- 17 Jan, 2018 7 commits
-
-
Maciej W. Rozycki authored
commit dc24d0ed upstream. Complement commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") and ensure that no partial register write attempt is made with PTRACE_SETREGSET, as we do not preinitialize any temporaries used to hold incoming register data and consequently random data could be written. It is the responsibility of the caller, such as `ptrace_regset', to arrange for writes to span whole registers only, so here we only assert that it has indeed happened. Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Fixes: 72b22bba ("MIPS: Don't assume 64-bit FP registers for FP regset") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17926/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej W. Rozycki authored
commit a03fe725 upstream. In preparation to fix a commit 72b22bba ("MIPS: Don't assume 64-bit FP registers for FP regset") FCSR access regression factor out NT_PRFPREG regset access helpers for the non-MSA and the MSA variants respectively, to avoid having to deal with excessive indentation in the actual fix. No functional change, however use `target->thread.fpu.fpr[0]' rather than `target->thread.fpu.fpr[i]' for FGR holding type size determination as there's no `i' variable to refer to anymore, and for the factored out `i' variable declaration use `unsigned int' rather than `unsigned' as its type, following the common style. Signed-off-by:
-
Maciej W. Rozycki authored
commit b67336ee upstream. Fix an API loophole introduced with commit 9791554b ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has not been enabled, despite that an executable requesting the mode requested via ELF file annotation would not be allowed to run in the first place, or for n64 and n64 ABI tasks which do not have non-default modes defined at all. Add suitable checks to `mips_set_process_fp_mode' and bail out if an invalid mode change has been requested for the ABI in effect, even if the FPU hardware or emulation would otherwise allow it. Always succeed however without taking any further action if the mode requested is the same as one already in effect, regardless of whether any mode change, should it be requested, would actually be allowed for the task concerned. Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17800/Signed-off-by:
-
Bart Van Assche authored
commit bec40c26 upstream. With the SRP protocol all RDMA operations are initiated by the target. Since no RDMA operations are initiated by the initiator, do not grant the initiator permission to submit RDMA reads or writes to the target. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Wolfgang Grandegger authored
commit d5b42e66 upstream. The "set_bittiming" callback treats a positive return value as error! For that reason "can_changelink()" will quit silently after setting the bittiming values without processing ctrlmode, restart-ms, etc. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Wanpeng Li authored
commit e39d200f upstream. Reported by syzkaller: BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm] Read of size 8 at addr ffff8803259df7f8 by task syz-executor/32298 CPU: 6 PID: 32298 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #18 Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016 Call Trace: dump_stack+0xab/0xe1 print_address_description+0x6b/0x290 kasan_report+0x28a/0x370 write_mmio+0x11e/0x270 [kvm] emulator_read_write_onepage+0x311/0x600 [kvm] emulator_read_write+0xef/0x240 [kvm] emulator_fix_hypercall+0x105/0x150 [kvm] em_hypercall+0x2b/0x80 [kvm] x86_emulate_insn+0x2b1/0x1640 [kvm] x86_emulate_instruction+0x39a/0xb90 [kvm] handle_exception+0x1b4/0x4d0 [kvm_intel] vcpu_enter_guest+0x15a0/0x2640 [kvm] kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall) to the guest memory, however, write_mmio tracepoint always prints 8 bytes through *(u64 *)val since kvm splits the mmio access into 8 bytes. This leaks 5 bytes from the kernel stack (CVE-2017-17741). This patch fixes it by just accessing the bytes which we operate on. Before patch: syz-executor-5567 [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f After patch: syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Suren Baghdasaryan authored
