Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "Three fixes to bugs that cause kernel crash, link error during build,
  and a third to fix kunit_test_init_section_suites() extra indirection
  issue"

* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix kunit_test_init_section_suites(...)
  kunit: fix bug in KUNIT_EXPECT_MEMEQ
  kunit: Export kunit_running()

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of bugfixes is once more for the NXP i.MX platform,
  addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
  imx8dxl power button and the USB modem on an imx7 board.

  The reason that i.MX always shows up here is obviously not that they
  are more buggy than the others, but they have the most boards and are
  good about getting fixes in quickly.

  The other DT fixes are for the Nuvoton wpcm450 flash controller and
  the i2c mux on an ASpeed board.

  Lastly, there are updates to the MAINTAINERS entries for Mediatek,
  AMD/Seattle and NXP SoCs, as well as a lone code fix for error
  handling in the allwinner 'rsb' bus driver"

* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
  MAINTAINERS: Update entry for MediaTek SoC support
  MAINTAINERS: amd: drop inactive Brijesh Singh
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  ARM: dts: aspeed: Fix pca9849 compatible
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

Pull s390 fixes from Heiko Carstens:

 - With CONFIG_VMAP_STACK enabled it is not possible to load the s390
   specific diag288_wdt watchdog module. The reason is that a pointer to
   a string is passed to an inline assembly; this string however is
   located on the stack, while the instruction within the inline
   assembly expects a physicial address. Fix this by copying the string
   to a kmalloc'ed buffer.

 - The diag288_wdt watchdog module does not indicate that it accesses
   memory from an inline assembly, which it does. Add "memory" to the
   clobber list to prevent the compiler from optimizing code incorrectly
   away.

 - Pass size of the uncompressed kernel image to __decompress() call.
   Otherwise the kernel image decompressor may corrupt/overwrite an
   initrd. This was reported to happen on s390 after commit 2aa14b1a
   ("zstd: import usptream v1.5.2").

* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/decompressor: specify __decompress() buf len to avoid overflow
  watchdog: diag288_wdt: fix __diag288() inline assembly
  watchdog: diag288_wdt: do not use stack buffers for hardware data

Merge tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A set of AMD PMF fixes + a few other small fixes"

* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
  platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
  platform/x86/amd: pmc: add CONFIG_SERIO dependency
  platform/x86/amd/pmf: Ensure mutexes are initialized before use
  platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
  platform/x86/amd/pmf: Fix to update SPS default pprof thermals
  platform/x86/amd/pmf: update to auto-mode limits only after AMT event
  platform/x86/amd/pmf: Add helper routine to check pprof is balanced
  platform/x86/amd/pmf: Add helper routine to update SPS thermals

Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com

Pull virtio fixes from Michael Tsirkin:
 "Just small bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa: ifcvf: Do proper cleanup if IFCVF init fails
  vhost-scsi: unbreak any layout for response
  tools/virtio: fix the vringh test for virtio ring changes
  vhost/net: Clear the pending messages when the backend is removed

Pull sound fixes from Takashi Iwai:
 "A bit higher volume of changes than wished, but each change is
  relatively small and the fix targets are mostly device-specific, so
  those should be safe as a late stage merge.

  The most significant LoC is about the memalloc helper fix, which is
  applied only to Xen PV. The other major parts are ASoC Intel SOF and
  AVS fixes that are scattered as various small code changes. The rest
  are device-specific fixes and quirks for HD- and USB-audio, FireWire
  and ASoC AMD / HDMI"

* tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: firewire-motu: fix unreleased lock warning in hwdep device
  ALSA: memalloc: Workaround for Xen PV
  ASoC: cs42l56: fix DT probe
  ASoC: codecs: wsa883x: correct playback min/max rates
  ALSA: hda/realtek: Add Acer Predator PH315-54
  ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022 into DMI table
  ALSA: hda: Do not unset preset when cleaning up codec
  ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure
  ASoC: hdmi-codec: zero clear HDMI pdata
  ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
  ASoC: Intel: sof_ssp_amp: always set dpcm_capture for amplifiers
  ASoC: Intel: sof_nau8825: always set dpcm_capture for amplifiers
  ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers
  ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
  ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
  ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless
  ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform
  ASoC: SOF: keep prepare/unprepare widgets in sink path
  ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL
  ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0
  ...

The Flash Interface Unit (FIU) should have a reference to the Shared
Memory controller (SHM) so that flash access from the host (x86 computer
managed by the WPCM450 BMC) can be blocked during flash access by the
FIU driver.

