Smatch reports the following warning:

  CHECK   drivers/staging/rtl8723bs/os_dep/mlme_linux.c
drivers/staging/rtl8723bs/os_dep/mlme_linux.c:149 rtw_os_indicate_disconnect() warn: inconsistent indenting

Again, a simple change in the white space fixes this problem.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch logs the following warning:

  CHECK   drivers/staging/rtl8723bs/os_dep/os_intfs.c
drivers/staging/rtl8723bs/os_dep/os_intfs.c:1082 ips_netdrv_open() warn: inconsistent indenting

A simple change in the white space handles this warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch lists the following warning:

  CHECK   drivers/staging/rtl8723bs/os_dep/recv_linux.c
drivers/staging/rtl8723bs/os_dep/recv_linux.c:353 rtw_recv_indicatepkt() warn: variable dereferenced before check 'precv_frame' (see line 312)

This warning is fixed by removing the test at line 353.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch lists the following warning:

  CHECK   drivers/staging/rtl8723bs/os_dep/rtw_proc.c
drivers/staging/rtl8723bs/os_dep/rtw_proc.c:102 rtw_drv_proc_open() warn: inconsistent indenting

This warning is fixed with a simple change in the white space.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch issues the warning

  CHECK   drivers/staging/rtl8723bs/os_dep/xmit_linux.c
drivers/staging/rtl8723bs/os_dep/xmit_linux.c:42 _rtw_pktfile_read() warn: inconsistent indenting

A simple indent changes fixes this.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sw_encrypt always is 0. Replace sw_encrypt with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Value of this variable does not changed after initialization.
Replace software_encrypt with its default value.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_software_encrypt used only once and does not changed.
Replace it with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sw_decrypt always is 0, so replace it with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Value of this variable has no changes, and used once.
Replace software_decrypt with its value.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_software_decrypt used only once and does not changed.
Replace it with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vchi_cfg.h: fix checkpatch ERROR: Macros with complex values should be enclosed in parenthesis
Signed-off-by: Haim Daniel <haimdaniel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: s626.c - fixed the following checkpatch issue:
CHECK: Prefer kernel type 's16' over 'int16_t'
#1939: FILE: drivers/staging/comedi/drivers/s626.c:1939:
+               int16_t dacdata = (int16_t)data[i];
Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: ms.c Fixed checkpatch warning:
WARNING: Prefer using "%s", __func__ to embedded function names
#2597: FILE: rts5208/ms.c:2597:
+       dev_dbg(rtsx_dev(chip), "ms_build_l2p_tbl: %d\n", seg_no);
Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commands written to the QMan software portals have a valid
bit in the "verb" field of the command that, when set with
the right value, notifies the hardware that the command is
fully written and ready to be processed.

The "verb" field should be the last one to be written in the
swp command registers, after all other fields are filled in.
The current implementation doesn't follow this rule for all
commands, which may result in an incompletely configured
command being processed by the hardware. Enforce the correct
order of writes to avoid this situation.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: Avoid multiple line dereference.

Checkpatch warning is fixed by:
* Trivial indentation improvement and
* Using += instead of + helps shortening the statement.
Signed-off-by: Prasant Jalan <prasant.jalan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the warnings from checkpatch.pl on file rtl8712/mlme_linux.c
Avoided multiple line dereferences in the code
Signed-off-by: Tejaswini Poluri <tejaswinipoluri3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse spits out a warning that a __be16 was being assigned to a u16.
Change the type of txbuf16 to __be16 b/c it's a restricted type and
prevents mixing endianness.
Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed checkpatch warning:
WARNING: Missing a blank line after declarations
#882: FILE: drivers/staging/xgifb/XGI_main_26.c:882:
+                               const u8 *f =
XGI_TV_filter[filter_tb].filter[filter];
+                               pr_debug("FilterTable[%d]-%d: %*ph\n",
Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch gives WARNING: Avoid line continuations in quoted strings.

Trivial fix by removing line continuations and adding another quote at
the start of next line.
Signed-off-by: Prasant Jalan <prasant.jalan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lynxfb_suspend() & lynxfb_resume() return on errors while holding
console_lock.

Adding 'goto' such that proper cleanups can be done before returning
from function and therefore console_lock can be released before
returning.
Signed-off-by: Prasant Jalan <prasant.jalan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: ddk750_display.c - fixed the following checkpatch warning:
WARNING: line over 80 characters
#149: FILE: drivers/staging/sm750fb/ddk750_display.c:149:
+               swPanelPowerSequence((output & PNL_SEQ_MASK) >> PNL_SEQ_OFFSET, 4);
Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary log messages in the driver which are just tracking
function entry and exits.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trivial fix to spelling mistake in various comments and pr_debug messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct  hfa384x_pdrec len and code fields as clearly little endian,
mark both fields as such. pda->buf is also clearly little endian.

