- 17 Jun, 2022 3 commits
-
-
Jay Vosburgh authored
Since commit 21a75f09 ("bonding: Fix ARP monitor validation"), the bonding ARP / ND link monitors depend on the trans_start time to determine link availability. NETIF_F_LLTX drivers must update trans_start directly, which veth does not do. This prevents use of the ARP or ND link monitors with veth interfaces in a bond. Resolve this by having veth_xmit update the trans_start time. Reported-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 21a75f09 ("bonding: Fix ARP monitor validation") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
dev_isalive() is called under RTNL or dev_base_lock protection. This means that changes to dev->reg_state should be done with both locks held. syzbot reported: BUG: KCSAN: data-race in register_netdevice / type_show write to 0xffff888144ecf518 of 1 bytes by task 20886 on cpu 0: register_netdevice+0xb9f/0xdf0 net/core/dev.c:10050 lapbeth_new_device drivers/net/wan/lapbether.c:414 [inline] lapbeth_device_event+0x4a0/0x6c0 drivers/net/wan/lapbether.c:456 notifier_call_chain kernel/notifier.c:87 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:455 __dev_notify_flags+0x1d6/0x3a0 dev_change_flags+0xa2/0xc0 net/core/dev.c:8607 do_setlink+0x778/0x2230 net/core/rtnetlink.c:2780 __rtnl_newlink net/core/rtnetlink.c:3546 [inline] rtnl_newlink+0x114c/0x16a0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x811/0x8c0 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x13e/0x240 net/netlink/af_netlink.c:2501 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6107 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x58a/0x660 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x661/0x750 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x21e/0x2c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 read to 0xffff888144ecf518 of 1 bytes by task 20423 on cpu 1: dev_isalive net/core/net-sysfs.c:38 [inline] netdev_show net/core/net-sysfs.c:50 [inline] type_show+0x24/0x90 net/core/net-sysfs.c:112 dev_attr_show+0x35/0x90 drivers/base/core.c:2095 sysfs_kf_seq_show+0x175/0x240 fs/sysfs/file.c:59 kernfs_seq_show+0x75/0x80 fs/kernfs/file.c:162 seq_read_iter+0x2c3/0x8e0 fs/seq_file.c:230 kernfs_fop_read_iter+0xd1/0x2f0 fs/kernfs/file.c:235 call_read_iter include/linux/fs.h:2052 [inline] new_sync_read fs/read_write.c:401 [inline] vfs_read+0x5a5/0x6a0 fs/read_write.c:482 ksys_read+0xe8/0x1a0 fs/read_write.c:620 __do_sys_read fs/read_write.c:630 [inline] __se_sys_read fs/read_write.c:628 [inline] __x64_sys_read+0x3e/0x50 fs/read_write.c:628 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 20423 Comm: udevd Tainted: G W 5.19.0-rc2-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Jun, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Mostly driver fixes. Current release - regressions: - Revert "net: Add a second bind table hashed by port and address", needs more work - amd-xgbe: use platform_irq_count(), static setup of IRQ resources had been removed from DT core - dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation Current release - new code bugs: - hns3: modify the ring param print info Previous releases - always broken: - axienet: make the 64b addressable DMA depends on 64b architectures - iavf: fix issue with MAC address of VF shown as zero - ice: fix PTP TX timestamp offset calculation - usb: ax88179_178a needs FLAG_SEND_ZLP Misc: - document some net.sctp.* sysctls" * tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) net: axienet: add missing error return code in axienet_probe() Revert "net: Add a second bind table hashed by port and address" net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg net: usb: ax88179_178a needs FLAG_SEND_ZLP MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS ARM: dts: at91: ksz9477_evb: fix port/phy validation net: bgmac: Fix an erroneous kfree() in bgmac_remove() ice: Fix memory corruption in VF driver ice: Fix queue config fail handling ice: Sync VLAN filtering features for DVM ice: Fix PTP TX timestamp offset calculation mlxsw: spectrum_cnt: Reorder counter pools docs: networking: phy: Fix a typo amd-xgbe: Use platform_irq_count() octeontx2-vf: Add support for adaptive interrupt coalescing xilinx: Fix build on x86. net: axienet: Use iowrite64 to write all 64b descriptor pointers net: axienet: make the 64b addresable DMA depends on 64b archectures net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization net: hns3: fix PF rss size initialization bug ...
