- 07 Jan, 2020 40 commits
-
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 501a90c9 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7 ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 9cf1cd8e ] In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e436905 ("tipc: fix a slab object leak") Fixes: a62fbcce ("tipc: make subscriber server support net namespace") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 9424e2e7 ] Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c ("tcp: options clean up") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit c4b4c421 ] We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813 ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Konstantin Khorenko authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 5d603311 ] Fix the race between load and unload a kernel module. sys_delete_module() try_stop_module() mod->state = _GOING add_unformed_module() old = find_module_all() (old->state == _GOING => wait_event_interruptible()) During pre-condition finished_loading() rets 0 schedule() (never gets waken up later) free_module() mod->state = _UNFORMED list_del_rcu(&mod->list) (dels mod from "modules" list) return The race above leads to modprobe hanging forever on loading a module. Error paths on loading module call wake_up_all(&module_wq) after freeing module, so let's do the same on straight module unload. Fixes: 6e6de3de ("kernel/module.c: Only return -EEXIST for modules that have finished loading") Reviewed-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Pavel Tikhomirov authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 5fcaf698 ] I was investigating a crash in our Virtuozzo7 kernel which happened in in svcauth_unix_set_client. I found out that we access m_client field in ip_map structure, which was received from sunrpc_cache_lookup (we have a bit older kernel, now the code is in sunrpc_cache_add_entry), and these field looks uninitialized (m_client == 0x74 don't look like a pointer) but in the cache_head in flags we see 0x1 which is CACHE_VALID. It looks like the problem appeared from our previous fix to sunrpc (1): commit 4ecd55ea ("sunrpc: fix cache_head leak due to queued request") And we've also found a patch already fixing our patch (2): commit d58431ea ("sunrpc: don't mark uninitialised items as VALID.") Though the crash is eliminated, I think the core of the problem is not completely fixed: Neil in the patch (2) makes cache_head CACHE_NEGATIVE, before cache_fresh_locked which was added in (1) to fix crash. These way cache_is_valid won't say the cache is valid anymore and in svcauth_unix_set_client the function cache_check will return error instead of 0, and we don't count entry as initialized. But it looks like we need to remove cache_fresh_locked completely in sunrpc_cache_lookup: In (1) we've only wanted to make cache_fresh_unlocked->cache_dequeue so that cache_requests with no readers also release corresponding cache_head, to fix their leak. We with Vasily were not sure if cache_fresh_locked and cache_fresh_unlocked should be used in pair or not, so we've guessed to use them in pair. Now we see that we don't want the CACHE_VALID bit set here by cache_fresh_locked, as "valid" means "initialized" and there is no initialization in sunrpc_cache_add_entry. Both expiry_time and last_refresh are not used in cache_fresh_unlocked code-path and also not required for the initial fix. So to conclude cache_fresh_locked was called by mistake, and we can just safely remove it instead of crutching it with CACHE_NEGATIVE. It looks ideologically better for me. Hope I don't miss something here. Here is our crash backtrace: [13108726.326291] BUG: unable to handle kernel NULL pointer dereference at 0000000000000074 [13108726.326365] IP: [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.326448] PGD 0 [13108726.326468] Oops: 0002 [#1] SMP [13108726.326497] Modules linked in: nbd isofs xfs loop kpatch_cumulative_81_0_r1(O) xt_physdev nfnetlink_queue bluetooth rfkill ip6table_nat nf_nat_ipv6 ip_vs_wrr ip_vs_wlc ip_vs_sh nf_conntrack_netlink ip_vs_sed ip_vs_pe_sip nf_conntrack_sip ip_vs_nq ip_vs_lc ip_vs_lblcr ip_vs_lblc ip_vs_ftp ip_vs_dh nf_nat_ftp nf_conntrack_ftp iptable_raw xt_recent nf_log_ipv6 xt_hl ip6t_rt nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_TCPMSS xt_tcpmss vxlan ip6_udp_tunnel udp_tunnel xt_statistic xt_NFLOG nfnetlink_log dummy xt_mark xt_REDIRECT nf_nat_redirect raw_diag udp_diag tcp_diag inet_diag netlink_diag af_packet_diag unix_diag rpcsec_gss_krb5 xt_addrtype ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 ebtable_nat ebtable_broute nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle ip6table_raw nfsv4 [13108726.327173] dns_resolver cls_u32 binfmt_misc arptable_filter arp_tables ip6table_filter ip6_tables devlink