- 24 May, 2017 40 commits
-
-
Dan Carpenter authored
We only want to disable this if bt_disable_cnt is >= 2. Fixes: f66509e3 ("rtlwifi: btcoex: Remove 23b 1ant configuration parameter") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Yan-Hsuan Chuang authored
When wifi is under concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Fine tune the parameters in case of act_bt_sco_hid_only_busy. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Fine tune the parameters in cases of scan, assoc and auth when wifi isn't connected. Signed-off-by:
-
Ping-Ke Shih authored
Fine tune the parameters in cases of bt_acl_busy and scan when wifi is connected. Signed-off-by:
-
Ping-Ke Shih authored
Set register settings for coex table fine tune. Signed-off-by:
-
Ping-Ke Shih authored
Display coex_table_type in log. Signed-off-by:
-
Ping-Ke Shih authored
Simplify the debug trace log. Signed-off-by:
-
Ping-Ke Shih authored
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by:
-
Ping-Ke Shih authored
Add the definition of wifi in high priority task for bt inquiry. According to driver's notifications, btc will knows whether wifi is in high priority tasks or not. Signed-off-by:
-
Ping-Ke Shih authored
Count and log special packets of DHCP, EAPOL and ARP, and check whether the interface is in 4-way handshake. Signed-off-by:
-
Ping-Ke Shih authored
Force antenna setup for no scan result issue Signed-off-by:
-
Ping-Ke Shih authored
When association starts, force antenna setup for no scan result issue. Signed-off-by:
-
Ping-Ke Shih authored
If driver announce wifi RF status is off, btc can switch antenna to BT. Signed-off-by:
-
Ping-Ke Shih authored
If BT is under WHCK, we enter a special mode. Signed-off-by:
-
Ping-Ke Shih authored
BT FW provide more BT status as clues, thus we also display them in coex log to help debug in field. Signed-off-by:
-
Ping-Ke Shih authored
This change is highly related to init_hwconfig that was decomposed into two parts for better program flow. Signed-off-by:
-
Ping-Ke Shih authored
In case of wifi_only, we can simply switch antenna to wifi. Signed-off-by:
-
Ping-Ke Shih authored
The larger the bt a2dp bit pool is, the more time bt needs to receive them. If we do not adjust the wifi duration, the voice quality will be low. Hence we reduce the time that wifi holds, to improve the a2dp service. If the bt is slave, it may receive a packet at any time, so we need to mark them as high priority packets in case of packet loss Signed-off-by:
-
Ping-Ke Shih authored
Log the scan procedure, and update ap_num for future usage when scan done. Signed-off-by:
-
Ping-Ke Shih authored
Since wifi and BT share the same physical antenna, we should switch antenna to fit every situation. Signed-off-by:
-
Tom Gaudasinski authored
Make Epson WN7512BEP work by adding its device-id to rt2800usb. Device contains a Ralink RT3071L, registers as vendor Accton/Arcadyan. Signed-off-by:
Tom Gaudasinski <tomg@records.headdesk.com.au> Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Michael Büsch <m@bues.ch> Signed-off-by:
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_desc_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<_rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2800_eeprom_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2800_eeprom_read\(_from_array\|\)\>(.*, .*\), &\(.*\));:\3 = \1);:' drivers/net/wireless/ralink/rt2x00/rt2800lib.c Some manual tweaking was required here to work around the line wraps. Signed-off-by:
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_eeprom_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_eeprom_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt2x00_eeprom_read\):= \1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by:
-
Arnd Bergmann authored
This is a semi-automated conversion to change *_bbp_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt.*_bbp_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt.*_bbp_dcoc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt.*_bbp_read\):\1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: -
Arnd Bergmann authored
This is a semi-automated conversion to change rt2800_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ 's:\(rt2800_register_read_lock(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c The function itself was modified manually along with the one remaining multi-line caller that was not covered automatically and the indirect reference. Signed-off-by: -
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00usb_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read_lock\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/* Signed-off-by: -
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00mmio_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2x00mmio_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:_rt2x00mmio_register_read:rt2x00mmio_register_read:' \ drivers/net/wireless/ralink/rt2x00/*.c The function itself was modified manually along with the one remaining caller that was not covered automatically. Signed-off-by: -
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_rf_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_rf_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by:
-
Arnd Bergmann authored
With CONFIG_KASAN enabled and gcc-7, we get a warning about rather high stack usage (with a private patch set I have to turn on this warning, which I intend to get into the next kernel release): wireless/ralink/rt2x00/rt2800lib.c: In function 'rt2800_bw_filter_calibration': wireless/ralink/rt2x00/rt2800lib.c:7990:1: error: the frame size of 2144 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The problem is that KASAN inserts a redzone around each local variable that gets passed by reference, and the newly added function has a lot of them. This is a semi-automated conversion to change rt2800_rfcsr_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_rfcsr_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(rt2800_rfcsr_read_bank(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c Fixes: 41977e86 ("rt2x00: add support for MT7620") Signed-off-by: -
Arnd Bergmann authored
This prepares the driver for changing all the 'read' register accessors to return the value instead of passing it by reference. Since a lot of them are used in callbacks, this takes care of the callbacks first, adding a couple of helpers that will be removed again one at a time. Signed-off-by:
-
Kees Cook authored
In at least one place, the enter/exit debugging was not being correctly matched. Based on mailing list feedback, it was desired to drop all of these in favor of using ftrace instead. Suggested-by:
Joe Perches <joe@perches.com> Suggested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, redefine the stat strings to be ETH_GSTRING_LEN sizes, like other drivers. This lets us use a single memcpy that does not leak rodata contents. Additionally adjust indentation to keep checkpatch.pl happy. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
-
Stanislaw Gruszka authored
iwlegacy firmware can crash when power save is configured. PS was allowed in "dbdac2b5 iwlegacy: properly enable power saving" with belive that user who enable PS is aware of that and can relate firmware crahes with PS. However some distributions seems to enable PS without user intervention, so warn about that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Cc: stable@vger.kernel.org Signed-off-by:
-
Karim Eshapa authored
Use time_after kernel macro for time comparison. Signed-off-by:
Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by:
-
Prameela Rani Garnepudi authored
The older firmware loading method is not usable by any Redpine chipset. Hence removing that part of the code. Older firmware image with rsi_91x.fw name is deprecated Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
-
Prameela Rani Garnepudi authored
The older firmware loading method has been deprecated and not in use for any chipets. New method is introduced which works based on soft boot loader. In this method, complete RAM image and FLASH image are present in the flash. Before loading the functional firmware, host issues boot loader commands to verify whether firmware to load is different from the current functional firmware. If not, firmware upgrade progresses and boot loader will switch to the new functional firmware. "rs9113_wlan_qspi.rps" is the firmware filename used in this patch. Signed-off-by:
-
