Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add documentation for the S3C24XX style CPUFREQ driver.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add IO bank timing support for S3C2412/S3C2443.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Currently map-base.h defines the main virtual address mappings made
for all the support S3C SoC series, but does not then define any base
for per-cpu mappings to be made from.

Add S3C_ADDR_CPU() macro to define an virtual address as an offset
from the last of the core mappings.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Header to define the standard registers for an
PL093 SSMC memory controller.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add core support for frequency scaling on the S3C2412 SoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add CPU frequency scalling support to the Simtec Osiris.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add entries to select the crystal to select for each different
supported board. This information is then available for anything
else requiring this, such as the CPUFreq PLL tables.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add PLL tables for the S3C2440.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add core support for frequency scaling on the S3C2440 SoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add PLL table for the S3C2410 SoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add core support for frequency scaling on the S3C2410 SoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add io-timing support for frequency scaling on the S3C2410 SoC.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add the S3C24XX to the main ARM CPUFreq Kconfig support list.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Move the structure s3c_cpufreq_config from cpu-freq.h to the
less advertised cpu-freq-core.h as it is not needed by anything
outside the core drivers.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc
style documentation.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add the core of the support for enabling the CPUFreq driver on
all S3C24XX based systems.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add definitions and an accessor macro to deal with
reading bus information from S3C2410_BWSCON for any
given numbered bank.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The value of armclk_mask needs to be inverted for use as a mask on
the register value when updating ARM_RATIO.

This is critical for cpufreq support, without it attempts to scale
the frequency of the core trash pretty much the entire clock tree.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

If the requested clock is faster than the parent clock then the
parent clock is the closest we can get to the request so we need
to return that instead of the requested clock.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

In the s3c_gpiolib_getchip implementation for s3c24xx the check whether a pin is
in the gpio banks range is reversed. Thus the function returns NULL for valid
pins and the gpio chip if its not valid.

As a result gpio states are not saved/restored properly during suspend/resume.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits)
  drm/radeon: set fb aperture sizes for framebuffer handoff.
  drm/ttm: fix highuser vs dma32 confusion.
  drm/radeon: Fix size used for benchmarking BO copies.
  drm/radeon: Add radeon.test parameter for running BO GPU copy tests.
  drm/radeon/kms: allow interruptible waits for objects.
  drm/ttm: powerpc: Fix Highmem cache flushing.
  x86: Export kmap_atomic_prot() needed for TTM.
  drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
  drm/ttm: Fix an oops and sync object leak.
  drm/radeon/kms: vram sizing on certain r100 chips needs workaround.
  drm/radeon: Pay more attention to object placement requested by userspace.
  drm/radeon: Fall back to evicting BOs with memcpy if necessary.
  drm/radeon: Don't unreserve twice on failure to validate.
  drm/radeon/kms: fix bandwidth computation on avivo hardware
  drm/radeon/kms: add initial colortiling support.
  drm/radeon/kms: fix hotspot handling on pre-avivo chips
  drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
  drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
  drm/radeon/kms: block RN50 from using 3D engine.
  drm/radeon/kms: fix VRAM sizing like DDX does it.
  ...

* 'zero-length' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Remove zero-length file drivers/char/vr41xx_giu.c

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: accept late unlocking of HPA
  libata: Updates and fixes for pata_at91 driver
  ata_piix: Add new short cable ID
  ata_piix: Add new laptop short cable IDs
  ahci: add device IDs for Ibex Peak ahci controllers
  libata: remove superfluous NULL pointer checks
  libata: add missing NULL pointer check to ata_eh_reset()
  pata_pcmcia: add CNF-CDROM-ID

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: documentation: make it clear that sysfs is optional
  driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails
  Dynamic debug: fix typo: -/->
  driver core: firmware_class:fix memory leak of page pointers array
  sysfs: fix hardlink count on device_move

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: udlfb: Add vmalloc.h include
  staging: remove aten2011 driver
  Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct"
  Staging: serqt_usb2: fix memory leak in error case
  Staging: serqt_usb2: add missing calls to tty_kref_put()

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits)
  USB: xhci: Stall handling bug fixes.
  USB: xhci: Support for 64-byte contexts
  USB: xhci: Always align output device contexts to 64 bytes.
  USB: xhci: Scratchpad buffer allocation
  USB: Fix parsing of SuperSpeed Endpoint Companion descriptor.
  USB: xhci: Fail gracefully if there's no SS ep companion descriptor.
  USB: xhci: Handle babble errors on transfers.
  USB: xhci: Setup HW retries correctly.
  USB: xhci: Check if the host controller died in IRQ handler.
  USB: xhci: Don't oops if the host doesn't halt.
  USB: xhci: Make debugging more verbose.
  USB: xhci: Correct Event Handler Busy flag usage.
  USB: xhci: Handle short control packets correctly.
  USB: xhci: Represent 64-bit addresses with one u64.
  USB: xhci: Use GFP_ATOMIC while holding spinlocks.
  USB: xhci: Deal with stalled endpoints.
  USB: xhci: Set TD size in transfer TRB.
  USB: xhci: fix less- and greater than confusion
  USB: usbtest: no need for USB_DEVICEFS
  USB: musb: fix CONFIGDATA register read issue
  ...

We really don't want to mark the pty as a low-latency device, because as
Alan points out, the ->write method can be called from an IRQ (ppp?),
and that means we can't use ->low_latency=1 as we take mutexes in the
low_latency case.

So rather than using low_latency to force the written data to be pushed
to the ldisc handling at 'write()' time, just make the reader side (or
the poll function) do the flush when it checks whether there is data to
be had.

This also fixes the problem with lost data in an emacs compile buffer
(bugzilla 13815), and we can thus revert the low_latency pty hack
(commit 3a542974: "pty: quickfix for the
pty ENXIO timing problems").
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ Modified to do the tty_flush_to_ldisc() inside input_available_p() so
  that it triggers for both read and poll()  - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This will allow efi/vesa to handoff to radeon.
Signed-off-by: Dave Airlie <airlied@redhat.com>

DMA32 and highmem are sort of exclusive.

Noticed by AndrewR on #radeon.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The incorrect size caused benchmark results to be inflated by a factor of 4.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are
tested across the whole GTT aperture.

This has helped uncover the benchmark copy size bug and verify the maximum
aperture size supported by the AGP bridge in my PowerBook.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Blocking here isn't something the X server mouse appreciates,
avoid the block and let userspace retry the waits.

libdrm_radeon userspace library is also expecting EBUSY not ERESTART
Signed-off-by: Dave Airlie <airlied@redhat.com>

Temporarily maps highmem pages while flushing to get a valid virtual
address to flush.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>