- 09 Jan, 2018 5 commits
-
-
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Remove the unnecessary line break between the netdev name and reg state to the actual message that should be printed. For example, this: [86730.307236] ------------[ cut here ]------------ [86730.313496] netdevice: enp27s0f0 Message from the driver [...] Will be replaced with: [86770.259289] ------------[ cut here ]------------ [86770.265191] netdevice: enp27s0f0: Message from the driver [...] Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
netdev_WARN_ONCE is broken (whoops..), this fix will remove the unnecessary "condition" parameter, add the missing comma and change "arg" to "args". Fixes: 375ef2b1 ("net: Introduce netdev_*_once functions") Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree: 1) Free hooks via call_rcu to speed up netns release path, from Florian Westphal. 2) Reduce memory footprint of hook arrays, skip allocation if family is not present - useful in case decnet support is not compiled built-in. Patches from Florian Westphal. 3) Remove defensive check for malformed IPv4 - including ihl field - and IPv6 headers in x_tables and nf_tables. 4) Add generic flow table offload infrastructure for nf_tables, this includes the netlink control plane and support for IPv4, IPv6 and mixed IPv4/IPv6 dataplanes. This comes with NAT support too. This patchset adds the IPS_OFFLOAD conntrack status bit to indicate that this flow has been offloaded. 5) Add secpath matching support for nf_tables, from Florian. 6) Save some code bytes in the fast path for the nf_tables netdev, bridge and inet families. 7) Allow one single NAT hook per point and do not allow to register NAT hooks in nf_tables before the conntrack hook, patches from Florian. 8) Seven patches to remove the struct nf_af_info abstraction, instead we perform direct calls for IPv4 which is faster. IPv6 indirections are still needed to avoid dependencies with the 'ipv6' module, but these now reside in struct nf_ipv6_ops. 9) Seven patches to handle NFPROTO_INET from the Netfilter core, hence we can remove specific code in nf_tables to handle this pseudofamily. 10) No need for synchronize_net() call for nf_queue after conversion to hook arrays. Also from Florian. 11) Call cond_resched_rcu() when dumping large sets in ipset to avoid softlockup. Again from Florian. 12) Pass lockdep_nfnl_is_held() to rcu_dereference_protected(), patch from Florian Westphal. 13) Fix matching of counters in ipset, from Jozsef Kadlecsik. 14) Missing nfnl lock protection in the ip_set_net_exit path, also from Jozsef. 15) Move connlimit code that we can reuse from nf_tables into nf_conncount, from Florian Westhal. And asorted cleanups: 16) Get rid of nft_dereference(), it only has one single caller. 17) Add nft_set_is_anonymous() helper function. 18) Remove NF_ARP_FORWARD leftover chain definition in nf_tables_arp. 19) Remove unnecessary comments in nf_conntrack_h323_asn1.c From Varsha Rao. 20) Remove useless parameters in frag_safe_skb_hp(), from Gao Feng. 21) Constify layer 4 conntrack protocol definitions, function parameters to register/unregister these protocol trackers, and timeouts. Patches from Florian Westphal. 22) Remove nlattr_size indirection, from Florian Westphal. 23) Add fall-through comments as -Wimplicit-fallthrough needs this, from Gustavo A. R. Silva. 24) Use swap() macro to exchange values in ipset, patch from Gustavo A. R. Silva. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Jan, 2018 35 commits
-
-
Yafang Shao authored
As of now, there're two sk_family are traced with sock:inet_sock_set_state, which are AF_INET and AF_INET6. So the sk_family are exposed as well. Then we can conveniently use it to do the filter. Both sk_family and sk_protocol are showed in the printk message, so we need not expose them as tracepoint arguments. Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Suggested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Song Liu <songliubraving@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
The "offset" option has been removed by commit 900631ee ("l2tp: remove configurable payload offset"). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
The mask argument for phy_modify() in several locations was inverted. Fixes: fea23fb5 ("net: phy: convert read-modify-write to phy_modify()") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhu Yanjun authored
Since both first_rx and rx_ring are the head of rx ring, it not necessary to use two structure members to statically indicate the head of rx ring. So first_rx is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
The two conditions triggering BUG_ON() are somewhat unrelated: the tcp_skb_pcount() check is meant to catch TSO flaws, the second one checks sanity of congestion window bookkeeping. Split them into two separate BUG_ON() assertions on two lines, so that we know which one actually triggers, when they do. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Allow a process bound to a VRF to connect to a linklocal address. Currently, this fails because of a mismatch between the scope of the linklocal address and the sk_bound_dev_if inherited by the VRF binding: $ ssh -6 fe80::70b8:cff:fedd:ead8%eth1 ssh: connect to host fe80::70b8:cff:fedd:ead8%eth1 port 22: Invalid argument Relax the scope check to allow the socket to be bound to the same L3 device as the scope id. This makes ipv6 linklocal consistent with other relaxed checks enabled by commits 1ff23bee ("net: l3mdev: Allow send on enslaved interface") and 7bb387c5 ("net: Allow IP_MULTICAST_IF to set index to L3 slave"). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Since the commit 888cc8c2 ("sh_eth: remove EDMAC_BIG_ENDIAN") (geez, I didn't realize that was 2 years ago!) the initializers in the SuperH platform code for the 'sh_eth_plat_data::edmac_endian' stopped to matter, so we can remove that field for good (not sure if it was ever useful -- SH7786 Ether has been reported to have the same EDMAC descriptor/register endiannes as configured for the SuperH CPU)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Peng Li says: ==================== add some new features and fix some bugs for HNS3 driver This patchset adds some new features support and fixes some bugs: [Patch 1/20] adds support to enable/disable vlan filter with ethtool [Patch 2/20] disables VFs change rxvlan offload status [Patch 3/20 - 13/120 fix bugs and refine some codes for packet statistics, support query with both ifconfig and ethtool. [Patch 14/20 - 20/20] fix some other bugs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The statistics of rx/tx packets size greater than 1518 are not detailed. This patch adds more statistics for different packet size range. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
There is a redundant semicolon, this patch removes it. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
Pause parameters include source address, transmit gap and pause time. The default value of the pause source address is zero in the hardware. Default pause parameters need to be set to the hardware. Also, when setting new mac address, the pause source address need to be updated. Fixes: 9dc2145d ("net: hns3: Add support for PFC setting in TM module") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
When initializing the MAC, the MTU vlaue need to be set to the hardware too. Otherwise, the MTU value of software will be different from the MTU value of hardware. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
when changing MTU, The new MTU must need to be set to netdevice. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
When setting MTU, actually what we do is configuring the max frame size for the hardware. ETH_HLEN、ETH_FCS_LEN and VLAN_HLEN must need to be considered. And the frame size which is less than the default value should not be set to the hardware. Because in the hardware, the the max frame size not only controls the RX packet size, but also controls the TX packet size. the RX packets whose size are greater than the setting value will be dropped. This patch fixes the bug setting a error max frame size to hardware. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
commit a9c782822166 ("net: hns3: add support for set_pauseparam") adds set_pauseparam support for ethtool cmd, but forgets to update fc_mode_last_time when PFC mode is disabled in hclge_cfg_pauseparam(). The wrong fc_mode_last_time will be used to update flow control mode when lldpad has been running. As a result, when using the ethtool command "-a", user will get a wrong pause parameter. This patch adds the fc_mode_last_time update when PFC mode is disabled. Fixes: a9c782822166 ("net: hns3: add support for set_pauseparam") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The result of tqp statistics query was read with an error position, fix it according to the user manual. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Add packet statistics of netdev for ethtool -S, in order to show the statistics data for current net device. Remove update_stats() calling because it has been completed in hns3_get_netdev_stats(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The member "stats_size" of struct hns3_stats is useless, remove it and fix the macro definition which has uses this struct. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The member "stats_offset" was designed to indicate the offset of each member of struct ring_stats in struct hns3_enet_ring, but forgot to add the offset of the member in struct ring_stats. Fixes: 496d03e9 ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
An error loop index was used while querying statistics data of tqps, which may cause call trace. Fixes: 496d03e9 ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The dropped tx/rx packets number of each tqp should also be counted into the total drop tx/rx packets numbers. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Update the HNS3_NIC_STATE_DOWN bit when NIC state changes. When NIC is down, mask the packet statistics for querying with ifconfig command. It's a common practice. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
It takes more than 200 query response messages between driver and IMP, while updating the packet statistics. It's too heavy for IMP to update it per second. Extend the update period of packet statistics data from 1 second to 300 seconds(if too long, the statistics may overflow). As a result, we need to update it while querying with ifconfig tool to keep the statistics data fresh. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The igu_rx_err_pkt indicates the same error with mac_rx_fcs_err_pkt_num, so remove it. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Fix spelling error "overrsize" --> "oversize". Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Some members of packet statistics are named in different styles. This patch unifies them with new internal name rules, the main modification are below: trans --> tx rcv --> rx rcb_q%d_tx --> txq#%d rcb_q%d_rx --> rxq#%d sw_err_cnt(tx side) --> tx_dropped sw_err_cnt(rx side) --> rx_dropped pkts --> packets tx_err_cnt --> errors rx_err_cnt --> errors Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Rxvlan offload status can only be changed by PF. Initialize the value of NETIF_F_HW_VLAN_CTAG_RX bit of hw_features for VFS to false, make sure user can't be able to change it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