commit fbc7c07e upstream. When system is under memory pressure it is observed that dm bufio shrinker often reclaims only one buffer per scan. This change fixes the following two issues in dm bufio shrinker that cause this behavior: 1. ((nr_to_scan - freed) <= retain_target) condition is used to terminate slab scan process. This assumes that nr_to_scan is equal to the LRU size, which might not be correct because do_shrink_slab() in vmscan.c calculates nr_to_scan using multiple inputs. As a result when nr_to_scan is less than retain_target (64) the scan will terminate after the first iteration, effectively reclaiming one buffer per scan and making scans very inefficient. This hurts vmscan performance especially because mutex is acquired/released every time dm_bufio_shrink_scan() is called. New implementation uses ((LRU size - freed) <= retain_target) condition for scan termination. LRU size can be safely determined inside __scan() because this function is called after dm_bufio_lock(). 2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to determine number of freeable objects in the slab. However dm_bufio always retains retain_target buffers in its LRU and will terminate a scan when this mark is reached. Therefore returning the entire LRU size from dm_bufio_shrink_count() is misleading because that does not represent the number of freeable objects that slab will reclaim during a scan. Returning (LRU size - retain_target) better represents the number of freeable objects in the slab. This way do_shrink_slab() returns 0 when (LRU size < retain_target) and vmscan will not try to scan this shrinker avoiding scans that will not reclaim any memory. Test: tested using Android device running <AOSP>/system/extras/alloc-stress that generates memory pressure and causes intensive shrinker scans Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
- 10 Jan, 2018 23 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This fixes the following much-reported build issue: arch/x86/entry/vdso/vma.c: In function ‘map_vdso’: arch/x86/entry/vdso/vma.c:175:9: error: implicit declaration of function ‘pvclock_pvti_cpu0_va’ on some arches and configurations. Thanks to Guenter for being persistent enough to get it fixed :) Reported-by:Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Borislav Petkov authored
This needs to happen early in kaiser_pagetable_walk(), before the hierarchy is established so that _PAGE_USER permission can be really set. A proper fix would be to teach kaiser_pagetable_walk() to update those permissions but the vsyscall page is the only exception here so ... Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Alexey Dobriyan authored
commit 68ba0326 upstream. Every current KDE system has process named ksysguardd polling files below once in several seconds: $ strace -e trace=open -p $(pidof ksysguardd) Process 1812 attached open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8 open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8 open("/proc/net/dev", O_RDONLY) = 8 open("/proc/net/wireless", O_RDONLY) = -1 ENOENT (No such file or directory) open("/proc/stat", O_RDONLY) = 8 open("/proc/vmstat", O_RDONLY) = 8 Hell knows what it is doing but speed up reading /proc/vmstat by 33%! Benchmark is open+read+close 1.000.000 times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-vmstat Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs): 13146.768464 task-clock (msec) # 0.960 CPUs utilized ( +- 0.60% ) 15 context-switches # 0.001 K/sec ( +- 1.41% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 104 page-faults # 0.008 K/sec ( +- 0.57% ) 45,489,799,349 cycles # 3.460 GHz ( +- 0.03% ) 9,970,175,743 stalled-cycles-frontend # 21.92% frontend cycles idle ( +- 0.10% ) 2,800,298,015 stalled-cycles-backend # 6.16% backend cycles idle ( +- 0.32% ) 79,241,190,850 instructions # 1.74 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 17,616,096,146 branches # 1339.956 M/sec ( +- 0.00% ) 176,106,232 branch-misses # 1.00% of all branches ( +- 0.18% ) 13.691078109 seconds time elapsed ( +- 0.03% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-vmstat Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs): 8688.353749 task-clock (msec) # 0.950 CPUs utilized ( +- 1.25% ) 10 context-switches # 0.001 K/sec ( +- 2.13% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.012 K/sec ( +- 0.56% ) 30,384,010,730 cycles # 3.497 GHz ( +- 0.07% ) 12,296,259,407 stalled-cycles-frontend # 40.47% frontend cycles idle ( +- 0.13% ) 3,370,668,651 stalled-cycles-backend # 11.09% backend cycles idle ( +- 0.69% ) 28,969,052,879 instructions # 0.95 insn per cycle # 0.42 stalled cycles per insn ( +- 0.01% ) 6,308,245,891 branches # 726.058 M/sec ( +- 0.00% ) 214,685,502 branch-misses # 3.40% of all branches ( +- 0.26% ) 9.146081052 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ vsnprintf() is slow because: 1. format_decode() is busy looking for format specifier: 2 branches per character (not in this case, but in others) 2. approximately million branches while parsing format mini language and everywhere 3. just look at what string() does /proc/vmstat is good case because most of its content are strings Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.bySigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Libor Pechacek authored