-
Yang Yingliang authored
It should return error code in error path in axienet_probe(). Fixes: 00be43a7 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Joanne Koong authored
This reverts: commit d5a42de8 ("net: Add a second bind table hashed by port and address") commit 538aaf9b ("selftests: Add test for timing a bind request to a port with a populated bhash entry") Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/ There are a few things that need to be fixed here: * Updating bhash2 in cases where the socket's rcv saddr changes * Adding bhash2 hashbucket locks Links to syzbot reports: https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/ https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/ Fixes: d5a42de8 ("net: Add a second bind table hashed by port and address") Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 15 Jun, 2022 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fixes from Kees Cook: - Correctly handle vm_map areas in hardened usercopy (Matthew Wilcox) - Adjust CFI RCU usage to avoid boot splats with cpuidle (Sami Tolvanen) * tag 'hardening-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: Make usercopy resilient against ridiculously large copies usercopy: Cast pointer to an integer once usercopy: Handle vm_map_ram() areas cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle
-
Linus Torvalds authored
Merge tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Two fixes for this merge window" * tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: fix and refactor CONFIG_SYSTEM_BLACKLIST_HASH_LIST build certs/blacklist_hashes.c: fix const confusion in certs blacklist
-
Masahiro Yamada authored
Commit addf4663 ("certs: Check that builtin blacklist hashes are valid") was applied 8 months after the submission. In the meantime, the base code had been removed by commit b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"). Fix the Makefile. Create a local copy of $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST). It is included from certs/blacklist_hashes.c and also works as a timestamp. Send error messages from check-blacklist-hashes.awk to stderr instead of stdout. Fixes: addf4663 ("certs: Check that builtin blacklist hashes are valid") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-
Masahiro Yamada authored
This file fails to compile as follows: CC certs/blacklist_hashes.o certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes] 4 | const char __initdata *const blacklist_hashes[] = { | ^~~~~ In file included from certs/blacklist_hashes.c:2: certs/blacklist.h:5:38: note: previous declaration here 5 | extern const char __initconst *const blacklist_hashes[]; | ^~~~~~~~~~~~~~~~ Apply the same fix as commit 2be04df5 ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist"). Fixes: 734114f8 ("KEYS: Add a system blacklist keyring") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull vfs idmapping fix from Christian Brauner: "This fixes an issue where we fail to change the group of a file when the caller owns the file and is a member of the group to change to. This is only relevant on idmapped mounts. There's a detailed description in the commit message and regression tests have been added to xfstests" * tag 'fs.fixes.v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: account for group membership
-
Duoming Zhou authored
The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock and block until it receives a packet from the remote. If the client doesn`t connect to server and calls read() directly, it will not receive any packets forever. As a result, the deadlock will happen. The fail log caused by deadlock is shown below: [ 369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds. [ 369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.613058] Call Trace: [ 369.613315] <TASK> [ 369.614072] __schedule+0x2f9/0xb20 [ 369.615029] schedule+0x49/0xb0 [ 369.615734] __lock_sock+0x92/0x100 [ 369.616763] ? destroy_sched_domains_rcu+0x20/0x20 [ 369.617941] lock_sock_nested+0x6e/0x70 [ 369.618809] ax25_bind+0xaa/0x210 [ 369.619736] __sys_bind+0xca/0xf0 [ 369.620039] ? do_futex+0xae/0x1b0 [ 369.620387] ? __x64_sys_futex+0x7c/0x1c0 [ 369.620601] ? fpregs_assert_state_consistent+0x19/0x40 [ 369.620613] __x64_sys_bind+0x11/0x20 [ 369.621791] do_syscall_64+0x3b/0x90 [ 369.622423] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 369.623319] RIP: 0033:0x7f43c8aa8af7 [ 369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [ 369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7 [ 369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005 [ 369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700 [ 369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe [ 369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700 This patch replaces skb_recv_datagram() with an open-coded variant of it releasing the socket lock before the __skb_wait_for_more_packets() call and re-acquiring it after such call in order that other functions that need socket lock could be executed. what's more, the socket lock will be released only when recvmsg() will block and that should produce nicer overall behavior. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Suggested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reported-by: Thomas Habets <thomas@@habets.se> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Alonso authored