fuse_kio_pcs ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 xt_comment nf_conntrack_ipv4 nf_defrag_ipv4 xt_wdog_tmo xt_multiport bonding xt_set xt_conntrack iptable_filter iptable_mangle kpatch(O) ebtable_filter ebt_among ebtables ip_set_hash_ip ip_set nfnetlink vfat fat skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass fuse pcspkr ses enclosure joydev sg mei_me hpwdt hpilo lpc_ich mei ipmi_si shpchp ipmi_devintf ipmi_msghandler xt_ipvs acpi_power_meter ip_vs_rr nfsv3 nfsd auth_rpcgss nfs_acl nfs lockd grace fscache nf_nat cls_fw sch_htb sch_cbq sch_sfq ip_vs em_u32 nf_conntrack tun br_netfilter veth overlay ip6_vzprivnet ip6_vznetstat ip_vznetstat [13108726.327817] ip_vzprivnet vziolimit vzevent vzlist vzstat vznetstat vznetdev vzmon vzdev bridge pio_kaio pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper scsi_transport_iscsi 8021q syscopyarea sysfillrect garp sysimgblt fb_sys_fops mrp stp ttm llc bnx2x crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel drm dm_multipath ghash_clmulni_intel uas aesni_intel lrw gf128mul glue_helper ablk_helper cryptd tg3 smartpqi scsi_transport_sas mdio libcrc32c i2c_core usb_storage ptp pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kpatch_cumulative_82_0_r1] [13108726.328403] CPU: 35 PID: 63742 Comm: nfsd ve: 51332 Kdump: loaded Tainted: G W O ------------ 3.10.0-862.20.2.vz7.73.29 #1 73.29 [13108726.328491] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 10/02/2018 [13108726.328554] task: ffffa0a6a41b1160 ti: ffffa0c2a74bc000 task.ti: ffffa0c2a74bc000 [13108726.328610] RIP: 0010:[<ffffffffc01f79eb>] [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.328706] RSP: 0018:ffffa0c2a74bfd80 EFLAGS: 00010246 [13108726.328750] RAX: 0000000000000001 RBX: ffffa0a6183ae000 RCX: 0000000000000000 [13108726.328811] RDX: 0000000000000074 RSI: 0000000000000286 RDI: ffffa0c2a74bfcf0 [13108726.328864] RBP: ffffa0c2a74bfe00 R08: ffffa0bab8c22960 R09: 0000000000000001 [13108726.328916] R10: 0000000000000001 R11: 0000000000000001 R12: ffffa0a32aa7f000 [13108726.328969] R13: ffffa0a6183afac0 R14: ffffa0c233d88d00 R15: ffffa0c2a74bfdb4 [13108726.329022] FS: 0000000000000000(0000) GS:ffffa0e17f9c0000(0000) knlGS:0000000000000000 [13108726.329081] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13108726.332311] CR2: 0000000000000074 CR3: 00000026a1b28000 CR4: 00000000007607e0 [13108726.334606] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [13108726.336754] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [13108726.338908] PKRU: 00000000 [13108726.341047] Call Trace: [13108726.343074] [<ffffffff8a2c78b4>] ? groups_alloc+0x34/0x110 [13108726.344837] [<ffffffffc01f5eb4>] svc_set_client+0x24/0x30 [sunrpc] [13108726.346631] [<ffffffffc01f2ac1>] svc_process_common+0x241/0x710 [sunrpc] [13108726.348332] [<ffffffffc01f3093>] svc_process+0x103/0x190 [sunrpc] [13108726.350016] [<ffffffffc07d605f>] nfsd+0xdf/0x150 [nfsd] [13108726.351735] [<ffffffffc07d5f80>] ? nfsd_destroy+0x80/0x80 [nfsd] [13108726.353459] [<ffffffff8a2bf741>] kthread+0xd1/0xe0 [13108726.355195] [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60 [13108726.356896] [<ffffffff8a9556dd>] ret_from_fork_nospec_begin+0x7/0x21 [13108726.358577] [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60 [13108726.360240] Code: 4c 8b 45 98 0f 8e 2e 01 00 00 83 f8 fe 0f 84 76 fe ff ff 85 c0 0f 85 2b 01 00 00 49 8b 50 40 b8 01 00 00 00 48 89 93 d0 1a 00 00 <f0> 0f c1 02 83 c0 01 83 f8 01 0f 8e 53 02 00 00 49 8b 44 24 38 [13108726.363769] RIP [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.365530] RSP <ffffa0c2a74bfd80> [13108726.367179] CR2: 0000000000000074 Fixes: d58431ea ("sunrpc: don't mark uninitialised items as VALID.") Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by:
NeilBrown <neilb@suse.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Tejun Heo authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 8efe1223 upstream. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Qian Cai <cai@lca.pw> Fixes: def98c84 ("workqueue: Fix spurious sanity check failures in destroy_workqueue()") Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Ming Lei authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit d2c9be89 upstream. 