still do, with the exception of reiserfs_file_release. That blocks out other writers via the tailpack mutex and the inode openers counter adjusted in reiserfs_file_open. However, NFS will call reiserfs_setattr without having called ->open, so we end up with a race when nfs is calling ->setattr while another process is releasing the file. Ultimately, it triggers the BUG_ON(inode->i_size != new_file_size) check in maybe_indirect_to_direct. The solution is to pull the lock into reiserfs_setattr to encompass the truncate_setsize call as well. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Bart Van Assche authored
commit 024ca901 upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by:
Sagi Grimberg <sagig@mellanox.com> Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069Signed-off-by:
-
Kees Cook authored
commit 1b15d2e5 upstream. Some drivers use the first HID report in the list instead of using an index. In these cases, validation uses ID 0, which was supposed to mean "first known report". This fixes the problem, which was causing at least the lgff family of devices to stop working since hid_validate_values was being called with ID 0, but the devices used single numbered IDs for their reports: 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x05, /* Usage (Gamepad), */ 0xA1, 0x01, /* Collection (Application), */ 0xA1, 0x02, /* Collection (Logical), */ 0x85, 0x01, /* Report ID (1), */ ... Reported-by:
Simon Wood <simon@mungewell.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Chander Kashyap authored
commit 086abb58 upstream. In of_init_opp_table function, if a failure to add an OPP is detected, the count of OPPs, yet to be added is not updated. Fix this by decrementing this count on failure as well. Signed-off-by:
Chander Kashyap <k.chander@samsung.com> Signed-off-by:
Inderpal Singh <inderpal.s@samsung.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ kamal: backport to 3.8-stable: context ] Signed-off-by:
-
Joe Handzik authored
commit 3b7a45e5 upstream. Signed-off-by:
Scott Teel <scott.teel@hp.com> Signed-off-by:
Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Mike Miller authored
commit 97b9f53d upstream. This patch adds the PCI ID's for HP Smart Array Gen9 controllers. Please consider this patch for inclusion. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Lv Zheng authored
commit 73577d1d upstream. This patch fixes the following issue: If DSDT is customized, no local DSDT copy is needed. References: https://bugzilla.kernel.org/show_bug.cgi?id=69711Signed-off-by:
Enrico Etxe Arte <goitizena.generoa@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by:
-
hujianyang authored
commit 691a7c6f upstream. There is a race condition in UBIFS: Thread A (mmap) Thread B (fsync) ->__do_fault ->write_cache_pages -> ubifs_vm_page_mkwrite -> budget_space -> lock_page -> release/convert_page_budget -> SetPagePrivate -> TestSetPageDirty -> unlock_page -> lock_page -> TestClearPageDirty -> ubifs_writepage -> do_writepage -> release_budget -> ClearPagePrivate -> unlock_page -> !(ret & VM_FAULT_LOCKED) -> lock_page -> set_page_dirty -> ubifs_set_page_dirty -> TestSetPageDirty (set page dirty without budgeting) -> unlock_page This leads to situation where we have a diry page but no budget allocated for this page, so further write-back may fail with -ENOSPC. In this fix we return from page_mkwrite without performing unlock_page. We return VM_FAULT_LOCKED instead. After doing this, the race above will not happen. Signed-off-by:
Laurence Withers <lwithers@guralp.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 501fd989 upstream. Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Reviewed-by:
-
Mike Frysinger authored
commit 7fd44dac upstream. The io_setup takes a pointer to a context id of type aio_context_t. This in turn is typed to a __kernel_ulong_t. We could tweak the exported headers to define this as a 64bit quantity for specific ABIs, but since we already have a 32bit compat shim for the x86 ABI, let's just re-use that logic. The libaio package is also written to expect this as a pointer type, so a compat shim would simplify that. The io_submit func operates on an array of pointers to iocb structs. Padding out the array to be 64bit aligned is a huge pain, so convert it over to the existing compat shim too. We don't convert io_getevents to the compat func as its only purpose is to handle the timespec struct, and the x32 ABI uses 64bit times. With this change, the libaio package can now pass its testsuite when built for the x32 ABI. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/1399250595-5005-1-git-send-email-vapier@gentoo.org Cc: H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