Fixes: 38abcb0d ("ARM: dts: wpcm450: Add FIU SPI controller node")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230129112611.1176517-1-j.neuschaefer@gmx.netSigned-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201044158.962417-1-joel@jms.id.auSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The linux-mediatek IRC channel has moved to liber.chat for quite some
time. Apart from that, not all patches are also send to LKML, so add
this ML explicitly.

And last but not least:
Angelo does a wunderfull job in reviewing patches for all kind of
devices from MediaTek.

Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230201152256.19514-1-matthias.bgg@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull cgroup fix from Tejun Heo:
 "cpuset has a bug which can cause an oops after some configuration
  operations, introduced during the v6.1 cycle.

  This single commit fixes the bug"

* tag 'cgroup-for-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()

It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].

Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.

Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.

[1] https://www.spinics.net/lists/cgroups/msg36254.html

Fixes: f0af1bfc ("cgroup/cpuset: Relax constraints to partition & cpus changes")
Cc: stable@vger.kernel.org # v6.1
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull SCSI fixes from James Bottomley:
 "Two core fixes.

  One simply moves an annotation from put to release to avoid the
  warning triggering needlessly in alua, but to keep it in case release
  is ever called from that path (which we don't think will happen).

  The other reverts a change to the PQ=1 target scanning behaviour
  that's under intense discussion at the moment"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Revert "scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT"
  scsi: core: Fix the scsi_device_put() might_sleep annotation

Pull media fixes from Mauro Carvalho Chehab:
 "A couple of v4l2 core fixes:

   - fix a regression on strings control support

   - fix a regression for some drivers that depend on an odd streaming
     behavior"

* tag 'media/v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: videobuf2: set q->streaming later
  media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line

Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1a ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.

Link: https://github.com/facebook/zstd/commit/6a7ede3dfccbSigned-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hoursSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.

kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.

Fixes: e5857d39 ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Smatch static analysis tool detects that acquired lock is not released
in hwdep device when condition branch is passed due to no event. It is
unlikely to occur, while fulfilling is preferable for better coding.
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes: 634ec0b2 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230130141540.102854-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

In KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ, add check if one of the
inputs is NULL and fail if this is the case.

Currently, the kernel crashes if one of the inputs is NULL. Instead,
fail the test and add an appropriate error message.

Fixes: b8a926be ("kunit: Introduce KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros")

This was found by the kernel test robot:
https://lore.kernel.org/all/202212191448.D6EDPdOh-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'fscache-fixes-20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache fixes from David Howells:
 "Fix two problems in fscache volume handling:

   - wake_up_bit() is incorrectly paired with wait_var_event(). The
     latter selects the waitqueue to use differently.

   - Missing barriers ordering between state bit and task state"

* tag 'fscache-fixes-20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()
  fscache: Use wait_on_bit() to wait for the freeing of relinquished volume

Merge tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.2, round 2:

- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
- Drop misused 'uart-has-rtscts' from imx8m-venice boards.
- Fix USB host over-current polarity for imx7d-smegw01 board.
- Fix a typo in i.MX8DXL sc_pwrkey property name.
- Fix GPIO watchdog property for i.MX8MM eDM SBC board.
- Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
- Fix configuration of i.MX8MM pad UART1_DTE_RX.

* tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC

Link: https://lore.kernel.org/r/20230130003614.GP20713@T480Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

- Fix error handling in RSB init

* tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

Link: https://lore.kernel.org/r/Y9RWcDdO0nj98KVj@jernej-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Emails to Brijesh Singh bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230127105935.99174-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The DIAG 288 statement consumes an EBCDIC string the address of which is
passed in a register. Use a "memory" clobber to tell the compiler that
memory is accessed within the inline assembly.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data passed to a hardware or a hypervisor interface that
requires V=R can no longer be allocated on the stack.

Use kmalloc() to get memory for a diag288 command.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Reading the thinklight LED brightnes while the LED is on returns
255 (LED_FULL) but we advertise a max_brightness of 1, so this should
be 1 (LED_ON).

Fixes: db5e2a4c ("platform/x86: thinkpad_acpi: Fix max_brightness of thinklight")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230127235723.412864-1-hdegoede@redhat.com

Using the serio subsystem now requires the code to be reachable:

x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'

Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.

Fixes: 8e60615e ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.orgReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

As soon as the first handler or sysfs file is registered
the mutex may get used.

Move the initialization to before any handler registration /
sysfs file creation.

Likewise move the destruction of the mutex to after all
the de-initialization is done.

Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130132554.696025-1-hdegoede@redhat.com

Every power mode of static power slider has its own AC and DC power
settings.

