- 18 Apr, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-16 (ice) This series contains updates to ice driver only. Michal fixes a couple of issues with TC filter parsing; always add match for src_vsi and remove flag check that could prevent addition of valid filters. Marcin adds additional checks for unsupported flower filters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ==================== Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Apparently it's more legal to pass the format as NULL, than it is to use an empty string. Clang complains about empty formats: ./../kselftest_harness.h:1207:30: warning: format string is empty [-Wformat-zero-length] 1207 | diagnostic ? "%s" : "", diagnostic); | ^~ 1 warning generated. Reported-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com Fixes: 378193ef ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic") Tested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. Reported-by: Mingshuai Ren <renmingshuai@huawei.com> Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/ Fixes: 3bcb846c ("net: get rid of spin_trylock() in net_tx_action()") Fixes: e578d9c0 ("net: sched: use counter to break reclassify loops") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 17 Apr, 2024 5 commits
-
-
Gerd Bayer authored
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only, and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/ Fixes: c08004ee ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'mr7530-fixes' Arınç ÜNAL says: ==================== Fix port mirroring on MT7530 DSA subdriver This patch series fixes the frames received on the local port (monitor port) not being mirrored, and port mirroring for the MT7988 SoC switch. ==================== Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-
Arınç ÜNAL authored
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU forward control register. Currently, the MT7530 DSA subdriver configures bits 0 to 2 of the CPU forward control register which breaks the port mirroring feature for the MT7988 SoC switch. Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET() macros which utilise the correct bits. Fixes: 110c18bf ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arınç ÜNAL authored
This switch intellectual property provides a bit on the ARL global control register which controls allowing mirroring frames which are received on the local port (monitor port). This bit is unset after reset. This ability must be enabled to fully support the port mirroring feature on this switch intellectual property. Therefore, this patch fixes the traffic not being reflected on a port, which would be configured like below: tc qdisc add dev swp0 clsact tc filter add dev swp0 ingress matchall skip_sw \ action mirred egress mirror dev swp0 As a side note, this configuration provides the hairpinning feature for a single port. Fixes: 37feab60 ("net: dsa: mt7530: add support for port mirroring") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lei Chen authored
vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a5 ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Apr, 2024 12 commits
-
-
Marcin Szycik authored
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing. Without these checks, it would be possible to add filters with tunnel options on non-tunnel devices. enc_* options are only valid for tunnel devices. Example: devlink dev eswitch set $PF1_PCI mode switchdev echo 1 > /sys/class/net/$PF1/device/sriov_numvfs tc qdisc add dev $VF1_PR ingress ethtool -K $PF1 hw-tc-offload on tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop Fixes: 9e300987 ("ice: VXLAN and Geneve TC support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Swiatkowski authored
The check for flags is done to not pass empty lookups to adding switch rule functions. Since metadata is always added to lookups there is no need to check against the flag. It is also fixing the problem with such rule: $ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \ enc_dst_port 2123 action drop Switch block in case of GTP can't parse the destination port, because it should always be set to GTP specific value. The same with ethertype. The result is that there is no other matching criteria than GTP tunnel. In this case flags is 0, rule can't be added only because of defensive check against flags. Fixes: 9a225f81 ("ice: Support GTP-U and GTP-C offload in switchdev") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Swiatkowski authored
In case of traffic going from the VF (so ingress for port representor) source VSI should be consider during packet classification. It is needed for hardware to not match packets from different ports with filters added on other port. It is only for "from VF" traffic, because other traffic direction doesn't have source VSI. Set correct ::src_vsi in rule_info to pass it to the hardware filter. For example this rule should drop only ipv4 packets from eth10, not from the others VF PRs. It is needed to check source VSI in this case. $tc filter add dev eth10 ingress protocol ip flower skip_sw action drop Fixes: 0d08a441 ("ice: ndo_setup_tc implementation for PF") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Paolo Abeni authored