This patch adds vlan filter enable switch to support ethtool -K ethX rx-vlan-filter on/off. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Enable csum offloads This series introduces the MAPv4 packet format for checksum offload plus some other minor changes. Patches 1-3 are cleanups. Patch 4 renames the ingress format to data format so that all data formats can be configured using this going forward. Patch 5 uses the pacing helper to improve TCP transmit performance. Patch 6-9 defines the the MAPv4 for checksum offload for RX and TX. A new header and trailer format are used as part of MAPv4. For RX checksum offload, only the 1's complement of the IP payload portion is computed by hardware. The meta data from RX header is used to verify the checksum field in the packet. Note that the IP packet and its field itself is not modified by hardware. This gives metadata to help with the RX checksum. For TX, the required metadata is filled up so hardware can compute the checksum. Patch 10 enables GSO on rmnet devices v1->v2: Fix sparse errors reported by kbuild test robot v2->v3: Update the commit message for Patch 5 based on Eric's comments ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
Real devices may support scatter gather(SG), so enable SG on rmnet devices to use GSO. GSO reduces CPU cycles by 20% for a rate of 146Mpbs for a single stream TCP connection. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
TX checksum offload applies to TCP / UDP packets which are not fragmented using the MAPv4 checksum trailer. The following needs to be done to have checksum computed in hardware - 1. Set the checksum start offset and inset offset. 2. Set the csum_enabled bit 3. Compute and set 1's complement of partial checksum field in transport header. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
When using the MAPv4 packet format in conjunction with MAP commands, a dummy DL checksum trailer will be appended to the packet. Before this packet is sent out as an ACK, the DL checksum trailer needs to be removed. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
When using the MAPv4 packet format, receive checksum offload can be enabled in hardware. The checksum computation over pseudo header is not offloaded but the rest of the checksum computation over the payload is offloaded. This applies only for TCP / UDP packets which are not fragmented. rmnet validates the TCP/UDP checksum for the packet using the checksum from the checksum trailer added to the packet by hardware. The validation performed is as following - 1. Perform 1's complement over the checksum value from the trailer 2. Compute 1's complement checksum over IPv4 / IPv6 header and subtracts it from the value from step 1 3. Computes 1's complement checksum over IPv4 / IPv6 pseudo header and adds it to the value from step 2 4. Subtracts the checksum value from the TCP / UDP header from the value from step 3. 5. Compares the value from step 4 to the checksum value from the TCP / UDP header. 6. If the comparison in step 5 succeeds, CHECKSUM_UNNECESSARY is set and the packet is passed on to network stack. If there is a failure, then the packet is passed on as such without modifying the ip_summed field. The checksum field is also checked for UDP checksum 0 as per RFC 768 and for unexpected TCP checksum of 0. If checksum offload is disabled when using MAPv4 packet format in receive path, the packet is queued as is to network stack without the validations above. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
The MAPv4 packet format adds support for RX / TX checksum offload. For a bi-directional UDP stream at a rate of 570 / 146 Mbps, roughly 10% CPU cycles are saved. For receive path, there is a checksum trailer appended to the end of the MAP packet. The valid field indicates if hardware has computed the checksum. csum_start_offset indicates the offset from the start of the IP header from which hardware has computed checksum. csum_length is the number of bytes over which the checksum was computed and the resulting value is csum_value. In the transmit path, a header is appended between the end of the MAP header and the start of the IP packet. csum_start_offset is the offset in bytes from which hardware will compute the checksum if the csum_enabled bit is set. udp_ip4_ind indicates if the checksum value of 0 is valid or not. csum_insert_offset is the offset from the csum_start_offset where hardware will insert the computed checksum. The use of this additional packet format for checksum offload is explained in subsequent patches. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
The real device over which the rmnet devices are installed also aggregate multiple IP packets and sends them as a single large aggregate frame to the hardware. This causes degraded throughput for TCP TX due to bufferbloat. To overcome this problem, pacing shift value of 8 is set using the sk_pacing_shift_update() helper. This value was determined based on experiments with a single stream TCP TX using iperf for a duration of 30s. Pacing shift | Observed data rate (Mbps) 10 | 9 9 | 140 8 | 146 (Max link rate) Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-