Merge tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

Remove the ancient omap specific atags that are no longer needed.

At some point we were planning to pass the bootloader information
with custom atags that did not work out too well.

There's no need for these any longer as the kernel has been booting
fine without them for quite some time. And Now we have device tree
support that can be used instead.

* tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: remove plat/board.h file
  ARM: OMAP: move debug_card_init() function
  ARM: OMAP1: move lcd pdata out of arch/arm/*
  ARM: OMAP1: move omap1_bl pdata out of arch/arm/*
  ARM: OMAP: remove the omap custom tags
  ARM: OMAP1: remove the crystal type tag parsing
  ARM: OMAP: remove the sti console workaround
  ARM: OMAP: omap3evm: cleanup revision bits
  ARM: OMAP: cleanup struct omap_board_config_kernel
  + sync to 3.6-rc5

Merge tag 'omap-devel-gpmc-fixed-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

Changes for GPMC (General Purpose Memory Controller) that take it
closer for being just a regular device driver.

* tag 'omap-devel-gpmc-fixed-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mtd: nand: omap2: use gpmc provided irqs
  ARM: OMAP2+: gpmc-nand: Modify Interrupt handling
  ARM: OMAP2+: gpmc: Modify interrupt handling
  mtd: onenand: omap2: obtain memory from resource
  mtd: nand: omap2: obtain memory from resource
  ARM: OMAP2+: gpmc-onenand: provide memory as resource
  ARM: OMAP2+: gpmc-nand: update resource with memory
  mtd: nand: omap2: handle nand on gpmc
  ARM: OMAP2+: gpmc-nand: update gpmc-nand regs
  ARM: OMAP2+: gpmc: update nand register helper

Merge tag 'tegra-for-3.7-board-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:

ARM: tegra: remove board files

This branch removes all remaining board files for Tegra; booting is
now through device tree only.

Related, the Harmony DT is augmented with regulators, since this allows
removal of board-harmony-power.c; no other boards had regulator support.
This change depends on an enhancement to the TPS6586x regulator driver,
hence the dependency mentioned below.

* tag 'tegra-for-3.7-board-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: dt: tegra: harmony: configure power off
  ARM: dt: tegra: harmony: add regulators
  ARM: tegra: remove board (but not DT) support for Harmony
  ARM: tegra: remove board (but not DT) support for Paz00
  ARM: tegra: remove board (but not DT) support for TrimSlice

Pull in a dependent branch from Mark Brown's regulator tree for the tegra/cleanup branch.

* depends/tps6589x-dt:
  regulator: tps6586x: add support for SYS rail

Merge tag 'tegra-for-3.7-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:

This branch contains a few early cleanups; consistent use of IO_ADDRESS,
always selecting USE_OF since we're converting to device-tree-only this
merge window, and removing includes of some header files as part of
working towards single zImage.

* tag 'tegra-for-3.7-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  mmc: tegra: remove useless include of <mach/*.h>
  gpio: tegra: remove useless includes of <mach/*.h>
  ARM: tegra: remove duplicate select USE_OF
  ARM: tegra: use IO_ADDRESS for getting virtual address

Merge tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From David Brown:

Various cleanups for the msm targets.  Most of this is removing dead
code, along with a fix of a sparse warning, a list fix from a semantic
patch, and marking some functions as static.

* tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: msm: Remove uncompiled board-msm7x27
  ARM: msm: Remove unused acpuclock-arm11
  ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
  ARM: msm: Fix sparse warnings due to incorrect type
  ARM: msm: Remove unused idle.c
  ARM: msm: clock-pcom: Mark functions static
  ARM: msm: Remove msm_hw_reset_hook

ARM i.MX cleanup patches

* tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX53 clk: Fix ldb parent clocks
  serial/imx: fix IMX UART macro usage to reflect correct processor
  ARM: i.MX remove last leftovers from legacy clock support
  ARM: i.MX clk pllv1: move mxc_decode_pll code to its user
  ARM: imx27-phytec-phycore: Fix I2C EEPROM address
  ARM i.MX mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.
  ARM i.MX: remove duplicated include from clk-imx21.c
  ARM: plat-mxc: Remove unused imx_ioremap

Add DT property to tell the TPS6586x that it should provide the
pm_power_off() implementation. This allows "shutdown" to work.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.

Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.

swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
  board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
  run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
  this GPIO for now. This will be fixed when the PCIe driver is re-
  written as a driver. The code can't regulator_get("vdd_1v05") right
  now, because the vdd_1v05 regulator's probe gets deferred due to its
  supply being the PMIC, which gets probed after the regulator the first
  time around, and this dependency is only resolved by repeated probing,
  which happens when deferred_probe_initcall() is called, which happens
  in a late initcall, whose runtime order relative to harmony_pcie_init()
  is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Harmony can be booted using device tree with equal functionality as when
booted using a board file. Remove as much of the board file as is
possible, since it's no longer needed.

Two special-cases are still left in board-dt-tegra20.c, since the Tegra
PCIe driver doesn't support device tree yet, and the Harmony .dts file
doesn't yet describe regulators which are needed for PCIe. This logic is
now enabled unconditionally rather than via CONFIG_MACH_HARMONY. While
this is more code than other boards, it's still unlikely to be much of a
problem, and both regulators and PCIe should be supported via device tree
in the near future, allowing the remaining code to be removed.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Paz00 (Toshiba AC100) can be booted using device tree with equal
functionality as when booted using a board file. Remove as much of the
board file as is possible, since it's no longer needed.

One special-case is still left in board-dt-tegra20.c, since there is no
way to create a WiFi rfkill device from device tree yet. This logic is
now enabled unconditionally rather than via CONFIG_MACH_PAZ00. The extra
cases where it's enabled (.configs which did not enable Paz00 support)
shouldn't impact much since the amount of code is tiny.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Marc Dietrich <marvin24@gmx.de>

TrimSlice can be booted using device tree with equal functionality as
when booted using a board file. Remove the board file since it's no
longer needed.

One special-case is still left in board-dt-tegra20.c, since the Tegra
PCIe driver doesn't support device tree yet. This logic is now enabled
by CONFIG_TEGRA_PCI rather than via CONFIG_MACH_TRIMSLICE. The extra
cases where it's enabled (.configs which did not enable TrimSlice
support) shouldn't impact much since the amount of code is tiny.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

This board file has never been compiled. Let's just remove it
along with the one Kconfig reference to it in io.c.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

This is dead code that isn't initialized or setup (although it is
compiled). Remove it and the data structures it references.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Brown <davidb@codeaurora.org>

arch/arm/mach-msm/timer.c:153:3: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:153:3:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:153:3:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:153:38: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:153:38:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:153:38:    got struct clock_event_device *evt
arch/arm/mach-msm/timer.c:191:22: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:191:22:    expected struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt
arch/arm/mach-msm/timer.c:191:22:    got struct clock_event_device *[noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:4: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:196:4:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:196:4:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:196:39: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:196:39:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:39:    got struct clock_event_device *ce
arch/arm/mach-msm/timer.c:198:24: warning: incorrect type in argument 4 (different address spaces)
arch/arm/mach-msm/timer.c:198:24:    expected void [noderef] <asn:3>*percpu_dev_id
arch/arm/mach-msm/timer.c:198:24:    got struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

Forcing arm_pm_idle to be msm_idle() doesn't make sense in
configurations that don't have CONFIG_MSM7X00A_IDLE=y (i.e. any
targets that aren't 7x00a). Furthermore, that config doesn't even
exist, so this entire file is dead code. Just remove it so we can
use the default idle support on MSM.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

These functions are only used within clock-pcom.c, therefore mark
them as static.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

This reset hook is never assigned and is dead code. Remove it so
we have one less header file in the mach directory.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

* 'clk' of git://github.com/hzhuang1/linux:
  ARM: mmp: remove unused definition in APBC and APMU
  ARM: mmp: move mmp2 clock definition to separated file
  arm: mmp: move pxa910 clock definition to separated file
  arm: mmp: move pxa168 clock definition to separated file
  arm: mmp: make private clock definition exclude from common clock
  + Linux 3.6-rc4

The ipu_di0 and ipu_di1 muxes referenced to nonexisting clocks. Use
ldb_di0_gate and ldb_di1_gate instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Platform dependant UART data refers to MX31 macro for MX35 machines.
For all other machines, macro usage matches machine type.