Serge Semin says: ==================== net: stmmac: Fix MAC-capabilities procedure The series got born as a result of the discussions around the recent Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000 MACs support: Link: https://lore.kernel.org/netdev/fu3f6uoakylnb6eijllakeu5i4okcyqq7sfafhp5efaocbsrwe@w74xe7gb6x7p In particular the Yanteng' patchset needed to implement the Loongson MAC-specific constraints applied to the link speed and link duplex mode. As a result of the discussion with Russel the next preliminary patch was born: Link: https://lore.kernel.org/netdev/df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn The patch above was a temporal solution utilized by Yanteng for further developments and to move on with the on-going review. This patchset is a refactored version of that single patch with formatting required for the fixes patches. In particular the series starts with fixing the half-duplex-less constraint currently applied for all IP-cores. In fact it's specific for the DW QoS Eth only (DW GMAC v4.x/v5.x). The next patch fixes the MAC-capabilities setting up during the active Tx/Rx queues re-initialization procedure. Particularly the procedure missed the max-speed limit thus possibly activating speeds prohibited on the respective platforms. Third patch fixes the incorrect MAC-capabilities initialization for DW MAC100, DW XGMAC and DW XLGMAC devices by moving the correct initialization to the IP-core specific setup() methods. That's it for now. Thanks for review and testing in advance. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Simon Horman <horms@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Samuel Holland <samuel@sholland.org> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@lists.linux.dev Cc: linux-kernel@vger.kernel.org ==================== Link: https://lore.kernel.org/r/20240412180340.7965-1-fancer.lancer@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Serge Semin authored
Here is the list of the MAC capabilities specific to the particular DW MAC IP-cores currently supported by the driver: DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD if there is more than 1 active Tx/Rx queues: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD As you can see there are only two common capabilities: MAC_ASYM_PAUSE | MAC_SYM_PAUSE. Meanwhile what is currently implemented defines 10/100/1000 link speeds for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC and DW XLGMAC devices. Seeing the flow-control is implemented as a callback for each MAC IP-core (see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(), etc) and since the MAC-specific setup() method is supposed to be called for each available DW MAC-based device, the capabilities initialization can be freely moved to these setup() functions, thus correctly setting up the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A new stmmac_link::caps field was specifically introduced for that so to have all link-specific info preserved in a single structure. Note the suggested change fixes three earlier commits at a time. The commit 5b0d7d7d ("net: stmmac: Add the missing speeds that XGMAC supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW XGMAC IP-core even though it doesn't support them. The commit df7699c7 ("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000 capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit 8a880936 ("net: stmmac: Add XLGMII support") incorrectly permitted the 10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core. Fixes: 5b0d7d7d ("net: stmmac: Add the missing speeds that XGMAC supports") Fixes: df7699c7 ("net: stmmac: Do not cut down 1G modes") Fixes: 8a880936 ("net: stmmac: Add XLGMII support") Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Serge Semin authored
It's possible to have the maximum link speed being artificially limited on the platform-specific basis. It's done either by setting up the plat_stmmacenet_data::max_speed field or by specifying the "max-speed" DT-property. In such cases it's required that any specific MAC-capabilities re-initializations would take the limit into account. In particular the link speed capabilities may change during the number of active Tx/Rx queues re-initialization. But the currently implemented procedure doesn't take the speed limit into account. Fix that by calling phylink_limit_mac_speed() in the stmmac_reinit_queues() method if the speed limitation was required in the same way as it's done in the stmmac_phy_setup() function. Fixes: 95201f36 ("net: stmmac: update MAC capabilities when tx queues are updated") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Serge Semin authored
