- 25 Nov, 2019 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Reverts a patch to avoid spinning forever when context's timeline is active but has no requests Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191122155523.GA20167@jlahtine-desk.ger.corp.intel.com
-
- 22 Nov, 2019 1 commit
-
-
Chris Wilson authored
From inside an active timeline in the execbuf ioctl, we may try to reclaim some space in the GGTT. We need GGTT space for all objects on !full-ppgtt platforms, and for context images everywhere. However, to free up space in the GGTT we may need to remove some pinned objects (e.g. context images) that require flushing the idle barriers to remove. For this we use the big hammer of intel_gt_wait_for_idle() However, commit 7936a22d ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") will continue spinning on the wait if a timeline is active but lacks requests, as is the case during execbuf reservation. Spinning forever is quite time consuming, so revert that commit and start again. In practice, the effect commit 7936a22d was trying to achieve is accomplished by commit 1683d24c ("drm/i915/gt: Move new timelines to the end of active_list"), so there is no immediate rush to replace the looping. Testcase: igt/gem_exec_reloc/basic-range Fixes: a46bfdc8 ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") References: 1683d24c ("drm/i915/gt: Move new timelines to the end of active_list") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk (cherry picked from commit 689122dc) [Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes] Signed-off-by:
-
- 21 Nov, 2019 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-11-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Fix ttm bo refcnt when using the new gem obj mmap hook (Thomas) Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 20 Nov, 2019 4 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Includes gvt-next-fixes-2019-11-12 - Fix Bugzilla #112051: Fix detection for a CMP-V PCH - Fix Bugzilla #112256: Corrupted page table at address on plymouth splash - Fix Bugzilla #111594: Avoid losing RC6 when HuC authentication is used - Fix for OA/perf metric coherency, restore GT coarse power gating workaround - Avoid atomic context on error capture - Avoid MST bitmask overflowing to EDP/DPI input select - Fixes to CI found dmesg splats Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-15: amdgpu: - Fix AVFS handling on SMU7 parts with custom power tables - Enable Overdrive sysfs interface for Navi parts - Fix power limit handling on smu11 parts - Fix pcie link sysfs output for Navi - Probably cancel MM worker threads on shutdown radeon: - Cleanup for ppc change Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
Merge tag 'gvt-next-fixes-2019-11-12' of https://github.com/intel/gvt-linux into drm-intel-next-fixes gvt-next-fixes-2019-11-12 - Remove PVINFO read for initial state (Tina) Signed-off-by:
-
Chris Wilson authored
As we want to be able to run inside atomic context for retiring the i915_active, and we are no longer allowed to abuse mutex_trylock, split the tree management portion of i915_active.mutex into an irq-safe spinlock. References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626 Fixes: 274cbf20 ("drm/i915: Push the i915_active.retire into a worker") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk (cherry picked from commit c9ad602f) Signed-off-by:
-
- 18 Nov, 2019 10 commits
-
-
Jani Nikula authored
It's supposed to be just a const pointer. Fixes: 074c77e3 ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com (cherry picked from commit 48ea97fa) Signed-off-by:
-
Don Hiatt authored
On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by:KiteStramuort <kitestramuort@autistici.org> Reported-by:
S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Tomas Janousek <tomi@nomi.cz> Signed-off-by:
Don Hiatt <don.hiatt@intel.com> Reviewed-by:
-
Chris Wilson authored
Our callers fall into two categories, those passing timeout=0 who just want to flush request retirements and those passing a timeout that need to wait for submission completion (e.g. intel_gt_wait_for_idle()). Currently, we only wait for a snapshot of timelines at the start of the wait (but there was an expectation that new requests would cause timelines to appear at the end). However, our callers, such as intel_gt_wait_for_idle() before suspend, do require us to wait for the power management requests emitted by retirement as well. If we don't, then it takes an extra second or two for the background worker to flush the queue and mark the GT as idle. Fixes: 7e805762 ("drm/i915: Drop struct_mutex from around i915_retire_requests()") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk (cherry picked from commit 7936a22d) Signed-off-by:
-
Imre Deak authored
The workaround to disable coarse power gating is still needed on SKL GT3/GT4 machines and since the RC6 context corruption was discovered by the hardware team also on all GEN9 machines. Restore applying the workaround. Fixes: c1132367 ("drm/i915: Extract GT render sleep (rc6) management") Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
fbdev uses the physical address of our framebuffer for its fb_mmap() routine. While we need to adapt this address for the new io BAR, we have to fix v5.4 first! The simplest fix is to restore the smem back to v5.3 and we will then probably have to implement our fbops->fb_mmap() callback to handle local memory. Reported-by:
Neil MacLeod <freedesktop@nmacleod.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by:
-
Lionel Landwerlin authored
I'm observing incoherence metric values, changing from run to run. It appears the patches introducing noa wait & reconfiguration from command stream switched places in the series multiple times during the review. This lead to the dependency of one onto the order to go missing... Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1 ("drm/i915/perf: execute OA configuration from command stream") Reviewed-by:
-
Bruce Chang authored