The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-14 This series contains updates to ice driver only. Michal fixes incorrect Tx timestamp offset calculation for E822 devices. Roman enforces required VLAN filtering settings for double VLAN mode. Przemyslaw fixes memory corruption issues with VFs by ensuring queues are disabled in the error path of VF queue configuration and to disabled VFs during reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lukas Bulwahn authored
Maintainers of the directory Documentation/devicetree/bindings/net are also the maintainers of the corresponding directory include/dt-bindings/net. Add the file entry for include/dt-bindings/net to the appropriate section in MAINTAINERS. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220613121826.11484-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Oleksij Rempel authored
Latest drivers version requires phy-mode to be set. Otherwise we will use "NA" mode and the switch driver will invalidate this port mode. Fixes: 65ac79e1 ("net: dsa: microchip: add the phylink get_caps") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 14 Jun, 2022 11 commits
-
-
Linus Torvalds authored
Commit e81fb419 ("netfs: Further cleanups after struct netfs_inode wrapper introduced") changed the argument types and names, and actually updated the comment too (although that was thanks to David Howells, not me: my original patch only changed the code). But the comment fixup didn't go quite far enough, and didn't change the argument name in the comment, resulting in include/linux/netfs.h:314: warning: Function parameter or member 'ctx' not described in 'netfs_inode_init' include/linux/netfs.h:314: warning: Excess function parameter 'inode' description in 'netfs_inode_init' during htmldoc generation. Fixes: e81fb419 ("netfs: Further cleanups after struct netfs_inode wrapper introduced") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Przemyslaw Patynowski authored
Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a43 ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Roman Storozhenko authored
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77 ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Michalik authored
The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a749623 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "While last week's pull request contained miscellaneous fixes for x86, this one covers other architectures, selftests changes, and a bigger series for APIC virtualization bugs that were discovered during 5.20 development. The idea is to base 5.20 development for KVM on top of this tag. ARM64: - Properly reset the SVE/SME flags on vcpu load - Fix a vgic-v2 regression regarding accessing the pending state of a HW interrupt from userspace (and make the code common with vgic-v3) - Fix access to the idreg range for protected guests - Ignore 'kvm-arm.mode=protected' when using VHE - Return an error from kvm_arch_init_vm() on allocation failure - A bunch of small cleanups (comments, annotations, indentation) RISC-V: - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry x86-64: - Fix error in page tables with MKTME enabled - Dirty page tracking performance test extended to running a nested guest - Disable APICv/AVIC in cases that it cannot implement correctly" [ This merge also fixes a misplaced end parenthesis bug introduced in commit 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") pointed out by Sean Christopherson ] Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/ * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits) KVM: selftests: Restrict test region to 48-bit physical addresses when using nested KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2 KVM: selftests: Clean up LIBKVM files in Makefile KVM: selftests: Link selftests directly with lib object files KVM: selftests: Drop unnecessary rule for STATIC_LIBS KVM: selftests: Add a helper to check EPT/VPID capabilities KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h KVM: selftests: Refactor nested_map() to specify target level KVM: selftests: Drop stale function parameter comment for nested_map() KVM: selftests: Add option to create 2M and 1G EPT mappings KVM: selftests: Replace x86_page_size with PG_LEVEL_XX KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking KVM: x86: disable preemption while updating apicv inhibition KVM: x86: SVM: fix avic_kick_target_vcpus_fast KVM: x86: SVM: remove avic's broken code that updated APIC ID KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base KVM: x86: document AVIC/APICv inhibit reasons KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 MMIO stale data fixes from Thomas Gleixner: "Yet another hw vulnerability with a software mitigation: Processor MMIO Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too" * tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mmio: Print SMT warning KVM: x86/speculation: Disable Fill buffer clear within guests x86/speculation/mmio: Reuse SRBDS mitigation for SBDS x86/speculation/srbds: Update SRBDS mitigation selection x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data x86/speculation/mmio: Enable CPU Fill buffer clearing on idle x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data x86/speculation: Add a common function for MD_CLEAR mitigation update x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug Documentation: Add documentation for Processor MMIO Stale Data
-
Petr Machata authored
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Brauner authored