8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") avoids sysfs buffer overflow, and reserves one character for line break. However, the last snprintf() doesn't get correct 'size' parameter passed in, so fixed it. Fixes: 8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Chen Jun authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit aa71ecd8 upstream. In 64bit system. sb->s_maxbytes of shmem filesystem is MAX_LFS_FILESIZE, which equal LLONG_MAX. If offset > LLONG_MAX - PAGE_SIZE, offset + len < LLONG_MAX in shmem_fallocate, which will pass the checking in vfs_fallocate. /* Check for wrap through zero too */ if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0)) return -EFBIG; loff_t unmap_start = round_up(offset, PAGE_SIZE) in shmem_fallocate causes a overflow. Syzkaller reports a overflow problem in mm/shmem: UBSAN: Undefined behaviour in mm/shmem.c:2014:10 signed integer overflow: '9223372036854775807 + 1' cannot be represented in type 'long long int' CPU: 0 PID:17076 Comm: syz-executor0 Not tainted 4.1.46+ #1 Hardware name: linux, dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2c8 arch/arm64/kernel/traps.c:100 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:238 __dump_stack lib/dump_stack.c:15 [inline] ubsan_epilogue+0x18/0x70 lib/ubsan.c:164 handle_overflow+0x158/0x1b0 lib/ubsan.c:195 shmem_fallocate+0x6d0/0x820 mm/shmem.c:2104 vfs_fallocate+0x238/0x428 fs/open.c:312 SYSC_fallocate fs/open.c:335 [inline] SyS_fallocate+0x54/0xc8 fs/open.c:239 The highest bit of unmap_start will be appended with sign bit 1 (overflow) when calculate shmem_falloc.start: shmem_falloc.start = unmap_start >> PAGE_SHIFT. Fix it by casting the type of unmap_start to u64, when right shifted. This bug is found in LTS Linux 4.1. It also seems to exist in mainline. Link: http://lkml.kernel.org/r/1573867464-5107-1-git-send-email-chenjun102@huawei.comSigned-off-by:
Chen Jun <chenjun102@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vincenzo Frascino authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 55226345 ] clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the powerpc vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Fixes: a7f290da ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Cc: stable@vger.kernel.org Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> [chleroy: changed CLOCK_REALTIME_RES to CLOCK_HRTIMER_RES] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a55eca3a5e85233838c2349783bcb5164dae1d09.1575273217.git.christophe.leroy@c-s.frSigned-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit e6803efa ] This patch fixes several Coverity complaints about not always checking the qla2x00_wait_for_hba_online() return value. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit c29282c6 ] Set the r??_data_len variables before using these instead of after. This patch fixes the following Coverity complaint: const: At condition req_data_len != rsp_data_len, the value of req_data_len must be equal to 0. const: At condition req_data_len != rsp_data_len, the value of rsp_data_len must be equal to 0. dead_error_condition: The condition req_data_len != rsp_data_len cannot be true. Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: a9b6f722 ("[SCSI] qla2xxx: Implementation of bidirectional.") # v3.7. Signed-off-by:
-
Himanshu Madhani authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 5d328de6 ] With debug kernel we see following wanings indicating memory leak. [28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978 dma_debug_device_change+0x166/0x1d0 [28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA allocations while released from device [count=5] [28809.523964] One of leaked entries details: [device address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fix this by unmapping DMA memory. Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 7f028caa ] In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 61dd7261 ("pinctrl: Add pinctrl-s3c64xx driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Jarkko Nikula authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 287897f9 ] The MMC card detection GPIO polarity is active low on TAO3530, like in many other similar boards. Now the card is not detected and it is unable to mount rootfs from an SD card. Fix this by using the correct polarity. This incorrect polarity was defined already in the commit 30d95c6d ("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18 kernel and later changed to use defined GPIO constants in v4.4 kernel by the commit 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards"). While the latter commit did not introduce the issue I'm marking it with Fixes tag due the v4.4 kernels still being maintained. Fixes: 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards") Cc: linux-stable <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Shirish S authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit c95b323d ] MC4_MISC thresholding is not supported on all family 0x15 processors, hence skip the x86_model check when applying the quirk. [ bp: massage commit message. ] Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1547106849-3476-2-git-send-email-shirish.s@amd.comSigned-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit cd0d465b ] Fix a static code checker warning: drivers/net/ethernet/intel/e100.c:1349 e100_load_ucode_wait() warn: passing zero to 'PTR_ERR' Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
