- 22 Aug, 2013 4 commits
-
-
Takashi Iwai authored
Fixing warning message: sound/pci/rme96.c: In function ‘snd_rme96_resume’: sound/pci/rme96.c:2418:19: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
The headphone automute on this machine triggers annoying pop noises. It seems that only the first DAC can be used, the secondary DAC always results in this problem. This patch disables the secondary DAC with a few additional workarounds. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Fixed ALC283 D3 to D0 and D0 to D3 Headphone pop noise. The previous fix [c5177c86: ALSA: hda - Fix the noise after suspend on ALC283 codec] doesn't work sufficiently for some laptops. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Knut Petersen authored
Without proper power management handling, the first use of a Digi96/8 anytime after a suspend / resume cycle will start playback with distortions. v3: Abort if vmalloc() of suspend buffers fail, but do not leak memory in that case. [fixed wrong memory leak fix again -- tiwai] Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Aug, 2013 7 commits
-
-
Adrian Knoth authored
Use struct hdspm_ltc to query the LTC, using a mixer struct is just plain wrong. Due to the wrong struct, this ioctl was never working, so we're free to fix it without breaking userspace compatibility. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
This patch doesn't change functionality, it only improves readability and fixes a copy&paste error in a comment. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Use enum hdspm_ltc_format's fps_30 (corresponds to 4) instead of 30, Other case branches return 1, 2 or 3 respectively, so 30 obviously is wrong. Since SNDRV_HDSPM_IOCTL_GET_LTC had never been working due to a copy&paste error in hdspm.h, this change doesn't break userspace. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tim Gardner authored
The use of snd_printd_ratelimit() supresses superfluous output from printk_ratelimit() when CONFIG_SND_DEBUG is not defined. For example, [ 43.753692] snd_pcm_update_hw_ptr0: 26 callbacks suppressed [ 48.822131] snd_pcm_update_hw_ptr0: 25 callbacks suppressed [ 53.894953] snd_pcm_update_hw_ptr0: 25 callbacks suppressed [ 58.997761] snd_pcm_update_hw_ptr0: 25 callbacks suppressed [ 64.100952] snd_pcm_update_hw_ptr0: 25 callbacks suppressed fills the log even when no debug output is actually produced. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tim Gardner authored
Direct calls to printk_limit() will emit log noise even when CONFIG_SND_DEBUG is not defined. Add a wrapper macro around printk_limit() that is conditionally defined by CONFIG_SND_DEBUG. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
If compiled without CONFIG_SND_HDA_I915, the audio driver cannot request power well. However, if the power well is on for other reasons, maybe audio can still work. Therefore, do not skip the card completely if compiled without CONFIG_SND_HDA_I915. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
The higher mic boosts (on internal mic) are so noisy they're unusable in practice. BugLink: https://bugs.launchpad.net/bugs/1213820Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Aug, 2013 2 commits
-
-
David Henningsson authored
This just cleans up the table, no functional changes. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
The internal mic boost is so noisy on boosts 2 and 3 so they are unusable in practice. BugLink: https://bugs.launchpad.net/bugs/1213055Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Aug, 2013 1 commit
-
-
Knut Petersen authored
The hardware does support synchronized start/pause/stop of pcm streams, so there is no reason not to add that feature after more than ten years. Some minor coding style / white space fixes in the surroundings of the changes. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 13 Aug, 2013 2 commits
-
-
Takashi Iwai authored
The current generic parser code assumes that always a pin widget controls the mute for an output blindly although it might be a different widget in the middle. Instead of the fixed assumption, check each parsed path and just pick up the right widget that has been already defined as a mute control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The auto-mute using the amp currently works only for a single amp on a pin. Make it working also with HDA_CTL_BIND_MUTE type, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Aug, 2013 1 commit
-
-
Vinod Koul authored
add missing uapi/ headers and Documentation files Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Aug, 2013 1 commit
-
-
Mark Brown authored
Help ensure that Vinod gets included in review of compressed audio patches by adding a MAINTAINERS entry for it. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Aug, 2013 1 commit
-
-
Dan Carpenter authored
We don't actually use the "go" variable so it can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Aug, 2013 1 commit
-
-
Andy Shevchenko authored
There is no need to pass constants via stack. The width may be explicitly specified in the format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Aug, 2013 9 commits
-
-
Eldad Zack authored
Prevent NULL dereference in snd_usb_add_endpoints(), when alts is passed as NULL. In this case, WARN (since this is a non-fatal bug) and return NULL ep. Call sites treat a NULL return value as an error. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Since the quirks all apply to implicit feedback (the source endpoint is always a data endpoint), there's no need to set and check a flag for it. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
