- 06 Dec, 2023 8 commits
-
-
Venkata Prasad Potturu authored
Add i2s bt support for sof-nau8821-max sound card. Signed-off-by:
Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20231206110620.1695591-5-venkataprasad.potturu@amd.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Venkata Prasad Potturu authored
Add sof_bt cpu id and create dailink for i2s bt instance in acp common machine driver. Signed-off-by:
-
Venkata Prasad Potturu authored
Remove extra dmi_product_family entry in amd config entry table. Signed-off-by:
-
Venkata Prasad Potturu authored
Add condition check for acp config flag to load legacy driver only. Signed-off-by:
-
Venkata Prasad Potturu authored
Add sys_vendor and product_name dmi entries for acp5x platform. Signed-off-by:
-
Fabio Estevam authored
Unlike i.MX8MP, i.MX93 has two XCVR interrupts. Describe the two interrupts for the i.MX93 to fix the following dt-schema warning: imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.comSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Header alignment with firmware, addition of new token and partial match filters.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Minor cleanups for machine drivers.
-
- 05 Dec, 2023 4 commits
-
-
Richard Fitzgerald authored
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so that there is a complete logical path to a speaker. There is no particular reason to use multiple speaker widgets. The CS35L56 are designed to work together as a set so they have all been connected to a single speaker widget. Instead of a hardcoded list of codec widget names, the code walks through all the codecs on the dailink and for every cs35l56 it uses its name prefix to construct the source end of the route. This adds a small amount of overhead during probe but has the benefit that it isn't dependent on every system using the same prefixes. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.comSigned-off-by:
-
Rander Wang authored
Driver uses get and set ops to change the power state of dsp core. Closes: https://github.com/thesofproject/sof/issues/8478Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err_probe error message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
Chao Song authored
The RT722 SDCA codec supports 3 data lanes, lane_control_support property has to be set to use additional two lanes. Reviewed-by:
Jack Yu <jack580304@gmail.com> Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
- 04 Dec, 2023 16 commits
-
-
Curtis Malainey authored
Buffer flags have been in firmware for ages but were never fully implemented in the topology/kernel system. This commit finishes off the implementation. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Baofeng Tian authored
sof header file requires these struct with 4 byte aligned, so add same alignment in sof driver definition. Signed-off-by:
Baofeng Tian <baofeng.tian@intel.com> Reviewed-by:
-
Baofeng Tian authored
Add missed definition and align variable names with sof topology header file. Signed-off-by:
-
Bard Liao authored
We use partial match for connecting DAI link and DAI widget. We need to use partial match for disconnecting, too. Fixes: fe887887 ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget") Reviewed-by:
-
Bard Liao authored
'if (!playback)' will not work if the dai is only on capture dai link or is on more than one playback dai links. Check 'if (ctx->headset_codec_dev)' instead. Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
-
Bard Liao authored
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of them use the same dai name. For example, rt712 and rt713 both use "rt712-sdca-aif1" and sof_sdw_rt_sdca_jack_exit(). As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev being put twice. Fixes: 5360c670 ("ASoC: Intel: sof_sdw: add rt712 support") Reviewed-by:
-
Brent Lu authored
The drv_name in enumeration table for ALC5682I-VS codec does not match the board id string in machine driver. Modify the entry of "10EC5682" to enumerate "RTL5682" as well and remove invalid entry. Fixes: 88b4d77d ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec") Reported-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "rpl_nau8825_def" board to reduce the number of rpl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "adl_nau8825_def" board to reduce the number of adl board configs. Reviewed-by:
-
Bard Liao authored
This is a test configuration for UpExtreme with Cirrus Logic CS35L56-EIGHT-C board. The codec layout is configured as: - Link3: CS42L43 Jack - Link0: 2x CS35L56 Speaker (amps 1 and 2) - Link1: 2x CS35L56 Speaker (amps 7 and 8) Signed-off-by: -
Mark Brown authored
Merge series from Hans de Goede <hdegoede@redhat.com>: This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: https://github.com/thesofproject/linux/pull/4112 And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver. Note compared to the pull-request, which deals with the ES8336, this series deals with the ES8316 (for which I have several devices to test on) and this moves handling of the _DSM from the codec driver to the board driver since with the ES8316 the board driver takes care of setting up various routes for things like the mic and speakers. After this series audio now works properly on a CHT Chuwi Hi12 tablet without needing to add an extra quirk for that model. This has also been tested on the following devices, where things are unchanged from before (the ACPI autoconfiguration gives the same results as the old defaults) : Onda V80 plus (CHT) GP-electronic T701 (BYT) I also tested this on a Nanote UMPC-01, here the _DSM result for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while the device actually has 2 speakers, so this model needs to keep its DMI quirk. I don't have an IRBIS NB41 nor a TECLAST X98 Plus II, so the DMI quirks for those are left in place too on a better safe then sorry basis.
