- 08 Apr, 2019 5 commits
-
-
Jason Gunthorpe authored
These should all go through udata now. Add mlx5_udata_to_mdev to convert a udata into the struct mlx5_ib_dev as these call sites require. Signed-off-by:Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Add new RDMA_NLDEV_ATTR_DEV_PROTOCOL attribute to give ability for UDEV rules create IB device stable names based on link type protocol. The assumption that devices like mlx4 with duality in their link type under one IB device struct won't be allowed in the future. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The sysfs layout is created by CM incorrectly presented RDMA devices with InfiniBand link layer. Layout of such devices represents device tree of connections. By moving CM statistics to be under relevant port of IB device, we will fix the following issues: * Symlink name - It used device name instead of specific identifier. * Target location - It was supposed to point to PCI-ID/infiniband_cm/ instead of PCI-ID/infiniband/ * Target name - It created extra device file under already existing device folder, e.g. mlx5_0/mlx5_0 * Crash during boot with RDMA persistent naming patches. sysfs: cannot create duplicate filename '/class/infiniband_cm/mlx5_0' CPU: 29 PID: 433 Comm: modprobe Not tainted 5.0.0-rc5+ #178 Call Trace: dump_stack+0xcc/0x180 sysfs_warn_dup.cold.3+0x17/0x2d sysfs_do_create_link_sd.isra.2+0xd0/0xf0 device_add+0x7cb/0x1450 device_create_groups_vargs+0x1ae/0x220 device_create+0x93/0xc0 cm_add_one+0x38f/0xf60 [ib_cm] add_client_context+0x167/0x210 [ib_core] enable_device_and_get+0x230/0x3f0 [ib_core] ib_register_device+0x823/0xbf0 [ib_core] __mlx5_ib_add+0x45/0x150 [mlx5_ib] mlx5_ib_add+0x1b3/0x5e0 [mlx5_ib] mlx5_add_device+0x130/0x3a0 [mlx5_core] mlx5_register_interface+0x1a9/0x270 [mlx5_core] do_one_initcall+0x14f/0x5de do_init_module+0x247/0x7c0 load_module+0x4c2f/0x60d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe After this change: [leonro@server ~]$ ls -al /sys/class/infiniband/ibp0s12f0/ports/1/ drwxr-xr-x 2 root root 0 Mar 11 11:17 cm_rx_duplicates drwxr-xr-x 2 root root 0 Mar 11 11:17 cm_rx_msgs drwxr-xr-x 2 root root 0 Mar 11 11:17 cm_tx_msgs drwxr-xr-x 2 root root 0 Mar 11 11:17 cm_tx_retries Fixes: 110cf374 ("infiniband: make cm_device use a struct device and not a kobject.") Signed-off-by:
-
Colin Ian King authored
The check on record->event is always true because the wrong operator is being used, used && instead of || Addresses-Coverity: ("Constant expression result") Fixes: fae7a699 ("opa_vnic: Convert vport_idr to XArray") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Shiraz Saleem authored
Combine contiguous regions of PAGE_SIZE pages into single scatter list entry while building the scatter table for a umem. This minimizes the number of the entries in the scatter list and reduces the DMA mapping overhead, particularly with the IOMMU. Set default max_seg_size in core for IB devices to 2G and do not combine if we exceed this limit. Also, purge npages in struct ib_umem as we now DMA map the umem SGL with sg_nents and npage computation is not needed. Drivers should now be using ib_umem_num_pages(), so fix the last stragglers. Move npages tracking to ib_umem_odp as ODP drivers still need it. Suggested-by:
Jason Gunthorpe <jgg@ziepe.ca> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Acked-by:
Adit Ranadive <aditr@vmware.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Tested-by:
Gal Pressman <galpress@amazon.com> Tested-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
- 04 Apr, 2019 3 commits
-
-
Leon Romanovsky authored
Static global variables are initialized to zero by C standard, there is no need to zero them again. Signed-off-by:
-
Potnuri Bharat Teja authored
On receiving a TERM from tje peer, Host moves the QP to TERMINATE state and then moves the adapter out of RDMA mode. After issuing a TERM, peer issues a CLOSE and at this point of time if the connectivity between peer and host is lost for a significant amount of time, the QP remains in TERMINATE state. Therefore c4iw_modify_qp() needs to initiate a close on entering terminate state. Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Leon Romanovsky authored
