[why]
Some specific TCON chip has HW limitation to support PSRSU+DSC.

[how]
Force ffu mode when DSC enabled if we detect it is the specific
model from sink OUI DPCD. And disable ABM update for this case.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and DMUB fw for PSR-SU

[how]
return True if PSR-SU in the checker should_use_dmub_lock()
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
While support ALPM, do ALPM state transition while PSR entry/exit.
ALPM is needed for PSR-SU feature, and since the function is ready,
we'd enable it by default.

- Add psr level definition to enable/disable ALPM and set ALPM
  powerdone mode.
- Enable ALPM by default
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
When DC driver send PSR exit dmub command to DMUB FW, it might not
wait until PSR exit. Then it may hit the following deadlock situation.
1. DC driver send HW LOCK command to DMUB FW due to frame update
2. DMUB FW Set the HW lock
3. DMUB execute PSR exit sequence and stuck at polling DPG Pending
register due to the HW Lock is set
4. DC driver ask DMUB FW to unlock HW lock, but DMUB FW is polling
DPG pending register

[how]
The reason why DC driver doesn't wait until PSR exit is because some of
the PSR state machine state is not update the dc driver. So when DC
driver read back the PSR state, it take the state for PSR inactive.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
The current PSR SU programming margin is fixed base on FHD 60HZ
panel. If the resolution and refresh rate become higher, the time
of current margin might not cover the programming SU time.

[how]
Notice that the programming SU time is the same among different
panels.

Instead of fixing the margin with target line number, change the
margin unit to micro second which indicate the time needed for
programming SU. Then FW set the margin line number base on the
line time and margin time.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & how]
We only support line capture indication as 0 for PSRSU
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The Y-granularity panel parameter indicate the grid
pattern granularity in the Y direction for PSRSU.

[How]
Send the Y-granularity data by PSR_COPY_SETTINGS dmub command.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable pipe1 support starting from SIENNA CICHLID asic
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Starting from SIENNA CICHLID asic supports two gfx pipes, enabling
two graphics queues, 1 on each pipe, pipe0 queue0 would be the normal
piority queue and pipe1 queue0 would be the high priority queue

Only one queue per pipe is visble to SPI, SPI looks at the priority
value assigned to CP_GFX_HQD_QUEUE_PRIORITY from each of the queue's
HQD/MQD.

Create contexts applying AMDGPU_CTX_PRIORITY_HIGH which submits job
to the high priority queue on GFX pipe1. There would be starvation
of LP workload if HP workload is always available.

v2:
  - remove unnecessary check(Nirmoy)
  - make pipe1 hardware support a separate patch(Nirmoy)
  - remove duplicate code(Shashank)
  - add CSA support for second gfx pipe(Alex)

v3(Christian):
  - fix incorrect indentation
  - merge COMPUTE and GFX switch cases as both calls the same function.

v4:
  - rebase w/ latest code base
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added device coredump information:
- Kernel version
- Module
- Time
- VRAM status
- Guilty process name and PID
- GPU register dumps
v1 -> v2: Variable name change
v1 -> v2: NULL check
v1 -> v2: Code alignment
v1 -> v2: Adding dummy amdgpu_devcoredump_free
v1 -> v2: memset reset_task_info to zero
v2 -> v3: add CONFIG_DEV_COREDUMP for variables
v2 -> v3: remove NULL check on amdgpu_devcoredump_read
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate memory for register value and use the same values for devcoredump.
v1 -> v2: Change krealloc_array() to kmalloc_array()
v2 -> v3: Fix alignment
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
To support PSR2 Source DPCD configuration

[How]
Update the PSR2 Source DPCD settings while the PSR2 enabled
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
We need to implement the VSC packet rev4 that is required by PSRSU.

Follow the eDP 1.5 spec pg. 257

changes in v2:
-------------------
- set vsc packet rev2 for PSR1

Cc: Chandan Vurdigerenataraj <chandan.vurdigerenataraj@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
Based on PSRSU specification, every selective update frame need to use
two SDP to indicate the frame active range. So we occupy another GSP1
for PSRSU execution.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
In PSR-SU design, the DMUB FW handles the combination of multiple
dirty rectangles.

