- 18 Jan, 2021 2 commits
-
-
Maximilian Luz authored
Both, ssh_rtl_rx_start() and ssh_rtl_tx_start() functions, do not exist and have been consolidated into ssh_rtl_start(). Nevertheless, kernel-doc references the former functions. Replace those references with references to ssh_rtl_start(). Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210114150826.19109-1-luzmaximilian@gmail.comSigned-off-by:
Hans de Goede <hdegoede@redhat.com>
-
Mauro Carvalho Chehab authored
A function has a different name between their prototype and its kernel-doc markup: ../drivers/platform/surface/aggregator/ssh_request_layer.c:1065: warning: expecting prototype for ssh_rtl_tx_start(). Prototype was for ssh_rtl_start() instead Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by:
-
- 13 Jan, 2021 4 commits
-
-
Maximilian Luz authored
CI static analysis complains about the allocation size in payload and response buffers being unchecked. In general, these allocations should be safe as the user-input is u16 and thus limited to U16_MAX, which is only slightly larger than the theoretical maximum imposed by the underlying SSH protocol. All bounds on these values required by the underlying protocol are enforced in ssam_request_sync() (or rather the functions called by it), thus bounds here are only relevant for allocation. Add comments explaining that this should be safe. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: 178f6ab7 ("platform/surface: Add Surface Aggregator user-space interface") Addresses-Coverity: ("Untrusted allocation size") Signed-off-by:
-
Maximilian Luz authored
When copy_struct_from_user() in ssam_cdev_request() fails, we directly jump to the 'out' label. In this case, however 'spec' and 'rsp' are not initialized, but we still access fields of those variables. Fix this by initializing them at the time of their declaration. Reported-by:
-
Colin Ian King authored
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then passed as a 64 bit function argument. In the case where func is 32 or more this can lead to an oveflow. Avoid this by shifting using the BIT_ULL macro instead. Addresses-Coverity: ("Unintentional integer overflow") Fixes: fc00bc8a ("platform/surface: Add Surface ACPI Notify driver") Signed-off-by: -
Jiaxun Yang authored
Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Writing VPCCMD_W_TOUCHPAD may cause a spurious key press. Add has_touchpad_switch to workaround these machines. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org # 5.4+ -- v2: Specify touchpad to ELAN0634 v3: Stupid missing ! in v2 v4: Correct acpi_dev_present usage (Hans) Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.comSigned-off-by:
-
- 06 Jan, 2021 9 commits
-
-
Maximilian Luz authored
The Surface ACPI Notify (SAN) device provides an ACPI interface to the Surface Aggregator EC, specifically the Surface Serial Hub interface. This interface allows EC requests to be made from ACPI code and can convert a subset of EC events back to ACPI notifications. Specifically, this interface provides a GenericSerialBus operation region ACPI code can execute a request by writing the request command data and payload to this operation region and reading back the corresponding response via a write-then-read operation. Furthermore, this interface provides a _DSM method to be called when certain events from the EC have been received, essentially turning them into ACPI notifications. The driver provided in this commit essentially takes care of translating the request data written to the operation region, executing the request, waiting for it to finish, and finally writing and translating back the response (if the request has one). Furthermore, this driver takes care of enabling the events handled via ACPI _DSM calls. Lastly, this driver also exposes an interface providing discrete GPU (dGPU) power-on notifications on the Surface Book 2, which are also received via the operation region interface (but not handled by the SAN driver directly), making them accessible to other drivers (such as a dGPU hot-plug driver that may be added later on). On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6, Book 2, Laptop 1 and 2), the SAN interface provides full battery and thermal subsystem access, as well as other EC based functionality. On those models, battery and thermal sensor devices are implemented as standard ACPI devices of that type, however, forward ACPI calls to the corresponding Surface Aggregator EC request via the SAN interface and receive corresponding notifications (e.g. battery information change) from it. This interface is therefore required to provide said functionality on those devices. Signed-off-by:
-
Maximilian Luz authored
Add a misc-device providing user-space access to the Surface Aggregator EC, mainly intended for debugging, testing, and reverse-engineering. This interface gives user-space applications the ability to send requests to the EC and receive the corresponding responses. The device-file is managed by a pseudo platform-device and corresponding driver to avoid dependence on the dedicated bus, allowing it to be loaded in a minimal configuration. A python library and scripts to access this device can be found at [1]. [1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssamSigned-off-by:
-
Maximilian Luz authored
Add documentation for the Surface Aggregator subsystem and its client drivers, giving an overview of the subsystem, its use-cases, its internal structure and internal API, as well as its external API for writing client drivers. Signed-off-by:
-
Maximilian Luz authored
The Surface Aggregator EC provides varying functionality, depending on the Surface device. To manage this functionality, we use dedicated client devices for each subsystem or virtual device of the EC. While some of these clients are described as standard devices in ACPI and the corresponding client drivers can be implemented as platform drivers in the kernel (making use of the controller API already present), many devices, especially on newer Surface models, cannot be found there. To simplify management of these devices, we introduce a new bus and client device type for the Surface Aggregator subsystem. The new device type takes care of managing the controller reference, essentially guaranteeing its validity for as long as the client device exists, thus alleviating the need to manually establish device links for that purpose in the client driver (as has to be done with the platform devices). Signed-off-by:
-
Maximilian Luz authored
This commit adds error injection hooks to the Surface Serial Hub communication protocol implementation, to: - simulate simple serial transmission errors, - drop packets, requests, and responses, simulating communication failures and potentially trigger retransmission timeouts, as well as - inject invalid data into submitted and received packets. Together with the trace points introduced in the previous commit, these facilities are intended to aid in testing, validation, and debugging of the Surface Aggregator communication layer. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20201221183959.1186143-6-luzmaximilian@gmail.comSigned-off-by:
-
Maximilian Luz authored
Add trace points to the Surface Aggregator subsystem core. These trace points can be used to track packets, requests, and allocations. They are further intended for debugging and testing/validation, specifically in combination with the error injection capabilities introduced in the subsequent commit. Signed-off-by:
-
Maximilian Luz authored
Event items are used for completing Surface Aggregator EC events, i.e. placing event command data and payload on a workqueue for later processing to avoid doing said processing directly on the receiver thread. This means that event items are allocated for each incoming event, regardless of that event being transmitted via sequenced or unsequenced packets. On the Surface Book 3 and Surface Laptop 3, touchpad HID input events (unsequenced), can constitute a larger amount of traffic, and therefore allocation of event items. This warrants caching event items to reduce memory fragmentation. The size of the cached objects is specifically tuned to accommodate keyboard and touchpad input events and their payloads on those devices. As a result, this effectively also covers most other event types. In case of a larger event payload, event item allocation will fall back to kzalloc(). Signed-off-by:
-
Maximilian Luz authored
Surface Serial Hub communication is, in its core, packet based. Each sequenced packet requires to be acknowledged, via an ACK-type control packet. In case invalid data has been received by the driver, a NAK-type (not-acknowledge/negative acknowledge) control packet is sent, triggering retransmission. Control packets are therefore a core communication primitive and used frequently enough (with every sequenced packet transmission sent by the embedded controller, including events and request responses) that it may warrant caching their allocations to reduce possible memory fragmentation. Signed-off-by:
-
Maximilian Luz authored
Add Surface System Aggregator Module core and Surface Serial Hub driver, required for the embedded controller found on Microsoft Surface devices. The Surface System Aggregator Module (SSAM, SAM or Surface Aggregator) is an embedded controller (EC) found on 4th and later generation Microsoft Surface devices, with the exception of the Surface Go series. This EC provides various functionality, depending on the device in question. This can include battery status and thermal reporting (5th and later generations), but also HID keyboard (6th+) and touchpad input (7th+) on Surface Laptop and Surface Book 3 series devices. This patch provides the basic necessities for communication with the SAM EC on 5th and later generation devices. On these devices, the EC provides an interface that acts as serial device, called the Surface Serial Hub (SSH). 4th generation devices, on which the EC interface is provided via an HID-over-I2C device, are not supported by this patch. Specifically, this patch adds a driver for the SSH device (device HID MSHW0084 in ACPI), as well as a controller structure and associated API. This represents the functional core of the Surface Aggregator kernel subsystem, introduced with this patch, and will be expanded upon in subsequent commits. The SSH driver acts as the main attachment point for this subsystem and sets-up and manages the controller structure. The controller in turn provides a basic communication interface, allowing to send requests from host to EC and receiving the corresponding responses, as well as managing and receiving events, sent from EC to host. It is structured into multiple layers, with the top layer presenting the API used by other kernel drivers and the lower layers modeled after the serial protocol used for communication. Said other drivers are then responsible for providing the (Surface model specific) functionality accessible through the EC (e.g. battery status reporting, thermal information, ...) via said controller structure and API, and will be added in future commits. Signed-off-by:
-
- 04 Jan, 2021 9 commits
-
-
Shyam Sundar S K authored
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage if macro, correcting it now. Fixes: 156ec473 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.comSigned-off-by:
-
Mark Pearson authored
The previous commit adding functionality for the palm sensor had a mistake which meant the error conditions on initialisation was not checked correctly. On some older platforms this meant that if the sensor wasn't available an error would be returned and the driver would fail to load. This commit corrects the error condition. Many thanks to Mario Oenning for reporting and determining the issue Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20201230024726.7861-1-markpearson@lenovo.comSigned-off-by:
-
Arnold Gozum authored
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook". Add this model to the dmi_switches_allow_list. Signed-off-by:
Arnold Gozum <arngozum@gmail.com> Link: https://lore.kernel.org/r/20201226205307.249659-1-arngozum@gmail.comSigned-off-by:
-
Hans de Goede authored