Refactor the page fault handler to be more readable and extensible, this cleanup was triggered by the error reported below. The code structure made it unclear to the automatic tools to identify that such a flow is not possible in real life because "requestor != NULL" means that "qp != NULL" too. drivers/infiniband/hw/mlx5/odp.c:1254 mlx5_ib_mr_wqe_pfault_handler() error: we previously assumed 'qp' could be null (see line 1230) Fixes: 08100fad ("IB/mlx5: Add ODP SRQ support") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
- 03 Apr, 2019 7 commits
-
-
Jason Gunthorpe authored
Based on rdma.git for-rc for dependencies. From Dennis Dalessandro: ==================== Here are some code improvement patches and fixes for less serious bugs to TID RDMA than we sent for RC. ==================== * HFI1 updates: IB/hfi1: Implement CCA for TID RDMA protocol IB/hfi1: Remove WARN_ON when freeing expected receive groups IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE IB/hfi1: Add a function to read next expected psn from hardware flow IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA Signed-off-by: -
Kaike Wan authored
Currently, FECN handling is not implemented on TID RDMA expected receive packets and therefore CCA can't be turned on when TID RDMA is enabled. This patch adds the CCA support to TID RDMA protocol by: - modifying FECN RSM rule to include kernel receive contexts - For TID_RDMA READ RESP or TID RDMA ACK packet, a CNP will be sent out if the FECN bit is set. For other TID RDMA packets that generate at least one response packet, the BECN bit will be set in the first response packet - Copying expected packet data to destination buffer when FECN bit is set in the TID RDMA READ RESP or TID RDMA WRITE DATA packet. In this case, the expected packet is received as an eager packet - Handling the TID sequence error for subsequent normal expected packets. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Kaike Wan authored
When PSM user receive context is freed, the expected receive groups allocated by the receive context will also been freed. However, if there are still TID entries in use, the receive groups rcd->tid_full_list or rcd->tid_used_list will not be empty, and thus triggering the WARN_ONs in the function hfi1_free_ctxt_rcv_groups(). Even if the two lists may not be empty, the hfi1 driver will free all TID entries and receive groups associated with the receive context to prevent any resource leakage. Since a clean user application exit is not controlled by the hfi1 driver, this patch will remove the WARN_ONs in hfi1_free_ctxt_rcv_groups(). Reviewed-by:
-
Kaike Wan authored
For expected packet receiving, the hfi1 hardware checks the KDETH PSN automatically. However, when sequence error occurs, the hfi1 driver can check the sequence instead until the hardware flow generation is reloaded. TID RDMA READ and WRITE protocols implement similar software checking mechanisms, but with different flags and different local variables to store next expected PSN. Unify the handling by using only one set of flag and local variable for both TID RDMA READ and WRITE protocols. Reviewed-by:
-
Kaike Wan authored
This patch adds a function to read next expected KDETH PSN from hardware flow to simplify the code. Reviewed-by:
-
Kaike Wan authored
The reference of destination memory region is first obtained when TID RDMA WRITE request is first received on the responder side. This reference is released once all TID RDMA WRITE RESP packets are sent to the requester side, even though not all TID RDMA WRITE DATA packets may have been received. This early release will especially be undesired if the software needs to access the destination memory before the last data packet is received. This patch delays the release of the MR until all TID RDMA DATA packets have been received. A helper function to release the reference is also created to simplify the code. Reviewed-by:
-
Leon Romanovsky authored
Conversion from IDR to XArray missed the fact that idr_alloc() returned index as a return value, this index was saved in port variable and used as query index later on. This caused to the following error. BUG: KASAN: use-after-free in cma_check_port+0x86a/0xa20 [rdma_cm] Read of size 8 at addr ffff888069fde998 by task ucmatose/387 CPU: 3 PID: 387 Comm: ucmatose Not tainted 5.1.0-rc2+ #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x7c/0xc0 print_address_description+0x6c/0x23c ? cma_check_port+0x86a/0xa20 [rdma_cm] kasan_report.cold.3+0x1c/0x35 ? cma_check_port+0x86a/0xa20 [rdma_cm] ? cma_check_port+0x86a/0xa20 [rdma_cm] cma_check_port+0x86a/0xa20 [rdma_cm] rdma_bind_addr+0x11bc/0x1b00 [rdma_cm] ? find_held_lock+0x33/0x1c0 ? cma_ndev_work_handler+0x180/0x180 [rdma_cm] ? wait_for_completion+0x3d0/0x3d0 ucma_bind+0x120/0x160 [rdma_ucm] ? ucma_resolve_addr+0x1a0/0x1a0 [rdma_ucm] ucma_write+0x1f8/0x2b0 [rdma_ucm] ? ucma_open+0x260/0x260 [rdma_ucm] vfs_write+0x157/0x460 ksys_write+0xb8/0x170 ? __ia32_sys_read+0xb0/0xb0 ? trace_hardirqs_off_caller+0x5b/0x160 ? do_syscall_64+0x18/0x3c0 do_syscall_64+0x95/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 381: __kasan_kmalloc.constprop.5+0xc1/0xd0 cma_alloc_port+0x4d/0x160 [rdma_cm] rdma_bind_addr+0x14e7/0x1b00 [rdma_cm] ucma_bind+0x120/0x160 [rdma_ucm] ucma_write+0x1f8/0x2b0 [rdma_ucm] vfs_write+0x157/0x460 ksys_write+0xb8/0x170 do_syscall_64+0x95/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 381: __kasan_slab_free+0x12e/0x180 kfree+0xed/0x290 rdma_destroy_id+0x6b6/0x9e0 [rdma_cm] ucma_close+0x110/0x300 [rdma_ucm] __fput+0x25a/0x740 task_work_run+0x10e/0x190 do_exit+0x85e/0x29e0 do_group_exit+0xf0/0x2e0 get_signal+0x2e0/0x17e0 do_signal+0x94/0x1570 exit_to_usermode_loop+0xfa/0x130 do_syscall_64+0x327/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: <syzbot+2e3e485d5697ea610460@syzkaller.appspotmail.com> Reported-by:
Ran Rozenstein <ranro@mellanox.com> Fixes: 63826753 ("cma: Convert portspace IDRs to XArray") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
- 02 Apr, 2019 1 commit
-
-
Leon Romanovsky authored
port_pd is treated as le32 in declaration and read, fix assignment to be in le32 too. This change fixes the following compilation warnings. drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype] Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by:
Lijun Ou <ouliun@huawei.com> Signed-off-by:
-
- 01 Apr, 2019 8 commits
-
-
Shamir Rabinovitch authored
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by:
-
Shamir Rabinovitch authored
Now that we have the udata passed to all the ib_xxx object destroy APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by:
-
Shamir Rabinovitch authored
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by:
-
Shamir Rabinovitch authored
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will use this to eliminate the dependecy of the drivers in ib_x->uobject pointers. Signed-off-by:
-
Shamir Rabinovitch authored
the Attempt to use the below commit to initialize the ucontext for the uobject destroy path has shown that the below commit is incomplete. Parts were reverted and the ucontext set up in the uverbs_attr_bundle was moved to rdma_lookup_get_uobject which is called from the uobj_get_XXX macros and rdma_alloc_begin_uobject which is called when uobject is created. Fixes: 3d9dfd06 ("IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox authored
Also remove qib_devs_list. Signed-off-by:
-
Matthew Wilcox authored
Also remove hfi1_devs_list. Signed-off-by:
-
- 29 Mar, 2019 7 commits
-
-
Leon Romanovsky authored
There is no need to perform extra comparison after boolean AND. Signed-off-by:
-
Leon Romanovsky authored
Delete structure which is not connected due to removal in commit cited in Fixes line. Fixes: a78e8723 ("RDMA/cma: Remove CM_ID statistics provided by rdma-cm module") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Also fully initialise the qp before storing it in the XArray. Signed-off-by:
-
Matthew Wilcox authored
Change the locking to not disable interrupts as the lookup in interrupt context will not see a freed CQ, thanks to the synchronize_irq() call before freeing the CQ. Signed-off-by:
-
- 28 Mar, 2019 9 commits
-
-
Parav Pandit authored
Add netlink command that enables/disables sharing rdma device among multiple net namespaces. Using rdma tool, $rdma sys set netns shared (default mode) When rdma subsystem netns mode is set to shared mode, rdma devices will be accessible in all net namespaces. Using rdma tool, $rdma sys set netns exclusive When rdma subsystem netns mode is set to exclusive mode, devices will be accessible in only one net namespace at any given point of time. If there are any net namespaces other than default init_net exists, while executing this command, it will fail and mode cannot be changed. To change this mode, netlink command is used instead of sysctl, because netlink command allows to auto load a module. Signed-off-by:
-
Parav Pandit authored
Add an interface via netlink command to query whether rdma devices are shared among multiple net namespaces or not. When using RDMAtool, it can be queried as, $rdma system show netns netns shared Signed-off-by:
-
Parav Pandit authored
Extend ib_device_get_by_index() API to check device access for net namespace for serving netlink commands. Also enforce net ns check on dumpit commands which iterate over all registered rdma devices and which don't call ib_device_get_by_index(). Signed-off-by:
-
Parav Pandit authored
Introduce an API rdma_dev_access_netns() to check whether a rdma device can be accessed from the specified net namespace or not. Use rdma_dev_access_netns() while opening character uverbs, umad network device and also check while rdma cm_id binds to rdma device. Signed-off-by:
-
Parav Pandit authored
Add module parameter to change a sharing mode of ib_core early in the boot process. This parameter helps to those systems where modern up to date rdma tool (iproute2) package may not be available during kernel upgrade cycle. Signed-off-by:
-
Parav Pandit authored
Now that sysfs compatibility layer for non init_net exists, add core port attributes such as pkey and gid table to non init_net ns. Signed-off-by:
-
Parav Pandit authored
Implement compatibility layer sysfs entries of ib_core so that non init_net net namespaces can also discover rdma devices. Each non init_net net namespace has ib_core_device created in it. Such ib_core_device sysfs tree resembles rdma devices found in init_net namespace. This allows discovering rdma devices in multiple non init_net net namespaces via sysfs entries and helpful to rdma-core userspace. Signed-off-by:
-
Parav Pandit authored
This is a preparation patch to provide isolation of rdma device in a network namespace. As first step, make rdma device visible only in init net namespace. Subsequent patch will enable rdma device visibility back in multiple net namespaces using compat ib_core_device device/sysfs tree. Given that the IB subsystem depends on net stack, it needs to be initialized after netdev and since it support devices, it needs to be initialized before the device subsystem; therefore, change initcall sequence to fs_initcall, so that when ib_core is compiled in the kernel image, the right init sequence is followed. Signed-off-by:
-
Parav Pandit authored
In order to support sysfs entries in multiple net namespaces for a rdma device, introduce a ib_core_device whose scope is limited to hold core device and per port sysfs related entries. This is preparation patch so that multiple ib_core_devices in each net namespace can be created in subsequent patch who all can share ib_device. (a) Move sysfs specific fields to ib_core_device. (b) Make sysfs and device life cycle related routines to work on ib_core_device. (c) Introduce and use rdma_init_coredev() helper to initialize coredev fields. Signed-off-by:
-