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture (if there is no aperture preallocated for the use of error capture), but the error capture and compression routines are now run in normal context: <3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653 <3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test <4> [113.319900] no locks held by debugfs_test/678. <3> [113.321002] Preemption disabled at: <4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915] <4> [113.327259] Call Trace: <4> [113.327871] dump_stack+0x67/0x9b <4> [113.328683] ___might_sleep+0x167/0x250 <4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110 <4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915] <4> [113.335951] compress_page+0x7c/0x100 [i915] <4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915] <4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915] However, it is not a good idea to run the slow compression inside atomic context, so we choose not to. Fixes: 895d8ebe ("drm/i915: error capture with no ggtt slot") Signed-off-by:
Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by:
Brian Welty <brian.welty@intel.com> Reviewed-by:
-
José Roberto de Souza authored
TRANS_DDI_MST_TRANSPORT_SELECT is 2 bits wide not 3, it was taking one bit from EDP/DSI Input Select. Fixes: b3545e08 ("drm/i915/tgl: add support to one DP-MST stream") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-1-jose.souza@intel.com (cherry picked from commit bb747fa5) Signed-off-by:
-
Imre Deak authored
According to internal documents I found for CMP PCHs the PCI ID 0xA3C1 belongs to a CMP-V chipset. Based on the same docs the programming of the PCH is compatible with that of KBP. Fix up my previous wrong assumption accordingly using the SPT programming which in turn is the basis for KBP. The original bug reporter verified that this is the correct PCH identification (the only way we'll program valid DDC pin-pair values to the GMBUS register) and the Windows team uses the same identification (that is using the KBP programming model for this PCH). I filed the necessary Bspec update requests (BSpec/33734). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051 Fixes: 37c92dc3 ("drm/i915: Add new CNL PCH ID seen on a CML platform") Reported-and-tested-by:
Cyrus <cyrus.lien@canonical.com> Cc: Cyrus <cyrus.lien@canonical.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Chris Wilson authored
Throw in a flush_work() to specifically flush the context cleanup work before the module is unloaded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112248 Fixes: a4e7ccda ("drm/i915: Move context management under GEM") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112150051.1603-1-chris@chris-wilson.co.uk (cherry picked from commit 5f00cac9) Signed-off-by:
-
- 15 Nov, 2019 3 commits
-
-
Gerd Hoffmann authored
When mapping ttm objects via drm_gem_ttm_mmap() helper drm_gem_mmap_obj() will take an object reference. That gets never released due to ttm having its own reference counting. Fix that by dropping the gem object reference once the ttm mmap completed (and ttm refcount got bumped). For that to work properly the drm_gem_object_get() call in drm_gem_ttm_mmap() must be moved so it happens before calling obj->funcs->mmap(), otherwise the gem refcount would go down to zero. Fixes: 231927d9 ("drm/ttm: add drm_gem_ttm_mmap()") Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20191113135612.19679-1-kraxel@redhat.com
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Two minor cleanups / fixes for -next. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - PMU "Frequency" is reported as accumulated cycles - Avoid OOPS in dumb_create IOCTL when no CRTCs - Mitigation for userptr put_pages deadlock with trylock_page - Fix to avoid freeing heartbeat request too early - Fix LRC coherency issue - Fix Bugzilla #112212: Avoid screen corruption on MST - Error path fix to unlock context on failed context VM SETPARAM - Always consider holding preemption a privileged op in perf/OA - Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV - Protect context while grabbing its name for the request - Don't resize aliasing ppGTT size - Smaller fixes picked by tooling Signed-off-by:
-
- 14 Nov, 2019 4 commits
-
-
YueHaibing authored
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22: warning: variable srf set but not used [-Wunused-but-set-variable] 'srf' is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
Drivers like vmwgfx may want to test whether the dma page pool is present or not. Since it's activated by default by TTM if compiled-in, define a hidden configuration option that the driver can test for. Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Dave Airlie authored
This backmerges the branch that ended up in Linus' tree. It removes all the changes for the rc6 patches from Linus' tree in favour of a patch that is based on a large refactor that occured. Otherwise it all looks good. Signed-off-by: -
Imre Deak authored
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. v6: - s/i915_rc6_/intel_rc6_/ - Don't return a value from i915_rc6_ctx_wa_check(). v7: - Rebased on latest gt rc6 refactoring. Signed-off-by:
-
- 13 Nov, 2019 9 commits
-
-
Dave Airlie authored
This is a pretty simple improvement that allows to find encoder as the one and only (ARC PGU doesn't support more than one) endpoint instead of using non-standard "encoder-slave" property. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Fix memory leak in gpu debugfs node's release (Johan) Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-08: amdgpu: - Enable VCN dynamic powergating on RV/RV2 - Fixes for Navi14 - Misc Navi fixes - Fix MSI-X tear down - Misc Arturus fixes - Fix xgmi powerstate handling - Documenation fixes scheduler: - Fix static code checker warning - Fix possible thread reactivation while thread is stopped - Avoid cleanup if thread is parked radeon: - SI dpm fix ported from amdgpu Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the "gpu" debugfs file and the drm device struct_mutex is contended, release() could return early and fail to free related resources. Note that the return value from release() is ignored. Fixes: 4f776f45 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