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues enabled: DW GMAC v3.7+ with AV feature, DW QoS Eth v4.x/v5.x, DW XGMAC/XLGMAC Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't support the half-duplex link mode in case if more than one queues enabled: "In multiple queue/channel configurations, for half-duplex operation, enable only the Q0/CH0 on Tx and Rx. For single queue/channel in full-duplex operation, any queue/channel can be enabled." The rest of the IP-cores don't have such constraint. Thus in order to have the constraint applied for the DW QoS Eth MACs only, let's move the it' implementation to the respective MAC-capabilities getter and make sure the getter is called in the queues re-init procedure. Fixes: b6cfffa7 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Dmitry Safonov via says: ==================== selftests/net/tcp_ao: A bunch of fixes for TCP-AO selftests Started as addressing the flakiness issues in rst_ipv*, that affect netdev dashboard. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> ==================== Link: https://lore.kernel.org/r/20240413-tcp-ao-selftests-fixes-v1-0-f9c41c96949d@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Dmitry Safonov authored
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces > lib/setup.c: In function ‘__test_msg’: > lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security] > 20 | ksft_print_msg(buf); > | ^~~~~~~~~~~~~~ > lib/setup.c: In function ‘__test_ok’: > lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security] > 26 | ksft_test_result_pass(buf); > | ^~~~~~~~~~~~~~~~~~~~~ > lib/setup.c: In function ‘__test_fail’: > lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security] > 32 | ksft_test_result_fail(buf); > | ^~~~~~~~~~~~~~~~~~~~~ > lib/setup.c: In function ‘__test_xfail’: > lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security] > 38 | ksft_test_result_xfail(buf); > | ^~~~~~~~~~~~~~~~~~~~~~ > lib/setup.c: In function ‘__test_error’: > lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security] > 44 | ksft_test_result_error(buf); > | ^~~~~~~~~~~~~~~~~~~~~~ > lib/setup.c: In function ‘__test_skip’: > lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security] > 50 | ksft_test_result_skip(buf); > | ^~~~~~~~~~~~~~~~~~~~~ > cc1: some warnings being treated as errors As the buffer was already pre-printed into, print it as a string rather than a format-string. Fixes: cfbab37b ("selftests/net: Add TCP-AO library") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Dmitry Safonov authored
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces: > lib/proc.c: In function ‘netstat_read_type’: > lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security] > 89 | if (fscanf(fnetstat, type->header_name) == EOF) > | ^~ > cc1: some warnings being treated as errors Here the selftests lib parses header name, while expectes non-space word ending with a column. Fixes: cfbab37b ("selftests/net: Add TCP-AO library") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Dmitry Safonov authored
The structure is on the stack and has to be zero-initialized as the kernel checks for: > if (in.reserved != 0 || in.reserved2 != 0) > return -EINVAL; Fixes: b2666053 ("selftests/net: Add test for TCP-AO add setsockopt() command") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Dmitry Safonov authored
Currently, "active reset" cases are flaky, because select() is called for 3 sockets, while only 2 are expected to receive RST. The idea of the third socket was to get into request_sock_queue, but the test mistakenly attempted to connect() after the listener socket was shut down. Repair this test, it's important to check the different kernel code-paths for signing RST TCP-AO segments. Fixes: c6df7b23 ("selftests/net: Add TCP-AO RST test") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 15 Apr, 2024 2 commits
-
-
Asbjørn Sloth Tønnesen authored
Upon reviewing the flower control flags handling in this driver, I notice that the key wasn't being used, only the mask. Ie. `tc flower ... ip_flags nofrag` was hardware offloaded as `... ip_flags frag`. Only compile tested, no access to HW. Fixes: c672e372 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit under Fixes optimized the number of recv() calls needed during RTM_GETROUTE dumps, but we got multiple reports of applications hanging on recv() calls. Applications expect that a route dump will be terminated with a recv() reading an individual NLM_DONE message. Coalescing NLM_DONE is perfectly legal in netlink, but even tho reporters fixed the code in respective projects, chances are it will take time for those applications to get updated. So revert to old behavior (for now)? Old kernel (5.19): $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 692 bytes, 11 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 Recv: read 20 bytes, 1 messages nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 Before (6.9-rc2): $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 712 bytes, 12 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 After: $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 692 bytes, 11 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 Recv: read 20 bytes, 1 messages nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 Reported-by: Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/all/20240315124808.033ff58d@elisabethReported-by: Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/all/02b50aae-f0e9-47a4-8365-a977a85975d3@ovn.org Fixes: 4ce5dc93 ("inet: switch inet_dump_fib() to RCU protection") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Apr, 2024 1 commit