Fixes sparse warnings:

  drivers/staging/wlan-ng/prism2fw.c:613:16: warning: cast to restricted __le16
  drivers/staging/wlan-ng/prism2fw.c:616:21: warning: cast to restricted __le16
  drivers/staging/wlan-ng/prism2fw.c:625:21: warning: cast to restricted __le16
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the `CLK_CLKFIG(chan, src)` macro to a static function
`pci224_clk_config(chan, src)`.  This is consistent with an earlier
change to convert `GAT_CONFIG(chan, src)` to a static function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let the compiler figure out whether `pci224_gat_confip()` should be
inlined by itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the `CLK_CONFIG(chan, src)` macro to a static function
`pci230_clk_config(chan, src)`.  This is consistent with an earlier
change to convert `GAT_CONFIG(chan, src)` to a static function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let the compiler figure out whether `pci230_gat_config()` should be
inlined by itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The strncasecmp of buff against the literal string RSSI
is using variable length which is zero. This should be instead
using the variable size instead.  Also remove the redundant
variable length.

Detected by PVS-Studio, warning: V575
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The vif->idx value is always 0 for two interfaces.

wl->vif_num = 0;

loop {
     ...

     vif->idx = wl->vif_num;
     ...
     wl->vif_num = i;
      ....
     i++;
     ...
}

At present, vif->idx is assigned the value of wl->vif_num
at the beginning of this block and device is initialized
based on this index value.
In the next iteration, wl->vif_num is still 0 as it is only updated
later but gets assigned to vif->idx in the beginning. This causes problems
later when we try to reference a particular interface and also while
configuring the firmware.

This patch moves the assignment to vif->idx from the beginning
of the block to after wl->vif_num is updated with latest value of i.

Fixes: commit 735bb39c ("staging: wilc1000: simplify vif[i]->ndev accesses")
Cc: <stable@vger.kernel.org>
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The configuration packet format has changed in the newer wilc
firmware versions 14.2 and up. This update ensures that the
firmware is initialized correctly by the host and configured
in the required mode.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was reported in checkpatch.pl:
ERROR: space required after that close brace '}'

Changes in v2:
add space after close brace '}' also at line 35, before it
was only for 34.
Signed-off-by: Valerio Genovese  <valerio.click@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coding style problem detected by checkpatch.pl
ERROR: space prohibited before that ','
Signed-off-by: Alfonso Lima Astor <alfonsolimaastor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is not used and also had a style error. I have run
grep and compiled the module to be sure.
Signed-off-by: Alfonso Lima Astor <alfonsolimaastor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed Free Software Foundation's address from the copyright notice
and replaced it with a link to http://www.gnu.org/licensesSigned-off-by: Riku Salminen <riku@laatikko.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When COMEDI_NI_LABPC is built-in and COMEDI_NI_LABPC_ISA is a loadable
module, thhe ISA DMA code is not reachable by the common module, causing
a link error:

drivers/staging/built-in.o: In function `labpc_interrupt':
ni_labpc_common.c:(.text+0x1d178): undefined reference to `labpc_handle_dma_status'
ni_labpc_common.c:(.text+0x1d1cb): undefined reference to `labpc_drain_dma'
drivers/staging/built-in.o: In function `labpc_ai_cmd':
ni_labpc_common.c:(.text+0x1d8ad): undefined reference to `labpc_setup_dma'

This changes the definition of COMEDI_NI_LABPC_ISADMA so that it will
also be builtin for that case. This looks like a rather old bug, but
I have never seen this in randconfig testing until today.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The rtl8723bs is found on quite a few systems used by Linux users,
such as on Atom systems (Intel Computestick and various other
Atom based devices) and on many (budget) ARM boards such as
the CHIP.

The plan moving forward with this is for the new clean,
written from scratch, rtl8xxxu driver to eventually gain
support for sdio devices. But there is no clear timeline
for that, so lets add this driver included in staging for now.

Cc: Bastien Nocera <hadess@hadess.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Wrap arguments of call to vnt_control_out() to avoid exceeding 80
character limit, but maintain alignment.
Signed-off-by: Daniel Cashman <dan.a.cashman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change embedded function name in vnt_rf_set_txpower with %s format with
__func__ argument to make it consistent with other part of if-else and
kernel coding style standards as reported by checkpatch.
Signed-off-by: Daniel Cashman <dan.a.cashman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>