the buffers when mapping them after the VM had discarded them.
      Thanks to Martin MOKREJŠ for the bug report.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

Reported by: Pavel Kysilka (Bugzilla Bug 5059)

The intelfb driver does not keep resolution set with fbset after
switching to anot console and back.

Steps to reproduce:

  initial options: tty1,tty2 - 1024x768-60
  1) tty1 - fbset after booting (1024x768-60)
  2) tty1 - fbset 800x600-100
  tty1: 800x600-100
  3) swith to tty2, swith to tty1
  tty1: 1024x768-60 (the same resolution as default from kernel booting)

This bug is caused by intelfb unintentionally destroying info->flags in
set_par(). Therefore the flag, FBINFO_MISC_USEREVENT used to notify
fbcon of a mode change was cleared causing the above problem. This bug
though is not intelfb specific, as other drivers may also be affected.

The fix is to save info->flags in a local variable before calling any
of the driver hooks.  A more definitive fix (for post 2.6.13) is to
separate info->flags into one that is set by the driver and another that
is set by core fbdev/fbcon.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Reported by: Pavel Kysilka (Bugzilla Bug 4738)

modprobe of intelfb results in the following error message:

	intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chi
	intelfb: Version 0.9.2
	ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
	allocation failed: out of vmalloc space - use vmalloc=<size> to increase siz
	intelfb: Cannot remap FB region.

This will fail if the graphics aperture size is greater than 128 MB.

Fix is to ioremap only from the beginning of graphics aperture to the
end of the used framebuffer memory.
Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This adds a MOVE_SELF event to inotify.  It is sent whenever the inode
you are watching is moved.  We need this event so that we can catch
something like this:

 - app1:
	watch /etc/mtab

 - app2:
	cp /etc/mtab /tmp/mtab-work
	mv /etc/mtab /etc/mtab~
	mv /tmp/mtab-work /etc/mtab

app1 still thinks it's watching /etc/mtab but it's actually watching
/etc/mtab~.
Signed-off-by: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We are saving the wrong thing in ->last_wd.  We want the wd, not the
return value.
Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This reverts commits

  71db63ac
	[PATCH] increase PCIBIOS_MIN_IO on x86

and

  0b2bfb4e
    ACPI: increase PCIBIOS_MIN_IO on x86

since Lukas Sandströ<lukass@etek.chalmers.se> reports that this breaks
his on-board nvidia audio.

We should re-visit this later. For now we revert the change
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It introduces a repeatable oops in the driver, which is a bigger problem
than the patch tries to solve. From the original description:

    Author: Jamie Lenehan <lenehan@twibble.org>
    Date:   Thu Mar 3 14:41:40 2005 +0200

    [PATCH] dc395x: Fix support for highmem

    From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

    Removes the page_to_virt and maps sg lists dynamically.
    This makes the driver work with highmem pages.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix path name conversion for long filenames when mapchars mount option
was specified at mount time.

Signed-off-by: Steve French (sfrench@us.ibm.com)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix missing entries in search results when very long file names and more
than 50 (or so) of such long search entries in the directory.

FindNext could send corrupt last byte of resume name when resume key was
a few hundred bytes long file name or longer.

Fixes Samba Bug # 2932

Signed-off-by: Steve French (sfrench@us.ibm.com)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Initialize key object ID in inode so that we don't try to remove the inode
when we fail on some checks even before we manage to allocate something.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There was a rather silly and embarrassing typo in the sh _syscall6().
For the syscall ABI we have the trapa value specified as 0x10 + number
of arguments, this was being set incorrectly in the _syscall6() case
which ended up causing some problems for users.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This leaves the issue of whether we should deprecate the whole thing (or
if we should check the whole mmap range, for that matter) open. Just do
the minimal fix for now.

Do not spam syslog each 10 seconds when there is nothing on the wire.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Oops.  I knew I didn't have the physical versus logical cpu identifiers right
when I generated that patch.  It's not nearly as bad as I feared at the time
though.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove unused variable
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a race during initialization with the NAPI softirq
processing by using an RCU approach.