commit 3205c36c upstream. While most of the locations where a kernel taint bit is set are accompanied with a warning message, there are two which set their bits silently. If the tainting module gets unloaded later on, it is almost impossible to tell what was the reason for setting the flag. Signed-off-by:
Libor Pechacek <lpechacek@suse.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Miroslav Benes authored
commit e0224418 upstream. Currently, percpu symbols from .data..percpu ELF section of a module are not copied over and stored in final symtab array of struct module. Consequently such symbol cannot be returned via kallsyms API (for example kallsyms_lookup_name). This can be especially confusing when the percpu symbol is exported. Only its __ksymtab et al. are present in its symtab. The culprit is in layout_and_allocate() function where SHF_ALLOC flag is dropped for .data..percpu section. There is in fact no need to copy the section to final struct module, because kernel module loader allocates extra percpu section by itself. Unfortunately only symbols from SHF_ALLOC sections are copied due to a check in is_core_symbol(). The patch changes is_core_symbol() function to copy over also percpu symbols (their st_shndx points to .data..percpu ELF section). We do it only if CONFIG_KALLSYMS_ALL is set to be consistent with the rest of the function (ELF section is SHF_ALLOC but !SHF_EXECINSTR). Finally elf_type() returns type 'a' for a percpu symbol because its address is absolute. Signed-off-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Michal Marek authored
commit a78f70e8 upstream. The reference files use spaces to separate tokens, however, we must preserve spaces inside string literals. Currently the only case in the tree is struct edac_raw_error_desc in <linux/edac.h>: $ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes $ mv drivers/edac/amd64_edac.{symtypes,symref} $ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes drivers/edac/amd64_edac.c:527: warning: amd64_get_dram_hole_info: modversion changed because of changes in struct edac_raw_error_desc Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1e547681 upstream. The recent changes for PTI touch cpu_tlbstate from various tlb_flush inlines. cpu_tlbstate is exported as GPL symbol, so this causes a regression when building out of tree drivers for certain graphics cards. Aside of that the export was wrong since it was introduced as it should have been EXPORT_PER_CPU_SYMBOL_GPL(). Use the correct PER_CPU export and drop the _GPL to restore the previous state which allows users to utilize the cards they payed for. As always I'm really thrilled to make this kind of change to support the #friends (or however the hot hashtag of today is spelled) from that closet sauce graphics corp. Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Fixes: 6fd166aa ("x86/mm: Use/Fix PCID to optimize user/kernel switches") Reported-by:
Kees Cook <keescook@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Helge Deller authored
commit 88776c0e upstream. Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9." Those opcodes evaluate to the ldcw() assembly instruction which requires (on 32bit) an alignment of 16 bytes to ensure atomicity. As it turns out, qemu is correct and in our assembly code in entry.S and pacache.S we don't pay attention to the required alignment. This patch fixes the problem by aligning the lock offset in assembly code in the same manner as we do in our C-code. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Tom Lendacky authored
commit f4e9b7af upstream. The size for the Microcode Patch Block (MPB) for an AMD family 17h processor is 3200 bytes. Add a #define for fam17h so that it does not default to 2048 bytes and fail a microcode load/update. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Alice Ferrazzi <alicef@gentoo.org> Signed-off-by:
-
Aaron Ma authored
commit 10d90030 upstream. The touchpad of Lenovo Thinkpad L480 reports it's version as 15. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Vineet Gupta authored
commit 79435ac7 upstream. This used to setup the LP_COUNT register automatically, but now has been removed. There was an earlier fix 3c7c7a2f which fixed instance in delay.h but somehow missed this one as gcc change had not made its way into production toolchains and was not pedantic as it is now ! Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Oleg Nesterov authored
commit 42691579 upstream. complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.comSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Kyle Huey <me@kylehuey.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
