- 30 May, 2018 40 commits
-
-
Randy Dunlap authored
[ Upstream commit 1e0ce03b ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
[ Upstream commit fed03fe7 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by:
Hon Weng Chong <honwchong@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 647d04f8 ] If the RCLK mux clock configuration is specified in DT and no set_sysclk() callback is used in the sound card driver the sclk_srcrate field will remain set to 0, leading to an incorrect PSR divider setting. To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock, so the actual RCLK mux selection is taken into account. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 30966861 ] If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
James Smart authored
[ Upstream commit 04673e38 ] The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 161df4f0 ] During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by:
-
James Smart authored
[ Upstream commit 2289e959 ] The driver ignored checks on whether the link should be kept administratively down after a link bounce. Correct the checks. Signed-off-by:
-
Richard Haines authored
[ Upstream commit 213d7f94 ] When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Prashant Bhole authored
[ Upstream commit ddd00103 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit e3ebaa46 ] Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit ab6e9a99 ] The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Baoquan He authored
[ Upstream commit bee3204e ] Currently the kdump kernel becomes very slow if 'noapic' is specified. Normal kernel doesn't have this bug. Kernel parameter 'noapic' is used to disable IO-APIC in system for testing or special purpose. Here the root cause is that in kdump kernel LAPIC is disabled since commit: 522e6646 ("x86/apic: Disable I/O APIC before shutdown of the local APIC") In this case we need set up through-local-APIC on boot CPU in setup_local_APIC(). In normal kernel the legacy irq mode is enabled by the BIOS. If it is virtual wire mode, the local-APIC has been enabled and set as through-local-APIC. Though we fixed the regression introduced by commit 522e6646, to further improve robustness set up the through-local-APIC mode explicitly, do not rely on the default boot IRQ mode. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ørjan Eide authored
[ Upstream commit 57de50af ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ørjan Eide <orjan.eide@arm.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Joe Perches authored
[ Upstream commit db6775ca ] Using a period after a newline causes bad output. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by:
Joe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17886/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Richard Guy Briggs authored
[ Upstream commit 23138ead ] If there is a memory allocation error when trying to change an audit kernel feature value, the ignored allocation error will trigger a NULL pointer dereference oops on subsequent use of that pointer. Return instead. Passes audit-testsuite. See: https://github.com/linux-audit/audit-kernel/issues/76Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> [PM: not necessary (other funcs check for NULL), but a good practice] Signed-off-by:
-
Peter Robinson authored
[ Upstream commit 7c73cf4c ] The MODULE_ALIAS is required to enable the sun4i-ss driver to load automatically when built at a module. Tested on a Cubietruck. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit a8321e78 ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. In this patch an erroneous P value for 74176002 output frequency is also corrected. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Acked-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit 2ac051ee ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit ab044784 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit cdb68fbd ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit 179db533 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 67300abd ] Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 116e5258 ] Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by:
Steve Kenton <skenton@ou.edu> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Thomas Vincent-Cross authored
[ Upstream commit 832e4e1f ] Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679Signed-off-by:
Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit f9f57869 ] The arc_uart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a legitimate DTB. Fixes: ea28fd56 ("serial/arc-uart: switch to devicetree based probing") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit ffab87fd ] The lpuart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: c9e2e946 ("tty: serial: add Freescale lpuart driver support") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 56734448 ] The imx_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: ff05967a ("serial/imx: add of_alias_get_id() reference back") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit dd345a31 ] The auart_port[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 1ea6607d ("serial: mxs-auart: Allow device tree probing") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 49ee23b7 ] The s3c24xx_serial_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from an incrementing probe index, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using a legitimate DTB or legitimate board code. Fixes: 13a9f6c6 ("serial: samsung: Consider DT alias when probing ports") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit e7d75e18 ] The cdns_uart_port[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 928e9263 ("tty: xuartps: Initialize ports according to aliases") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 347876ad ] The shifting of buf[5] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. If the top bit of buf[5] is set then all then all the upper bits sec end up as also being set because of the sign-extension. Fix this by casting buf[5] to an unsigned long before the shift. Detected by CoverityScan, CID#1465292 ("Unintended sign extension") Fixes: 0e149233 ("rtc: add rtc-tx4939 driver") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit e1a74185 ] Currently the allocation of priv->oldaddr is not null checked which will lead to subsequent errors when accessing priv->oldaddr. Fix this with a null pointer check and a return of -ENOMEM on allocation failure. Detected with Coccinelle: drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test, possible model on line 1723 Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
-
lionel.debieve@st.com authored
[ Upstream commit 326ed382 ] Avoid issue when probing the RNG without reset if bad status has been detected previously Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit e8588e26 ] rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Shawn Lin authored
[ Upstream commit 4bf59902 ] The MMC sample and drv clock for rockchip platforms are derived from the bus clock output to the MMC/SDIO card. So it should never happens that the clk rate is zero given it should inherits the clock rate from its parent. If something goes wrong and makes the clock rate to be zero, the calculation would be wrong but may still make the mmc tuning process work luckily. However it makes people harder to debug when the following data transfer is unstable. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Brad Love authored
[ Upstream commit c7c7e8d7 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Qi Hou authored
[ Upstream commit a3ca8312 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by:
Frank Mori Hess <fmh6jj@gmail.com> Tested-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit a398e043 ] While experimenting with older compiler versions, I ran into a warning that no longer shows up on gcc-4.8 or newer: drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format': drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds This is an off-by-one bug, leading to an access before the start of the array, while newer compilers silently assume this undefined behavior cannot happen and leave the loop at index 0 if no other entry matches. As Sylvester explains, we actually need to ensure that the value is within the range, so this reworks the loop to be easier to parse correctly, and an additional check to fall back on the first format value for any unexpected input. I found an existing gcc bug for it and added a reduced version of the function there. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3 Fixes: babde1c2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Brad Love authored
[ Upstream commit 5ceade1d ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by:
-
Brad Love authored
[ Upstream commit 779c79d4 ] Hauppauge produced a revision of ImpactVCBe using an 888, with a 25MHz crystal, instead of using the default third overtone 50Mhz crystal. This overrides that frequency so that the cx25840 is properly configured. Without the proper crystal setup the cx25840 cannot load the firmware or decode video. Signed-off-by:
-