This race was discovered when refill_skbs() was added to
the setup code.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

we could do one thing (see the patch below): i think it would be useful 
to fill up the netlogging skb queue straight at initialization time.  
Especially if netpoll is used for dumping alone, the system might not be 
in a situation to fill up the queue at the point of crash, so better be 
a bit more prepared and keep the pipeline filled.

[ I've modified this to be called earlier - mpm ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add limited retry logic to netpoll_send_skb

Each time we attempt to send, decrement our per-device retry counter.
On every successful send, we reset the counter. 

We delay 50us between attempts with up to 20000 retries for a total of
1 second. After we've exhausted our retries, subsequent failed
attempts will try only once until reset by success.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor netpoll_send_skb restructuring

Restructure to avoid confusing goto and move some bits out of the
retry loop.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suggested by Steven Rostedt, matches his patch included in e100.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes an obvious deadlock in the netpoll code.  netpoll_rx takes the
npinfo->rx_lock.  netpoll_rx is also the only caller of arp_reply (through
__netpoll_rx).  As such, it is not necessary to take this lock.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize npinfo->rx_flags.  The way it stands now, this will have random
garbage, and so will incur a locking penalty even when an rx_hook isn't
registered and we are not active in the netpoll polling code.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are many instances of

	skb->protocol = htons(ETH_P_*);
	skb->protocol = __constant_htons(ETH_P_*);
and
	skb->protocol = *_type_trans(...);

Most of *_type_trans() are already endian-annotated, so, let's shift
attention on other warnings.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Well I've only found one potential cause for the assertion
failure in tcp_mark_head_lost.  First of all, this can only
occur if cnt > 1 since tp->packets_out is never zero here.
If it did hit zero we'd have much bigger problems.

So cnt is equal to fackets_out - reordering.  Normally
fackets_out is less than packets_out.  The only reason
I've found that might cause fackets_out to exceed packets_out
is if tcp_fragment is called from tcp_retransmit_skb with a
TSO skb and the current MSS is greater than the MSS stored
in the TSO skb.  This might occur as the result of an expiring
dst entry.

In that case, packets_out may decrease (line 1380-1381 in
tcp_output.c).  However, fackets_out is unchanged which means
that it may in fact exceed packets_out.

Previously tcp_retrans_try_collapse was the only place where
packets_out can go down and it takes care of this by decrementing
fackets_out.

So we should make sure that fackets_out is reduced by an appropriate
amount here as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have a chek in there to make sure that the name won't overflow
task_struct.comm[], but it's triggering for scsi with lots of HBAs, only
scsi is using single-threaded workqueues which don't append the "/%d"
anyway.

All too hard.  Just kill the BUG_ON.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[ kthread_create() uses vsnprintf() and limits the thing, so no
  actual overflow can actually happen regardless ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even though the changes are minor for the next release an increasing
version number simplifies my support issues.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The workaround for broken device-tree that prevents fan control from
working on recent G5 models need to be "enabled" for machines with
revision 0x37 of the bridge in addition to machines with revision 0x35.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Need to use list_for_entry_safe(), as we're removing items during the
traversal.  list_for_each_entry() uses the first ptr also as an iterator, if
you kfree() it slab takes it, might poison it and then you try to use it to
iterate to the next object in list.

Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix the p-persistence CSMA algorithm which in simplex mode was starting
with a slottime delay before doing anything else as if there was carrier
collision resulting in bad performance on simplex links.
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Yet another hack due to the fact that libata is the only user of SCSI's
->eh_strategy_handler() hook.

 sata_sx4 directly references sg->length to calculate total_len in
pdc20621_dma_prep().  This is incorrect as dma_map_sg() could have
merged multiple sg's into one and, in such case, sg->length doesn't
reflect true size of the entry.  This patch makes it use
sg_dma_len(sg).
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Patch from Ben Dooks

Rename the s3c2410_report_oc() to s3c2410_usb_report_oc()
as this is an usb specific function.
Change port power on the usb-simtec implementation to only
power up the output if both are set, as per the usb 1.1
specification
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>