- 12 Mar, 2010 40 commits
-
-
Joakim Tjernlund authored
Commit 6846ee5c ("zlib: Fix build of powerpc boot wrapper") made the new optimized inflate only available on arch's that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS. This patch will again enable the optimization for all arch's by defining our own endian independent version of unaligned access. As an added bonus, arch's that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS do a plain load instead. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Russell King authored
The ARM kernel decompressor wants to be able to relocate r/w data independently from the rest of the image, and we do this by ensuring that r/w data has global visibility. Define STATIC_RW_DATA to be empty to achieve this. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alain Knaff <alain@knaff.lu> Cc: <stable@kernel.org> Signed-off-by:
-
Akinobu Mita authored
Replace open-coded loop with for_each_set_bit(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Julia Lawall authored
The variable x is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Stefan observed: The next x = rb_entry(mn->next, struct mmtimer, list); is preceded by a test whether mn->next is NULL. Unless that test is redundant too, your patch fixes a potential NULL pointer dereference, introduced by commit cbacdd95 "SGI Altix mmtimer: allow larger number of timers per node" in 2.6.26. Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Alberto Panizzo authored
This fixes the section mismatch warning for mxc_w1_probe() Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Roel Kluin authored
With `while (++retries < DS2482_WAIT_IDLE_TIMEOUT)' retries reaches DS2482_WAIT_IDLE_TIMEOUT after the loop Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Rodolfo Giometti authored
Function pl010_enable_ms() is automagically called when PPS ldisc is selected. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by:
-
Rodolfo Giometti authored
Automagically function serial8250_enable_ms() is called when PPS ldisc is selected. Signed-off-by:
-
Rodolfo Giometti authored
Adds support, by using the PPS line discipline, for the PPS sources connected with the CD (Carrier Detect) pin of a serial port. [akpm@linux-foundation.org: fix cast size warnings] Signed-off-by:
-
Rodolfo Giometti authored
This new method can be used to init a new struct tty_ldisc_ops as the default tty_ldisc_N_TTY struct. Signed-off-by:
-
Rodolfo Giometti authored
Signed-off-by:
-
Rodolfo Giometti authored
Each PPS source can be registered/deregistered into the system by using special modules called "clients". They simply define the PPS sources' attributes and implement the time signal registration mechanism. This patch adds a special directory for such clients and adds a dummy client that can be useful to test system integrity on real systems. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
FUJITA Tomonori authored
- remove the PCI DMA API description in DMA-API.txt - remove the descriptions of dma_unmap macros since PCI-DMA-mapping.txt has the same description. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
FUJITA Tomonori authored
- replace the PCI DMA API (i.e. pci_dma_*) with the generic DMA API. - make the document more generic (use the PCI specific explanation as an example). [akpm@linux-foundation.org: fix things Randy noticed] Signed-off-by:
-
FUJITA Tomonori authored
We can use pci-dma-compat.h to implement pci_set_dma_mask and pci_set_consistent_dma_mask as we do with the other PCI DMA API. We can remove HAVE_ARCH_PCI_SET_DMA_MASK too. Signed-off-by:
-
FUJITA Tomonori authored
This converts arm to the generic pci_set_dma_mask and pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for dmabounce). Signed-off-by:
-
FUJITA Tomonori authored
This converts powerpc to use the generic pci_set_dma_mask and pci_set_consistent_dma_mask (drivers/pci/pci.c). The generic pci_set_dma_mask does what powerpc's pci_set_dma_mask does. Unlike powerpc's pci_set_consistent_dma_mask, the gneric pci_set_consistent_dma_mask sets only coherent_dma_mask. It doesn't work for powerpc? pci_set_consistent_dma_mask API should set only coherent_dma_mask? Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
FUJITA Tomonori authored
dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask. This is necessary to move to the generic device model DMA API from the PCI bus specific API in the long term. dma_set_coherent_mask works in the exact same way that pci_set_consistent_dma_mask does. So this patch also changes pci_set_consistent_dma_mask to call dma_set_coherent_mask. Signed-off-by:
-
FUJITA Tomonori authored
This changes pci_set_dma_mask to call the generic DMA API, dma_set_mask. pci_set_dma_mask (in drivers/pci/pci.c) does the same things that dma_set_mask does on all the architectures that use pci_set_dma_mask; calls dma_supprted and sets dev->dma_mask. So we safely change pci_set_dma_mask to simply call dma_set_mask. Signed-off-by:
-
FUJITA Tomonori authored
This converts Alpha to use include/linux/pci-dma-compat.h. Alpha is the only architecutre that implements the PCI DMA API in the own way. That makes it difficult to implement the generic DMA API via the PCI bus specific DMA API. The generic DMA API calls the PCI DMA API implementation in arch/alpha/kernel/pci_iommu.c on non Jensen systems. It calls the DMA API in arch/alpha/kernel/pci-noop.c on Jensen systems. Signed-off-by:
-
FUJITA Tomonori authored
This patchset transforms the PCI DMA API into the generic device model. It's one of the reasons why we introduced the generic DMA API long ago; driver writers are always able to use the generic DMA API with any bus instead of using bus specific DMA APIs such as pci_map_single, sbus_map_single, etc (only two bus specific APIs exist now; pci and ssb). Some of the PCI DMA API are already implented on the top of the generic DMA API (include/asm-generic/pci-dma-compat.h). But there are some exceptions. This patchset finishes the transformation. This patch: sparc has two dma_set_mask implementations for 32bit and 64bit. They are same except for the error returned value. We can safely unify them since the error returned value doesn't matter as long as it is negative (as DMA-API.txt describes). This patch also changes dma_set_mask not to call pci_set_dma_mask. Instead, dma_set_mask does the same thing that pci_set_dma_mask does. This change enables ut to change pci_set_dma_mask to call dma_set_mask; we can implement pci_set_dma_mask as pci-dma-compat.h does. Signed-off-by:
David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
FUJITA Tomonori authored
pci_dma_sync_single was obsoleted long ago. All the comments are generic, not architecture specific, simply describes some of the DMA-API (and the same comments are in other files). Documentation/DMA-API.txt have more detailed descriptions. This removes the above obsolete and unnecessary DMA API comments. Let's describe the DMA API in only Documentation/DMA-API.txt. Signed-off-by:
-
FUJITA Tomonori authored
pci_dma_sync_single was obsoleted long ago. All the comments are generic, not architecture specific, simply describes some of the DMA-API (and the same comments are in other files). Documentation/DMA-API.txt have more detailed descriptions. This removes the above obsolete and unnecessary DMA API comments. Let's describe the DMA API in only Documentation/DMA-API.txt. Signed-off-by:
-
FUJITA Tomonori authored
pci_dma_sync_single was obsoleted long ago. All the comments are generic, not architecture specific, simply describes some of the DMA-API (and frv has the same comments in three files). Documentation/DMA-API.txt have more detailed descriptions. This removes the above obsolete and unnecessary DMA API comments. Let's describe the DMA API in only Documentation/DMA-API.txt. Signed-off-by:
-
FUJITA Tomonori authored
Adds the following macros: DECLARE_DMA_UNMAP_ADDR(ADDR_NAME) DECLARE_DMA_UNMAP_LEN(LEN_NAME) dma_unmap_addr(PTR, ADDR_NAME) dma_unmap_addr_set(PTR, ADDR_NAME, VAL) dma_unmap_len(PTR, LEN_NAME) dma_unmap_len_set(PTR, LEN_NAME, VAL) The API corresponds to the pci_unmap state API. We'll move to this new generic API from the PCI specific API in the long term. As include/asm-generic/pci-dma-compat.h does, the pci_unmap API simply calls the new generic API for some time. Signed-off-by:
-
FUJITA Tomonori authored
All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Mikael Starvik <starvik@axis.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Matt Turner <mattst88@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
This patch adds include/linux/pci-dma.h that defines the pci_unmap state API: DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DECLARE_PCI_UNMAP_LEN(LEN_NAME) pci_unmap_addr(PTR, ADDR_NAME) pci_unmap_addr_set(PTR, ADDR_NAME, VAL) pci_unmap_len(PTR, LEN_NAME) pci_unmap_len_set(PTR, LEN_NAME, VAL) This enables us to remove lots of the duplication in architecture implementations since there are only two ways to define the API. If architectures define CONFIG_NEED_DMA_MAP_STATE, they get the real definition of pci_unmap state API. If not, they get the noop definition. In the long term, it's better to replace the API with the generic device model API such as DECLARE_DMA_UNMAP_ADDR. We can map the API to the generic one (like dma-mapping-compat.h does). This patch also makes the migration process easier. We can remove this file after the migration. It might be simpler to add the API to include/linux/pci.h but looks it's already too large. We'll remove pci-dma.h after finishing moving to the generic device model. So I put the API to a separate file. Signed-off-by:
-
