- 23 Aug, 2022 9 commits
-
-
Iskren Chernev authored
Add support for PM6125 PMIC which is found on SM4250/6115 SoCs. S1, S2, S3, S4, S8 are FTS+FTSMPS_510, rev 2 - range is 0.3-1.372V by 4mV increments S5, S6, s7 are BUCK+HFSMPS_510, rev 4 - range is 0.32-2.04V by 8mV increment L1, L3, L7 are LDO+N600_510, rev 2 L2, L4, L8, L17, L18 are LDO+N300_510, rev 2 L6 is LDO+N1200_510, rev 2 - range is 0.32-1.304V by 8mV increment L5 is LDO+MV_P50_510, rev 2 L15, L19, L20 are LDO+MV_P150_510, rev 2 L21, L22, L23, L24 are LDO+MV_P600_510, rev 2 - range is 1.504-3.544V by 8mV increment L9, L11, L14 are LDO+LV_P600_510, rev 2 L10, L16 are LDO+LV_P150_510, rev 2 L12, L13 are LDO+LV_P300_510, rev 2 - range 1.504-2V by 8mV increment Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220802221112.2280686-10-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
The sorting is split in multiple commits for easier reviewing. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20220802221112.2280686-9-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
The sorting is split in multiple commits for easier reviewing. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20220802221112.2280686-8-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
Add support for LDO_510 and FTSMPS3 regulators, all belonging to register layout HFSMPS. This is done in preparation for adding support for the PM6125 PMIC. For FTSMPS3 and LDO_510, only IDLE and NORMAL modes are selectable (no FAST). The inspiration for the magic constants was taken from [1] [1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20220802221112.2280686-7-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
This is preparation for supporing PM6125. The HFSMPS is a BUCK type regulator with subtype 0x0a, same as the existing HFS430 regulator. Even though the HFSMPS and HFS430 share a type and subtype, the HFSMPS has an updated register map, including different mode values, moved pull down register, and different slew rate address and formula. In addition to NORMAL (NPM), FAST (AUTO_LPM) and IDLE (LPM), the regulator also supports RETENTION and AUTO_RM which are currently unselectable by the driver. The inspiration of this is taken from [1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20220802221112.2280686-6-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
Document the pm6125 compatible string and available regulators in the QCom SMD RPM regulator documentation. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220802221112.2280686-5-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
As requested by Krzysztof Kozlowski. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220802221112.2280686-4-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
Add support for pm6125 compatible string and add relevant supplies in QCom SPMI regulator documentation. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220802221112.2280686-3-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Iskren Chernev authored
Add a newline between if-then blocks for different compatible PMICs. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220802221112.2280686-2-iskren.chernev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Aug, 2022 3 commits
-
-
Christian Kohlschütter authored
Previously, an unresolved regulator supply reference upon calling regulator_register on an always-on or boot-on regulator caused set_machine_constraints to be called twice. This in turn may initialize the regulator twice, leading to voltage glitches that are timing-dependent. A simple, unrelated configuration change may be enough to hide this problem, only to be surfaced by chance. One such example is the SD-Card voltage regulator in a NanoPI R4S that would not initialize reliably unless the registration flow was just complex enough to allow the regulator to properly reset between calls. Fix this by re-arranging regulator_register, trying resolve the regulator's supply early enough that set_machine_constraints does not need to be called twice. Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com> Link: https://lore.kernel.org/r/20220818124646.6005-1-christian@kohlschutter.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series from Matti Vaittinen <mazziesaccount@gmail.com>: A few* drivers seem to use pattern demonstrated by pseudocode: - devm_regulator_get() - regulator_enable() - devm_add_action_or_reset(regulator_disable()) Introducing devm helpers for this pattern would remove bunch of code from drivers. Typically following: - replace 3 calls (devm_regulator_get[_optional](), regulator_enable(), devm_add_action_or_reset()) with just one (devm_regulator_get_enable[_optional]()). - drop disable callback. - remove stored pointer to struct regulator - which can lead to problem when an devm action for regulator_disable is used. I believe this simplifies things by removing some dublicated code. The suggested managed 'get_enable' APIs do not return the pointer to regulators for user because any call to regulator_disable() (or regulator_enable()) may easily lead to regulator enable count imbalance upon device detach. (Eg, if someone calls regulator_disable() and the device is then detached before user has re-enabled the regulator). Not returning the pointer to obtained regulator to caller is a good hint that the enable/disable should not be manually handled when these APIs are used. OTOH, not returning the pointer reduces the use-cases by not allowing the consumers to perform other regulator actions. For example request the voltages. A few drivers which used the "get, enable, devm_action_to_disable" did also query the voltages. The API does not suit needs of such users.