-
Hans de Goede authored
Add support for querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing. This avoids the need to add DMI quirks for each new ESS8316 tablet model. This has been tested on the following devices: 1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map, this avoids the need to add a DMI quirk for this model. 2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map, the existing DMI quirk is still necessary because of a bug in the DSM return values for the speakers (it returns mono). 3. Onda V80 plus CHT with mono speaker and IN1-mic-map, DSM set quirks match the previously used defaults. 4. GP-electronic T701 BYT with mono speaker and IN2-mic-map, DSM set quirks match the previously used defaults. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
Add a is_bytcr helper variable to probe(). This is a preparation patch for determining the quirks through querying the ACPI Device-Specific-Method (DSM) on the codec-device. Signed-off-by:
-
Pierre-Louis Bossart authored
Instead of adding DMI quirks for each new tablet model which uses the ESS8316 codec, the plan is to switch to querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing. Call the new es83xx_dsm_dump() helper which logs various basic settings which can be queried through the ACPI DSM method on the codec ACPI device, this is intended to help with developing a DSM based solution to replace most DMI quirks. Signed-off-by:
-
Pierre-Louis Bossart authored
Most of the ES83xx codec configuration is exposed in the DSDT table and accessible via a _DSM method. Start adding basic definitions and helpers to dump the information. Reviewed-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Co-developed-by:
David Yang <yangxiaohua@everest-semi.com> Signed-off-by:
-
Chen-Yu Tsai authored
Commit 014fdeb0 ("ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c") caused a circular dependency between the snd_sof and snd_sof_of modules: depmod: ERROR: Cycle detected: snd_sof -> snd_sof_of -> snd_sof depmod: ERROR: Found 2 modules in dependency cycles! Move the function back with sof_machine_select(). Fixes: 014fdeb0 ("ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Acked-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20231204033549.2020289-1-wenst@chromium.orgSigned-off-by:
-
- 01 Dec, 2023 12 commits
-
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: This series walks over the Cirrus Logic ASoC drivers and clean out the use of legacy GPIO numbers and legacy GPIO APIs. The CS4271 affects an ASoC driver for EP93xx which Nikita is actively working on moving over to device tree, so I don't know about that patch specifically, but I think the collision would be max "the file was deleted". Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> --- Changes in v2: - Add explicit <linux/irq.h> include in the cs35l36 driver, apparently the driver useeed this implicitly through the <linux/gpio.h> include. - Fix commit messages "gpios" -> "reset" on two patches. - Test builds OK - Link to v1: https://lore.kernel.org/r/20231129-descriptors-sound-cirrus-v1-0-31aa74425ff8@linaro.org --- Linus Walleij (10): ASoC: cs35l32: Drop legacy include ASoC: cs35l33: Fix GPIO name and drop legacy include ASoC: cs35l34: Fix GPIO name and drop legacy include ASoC: cs35l35: Drop legacy includes ASoC: cs35l36: Drop legacy includes ASoC: cs4271: Convert to GPIO descriptors ASoC: cirrus: edb93xx: Drop legacy include ASoC: cs42l42: Drop legacy include ASoC: cs43130: Drop legacy includes ASoC: cs4349: Drop legacy include arch/arm/mach-ep93xx/edb93xx.c | 32 +++++++++++++++++++++++++---- arch/arm/mach-ep93xx/vision_ep9307.c | 12 ++++++++++- include/sound/cs4271.h | 1 - sound/soc/cirrus/edb93xx.c | 1 - sound/soc/codecs/cs35l32.c | 1 - sound/soc/codecs/cs35l33.c | 4 +--- sound/soc/codecs/cs35l34.c | 4 +--- sound/soc/codecs/cs35l35.c | 2 -- sound/soc/codecs/cs35l36.c | 3 +-- sound/soc/codecs/cs4271.c | 39 ++++++++++++------------------------ sound/soc/codecs/cs42l42.c | 1 - sound/soc/codecs/cs42l42.h | 2 +- sound/soc/codecs/cs43130.c | 2 -- sound/soc/codecs/cs4349.c | 1 - 14 files changed, 56 insertions(+), 49 deletions(-) --- base-commit: 267aea213ae042f779a8054401a8a5f301518605 change-id: 20231129-descriptors-sound-cirrus-522d9061808e Best regards, -- Linus Walleij <linus.walleij@linaro.org>
-
Krzysztof Kozlowski authored
Add compatibles for sound card on Qualcomm SM8450 and SM8550 boards. The compatibles were already documented. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231201135332.154017-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Sound machine drivers for all newer Qualcomm SoC platforms are the exactly same, therefore it makes sense to use same machine driver for newer platforms as well. Choice of sound topology and user-space Alsa UCM files depends however on card driver name, which must be customized per each board. Allow such customization by using driver match data as sound card driver name. Signed-off-by:
-
Linus Walleij authored
This driver includes the legacy GPIO API <linux/gpio.h> but does not use any symbols from it. Drop the include. Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO API <linux/gpio.h> but does not use any symbols from it. Drop the include. Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO API <linux/gpio.h> but does not use any symbols from it. Drop the include. Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://patchwork.kernel.org/project/alsa-devel/patch/20231122-ep93xx-v5-38-d59a76d5df29@maquefel.me/Acked-by:
-
Linus Walleij authored
This converts the Cirrus CS4271 ASoC codec driver to use GPIO descriptors. It turns out that there are two in-kernel users of the platform data passing mechanism so these are switched over as well. One locally defined GPIO "gpio_disabled" is declared in the state struct but completely unused in the driver, so we delete it. Reviewed-by:
-
Linus Walleij authored
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: c1124c09 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.") Acked-by:
-
Linus Walleij authored
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Acked-by:
-