An implicit feedback endpoint can only be a capture source. The consumer (sink) of the implicit feedback endpoint is therefore limited to playback EPs. Check if the target endpoint is a playback first and remove redundant checks. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Since implicit_fb is not changed, !implicit_fb will always be true - it is set only after these checks. Similarly, there's also no need to set it at the top of the function. Change the type of implicit_fb to bool (more appropriate). Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Reverse logic on the conditions required to qualify for a sync endpoint and remove one level of indendation. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Separate setting implicit feedback quirks from setting a sync endpoint (which may also be explicit feedback or async). Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Setting the sync endpoint currently takes up about half of set_format(). Move it to a dedicated function. No functional change. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Following general kernel style. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eldad Zack authored
Code block does not compile when enabled. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Aug, 2013 1 commit
-
-
Chih-Chung Chang authored
The snd_hda_jack_set_gating_jack() call didn't work when auto_{mute,mic} is suppressed because (1) am_entry is not filled with nid of the mic pin. (2) The jacks are not created (by snd_hda_jack_detect_enable_callback) before the snd_hda_jack_set_gating_jack call. Now we use the first input pin nid directly, and create the jack if it doesn't exist yet. Signed-off-by: Chih-Chung Chang <chihchung@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Jul, 2013 6 commits
-
-
Takashi Iwai authored
VAIO-Z laptops need to use the specific DAC for the speaker output by some unknown reason although the codec itself supports the flexible connection. So we implemented a workaround by a new flag, no_primary_hp, for assigning the speaker pin first. This worked until 3.8 kernel, but it got broken because the driver learned for a better multi-io pin mapping, and not it can assign two mic pins for multi-io. Since the multi-io requires to be the primary output, the hp and two mic pins are assigned in prior to the speaker in the end. Although the machine has two mic pins, one of them is used as a noise- canceling headphone, thus it's no real retaskable mic jack. Thus, at best, we can disable the multi-io assignment and make the parser behavior back to the state before the multi-io. This patch adds again a new flag, no_multi_io, to indicate that the device has no multi-io capability, and set it in the fixup for VAIO-Z. The no_multi_io flag itself can be used generically, added via a helper line, too. Reported-by: Tormen <my.nl.abos@gmail.com> Reported-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The current fixup for dell-bios model with STAC9228 codec contains the override of pin 0x0c for analog mic. But this is actually just adding a bogus pin and confuses the parser. Better to remove it for the auto-mic switching. Meanwhile, for a possible regression, keep the old configuration as model=dell-bios-amic, so that people can test it again quickly. Tested on Dell 1420n laptop. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wang Xingchao authored
With runtime power save feature enabled, Headphone hotplug event will not be detected while controller/codec in D3. HDA has feature WAKEEN to let codec wake up system if controller is in D3 or system in S3.(HDA Spec 4.5.9.2/3). Codec can send out INT or wake up controller depending on whether CIE or GIE enabled.(Figure 4, Interupt structure). The controller must be in RESET mode after enter runtime-suspend, otherwise it will not be waken up even if codec send out wake-up event. And STATESTS will be cleared after controller brought out of RESET mode. This patch only enable WAKEEN for runtime-suspend(Controller D3) mode, not for system S3 mode. with tool "evtest", Headphone hotplug events could be cought and reported successfully. [fixed an unused variable warning by tiwai] Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wang Xingchao authored
With jackpoll_interval != 0, it's used to poll jack event periodically in a delayed work. if it's 0, give the caller chance to probe jack status but will not restart the delayed work. In the next patch which enable WAKEEN feature, HDA controller was able to wake up system when it's in D3, it's useful to detect Jack hotplug event and notify userspace. By default the jackpoll_interval=0, this patch let jack poll once without starting the delayed work. Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wang Xingchao authored
Clearing jackpoll_interval before calling cancel_delayed_work_sync(), otherwise the work will be triggered again and cause impact in hda_jackpoll_work(). The next patch will poll jack once even with jackpoll_interval=0. Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dan Carpenter authored
The test here is always true because S[i].urb is an array not a pointer. Also it's bogus because the intent was to test: if (S->urb[i]) { instead of: if (S[i].urb) { Anyway, usb_kill_urb() and usb_free_urb() accept NULL pointers so we can just remove this. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Jul, 2013 3 commits
-
-
Wang Xingchao authored
Register STATESTS is 16-bit length, use correct API for read/write. Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
When the power state of ALC283 codec goes to D3, it gives a noise via headphone output. This is because the driver tries to clear all pins via snd_hda_shutup_pins(). Setting the mic pin to zero triggers such a noise. Define a new shutup call specific to this codec and control the pins there more precisely. Also, add the power-save enable/disable sequences in the resume and the new shutup calls. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Instead of calling snd_hda_shutup_pins() unconditionally, allow it be called in spec->shutup callback. In this way, we can avoid calling this function if it causes a problem like we see in the next patch following this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 21 Jul, 2013 1 commit
-
-
Jingoo Han authored
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-