Oleg Nesterov authored
commit ac253850 upstream. Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only() signals even if force == T. This simplifies the next change and this matches the same check in get_signal() which will drop these signals anyway. Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.comSigned-off-by:
-
Oleg Nesterov authored
commit 628c1bcb upstream. The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.comSigned-off-by:
-
Thiago Rafael Becker authored
commit bdcf0a42 upstream. In testing, we found that nfsd threads may call set_groups in parallel for the same entry cached in auth.unix.gid, racing in the call of groups_sort, corrupting the groups for that entry and leading to permission denials for the client. This patch: - Make groups_sort globally visible. - Move the call to groups_sort to the modifiers of group_info - Remove the call to groups_sort from set_groups Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.comSigned-off-by:
Thiago Rafael Becker <thiago.becker@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by:
NeilBrown <neilb@suse.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Howells authored
commit 98801506 upstream. Fix the default for fscache_maybe_release_page() for when the cookie isn't valid or the page isn't cached. It mustn't return false as that indicates the page cannot yet be freed. The problem with the default is that if, say, there's no cache, but a network filesystem's pages are using up almost all the available memory, a system can OOM because the filesystem ->releasepage() op will not allow them to be released as fscache_maybe_release_page() incorrectly prevents it. This can be tested by writing a sequence of 512MiB files to an AFS mount. It does not affect NFS or CIFS because both of those wrap the call in a check of PG_fscache and it shouldn't bother Ceph as that only has PG_private set whilst writeback is in progress. This might be an issue for 9P, however. Note that the pages aren't entirely stuck. Removing a file or unmounting will clear things because that uses ->invalidatepage() instead. Fixes: 201a1542 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Tested-by:
-
Stefan Brüns authored
commit e2bf801e upstream. Include the OF-based modalias in the uevent sent when registering devices on the sunxi RSB bus, so that user space has a chance to autoload the kernel module for the device. Fixes a regression caused by commit 3f241bfa ("arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for the AXP803 PMIC is built as a module, it is not loaded and the system ends up with an disfunctional MMC controller. Fixes: d787dcdb ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Eric Biggers authored
commit d76c6810 upstream. pcrypt is using the old way of freeing instances, where the ->free() method specified in the 'struct crypto_template' is passed a pointer to the 'struct crypto_instance'. But the crypto_instance is being kfree()'d directly, which is incorrect because the memory was actually allocated as an aead_instance, which contains the crypto_instance at a nonzero offset. Thus, the wrong pointer was being kfree()'d. Fix it by switching to the new way to free aead_instance's where the ->free() method is specified in the aead_instance itself. Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: 0496f560 ("crypto: pcrypt - Add support for new AEAD interface") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
commit e57121d0 upstream. If the rfc7539 template was instantiated with a hash algorithm with digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the subsequent memory, including 'cryptlen'. This caused a crash during crypto_skcipher_decrypt(). Fix it by, when instantiating the template, requiring that the underlying hash algorithm has the digest size expected for Poly1305. Reproducer: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int algfd, reqfd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "rfc7539(chacha20,sha256)", }; unsigned char buf[32] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (void *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, sizeof(buf)); reqfd = accept(algfd, 0, 0); write(reqfd, buf, 16); read(reqfd, buf, 16); } Reported-by:
-
Jan Engelhardt authored