When calling setattr_prepare() to determine the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. This is exactly the same for idmapped and non-idmapped mounts and allows callers to pass in the values they want to see written to inode->i_{g,u}id. When group ownership is changed a caller whose fsuid owns the inode can change the group of the inode to any group they are a member of. When searching through the caller's groups we need to use the gid mapped according to the idmapped mount otherwise we will fail to change ownership for unprivileged users. Consider a caller running with fsuid and fsgid 1000 using an idmapped mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the idmapped mount. The caller now requests the gid of the file to be changed to 1000 going through the idmapped mount. In the vfs we will immediately map the requested gid to the value that will need to be written to inode->i_gid and place it in attr->ia_gid. Since this idmapped mount maps 65534 to 1000 we place 65534 in attr->ia_gid. When we check whether the caller is allowed to change group ownership we first validate that their fsuid matches the inode's uid. The inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount. Since the caller's fsuid is 1000 we pass the check. We now check whether the caller is allowed to change inode->i_gid to the requested gid by calling in_group_p(). This will compare the passed in gid to the caller's fsgid and search the caller's additional groups. Since we're dealing with an idmapped mount we need to pass in the gid mapped according to the idmapped mount. This is akin to checking whether a caller is privileged over the future group the inode is owned by. And that needs to take the idmapped mount into account. Note, all helpers are nops without idmapped mounts. New regression test sent to xfstests. Link: https://github.com/lxc/lxd/issues/10537 Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org Fixes: 2f221d6f ("attr: handle idmapped mounts") Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org # 5.15+ CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-
Jonathan Neuschäfer authored
Write "to be operated" instead of "to be operate". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220610072809.352962-1-j.neuschaefer@gmx.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jean-Philippe Brucker authored
The AMD XGbE driver currently counts the number of interrupts assigned to the device by inspecting the pdev->resource array. Since commit a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT core") removed IRQs from this array, the driver now attempts to get all interrupts from 1 to -1U and gives up probing once it reaches an invalid interrupt index. Obtain the number of IRQs with platform_irq_count() instead. Fixes: a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 13 Jun, 2022 12 commits
-
-
Matthew Wilcox (Oracle) authored
If 'n' is so large that it's negative, we might wrap around and mistakenly think that the copy is OK when it's not. Such a copy would probably crash, but just doing the arithmetic in a more simple way lets us detect and refuse this case. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220612213227.3881769-4-willy@infradead.org
-
Matthew Wilcox (Oracle) authored
Get rid of a lot of annoying casts by setting 'addr' once at the top of the function. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220612213227.3881769-3-willy@infradead.org
-
Matthew Wilcox (Oracle) authored
vmalloc does not allocate a vm_struct for vm_map_ram() areas. That causes us to deny usercopies from those areas. This affects XFS which uses vm_map_ram() for its directories. Fix this by calling find_vmap_area() instead of find_vm_area(). Fixes: 0aef499f ("mm/usercopy: Detect vmalloc overruns") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220612213227.3881769-2-willy@infradead.org
-
Sami Tolvanen authored
RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid RCU state in the cpuidle code path: WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138 ... Call trace: rcu_eqs_enter+0xe4/0x138 rcu_idle_enter+0xa8/0x100 cpuidle_enter_state+0x154/0x3a8 cpuidle_enter+0x3c/0x58 do_idle.llvm.6590768638138871020+0x1f4/0x2ec cpu_startup_entry+0x28/0x2c secondary_start_kernel+0x1b8/0x220 __secondary_switched+0x94/0x98 Instead, call rcu_irq_enter/exit to wake up RCU only when needed and disable interrupts for the entire CFI shadow/module check when we do. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20220531175910.890307-1-samitolvanen@google.com Fixes: cf68fffb ("add support for Clang CFI") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
-
Suman Ghosh authored
Fixes: 6e144b47 (octeontx2-pf: Add support for adaptive interrupt coalescing) Added support for VF interfaces as well. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andy Chiu says: ==================== net: axienet: fix DMA Tx error We ran into multiple DMA TX errors while writing files over a network block device running on top of a DMA-connected AXI Ethernet device on 64-bit RISC-V machines. The errors indicated that the DMA had fetched a null descriptor and we found that the reason for this is that AXI DMA had unexpectedly processed a partially updated tail descriptor pointer. To fix it, we suggest that the driver should use one 64-bit write instead of two 32-bit writes to perform such update if possible. For those archectures where double-word load/stores are unavailable, e.g. 32-bit archectures, force a driver probe failure if the driver finds 64-bit capability on DMA. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Chiu authored
According to commit f735c40e ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Chiu authored
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Wang authored
Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255e ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-