When the power source changes from AC to DC, corresponding DC thermals
were not updated from PMF config store and this leads the system to always
run on AC power settings.

Fix it by registering with power_supply notifier and apply DC settings
upon getting notified by the power_supply handler.

Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

By design PMF static slider will be set to BALANCED during
init, but updating to corresponding thermal values from
the PMF config store was missed, leading to improper settings
getting propagated to PMFW.

Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-5-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Auto-mode thermal limits should be updated only after receiving the AMT
event. But due to a bug in the older commit, these settings were getting
applied during the auto-mode init.

Fix this by removing amd_pmf_set_automode() during auto-mode
initialization.

Fixes: 3f5571d9 ("platform/x86/amd/pmf: Add support for Auto mode feature")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-4-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add helper routine to check if the current platform profile
is balanced mode and remove duplicate code occurrences.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-3-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add helper routine to update the static slider information
and remove the duplicate code occurrences after this change.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-2-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

fscache_create_volume_work() uses wake_up_bit() to wake up the processes
which are waiting for the completion of volume creation. According to
comments in wake_up_bit() and waitqueue_active(), an extra smp_mb() is
needed to guarantee the memory order between FSCACHE_VOLUME_CREATING
flag and waitqueue_active() before invoking wake_up_bit().

Fixing it by using clear_and_wake_up_bit() to add the missing memory
barrier.
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20230113115211.2895845-3-houtao@huaweicloud.com/ # v3

The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.

According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:

 FS-Cache: Potential volume collision new=00000024 old=00000022
 ......
 INFO: task mount:1148 blocked for more than 122 seconds.
       Not tainted 6.1.0-rc6+ #1
 task:mount           state:D stack:0     pid:1148  ppid:1
 Call Trace:
  <TASK>
  __schedule+0x2f6/0xb80
  schedule+0x67/0xe0
  fscache_wait_on_volume_collision.cold+0x80/0x82
  __fscache_acquire_volume+0x40d/0x4e0
  erofs_fscache_register_volume+0x51/0xe0 [erofs]
  erofs_fscache_register_fs+0x19c/0x240 [erofs]
  erofs_fc_fill_super+0x746/0xaf0 [erofs]
  vfs_get_super+0x7d/0x100
  get_tree_nodev+0x16/0x20
  erofs_fc_get_tree+0x20/0x30 [erofs]
  vfs_get_tree+0x24/0xb0
  path_mount+0x2fa/0xa90
  do_mount+0x7c/0xa0
  __x64_sys_mount+0x8b/0xe0
  do_syscall_64+0x30/0x60
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active().

Fixes: 62ab6335 ("fscache: Implement volume registration")
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20230113115211.2895845-2-houtao@huaweicloud.com/ # v3

Pull irq fix from Borislav Petkov:

 - Cleanup the firmware node for the new IRQ MSI domain properly, to
   avoid leaking memory

* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Free the fwnode created by msi_create_device_irq_domain()

Pull x86 fixes from Borislav Petkov:

 - Start checking for -mindirect-branch-cs-prefix clang support too now
   that LLVM 16 will support it

 - Fix a NULL ptr deref when suspending with Xen PV

 - Have a SEV-SNP guest check explicitly for features enabled by the
   hypervisor and fail gracefully if some are unsupported by the guest
   instead of failing in a non-obvious and hard-to-debug way

 - Fix a MSI descriptor leakage under Xen

 - Mark Xen's MSI domain as supporting MSI-X

 - Prevent legacy PIC interrupts from being resent in software by
   marking them level triggered, as they should be, which lead to a NULL
   ptr deref

* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
  acpi: Fix suspend with Xen PV
  x86/sev: Add SEV-SNP guest feature negotiation support
  x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
  x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
  x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

Pull input fixes from Dmitry Torokhov:

 - touchpads on HP 15-* laptops switched back to PS/2 emulation mode

 - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
   responding after resume

* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Clevo PCX0DX to i8042 quirk table
  Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

Pull cxl fixes from Dan Williams:
 "A couple of fixes for bugs introduced during the merge window. One is
  a regression, the other was a bug in the CXL AER handler:

   - Fix a crash regression due to module load order of cxl_pmem.ko

   - Fix wrong register offset read in CXL AER handling path"

* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
  cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment

This reverts commit 7efc3b72.

We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time.  Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.

Commit 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned.  There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.

Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.

It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:

    git ls-files -s |
        grep '^100755' |
        cut -f2 |
        xargs grep -L '^#!'

and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.

Maybe these two are the last ones at least for now.  But I'm sure we'll
be back in a few years, fixing things up again.

Fixes: 8c6789f4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd2 ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>