[how]
- create DC dmub update dirty rectangle helper which sends the
  dirty rectangles per pipe from DC to DMUB, and DMUB FW will
  handle to combine the dirty RECTs
- call the helper from DC commit plane update function.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
set psr version as PSR-SU in kernel-FW interface function to ensure
the correct dmub command parameter is fed into FW.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
PSR-SU is implemented in upstreamed dmub FW but not enabled on
DM and DC. We'd add necessary and missing definitions in dmub
cmd header to align w/ the up-to-date DMUB FW for PSR-SU support.

[how]
Add definitions and items below into dmub cmd header:
- DMUB psr version enumeration for PSR-SU
- dirty rectangle structure
- psr debug flag of forcing full frame update
- dmub command of updating dirty rectangle and cursor infor
- dmub psr command type of setting sink vtotal in PSR active
- dmub psr su debug flags structure
- dmub cmd structure for
  - updating dirty rectangle
  - cursor infor
  - setting sink vtotal
- dmub ringbuffer command items
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Define ixAZALIA_F0_CODEC_PIN_CONTROL_ACP_DATA
Define AZALIA_F0_CODEC_PIN_CONTROL_ACP_DATA__SUPPORTS_AI_MASK/SHIFT
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Protect remove_hpo_dp_link_enc_from_ctx() and release_hpo_dp_link_enc()
with CONFIG_DRM_AMD_DC_DCN as the functions are only called from code
that is protected by CONFIG_DRM_AMD_DC_DCN.  Fixes build fail with
-Werror=unused-function.

Fixes: 9b0e0d433f74 ("drm/amd/display: Add dependant changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>

Revised validation logic when marking for seamless boot. Init resources
accordingly when Pre-OS has ODM enabled. Reset ODM when transitioning
Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set
odm accordingly upon commit.
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Implements DTB ref clock switching with reg key default to OFF.
Refactors dccg DTBCLK logic to not store redundant state information
dccg. Also removes duplicated functions that should be inherited from
other dcn versions.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update base.dprefclk_khz to match result from dcn32_dump_clk_registers()
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This commit cleans up code that uses old variables and adds some SMU
interfaces for future flexibility.
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use DTBCLK for valid pixel clock generation
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Previously we used to send FCLK P-state enable messages upon each call
to update_clocks based on dml output. This resulted in increased message
transactions between DC and PMFW.

[How]
Update the code to check safe_to_lower status and send the message based
on dml input only on boot. This reduces message transactions. Also
remove other unwanted code based on current code status.
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
DCN has sidebands to control some clocks, it is useful for clk_mgr to
always update the clocks it explicitly controls rather than skip them
because it enables more configurations to work without SMU

[how]
only skip handling clocks where SMU manages the frequency for clocks
with DENTIST sideband (DISP/DPP), only skip the voltage request when SMU
not available, but otherwise proceed normally
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can now enable FEC.
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@github.amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
New dividers in DCCG need to be programmed depending
on encoder/stream type since pixels per clock in
OTG/DIO is different

DIO also needs additional programming depending on
pixels per clock
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[Description]
By default we can now set
ODM_MEM_VBLANK_PWR_MODE=1
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

LVDS support was implemented in DC a while ago.  Just DAC
support is left to do.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
HUBP_UNBOUNDED_REQ_MODE and CURSOR_REQ_MODE are normally set together.
In hubp32_prepare_subvp_buffering() call, CURSOR_REQ_MODE is set based on
whether SubVP is enabled or not.  For non MPO case, both REQ_MODE
registers are set to 1.  But since SubVP is not enabled, then
CURSOR_REQ_MODE is set to 0, overriding the previous value.

[How]
Do not set CURSOR_REQ_MODE to 0 if SubVP is not enabled.  This
will allow CURSOR_REQ_MODE to stay as 1 in the non MPO case.
Add note to follow up and check case for single pipe MPO and
SubVP enabled as this would cause both REQ_MODE registers to be
set to 0 but SubVP enabled would override CURSOR_REQ_MODE to 1.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We know that "grbm_soft_reset" is true because we're already inside an
if (grbm_soft_reset) condition.  No need to test again.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the per asic offsets so the we don't have to have
asic specific logic in the common code.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set appropriate caps for DCN3.2.x.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So we can eventaully use them in the common smu code for
accessing the SMU mailboxes without needing a lot of
per asic logic in the common code.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[How & Why]
To be enabled once PMFW supports it.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable the AGP aperture on chips with GMC v11.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check IP version rather than asic type.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY?]
If higher states have memory speed set to 0 MT/s currently they do not get set
to the highest value which can cause validation failures.

[HOW?]
Set unpopulated higher states to max value.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>