-
-
Yuri Benditovich authored
The commit fc8b2a61 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") adds check of potential number of UDP segments vs UDP_MAX_SEGMENTS in linux/virtio_net.h. After this change certification test of USO guest-to-guest transmit on Windows driver for virtio-net device fails, for example with packet size of ~64K and mss of 536 bytes. In general the USO should not be more restrictive than TSO. Indeed, in case of unreasonably small mss a lot of segments can cause queue overflow and packet loss on the destination. Limit of 128 segments is good for any practical purpose, with minimal meaningful mss of 536 the maximal UDP packet will be divided to ~120 segments. The number of segments for UDP packets is validated vs UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect quest-to-guest path but does affect packets sent to host, for example. It is important to mention that UDP_MAX_SEGMENTS is kernel-only define and not available to user mode socket applications. In order to request MSS smaller than MTU the applications just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is no limitations on socket API level. Fixes: fc8b2a61 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Apr, 2024 11 commits
-
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 fixes This patchset provides bug fixes to mlx5 core and Eth drivers. ==================== Link: https://lore.kernel.org/r/20240411115444.374475-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Carolina Jubran authored
When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 45bf454a ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Carolina Jubran authored
netif_queue_set_napi asserts whether RTNL lock is held if the netdev is initialized. Acquire the RTNL lock before activating or deactivating RQs/SQs if the lock has not been held before in the flow. Fixes: f25e7b82 ("net/mlx5e: link NAPI instances to queues and IRQs") Cc: Joe Damato <jdamato@fastly.com> Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-6-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rahul Rameshbabu authored
Channels can potentially have independent mdev instances. Do not refer to the global mdev instance in the mlx5e_priv instance for channel FW operations related to coalescing. CQ numbers that would be valid on the channel's mdev instance may not be correctly referenced if using the mlx5e_priv instance. Fixes: 67936e13 ("net/mlx5e: Let channels be SD-aware") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-5-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shay Drory authored
Code parts from cited commit were mistakenly dropped while rebasing before submission. Add them here. Fixes: c6e77aa9 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-4-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tariq Toukan authored
Check if devcom holds an error pointer and return immediately. This fixes Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c:221 sd_register() error: 'devcom' dereferencing possible ERR_PTR() Enhance mlx5_devcom_register_component() so it stops returning NULL, making it easier for its callers. Fixes: d3d05766 ("net/mlx5: SD, Implement devcom communication and primary election") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/all/f09666c8-e604-41f6-958b-4cc55c73faf9@gmail.com/T/Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-3-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shay Drory authored
The cited patch introduces the concept of buckets in LAG in hash mode. However, the patch doesn't clear the number of buckets in the LAG deactivation. This results in using the wrong number of buckets in case user create a hash mode LAG and afterwards create a non-hash mode LAG. Hence, restore buckets number to default after hash mode LAG deactivation. Fixes: 352899f3 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Asbjørn Sloth Tønnesen authored