James Smart authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 8b47ae69 ] Depending on the chipset, the number of NPIV vports may vary and be in excess of what most switches support (256). To avoid confusion with the users, limit the reported NPIV vports to 256. Additionally correct the 16G adapter which is reporting a bogus NPIV vport number if the link is down. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit a0e248bb ] When doing a buffered write it's possible to leave the subv_writers counter of the root, used for synchronization between buffered nocow writers and snapshotting. This happens in an exceptional case like the following: 1) We fail to allocate data space for the write, since there's not enough available data space nor enough unallocated space for allocating a new data block group; 2) Because of that failure, we try to go to NOCOW mode, which succeeds and therefore we set the local variable 'only_release_metadata' to true and set the root's sub_writers counter to 1 through the call to btrfs_start_write_no_snapshotting() made by check_can_nocow(); 3) The call to btrfs_copy_from_user() returns zero, which is very unlikely to happen but not impossible; 4) No pages are copied because btrfs_copy_from_user() returned zero; 5) We call btrfs_end_write_no_snapshotting() which decrements the root's subv_writers counter to 0; 6) We don't set 'only_release_metadata' back to 'false' because we do it only if 'copied', the value returned by btrfs_copy_from_user(), is greater than zero; 7) On the next iteration of the while loop, which processes the same page range, we are now able to allocate data space for the write (we got enough data space released in the meanwhile); 8) After this if we fail at btrfs_delalloc_reserve_metadata(), because now there isn't enough free metadata space, or in some other place further below (prepare_pages(), lock_and_cleanup_extent_if_need(), btrfs_dirty_pages()), we break out of the while loop with 'only_release_metadata' having a value of 'true'; 9) Because 'only_release_metadata' is 'true' we end up decrementing the root's subv_writers counter to -1 (through a call to btrfs_end_write_no_snapshotting()), and we also end up not releasing the data space previously reserved through btrfs_check_data_free_space(). As a consequence the mechanism for synchronizing NOCOW buffered writes with snapshotting gets broken. Fix this by always setting 'only_release_metadata' to false at the start of each iteration. Fixes: 8257b2dc ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume") Fixes: 7ee9e440 ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nuno Sá authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 4c35b7a5 ] The driver is defining debugfs entries by calling `adis16480_debugfs_init()`. However, those entries are attached to the iio_dev debugfs entry which won't exist if no debugfs_reg_access callback is provided. Fixes: 2f3abe6c ("iio:imu: Add support for the ADIS16480 and similar IMUs") Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit bd82873f ] spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d4570 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.comSigned-off-by:
-
Mika Westerberg authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit ce91f1a4 ] When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098 ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Henry Lin authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit f2c710f7 ] Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by:
Henry Lin <henryl@nvidia.com> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1858489 [ Upstream commit 100843f1 ] While v2.6.26 commit b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") is right that we don't want to flood the (payload) trace ring buffer, we don't trace successful FCP command responses by default. So we can include the channel log for problem determination with failed responses of any FSF request type. Fixes: b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") Fixes: a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Cc: <stable@vger.kernel.org> #2.6.38+ Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Dmitry Monakhov authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 6ff33d99 upstream. Write only quotas which are dirty at entry. XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dmitry Monakhov authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit df4bb5d1 upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 6039f37d upstream. The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Alastair D'Silva authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit f9ec1116 upstream. When calling __kernel_sync_dicache