- 28 Oct, 2014 18 commits
-
-
David S. Miller authored
Amir Vadai says: ==================== Mellanox ethernet driver update Oct-27-2014 This patchset introduces some small bug fixes, support in get/set of vlan offload and get/set/capabilities of the link. First 7 patches by Saeed, add support in setting/getting link speed and getting cable capabilities. Next 2 patches also by Saeed, enable the user to turn rx/tx vlan offloading on and off. Jenni fixed a bug in error flow during device initalization. Ido and Jack fixed some code duplication and errors discovered by static checker. last patch by me is a fix to make ethtool report the actual rings used by indirection QP. Patches were applied and tested against commit 61ed53de ("Merge tag 'ntb-3.18' of git://github.com/jonmason/ntb") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Hardware requires the number of rings in indirection table to be a power of 2. When setting number of channels to a non power of 2 number, indirection table is using only the closest power of 2 rings. Report this number in 'ethtool -x' and not the total number of rx rings. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
Upon failures, destroy_netdev is called, and spinlocks/works must be initialized before calling it. Otherwise kernel panic may occur. Signed-off-by:
-
Ido Shamay authored
This is instead of calling the actual implementation of napi_synchronize, for better encapsulation. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
clang flagged the following. All are actually cosmetic cleanups, not really bugs: drivers/net/ethernet/mellanox/mlx4/en_main.c:233:3: warning: Value stored to 'err' is never read err = -ENOMEM; ^ ~~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_main.c:293:3: warning: Value stored to 'err' is never read err = -ENOMEM; drivers/net/ethernet/mellanox/mlx4/en_netdev.c:648:16: warning: Assigned value is garbage or undefined entry->reg_id = reg_id; ^ ~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_netdev.c:659:2: warning: Function call argument is an uninitialized value mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id); (NOTE: reg_id is only used in the device-managed flow steering path, in which is it always initialized. This is not a bug. Cleanup here is therefore cosmetic only). drivers/net/ethernet/mellanox/mlx4/en_rx.c:122:3: warning: Value stored to 'frag_info' is never read frag_info = &priv->frag_info[i]; ^ ~~~~~~~~~~~~~~~~~~~ Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Saeed Mahameed authored
Move mlx4_en_reset_config to en_netdev.c as it now serves more general purpose. Add support for turning OFF/ON the rx/tx vlan offlad. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Rename mlx4_en_timestamp_config to mlx4_en_reset_config and extend it to support choosing RX vlan offload configuration. Signed-off-by:
-
Saeed Mahameed authored
Added Support to set speed or advertised link modes via ethtool: ethtool -s <ifname> [speed <speed>] [advertise <link modes>] Signed-off-by:
-
Saeed Mahameed authored
- If dev cap MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL is ON, query PTYS register to fill ethtool settings. else use default values. - Use autoneg port cap and dev backplane autoneg cap to reprort autoneg interface capbilities. - Fix typo in mlx4_en_port_state struct field (transciver to transceiver). Signed-off-by:
-
Saeed Mahameed authored
Added 100M, 20G and 56G ethtool speed reporting support. Update mlx4_en_test_speed self test with the new speeds. Defined new link speeds in include/uapi/linux/ethtool.h: +#define SPEED_20000 20000 +#define SPEED_40000 40000 +#define SPEED_56000 56000 Signed-off-by:
-
Saeed Mahameed authored
Signed-off-by:
-
Saeed Mahameed authored
Adding ACCESS REG mlx4 command and use it to implement Query method for PTYS (Port Type and Speed Register). Query and store eth_prot_ctrl dev cap. Signed-off-by:
-
Saeed Mahameed authored
Added support for get_module_info/get_module_eeprom ethtool support for cable info reading. Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use. +#define ETH_MODULE_SFF_8636 0x3 +#define ETH_MODULE_SFF_8636_LEN 256 +#define ETH_MODULE_SFF_8436 0x4 +#define ETH_MODULE_SFF_8436_LEN 256 Signed-off-by:
-
Saeed Mahameed authored
Added new MAD_IFC command to read cable module info with attribute id (0xFF60). Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info) and the needed defines/enums for future use. Signed-off-by:
-
Simon Horman authored
The original motivation for this change was to allow the helper to be used in files other than actions.c as part of work on an odp select group action. It was as pointed out by Thomas Graf that this helper would be best off living in netlink.h. Furthermore, I think that the generic nature of this helper means it is best off in netlink.h regardless of if it is used more than one .c file or not. Thus, I would like it considered independent of the work on an odp select group action. Cc: Thomas Graf <tgraf@suug.ch> Cc: Pravin Shelar <pshelar@nicira.com> Cc: Andy Zhou <azhou@nicira.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Thomas Graf <tgraf@noironetworks.com> Signed-off-by:
-
Sebastian Hesselbarth authored
Do not add phy include to the board file but platform_data include instead. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Viet Nga Dao authored