I noticed that only 3 out of the 4 input bits were used, mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked. In order to avoid a complicated maze, I converted it to use a 16 byte mapping table. As shown in the table below the old heuristics doesn't always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1 then it used to only match follow-up fragment packets. Here are all the combinations, and their resulting new/old VCAP key/mask filter: /- FLOW_DIS_IS_FRAGMENT (key/mask) | /- FLOW_DIS_FIRST_FRAG (key/mask) | | /-- new VCAP fragment (key/mask) v v v v- old VCAP fragment (key/mask) 0/0 0/0 -/- -/- impossible (due to entry cond. on mask) 0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag) 0/0 1/0 -/- -/- impossible (key > mask) 0/0 1/1 1/3 1/3 first fragment 0/1 0/0 0/3 3/3 !! not fragmented 0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment) 0/1 1/0 -/- -/- impossible (key > mask) 0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag) 1/0 0/0 -/- -/- impossible (key > mask) 1/0 0/1 -/- -/- impossible (key > mask) 1/0 1/0 -/- -/- impossible (key > mask) 1/0 1/1 -/- -/- impossible (key > mask) 1/1 0/0 1/1 3/3 !! some fragment 1/1 0/1 3/3 3/3 follow-up fragment 1/1 1/0 -/- -/- impossible (key > mask) 1/1 1/1 1/3 1/3 first fragment In the datasheet the VCAP fragment values are documented as: 0 = no fragment 1 = initial fragment 2 = suspicious fragment 3 = valid follow-up fragment Result: 3 combinations match the old behavior, 3 combinations have been corrected, 2 combinations are now invalid, and fail, 8 combinations are impossible. It should now be aligned with how FLOW_DIS_IS_FRAGMENT and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in net/core/flow_dissector.c Since the VCAP fragment values are not a bitfield, we have to ignore the suspicious fragment value, eg. when matching on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1. Only compile tested, and logic tested in userspace, as I unfortunately don't have access to this switch chip (yet). Fixes: d6c2964d ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Tested-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== af_unix: Fix MSG_OOB bugs with MSG_PEEK. Currently, OOB data can be read without MSG_OOB accidentally in two cases, and this seris fixes the bugs. v1: https://lore.kernel.org/netdev/20240409225209.58102-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240410171016.7621-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Currently, we can read OOB data without MSG_OOB by using MSG_PEEK when OOB data is sitting on the front row, which is apparently wrong. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' If manage_oob() is called when no data has been copied, we only check if the socket enables SO_OOBINLINE or MSG_PEEK is not used. Otherwise, the skb is returned as is. However, here we should return NULL if MSG_PEEK is set and no data has been copied. Also, in such a case, we should not jump to the redo label because we will be caught in the loop and hog the CPU until normal data comes in. Then, we need to handle skb == NULL case with the if-clause below the manage_oob() block. With this patch: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) Traceback (most recent call last): File "<stdin>", line 1, in <module> BlockingIOError: [Errno 11] Resource temporarily unavailable Fixes: 314001f0 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240410171016.7621-3-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
When we call recv() for AF_UNIX socket, we first peek one skb and calls manage_oob() to check if the skb is sent with MSG_OOB. However, when we fetch the next (and the following) skb, manage_oob() is not called now, leading a wrong behaviour. Let's say a socket send()s "hello" with MSG_OOB and the peer tries to recv() 5 bytes with MSG_PEEK. Here, we should get only "hell" without 'o', but actually not: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hello', MSG_OOB) 5 >>> c2.recv(5, MSG_PEEK) b'hello' The first skb fills 4 bytes, and the next skb is peeked but not properly checked by manage_oob(). Let's move up the again label to call manage_oob() for evry skb. With this patch: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hello', MSG_OOB) 5 >>> c2.recv(5, MSG_PEEK) b'hell' Fixes: 314001f0 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240410171016.7621-2-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Apr, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Apr, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Current release - new code bugs: - netfilter: complete validation of user input - mlx5: disallow SRIOV switchdev mode when in multi-PF netdev Previous releases - regressions: - core: fix u64_stats_init() for lockdep when used repeatedly in one file - ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr - bluetooth: fix memory leak in hci_req_sync_complete() - batman-adv: avoid infinite loop trying to resize local TT - drv: geneve: fix header validation in geneve[6]_xmit_skb - drv: bnxt_en: fix possible memory leak in bnxt_rdma_aux_device_init() - drv: mlx5: offset comp irq index in name by one - drv: ena: avoid double-free clearing stale tx_info->xdpf value - drv: pds_core: fix pdsc_check_pci_health deadlock Previous releases - always broken: - xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING - bluetooth: fix setsockopt not validating user input - af_unix: clear stale u->oob_skb. - nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies - drv: virtio_net: fix guest hangup on invalid RSS update - drv: mlx5e: Fix mlx5e_priv_init() cleanup flow - dsa: mt7530: trap link-local frames regardless of ST Port State" * tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits) net: ena: Set tx_info->xdpf value to NULL net: ena: Fix incorrect descriptor free behavior net: ena: Wrong missing IO completions check order net: ena: Fix potential sign extension issue af_unix: Fix garbage collector racing against connect() net: dsa: mt7530: trap link-local frames regardless of ST Port State Revert "s390/ism: fix receive message buffer allocation" net: sparx5: fix wrong config being used when reconfiguring PCS net/mlx5: fix possible stack overflows net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev net/mlx5e: RSS, Block XOR hash with over 128 channels net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit net/mlx5e: HTB, Fix inconsistencies with QoS SQs number net/mlx5e: Fix mlx5e_priv_init() cleanup flow net/mlx5e: RSS, Block changing channels number when RXFH is configured net/mlx5: Correctly compare pkt reformat ids net/mlx5: Properly link new fs rules into the tree net/mlx5: offset comp irq index in name by one net/mlx5: Register devlink first under devlink lock net/mlx5: E-switch, store eswitch pointer before registering devlink_param ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "The most important fix is the sg one because the regression it fixes (spurious warning and use after final put) is already backported to stable. The next biggest impact is the target fix for wrong credentials used to load a module because it's affecting new kernels installed on selinux based distributions. The other three fixes are an obvious off by one and SATA protocol issues" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() scsi: hisi_sas: Handle the NCQ error returned by D2H frame scsi: target: Fix SELinux error when systemd-modules loads the target module scsi: sg: Avoid race in error handling & drop bogus warn
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: - make {virt, phys, page, pfn} translation work with KFENCE for LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE enabled) - update dts files for Loongson-2K series to make devices work correctly - fix a build error * tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE mm: Move lowmem_page_address() a little later
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs fixes from Kent Overstreet: "Notable user impacting bugs - On multi device filesystems, recovery was looping in btree_trans_too_many_iters(). This checks if a transaction has touched too many btree paths (because of iteration over many keys), and isuses a restart to drop unneeded paths. But it's now possible for some paths to exceed the previous limit without iteration in the interior btree update path, since the transaction commit will do alloc updates for every old and new btree node, and during journal replay we don't use the btree write buffer for locking reasons and thus those updates use btree paths when they wouldn't normally. - Fix a corner case in rebalance when moving extents on a durability=0 device. This wouldn't be hit when a device was formatted with durability=0 since in that case we'll only use it as a write through cache (only cached extents will live on it), but durability can now be changed on an existing device. - bch2_get_acl() could rarely forget to handle a transaction restart; this manifested as the occasional missing acl that came back after dropping caches. - Fix a major performance regression on high iops multithreaded write workloads (only since 6.9-rc1); a previous fix for a deadlock in the interior btree update path to check the journal watermark introduced a dependency on the state of btree write buffer flushing that we didn't want. - Assorted other repair paths and recovery fixes" * tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits) bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter() bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail() bcachefs: Fix a race in btree_update_nodes_written() bcachefs: btree_node_scan: Respect member.data_allowed bcachefs: Don't scan for btree nodes when we can reconstruct bcachefs: Fix check_topology() when using node scan bcachefs: fix eytzinger0_find_gt() bcachefs: fix bch2_get_acl() transaction restart handling bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take() bcachefs: Rename struct field swap to prevent macro naming collision MAINTAINERS: Add entry for bcachefs documentation Documentation: filesystems: Add bcachefs toctree bcachefs: JOURNAL_SPACE_LOW bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems bcachefs: fix rand_delete unit test bcachefs: fix ! vs ~ typo in __clear_bit_le64() bcachefs: Fix rebalance from durability=0 device bcachefs: Print shutdown journal sequence number ...
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Tzung-Bi Shih: "Fix a NULL pointer dereference" * tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_uart: properly fix race condition
-