-
Matti Vaittinen authored
A few regulator consumer drivers seem to be just getting a regulator, enabling it and registering a devm-action to disable the regulator at the driver detach and then forget about it. We can simplify this a bit by adding a devm-helper for this pattern. Add devm_regulator_get_enable() and devm_regulator_get_enable_optional() Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Aug, 2022 2 commits
-
-
Matti Vaittinen authored
A few managed regulator functions were missing from the API list. Add missing functions. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/5efc0c90342b0a0ef3322b8fc1472b84cfc0eb45.1660292316.git.mazziesaccount@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Douglas Anderson authored
Since we don't actually pass the load to the firmware, switch to using get_optimum_mode() instead of open-coding it. This is intended to have no effect other than cleanup. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220726102024.1.Icc838fe7bf0ef54a014ab2fee8af311654f5342a@changeidSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 14 Aug, 2022 11 commits
-
-
Mark Brown authored
-
Linus Torvalds authored
-
Yury Norov authored
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs lseek fix from Al Viro: "Fix proc_reg_llseek() breakage. Always had been possible if somebody left NULL ->proc_lseek, became a practical issue now" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: take care to handle NULL ->proc_lseek()
-
Al Viro authored
Easily done now, just by clearing FMODE_LSEEK in ->f_mode during proc_reg_open() for such entries. Fixes: 868941b1 "fs: remove no_llseek" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: - 'perf c2c' now supports ARM64, adjust its output to cope with differences with what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well! - Refactor the JSON processing, making the output more compact and thus reducing the size of the resulting perf binary - Improvements for 'perf offcpu' profiling, including tracking child processes - Update Intel JSON metrics and events files for broadwellde, broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding, sapphirerapids, skylakex and snowridgex - Add 'perf stat' JSON output and a 'perf test' entry for it - Ignore memfd and anonymous mmap events if jitdump present - Refactor 'perf test' shell tests allowing subdirs - Fix an error handling path in 'parse_perf_probe_command()' - Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window - Print debuginfod queries if -v option is used, to explain delays in processing when debuginfo servers are enabled to fetch DSOs with richer symbol tables - Improve error message for 'perf record -p not_existing_pid' - Fix openssl and libbpf feature detection - Add PMU pai_crypto event description for IBM z16 on 'perf list' - Fix typos and duplicated words on comments in various places * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits) perf test: Refactor shell tests allowing subdirs perf vendor events: Update events for snowridgex perf vendor events: Update events and metrics for skylakex perf vendor events: Update metrics for sapphirerapids perf vendor events: Update events for knightslanding perf vendor events: Update metrics for jaketown perf vendor events: Update metrics for ivytown perf vendor events: Update events and metrics for icelakex perf vendor events: Update events and metrics for haswellx perf vendor events: Update events and metrics for cascadelakex perf vendor events: Update events and metrics for broadwellx perf vendor events: Update metrics for broadwellde perf jevents: Fold strings optimization perf jevents: Compress the pmu_events_table perf metrics: Copy entire pmu_event in find metric perf pmu-events: Hide the pmu_events perf pmu-events: Don't assume pmu_event is an array perf pmu-events: Move test events/metrics to JSON perf test: Use full metric resolution perf pmu-events: Hide pmu_events_map ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit CPUs trap on it rather than ignoring it as they should. - Fix ftrace when building with clang, which was broken by some refactoring. - A couple of other minor fixes. Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool. * tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix build failure from uninitialised variable powerpc/ppc-opcode: Fix PPC_RAW_TW() powerpc64/ftrace: Fix ftrace for clang builds powerpc: Make eh value more explicit when using lwarx powerpc: Don't hide eh field of lwarx behind a macro powerpc: Fix eh field when calling lwarx on PPC32
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull /proc/mounts fix from Al Viro: "Fix for /proc/mounts escaping - escape the '#' character too" * tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: escape hash as well
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - two fixes for stable, one for a lock length miscalculation, and another fixes a lease break timeout bug - improvement to handle leases, allows the close timeout to be configured more safely - five restructuring/cleanup patches * tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Do not access tcon->cfids->cfid directly from is_path_accessible cifs: Add constructor/destructors for tcon->cfid SMB3: fix lease break timeout when multiple deferred close handles for the same file. smb3: allow deferred close timeout to be configurable cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir cifs: Move cached-dir functions into a separate file cifs: Remove {cifs,nfs}_fscache_release_page() cifs: fix lock length calculation
-
David Howells authored
Enable multipage folio support for the afs filesystem. Support has already been implemented in netfslib, fscache and cachefiles and in most of afs, but I've waited for Matthew Wilcox's latest folio changes. Note that it does require a change to afs_write_begin() to return the correct subpage. This is a "temporary" change as we're working on getting rid of the need for ->write_begin() and ->write_end() completely, at least as far as network filesystems are concerned - but it doesn't prevent afs from making use of the capability. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Aug, 2022 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Misc timer fixes: - fix a potential use-after-free bug in posix timers - correct a prototype - address a build warning" * tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Cleanup CPU timers before freeing them during exec time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64 posix-timers: Make do_clock_gettime() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not turned on by default), which also need STIBP enabled (if available) to be '100% safe' on even the shortest speculation windows" * tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Enable STIBP for IBPB mitigated RETBleed