The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen, with the X and Y coordinates swapped compared to the LCD panel. Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y" device-property to the i2c-client instantiated for this device before the driver binds. This is the first entry of a Goodix touchscreen to touchscreen_dmi.c, so far DMI quirks for Goodix touchscreen's have been added directly to drivers/input/touchscreen/goodix.c. Currently there are 3 DMI tables in goodix.c: 1. rotated_screen[] for devices where the touchscreen is rotated 180 degrees vs the LCD panel 2. inverted_x_screen[] for devices where the X axis is inverted 3. nine_bytes_report[] for devices which use a non standard touch report size Arguably only 3. really needs to be inside the driver and the other 2 cases are better handled through the generic touchscreen DMI quirk mechanism from touchscreen_dmi.c, which allows adding device-props to any i2c-client. Esp. now that goodix.c is using the generic touchscreen_properties code. Alternative to the approach from this patch we could add a 4th dmi_system_id table for devices with swapped-x-y axis to goodix.c, but that seems undesirable. Cc: Bastien Nocera <hadess@hadess.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Heikki Krogerus authored
There are several reports about the tps6598x causing interrupt flood on boards with the INT3515 ACPI node, which then causes instability. There appears to be several problems with the interrupt. One problem is that the I2CSerialBus resources do not always map to the Interrupt resource with the same index, but that is not the only problem. We have not been able to come up with a solution for all the issues, and because of that disabling the device for now. The PD controller on these platforms is autonomous, and the purpose for the driver is primarily to supply status to the userspace, so this will not affect any functionality. Reported-by:
Moody Salem <moody@uniswap.org> Fixes: a3dd034a ("ACPI / scan: Create platform device for INT3515 ACPI nodes") Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883511Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201223143644.33341-1-heikki.krogerus@linux.intel.comSigned-off-by:
-
Geert Uytterhoeven authored
All Microsoft Surface platform-specific device drivers depend on ACPI, but the gatekeeper symbol SURFACE_PLATFORMS does not. Hence when the user is configuring a kernel without ACPI support, he is still asked about Microsoft Surface drivers, even though this question is irrelevant. Fix this by moving the dependency on ACPI from the individual driver symbols to SURFACE_PLATFORMS. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Randy Dunlap authored
Fix build warnings when CONFIG_PM_SLEEP is not enabled and these functions are not used: ../drivers/platform/surface/surface_gpe.c:189:12: warning: ‘surface_gpe_resume’ defined but not used [-Wunused-function] static int surface_gpe_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~ ../drivers/platform/surface/surface_gpe.c:184:12: warning: ‘surface_gpe_suspend’ defined but not used [-Wunused-function] static int surface_gpe_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~ Fixes: 274335f1 ("platform/surface: Add Driver to set up lid GPEs on MS Surface device") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: platform-driver-x86@vger.kernel.org Reviewed-by:
-
Srinivas Pandruvada authored
In some case when BIOS disabled turbo, cpufreq cpuinfo_max_freq can be lower than base_frequency at higher config level. So, in that case set scaling_min_freq to base_frequency. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20201221071859.2783957-3-srinivas.pandruvada@linux.intel.comSigned-off-by:
-
Srinivas Pandruvada authored
When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be limited to config level 0 base frequency. But when user selects a higher config levels, this will result in higher base frequency. But since scaling_max_freq is still old base frequency, the performance will still be limited. So when the turbo is disabled and cpufreq base_frequency is higher than scaling_max_freq, update the scaling_max_freq to the base_frequency. Signed-off-by:
-
- 27 Dec, 2020 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Since commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d..b24c30c6, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by:
Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
-
- 26 Dec, 2020 5 commits
-
-
Linus Torvalds authored
Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by:
Joe Perches <joe@perches.com> Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
-
Nathan Chancellor authored
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Alexander Lobakin authored
Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by:
Alexander Lobakin <alobakin@pm.me> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Rob Herring authored
Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 25 Dec, 2020 3 commits
-
-
Linus Torvalds authored
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use cases in ARM machines. - Fix memory leak when synthesizing SDT probes in 'perf probe'. - Update kernel header copies related to KVM, epol_pwait. msr-index and powerpc and s390 syscall tables. * tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits) perf probe: Fix memory leak when synthesizing SDT probes perf stat aggregation: Add separate thread member perf stat aggregation: Add separate core member perf stat aggregation: Add separate die member perf stat aggregation: Add separate socket member perf stat aggregation: Add separate node member perf stat aggregation: Start using cpu_aggr_id in map perf cpumap: Drop in cpu_aggr_map struct perf cpumap: Add new map type for aggregation perf stat: Replace aggregation ID with a struct perf cpumap: Add new struct for cpu aggregation perf cpumap: Use existing allocator to avoid using malloc perf tests: Improve topology test to check all aggregation types perf tools: Update s390's syscall.tbl copy from the kernel sources perf tools: Update powerpc's syscall.tbl copy from the kernel sources perf s390: Move syscall.tbl check into check-headers.sh perf powerpc: Move syscall.tbl check to check-headers.sh tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers: Update KVM headers from the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle updates from Julia Lawall. * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: Correct usage of make coccicheck coccinelle: update expiring email addresses coccinnelle: Remove ptr_ret script kbuild: do not use scripts/ld-version.sh for checking spatch version remove boolinit.cocci
-