with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit a322b337 upstream. Several functions use for_each_child_of_node() loop with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 9a2c1c3b ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes") Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 6fbbcb05 upstream. In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: af99a750 ("pinctrl: Add pinctrl-s3c24xx driver") Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit b9ea0bae upstream. Certain ACPI-enumerated devices represented as platform devices in Linux, like fans, require special low-level power management handling implemented by their drivers that is not in agreement with the ACPI PM domain behavior. That leads to problems with managing ACPI fans during system-wide suspend and resume. For this reason, make acpi_dev_pm_attach() skip the affected devices by adding a list of device IDs to avoid to it and putting the IDs of the affected devices into that list. Fixes: e5cc8ef3 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Vamshi K Sthambamkadi authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 627ead72 upstream. kmemleak reported backtrace: [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260 [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0 [<1180f4fc>] i2c_register_adapter+0x186/0x400 [<6083baf7>] i2c_add_adapter+0x4e/0x70 [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915] [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915] [<81911d4b>] i915_pci_probe+0x48/0x160 [i915] [<4b159af1>] pci_device_probe+0xdc/0x160 [<b3c64704>] really_probe+0x1ee/0x450 [<bc029f5a>] driver_probe_device+0x142/0x1b0 [<d8829d20>] device_driver_attach+0x49/0x50 [<de71f045>] __driver_attach+0xc9/0x150 [<df33ac83>] bus_for_each_dev+0x56/0xa0 [<80089bba>] driver_attach+0x19/0x20 [<cc73f583>] bus_add_driver+0x177/0x220 [<7b29d8c7>] driver_register+0x56/0xf0 In i2c_acpi_remove_space_handler(), a leak occurs whenever the "data" parameter is initialized to 0 before being passed to acpi_bus_get_private_data(). This is because the NULL pointer check in acpi_bus_get_private_data() (condition->if(!*data)) returns EINVAL and, in consequence, memory is never freed in i2c_acpi_remove_space_handler(). Fix the NULL pointer check in acpi_bus_get_private_data() to follow the analogous check in acpi_get_data_full(). Signed-off-by:
Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Francesco Ruggeri authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 833a426c upstream. acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock before freeing the map. This creates a race condition the can result in the map being freed more than once. A panic can be caused by running for ((i=0; i<10; i++)) do for ((j=0; j<100000; j++)) do cat /sys/firmware/acpi/tables/data/BERT >/dev/null done & done This patch makes sure that only the process that drops the reference to 0 does the freeing. Fixes: b7c1fadd ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Zhenzhong Duan authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 918c1fe9 upstream. Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has a driver different from drv already and, if so, return -EBUSY before updating any cpuidle_drivers per-CPU pointers. Fixes: 82467a5a ("cpuidle: simplify multiple driver support") Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 1091eb83 upstream. If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 11609a7e upstream. If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Denis Efremov authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 315cee42 upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Aleksa Sarai authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit a713af39 upstream. Because pids->limit can be changed concurrently (but we don't want to take a lock because it would be needlessly expensive), use atomic64_ts instead. Fixes: commit 49b786ea ("cgroup: implement the PIDs subsystem") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Aleksa Sarai <cyphar@cyphar.com> Signed-off-by:
-
Ming Lei authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 8962842c upstream. It is reported that sysfs buffer overflow can be triggered if the system has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of hctx via /sys/block/$DEV/mq/$N/cpu_list. Use snprintf to avoid the potential buffer overflow. This version doesn't change the attribute format, and simply stops showing CPU numbers if the buffer is going to overflow. Cc: stable@vger.kernel.org Fixes: 676141e4("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by:
-
Pawel Harlozinski authored
BugLink: https://bugs.launchpad.net/bugs/1858489 commit 8f157d4f upstream. Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by:
Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