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - two driver fixes for issues introduced this cycle - one trivial driver improvement regarding ACPI - more DTS conversion and additions - documentation updates - subsystem-wide move from strlcpy to strscpy * tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: i2c-sysfs: fix hyperlinks docs: i2c: i2c-sysfs: improve wording docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks docs: i2c: smbus-protocol: improve DataLow/DataHigh definition docs: i2c: i2c-protocol: remove unused legend items docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words docs: i2c: i2c-protocol: update introductory paragraph i2c: move core from strlcpy to strscpy i2c: move drivers from strlcpy to strscpy i2c: kempld: Support ACPI I2C device declaration i2c: mediatek: add i2c compatible for MT8188 dt-bindings: i2c: update bindings for mt8188 soc i2c: microchip-corei2c: fix erroneous late ack send dt-bindings: i2c: qcom,i2c-cci: convert to dtschema i2c: qcom-geni: Fix GPI DMA buffer sync-back
-
https://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull more xfs updates from Darrick Wong: "There's not a lot this time around, just the usual bug fixes and corrections for missing error returns. - Return error codes from block device flushes to userspace - Fix a deadlock between reclaim and mount time quotacheck - Fix an unnecessary ENOSPC return when doing COW on a filesystem with severe free space fragmentation - Fix a miscalculation in the transaction reservation computations for file removal operations" * tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix inode reservation space for removing transaction xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork xfs: fix intermittent hang during quotacheck xfs: check return codes when flushing block devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu) - __alloc_disk_node() error handling fix (Rafael) * tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block: block: Do not call blk_put_queue() if gendisk allocation fails nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Regression fix for this merge window, fixing a wrong order of arguments for io_req_set_res() for passthru (Dylan) - Fix for the audit code leaking context memory (Peilin) - Ensure that provided buffers are memcg accounted (Pavel) - Correctly handle short zero-copy sends (Pavel) - Sparse warning fixes for the recvmsg multishot command (Dylan) - Error handling fix for passthru (Anuj) - Remove randomization of struct kiocb fields, to avoid it growing in size if re-arranged in such a fashion that it grows more holes or padding (Keith, Linus) - Small series improving type safety of the sqe fields (Stefan) * tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block: io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields io_uring: make io_kiocb_to_cmd() typesafe fs: don't randomize struct kiocb fields io_uring: consistently make use of io_notif_to_data() io_uring: fix error handling for io_uring_cmd io_uring: fix io_recvmsg_prep_multishot sparse warnings io_uring/net: send retry for zerocopy io_uring: mem-account pbuf buckets audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker() io_uring: pass correct parameters to io_req_set_res
-
Carsten Haitzler authored
This is a prelude to adding more tests to shell tests and in order to support putting those tests into subdirectories, I need to change the test code that scans/finds and runs them. To support subdirs I have to recurse so it's time to refactor the code to allow this and centralize the shell script finding into one location and only one single scan that builds a list of all the found tests in memory instead of it being duplicated in 3 places. This code also optimizes things like knowing the max width of desciption strings (as we can do that while we scan instead of a whole new pass of opening files). It also more cleanly filters scripts to see only *.sh files thus skipping random other files in directories like *~ backup files, other random junk/data files that may appear and the scripts must be executable to make the cut (this ensures the script lib dir is not seen as scripts to run). This avoids perf test running previous older versions of test scripts that are editor backup files as well as skipping perf.data files that may appear and so on. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
Update the events to v1.20, update events for snowridgex by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the snowridgex files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-12-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
Update the events to v1.28, the metrics are based on TMA 4.4 full, update events and metrics for skylakex by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the skylakex files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-11-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for sapphirerapids. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the sapphirerapids files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-10-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
Update the events to v9, update events for knightslanding by the latest event converter tools. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the knightslanding files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-9-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for jaketown. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the jaketown files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-8-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zhengjun Xing authored
The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for ivytown. Use script at: https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py to download and generate the latest events and metrics. Manually copy the ivytown files into perf. Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220812085239.3089231-7-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-