Additional code to m88e1145_config_init function to allow the driver to support SGMII mode. Signed-off-by:
Viet Nga Dao <vndao@altera.com> Signed-off-by:
-
Thomas Graf authored
The internal and netdev vport remain part of openvswitch.ko. Encap vports including vxlan, gre, and geneve can be built as separate modules and are loaded on demand. Modules can be unloaded after use. Datapath ports keep a reference to the vport module during their lifetime. Allows to remove the error prone maintenance of the global list vport_ops_list. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 27 Oct, 2014 21 commits
-
-
David S. Miller authored
Varka Bhadram says: ==================== cleanup on resource check This series removes the duplication of sanity check for platform_get_resource() return resource. It will be checked with devm_ioremap_resource() changes since v2: - Merge #1 and #2 patches into single patch - remove the comment changes since v1: - remove NULL dereference on resource_size() ==================== Signed-off-by: -
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
Varka Bhadram <varkab@cdac.in> Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Kyeyoon Park authored
This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by:
Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by:
-
Fabian Frederick authored
Let compiler decide what to do with static void __ipxitf_put() Suggested-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
use %08X instead of %08lX and remove casting. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Fabian Frederick authored
include ipx.h from sysctl_net_ipx.c Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
unsigned char *sha (source) was already in original git version but was never used. Signed-off-by:
-
David S. Miller authored
Frank Blaschka says: ==================== s390: network patches for net-next looks like there was a problem with my previous posting. Hope this time it will work. Sorry for any inconvenience. The patches are mostly cleanups and small enhancements for net-next ==================== Signed-off-by: -
Thomas Richter authored
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Richter authored
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by:
-
Thomas Richter authored
Compile the s390 10GB ethernet device driver only when ETHERNET has been defined in the kernel configuration file. Right now the qeth device driver is always built regardless of which network connectivity is active. Signed-off-by:
-
Thomas Richter authored
This patch makes 4 local functions static and removes the prototypes from the header file. Signed-off-by:
-
Thomas Richter authored
This patch fixes trace formatting issues using the QETH_CARD_TEXT_ macro. The total size of each trace entry is 8 bytes. Some of the sprintf formats exceed these 8 bytes (for example using abcd:%d and the converted value needs more than 3 bytes). The solution is to shorten the text prepending the value or use a different format (%x). Signed-off-by:
-
Thomas Richter authored
This patch makes some global functions static and removes the prototypes from the header file. Also function qeth_query_card_info is not exported anymore, there is no external user for it, this function should never have been exported in the first place. Signed-off-by:
-
David Vrabel authored
A full Rx ring only requires 1 MiB of memory. This is not enough memory that it is useful to dynamically scale the number of Rx requests in the ring based on traffic rates, because: a) Even the full 1 MiB is a tiny fraction of a typically modern Linux VM (for example, the AWS micro instance still has 1 GiB of memory). b) Netfront would have used up to 1 MiB already even with moderate data rates (there was no adjustment of target based on memory pressure). c) Small VMs are going to typically have one VCPU and hence only one queue. Keeping the ring full of Rx requests handles bursty traffic better than trying to converge on an optimal number of requests to keep filled. On a 4 core host, an iperf -P 64 -t 60 run from dom0 to a 4 VCPU guest improved from 5.1 Gbit/s to 5.6 Gbit/s. Gains with more bursty traffic are expected to be higher. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
- 25 Oct, 2014 1 commit
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== sunvnet: NAPIfy sunvnet This patchset converts the sunvnet driver to use the NAPI framework. Changes since v4 to Patch1: vnet_event accumulates LDC_EVENT_* bits into rx_event. vnet_event_napi() unrolls send_events() logic to process all rx_event bits. Changes since v5: Patch 1: use net_device.h definition for NAPI_POLL_WEIGHT. Drop sparclinux changes (patch3) per David Miller feedback Patch 1 in the series addresses the packet-receive path- all the vnet_event() processing is moved into NAPI context. This patch is dependant on the sparc-next commit: "sparc64: Add vio_set_intr() to enable/disable Rx interrupts" (sparc commit id ca605b7d) Patch 2 uses RCU to fix race conditions between vnet_port_remove and paths that access/modify port-related state, such as vnet_start_xmit. Patch 3 leverages from the NAPIfied Rx path, dropping superfluous usage of the irqsave/irqrestores on the vio.lock where possible. ==================== Signed-off-by:
-