commit 203f4500 upstream. queue_cache_init is first called for the Control Word Queue (n2_crypto_probe). At that time, queue_cache[0] is NULL and a new kmem_cache will be allocated. If the subsequent n2_register_algs call fails, the kmem_cache will be released in queue_cache_destroy, but queue_cache_init[0] is not set back to NULL. So when the Module Arithmetic Unit gets probed next (n2_mau_probe), queue_cache_init will not allocate a kmem_cache again, but leave it as its bogus value, causing a BUG() to trigger when queue_cache[0] is eventually passed to kmem_cache_zalloc: n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7 n2_crypto: Registered NCS HVAPI version 2.0 called queue_cache_init n2_crypto: md5 alg registration failed n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms. called queue_cache_destroy n2cp: probe of f028687c failed with error -22 n2_crypto: Found NCP at /virtual-devices@100/ncp@6 n2_crypto: Registered NCS HVAPI version 2.0 called queue_cache_init kernel BUG at mm/slab.c:2993! Call Trace: [0000000000604488] kmem_cache_alloc+0x1a8/0x1e0 (inlined) kmem_cache_zalloc (inlined) new_queue (inlined) spu_queue_setup (inlined) handle_exec_unit [0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto] [0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto] [000000000084b174] platform_drv_probe+0x34/0xc0 Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Oleg Nesterov authored
commit 4d957015 upstream. As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check is very wrong, we need time_is_after_jiffies() to make sys_acct() work. Ignoring the overflows, the code should "goto out" if needcheck > jiffies, while currently it checks "needcheck < jiffies" and thus in the likely case check_free_space() does nothing until jiffies overflow. In particular this means that sys_acct() is simply broken, acct_on() sets acct->needcheck = jiffies and expects that check_free_space() should set acct->active = 1 after the free-space check, but this won't happen if jiffies increments in between. This was broken by commit 32dc7308 ("get rid of timer in kern/acct.c") in 2011, then another (correct) commit 795a2f22 ("acct() should honour the limits from the very beginning") made the problem more visible. Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com Fixes: 32dc7308 ("get rid of timer in kern/acct.c") Reported-by:
TSUKADA Koutaro <tsukada@ascade.co.jp> Suggested-by:
-
Andrey Ryabinin authored
commit 063fb3e5 upstream. After kasan_init() executed, no one is allowed to write to kasan_zero_page, so write protect it. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
-
- 05 Jan, 2018 10 commits
-
-
Greg Kroah-Hartman authored
-
Guenter Roeck authored
This resolves a crash if loaded under qemu + haxm under windows. See https://www.spinics.net/lists/kernel/msg2689835.html for details. Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that the same log is also seen with vanilla v4.4.110-rc1). [ 0.712750] Freeing unused kernel memory: 552K [ 0.721821] init: Corrupted page table at address 57b029b332e0 [ 0.722761] PGD 80000000bb238067 PUD bc36a067 PMD bc369067 PTE 45d2067 [ 0.722761] Bad pagetable: 000b [#1] PREEMPT SMP [ 0.722761] Modules linked in: [ 0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] task: ffff8800bc290000 ti: ffff8800bc28c000 task.ti: ffff8800bc28c000 [ 0.722761] RIP: 0010:[<ffffffff83f4129e>] [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP: 0000:ffff8800bc28fcf8 EFLAGS: 00010202 [ 0.722761] RAX: 0000000000000000 RBX: 00000000000001a4 RCX: 00000000000001a4 [ 0.722761] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000057b029b332e0 [ 0.722761] RBP: ffff8800bc28fd08 R08: ffff8800bc290000 R09: ffff8800bb2f4000 [ 0.722761] R10: ffff8800bc290000 R11: ffff8800bb2f4000 R12: 000057b029b332e0 [ 0.722761] R13: 0000000000000000 R14: 000057b029b33340 R15: ffff8800bb1e2a00 [ 0.722761] FS: 0000000000000000(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 [ 0.722761] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.722761] CR2: 000057b029b332e0 CR3: 00000000bb2f8000 CR4: 00000000000006e0 [ 0.722761] Stack: [ 0.722761] 000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c [ 0.722761] ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000 [ 0.722761] ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.722761] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.722761] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.722761] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.722761] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.722761] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.722761] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1 eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17 48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff [ 0.722761] RIP [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP <ffff8800bc28fcf8> [ 0.722761] ---[ end trace def703879b4ff090 ]--- [ 0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21 [ 0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init [ 0.722761] CPU: 1 PID: 1 Comm: init Tainted: G D 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] 