-
Alex Deucher authored
flush/cancel delayed works before doing finalization to avoid concurrently requests. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
sysfs interface to read pcie speed&width info on navi1x. v2: fix warning (trivial) Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Dave Airlie authored
We have the i915 security fixes to backmerge, but first let's clear the decks for other drivers to avoid a bigger mess. Signed-off-by: -
Gwan-gyeong Mun authored
The setting of MSA is done by the DDI .pre_enable() hook. And when we are using MST, the MSA is only set to first mst stream by calling of DDI .pre_eanble() hook. It raies issues to non-first mst streams. Wrong MSA or missed MSA packets might show scrambled screen or wrong screen. This splits a setting of MSA to MST and SST cases. And In the MST case it will call a setting of MSA after an allocating of Virtual Channel from MST encoder pre_enable callback. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212 Fixes: 0c06fa15 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA") Fixes: d4a415dc ("drm/i915: Fix MST oops due to MSA changes") Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.comReviewed-by:
-
Chris Wilson authored
The gem_ctx_persistence/smoketest was detecting an odd coherency issue inside the LRC context image; that the address of the ring buffer did not match our associated struct intel_ring. As we set the address into the context image when we pin the ring buffer into place before the context is active, that leaves the question of where did it get overwritten. Either the HW context save occurred after our pin which would imply that our idle barriers are broken, or we overwrote the context image ourselves. It is only in reset_active() where we dabble inside the context image outside of a serialised path from schedule-out; but we could equally perform the operation inside schedule-in which is then fully serialised with the context pin -- and remains serialised by the engine pulse with kill_context(). (The only downside, aside from doing more work inside the engine->active.lock, was the plan to merge all the reset paths into doing their context scrubbing on schedule-out needs more thought.) Fixes: d12acee8 ("drm/i915/execlists: Cancel banned contexts on schedule-out") Testcase: igt/gem_ctx_persistence/smoketest Signed-off-by:
-
- 12 Nov, 2019 4 commits
-
-
Chris Wilson authored
set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7d ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693b ("ext4: warn when page is dirtied without buffers") Signed-off-by:
-
Chris Wilson authored
We report "frequencies" (actual-frequency, requested-frequency) as the number of accumulated cycles so that the average frequency over that period may be determined by the user. This means the units we report to the user are Mcycles (or just M), not MHz. Signed-off-by:
-
Chris Wilson authored
Inside print_request(), we query the context/timeline name. Nothing immediately protects the context from being freed if the request is complete -- we rely on serialisation by the caller to keep the name valid until they finish using it. Inside intel_engine_dump(), we generally only print the requests in the execution queue protected by the engine->active.lock, but we also show the pending execlists ports which are not protected and so require a rcu_read_lock to keep the pointer valid. [ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968 [ 1695.701068] [ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331 [ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 1695.701334] Call Trace: [ 1695.701424] dump_stack+0x5b/0x90 [ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.701964] print_address_description.constprop.7+0x36/0x50 [ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.702947] __kasan_report.cold.10+0x1a/0x3a [ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915] [ 1695.704241] print_request+0x82/0x2e0 [i915] [ 1695.704638] ? fwtable_read32+0x133/0x360 [i915] [ 1695.705042] ? write_timestamp+0x110/0x110 [i915] [ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0 [ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110 [ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50 [ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915] [ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915] Fixes: c36eebd9 ("drm/i915/gt: execlists->active is serialised by the tasklet") Signed-off-by:
-
Lionel Landwerlin authored
The ordering of the checks in the existing code can lead to holding preemption not being considered as privileged op. Signed-off-by:
-
- 11 Nov, 2019 3 commits
-
-
Matt Coffin authored
[Why] On Navi10, and presumably arcterus, updating pp_table via sysfs would not re-scale the maximum possible power limit one can set. On navi10, the SMU code ignored the power percentage overdrive setting entirely, and would not allow you to exceed the default power limit at all. [How] Adding a function to the SMU interface to get the pptable version of the default power limit allows ASIC-specific code to provide the correct maximum-settable power limit for the current pptable. v3: fix spelling (Alex) Reviewed-by:
Matt Coffin <mcoffin13@gmail.com> Signed-off-by:
-
Matt Coffin authored
[Why] Before this patch, navi10 overdrive settings could not be printed via pp_od_clk_voltage [How] Implement printing for the overdrive settings for the following clocks in navi10's ppt print_clk_levels implementation: * SMU_OD_SCLK * SMU_OD_MCLK * SMU_OD_VDDC_CURVE Reviewed-by:
-
Matt Coffin authored
[Why] Before this patch, there was no way to set the gfxclk voltage curve in the overdrive settings for navi10 through pp_od_clk_voltage [How] Add the required implementation to navi10's ppt dpm table editing implementation, similar to the vega20 implementation and interface. Reviewed-by:
-