Though this compiles out to the same result, it looks much like
a typo, so fix it to use the right macros instead.
Signed-off-by: Oskar Schirmer <oskar@scara.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This also removes mach/clock.h along the way
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mike Turquette <mturquette@linaro.org>

The only code using mxc_decode_pll is clk-pllv1.c, so move the code
there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mike Turquette <mturquette@linaro.org>

* ks8695/timer:
  watchdog: ks8695: sink registers into driver

Commit 70adc3f3
"ARM: ks8695: merge the timer header into the timer driver"
accidentally broke the ks8695 watchdog since it was using
the timer registers in watchdog mode.

Perform the same operation here: push the registers down
into the driver, so it is self-contained, and we can keep
depopulating the <mach/*> namespace.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Olof Johansson <olof@lixom.net>

plat/board.h file is now empty - remove it.

Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

debug_card_init() function resides in the plat/board.h file.
Move it to a separate header file under plat/ so the board.h file can be
removed.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap1 lcd platform data resides inside plat/board.h while it
should be inside include/linux/...
Move the omap1 lcd platform data to include/linux/omapfb.h.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap1 backlight platform data resides inside plat/board.h while it
should be inside include/linux/...
Move the omap1 backlight platform data to
include/linux/platform_data/.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The omap custom initialization tags are not used anymore (if ever)
by the mainline kernel.
Thus remove the omap custom initialization tags.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The omap1 crystal setting uses the OMAP custom tags.
Those tags are not used in upstream kernel and therefore the crystal
type is never set by the tag parsing code on upstream kernels.
Remove the crystal tag parsing code.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The sti console workaround uses the OMAP custom tags.
Those tags are not used in upstream kernel and therefore the workaround
never fires on upstream kernels.
Remove the sti console workaround tags part.
This leaves the workaround functional part intact so can be reused if
needed.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The omap3evm has its revision information bits inside the plat/board.h
file. Those bits are not used anywhere in the upstream tree besides the
board-omap3evm.c file.
Move the OMAP3EVM_BOARD_GEN_* bits to the board file and remove the
get_omap3_evm_rev() function declaration.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

struct omap_board_config_kernel defined in the board files
is always empty and does not bring any added value.
Remove the struct omap_board_config_kernel instances from the board
files.
Also remove the omap_get_nr_config() macro and the omap_get_var_config()
function as both are not used for quite a long time (if ever).
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull DMA-mapping fixes from Marek Szyprowski:
 "Another set of fixes for ARM dma-mapping subsystem.

  Commit e9da6e99 replaced custom consistent buffer remapping code
  with generic vmalloc areas.  It however introduced some regressions
  caused by limited support for allocations in atomic context.  This
  series contains fixes for those regressions.

  For some subplatforms the default, pre-allocated pool for atomic
  allocations turned out to be too small, so a function for setting its
  size has been added.

  Another set of patches adds support for atomic allocations to
  IOMMU-aware DMA-mapping implementation.

  The last part of this pull request contains two fixes for Contiguous
  Memory Allocator, which relax too strict requirements."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC
  ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()
  ARM: dma-mapping: Refactor out to introduce __in_atomic_pool
  ARM: dma-mapping: atomic_pool with struct page **pages
  ARM: Kirkwood: increase atomic coherent pool size
  ARM: DMA-Mapping: print warning when atomic coherent allocation fails
  ARM: DMA-Mapping: add function for setting coherent pool size from platform code
  ARM: relax conditions required for enabling Contiguous Memory Allocator
  mm: cma: fix alignment requirements for contiguous regions

Pull input subsystem updates from Dmitry Torokhov.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for EMR on Cintiq 24HD touch
  Input: i8042 - add Gigabyte T1005 series netbooks to noloop table
  Input: imx_keypad - reset the hardware before enabling
  Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>