0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004 [ 0.722761] ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9 [ 0.722761] ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f34004>] dump_stack+0x4d/0x63 [ 0.722761] [<ffffffff83d57dc9>] ___might_sleep+0x13a/0x13c [ 0.722761] [<ffffffff83d57e6a>] __might_sleep+0x9f/0xa6 [ 0.722761] [<ffffffff84502788>] down_read+0x20/0x31 [ 0.722761] [<ffffffff83cc5d9b>] __blocking_notifier_call_chain+0x35/0x63 [ 0.722761] [<ffffffff83cc5ddd>] blocking_notifier_call_chain+0x14/0x16 [ 0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 0.722761] [<ffffffff83cefe97>] profile_task_exit+0x1a/0x1c [ 0.802309] [<ffffffff83cac84e>] do_exit+0x39/0xe7f [ 0.802309] [<ffffffff83ce5938>] ? vprintk_default+0x1d/0x1f [ 0.802309] [<ffffffff83d7bb95>] ? printk+0x57/0x73 [ 0.802309] [<ffffffff83c46e25>] oops_end+0x80/0x85 [ 0.802309] [<ffffffff83c7b747>] pgtable_bad+0x8a/0x95 [ 0.802309] [<ffffffff83ca7f4a>] __do_page_fault+0x8c/0x352 [ 0.802309] [<ffffffff83eefba5>] ? file_has_perm+0xc4/0xe5 [ 0.802309] [<ffffffff83ca821c>] do_page_fault+0xc/0xe [ 0.802309] [<ffffffff84507682>] page_fault+0x22/0x30 [ 0.802309] [<ffffffff83f4129e>] ? __clear_user+0x42/0x67 [ 0.802309] [<ffffffff83f4127f>] ? __clear_user+0x23/0x67 [ 0.802309] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.802309] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.802309] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.802309] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.802309] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.802309] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.802309] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.802309] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.830559] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.830559] [ 0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 The crash part of this problem may be solved with the following patch (thanks to Hugh for the hint). There is still another problem, though - with this patch applied, the qemu session aborts with "VCPU Shutdown request", whatever that means. Cc: lepton <ytht.net@gmail.com> Signed-off-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 69e0210f upstream. Currently we clear kasan_zero_page before __flush_tlb_all(). This works with current implementation of native_flush_tlb[_global]() because it doesn't cause do any writes to kasan shadow memory. But any subtle change made in native_flush_tlb*() could break this. Also current code seems doesn't work for paravirt guests (lguest). Only after the TLB flush we can be sure that kasan_zero_page is not used as early shadow anymore (instrumented code will not write to it). So it should cleared it only after the TLB flush. Signed-off-by:
-
Andy Lutomirski authored
commit dac16fba upstream. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
-
Andy Lutomirski authored
commit 6b078f5d upstream. The pvclock vdso code was too abstracted to understand easily and excessively paranoid. Simplify it for a huge speedup. This opens the door for additional simplifications, as the vdso no longer accesses the pvti for any vcpu other than vcpu 0. Before, vclock_gettime using kvm-clock took about 45ns on my machine. With this change, it takes 29ns, which is almost as fast as the pure TSC implementation. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
-
Kees Cook authored
Make sure dmesg reports when KPTI is enabled. Signed-off-by:
-
Kees Cook authored
This renames CONFIG_KAISER to CONFIG_PAGE_TABLE_ISOLATION. Signed-off-by:
-
Borislav Petkov authored
... before the first use of kaiser_enabled as otherwise funky things happen: about to get started... (XEN) d0v0 Unhandled page fault fault/trap [#14, ec=0000] (XEN) Pagetable walk from ffff88022a449090: (XEN) L4[0x110] = 0000000229e0e067 0000000000001e0e (XEN) L3[0x008] = 0000000000000000 ffffffffffffffff (XEN) domain_crash_sync called from entry.S: fault at ffff82d08033fd08 entry.o#create_bounce_frame+0x135/0x14d (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.9.1_02-3.21 x86_64 debug=n Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff81007460>] (XEN) RFLAGS: 0000000000000286 EM: 1 CONTEXT: pv guest (d0v0) Signed-off-by:
-
Jiri Kosina authored
Kaiser cannot be used on paravirtualized MMUs (namely reading and writing CR3). This does not work with KAISER as the CR3 switch from and to user space PGD would require to map the whole XEN_PV machinery into both. More importantly, enabling KAISER on Xen PV doesn't make too much sense, as PV guests use distinct %cr3 values for kernel and user already. Signed-off-by:
-
Borislav Petkov authored
Now that the required bits have been addressed, reenable PARAVIRT. Signed-off-by:
-
