- 12 Jun, 2021 9 commits
-
-
Linus Walleij authored
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changed for v5.14: - set 128bytes FIFO size on uart A - add Banana PI BPI-M5 board dts & bindings - meson-sm1: add toacodec node to use internal audio DAC - enable hdmi audio loopback on VIM3 board * tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: set 128bytes FIFO size on uart A arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add toacodec node arm64: dts: meson: vim3: enable hdmi audio loopback Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.comSigned-off-by:
-
Corentin Labbe authored
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.comSigned-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
Adds welltech,epbx100 as a valid intel-ixp4xx board. Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.comSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Corentin Labbe authored
Add vendor prefix for Welltech computer Co Ld. Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.comSigned-off-by:
-
- 01 Jun, 2021 1 commit
-
-
Neil Armstrong authored
The first UART controller in "Everything-Else" power domain, usually used for Bluetooth HCI has 128bytes FIFO depth. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
-
- 28 May, 2021 4 commits
-
-
Neil Armstrong authored
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header Signed-off-by:
-
Neil Armstrong authored
Add bindings for the Banana PI M5 board. Signed-off-by:
-
Neil Armstrong authored
Add toacodec node for Amlogic SM1 SoCs. Signed-off-by:
-
Jerome Brunet authored
Enable audio capture frontends and a tdm decoder. This makes it possible to loopback the audio played on the hdmi codec, which is the only output interface at the moment. Of course, one TODDR device would be enough to do that but since the 3 FRDDRs are enabled on the playback side, let's do the same on the capture side. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
- 27 May, 2021 15 commits
-
-
Wolfram Sang authored
SW2 on Alt is connected as on Lager board. So, use the same GPIO settings. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210525091512.29119-1-wsa+renesas@sang-engineering.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Suman Anna authored
A number of sub-mailbox node names in various OMAP2+ dts files are currently using underscores. This is not adhering to the node name convention, fix all of these to use hiphens. These nodes are already using the prefix mbox, so they will be in compliance with the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding as well. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Suman Anna authored
The OMAP sub-mailbox used to communicate with the Wakeup M3 remote processor is currently named wkup_m3. This name can be confused with the remote processor node. So, rename this to mbox-wkup-m3 to remove the ambiguity and to also adhere to the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding. Signed-off-by:
-
Suman Anna authored
The OMAP sub-mailbox used to communicate with the DSP and IVA remote processors are currently named after the processor name. These can be confused with the remote processors themselves. Rename them to remove the ambiguity and use the prefix mbox to also adhere to the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding. Signed-off-by:
-
Suman Anna authored
The interrupt-names property is neither defined nor used in either of the OMAP Mailbox binding or the driver. So, drop them. This is in preparation for converting the OMAP Mailbox binding to YAML format. Signed-off-by:
-
Vignesh Raghavendra authored
ti,omap2-uart was kept around to work with legacy omap-serial driver. Now that we have completed move to 8250-omap.c drop legacy compatible. This will simplify writing YAML schema. Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Vignesh Raghavendra authored
ti,omap4-uart was kept around to work with legacy omap-serial driver. Now that we have completed move to 8250-omap.c drop legacy compatible. This will simplify writing YAML schema. Signed-off-by:
-
Grygorii Strashko authored
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by:
-
Grygorii Strashko authored
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by:
-
Geert Uytterhoeven authored
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a 'hog' suffix. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Grygorii Strashko authored
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by:
-
Grygorii Strashko authored
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by:
-
Grygorii Strashko authored
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by:
-
Grygorii Strashko authored
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by:
-
- 25 May, 2021 11 commits
-
-
Geert Uytterhoeven authored
According to Documentation/devicetree/bindings/arm/cpus.yaml, the "enable-method" property should be a property of the individual CPU nodes, and not of the parent "cpus" container node. However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the "cpus" node instead. Secondary CPU bringup and CPU hot (un)plug work regardless, as arm_dt_init_cpu_maps() falls back to looking in the "cpus" node. The cpuidle code does not have such a fallback, so it does not detect the enable-method. Note that cpuidle does not support the "renesas,apmu" enable-method yet, so for now this does not make any difference. Signed-off-by:
-
Adam Ford authored
The RZ/G2 boards expect there to be an external clock reference for USB2 EHCI controllers. For the Beacon boards, this reference clock is controlled by a programmable versaclock. Because the RZ/G2 family has a special clock driver when using an external clock, the third clock reference in the EHCI node needs to point to this special clock, called usb2_clksel. Since the usb2_clksel does not keep the usb_extal clock enabled, the 4th clock entry for the EHCI nodes needs to reference it to keep the clock running and make USB functional. Signed-off-by:
Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.comSigned-off-by:
-
Adam Ford authored
The USB extal clock reference isn't associated to a crystal, it's associated to a programmable clock, so remove the extal reference, add the usb2_clksel. Since usb_extal is referenced by the versaclock, reference it here so the usb2_clksel can get the proper clock speed of 50MHz. Signed-off-by:
-
Geert Uytterhoeven authored
According to the R-Car M1A and H1 Hardware User's Manuals Rev. 1.00, the LSI internal delay for I2C instances 1 to 3 is 5 ns (typ.), which differs from the default 50 ns as specified for instance 0. Signed-off-by:
-
Valentine Barshak authored
This adds X1 clock which supplies a frequency of 148.5 MHz. This clock is connected to the external dot clock input signal. Signed-off-by:
Valentine Barshak <valentine.barshak@cogentembedded.com> [geert: Verified schematics] Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Geert Uytterhoeven authored
Rename "sw2_pins" and "sw2" to "keyboard_pins" resp. "keyboard", to comply with generic name recommendations. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/3d718cf69e21b1ceea0c29c0e841b9bdda44533d.1619785905.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
"make dtbs_check" complains: arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected Change the first clock name to match the DT bindings. This has no effect on actual operation, as the Display Unit driver in Linux does not use the first clock name on R-Car H1, but just grabs the first clock. Fixes: 665d79aa ("ARM: shmobile: marzen: Add DU external pixel clock to DT") Signed-off-by: -
Valentine Barshak authored
The V3MSK board has 2 GiB RAM according to the datasheet and schematics. Signed-off-by:
-
Wolfram Sang authored
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND array and the VCCQ supplies the bus. On Condor, the VCC is connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux to match the bus, which is always operating in 1.8V mode. While at it, deduplicate the pinmux entries, which are now the same for both default and UHS modes. We still need the two pinctrl entries to match the bindings though. Thanks to Marek Vasut for this description from commit 5f65328d ("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB"). Signed-off-by:
-
Niklas Söderlund authored
We need to configure their GPIOs to power on the MAX96712s. Signed-off-by:
-
Adam Ford authored
The AVB reference clock assumes an external clock that runs automatically. Because the Versaclock is wired to provide the AVB refclock, the device tree needs to reference it in order for the driver to start the clock. Signed-off-by:
-
