Lots of workloads use multiple threads, in which case the file table is
shared between them. This makes getting and putting the ring file
descriptor for each io_uring_enter(2) system call more expensive, as it
involves an atomic get and put for each call.

Similarly to how we allow registering normal file descriptors to avoid
this overhead, add support for an io_uring_register(2) API that allows
to register the ring fds themselves:

1) IORING_REGISTER_RING_FDS - takes an array of io_uring_rsrc_update
   structs, and registers them with the task.
2) IORING_UNREGISTER_RING_FDS - takes an array of io_uring_src_update
   structs, and unregisters them.

When a ring fd is registered, it is internally represented by an offset.
This offset is returned to the application, and the application then
uses this offset and sets IORING_ENTER_REGISTERED_RING for the
io_uring_enter(2) system call. This works just like using a registered
file descriptor, rather than a real one, in an SQE, where
IOSQE_FIXED_FILE gets set to tell io_uring that we're using an internal
offset/descriptor rather than a real file descriptor.

In initial testing, this provides a nice bump in performance for
threaded applications in real world cases where the batch count (eg
number of requests submitted per io_uring_enter(2) invocation) is low.
In a microbenchmark, submitting NOP requests, we see the following
increases in performance:

Requests per syscall	Baseline	Registered	Increase
----------------------------------------------------------------
1			 ~7030K		 ~8080K		+15%
2			~13120K		~14800K		+13%
4			~22740K		~25300K		+11%
Co-developed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix incorrect name reference in comment. ki_filp does not exist in the
struct, but file does.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220224105157.1332353-1-dylany@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is a slight optimisation to be had by calculating the correct pos
pointer inside io_kiocb_update_pos and then using that later.

It seems code size drops by a bit:
000000000000a1b0 0000000000000400 t io_read
000000000000a5b0 0000000000000319 t io_write

vs
000000000000a1b0 00000000000003f6 t io_read
000000000000a5b0 0000000000000310 t io_write
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Update kiocb->ki_pos at execution time rather than in io_prep_rw().
io_prep_rw() happens before the job is enqueued to a worker and so the
offset might be read multiple times before being executed once.

Ensures that the file position in a set of _linked_ SQEs will be only
obtained after earlier SQEs have completed, and so will include their
incremented file position.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_kiocb_ppos is called in both branches, and it seems that the compiler
does not fuse this. Fusing removes a few bytes from loop_rw_iter.

Before:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 0000000000000124 t loop_rw_iter

After:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 000000000000010d t loop_rw_iter
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Avoid testing TIF_NOTIFY_SIGNAL twice by calling task_sigpending()
directly from io_run_task_work_sig()
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/bd7c0495f7656e803e5736708591bb665e6eaacd.1645041650.git.olivier@trillion01.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This makes the io-uring tracepoints consistent. Where it makes sense
the tracepoints start with the following four fields:
- context (ring)
- request
- user_data
- opcode.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-3-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This introduces the __fill_cqe function. This is necessary
to correctly issue the io_uring_complete tracepoint.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-2-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

It's better to use the defined enum stuff not the hardcoded number to
define array.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220206095241.121485-4-haoxu@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

reduce acct->lock lock and unlock in different functions to make the
code clearer.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220206095241.121485-3-haoxu@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

wqe->lock is abused, it now protects acct->work_list, hash stuff,
nr_workers, wqe->free_list and so on. Lets first get the work_list out
of the wqe-lock mess by introduce a specific lock for work list. This
is the first step to solve the huge contension between work insertion
and work consumption.
good thing:
  - split locking for bound and unbound work list
  - reduce contension between work_list visit and (worker's)free_list.

For the hash stuff, since there won't be a work with same file in both
bound and unbound work list, thus they won't visit same hash entry. it
works well to use the new lock to protect hash stuff.

Results:
set max_unbound_worker = 4, test with echo-server:
nice -n -15 ./io_uring_echo_server -p 8081 -f -n 1000 -l 16
(-n connection, -l workload)
before this patch:
Samples: 2M of event 'cycles:ppp', Event count (approx.): 1239982111074
Overhead  Command          Shared Object         Symbol
  28.59%  iou-wrk-10021    [kernel.vmlinux]      [k] native_queued_spin_lock_slowpath
   8.89%  io_uring_echo_s  [kernel.vmlinux]      [k] native_queued_spin_lock_slowpath
   6.20%  iou-wrk-10021    [kernel.vmlinux]      [k] _raw_spin_lock
   2.45%  io_uring_echo_s  [kernel.vmlinux]      [k] io_prep_async_work
   2.36%  iou-wrk-10021    [kernel.vmlinux]      [k] _raw_spin_lock_irqsave
   2.29%  iou-wrk-10021    [kernel.vmlinux]      [k] io_worker_handle_work
   1.29%  io_uring_echo_s  [kernel.vmlinux]      [k] io_wqe_enqueue
   1.06%  iou-wrk-10021    [kernel.vmlinux]      [k] io_wqe_worker
   1.06%  io_uring_echo_s  [kernel.vmlinux]      [k] _raw_spin_lock
   1.03%  iou-wrk-10021    [kernel.vmlinux]      [k] __schedule
   0.99%  iou-wrk-10021    [kernel.vmlinux]      [k] tcp_sendmsg_locked

with this patch:
Samples: 1M of event 'cycles:ppp', Event count (approx.): 708446691943
Overhead  Command          Shared Object         Symbol
  16.86%  iou-wrk-10893    [kernel.vmlinux]      [k] native_queued_spin_lock_slowpat
   9.10%  iou-wrk-10893    [kernel.vmlinux]      [k] _raw_spin_lock
   4.53%  io_uring_echo_s  [kernel.vmlinux]      [k] native_queued_spin_lock_slowpat
   2.87%  iou-wrk-10893    [kernel.vmlinux]      [k] io_worker_handle_work
   2.57%  iou-wrk-10893    [kernel.vmlinux]      [k] _raw_spin_lock_irqsave
   2.56%  io_uring_echo_s  [kernel.vmlinux]      [k] io_prep_async_work
   1.82%  io_uring_echo_s  [kernel.vmlinux]      [k] _raw_spin_lock
   1.33%  iou-wrk-10893    [kernel.vmlinux]      [k] io_wqe_worker
   1.26%  io_uring_echo_s  [kernel.vmlinux]      [k] try_to_wake_up

spin_lock failure from 25.59% + 8.89% =  34.48% to 16.86% + 4.53% = 21.39%
TPS is similar, while cpu usage is from almost 400% to 350%
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220206095241.121485-2-haoxu@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Clang warns:

  fs/io_uring.c:9396:9: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
          return ret;
                 ^~~
  fs/io_uring.c:9373:13: note: initialize the variable 'ret' to silence this warning
          int fd, ret;
                     ^
                      = 0
  1 warning generated.

Just return 0 directly and reduce the scope of ret to the if statement,
as that is the only place that it is used, which is how the function was
before the fixes commit.

Fixes: 1a75fac9a0f9 ("io_uring: avoid ring quiesce while registering/unregistering eventfd")
Link: https://github.com/ClangBuiltLinux/linux/issues/1579Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220207162410.1013466-1-nathan@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

None of the opcodes in io_uring_register use ring quiesce anymore. Hence
io_register_op_must_quiesce always returns false and io_ctx_quiesce is
never called.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-6-usama.arif@bytedance.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

IORING_SETUP_R_DISABLED prevents submitting requests and so there will be
no requests until IORING_REGISTER_ENABLE_RINGS is called. And
IORING_REGISTER_RESTRICTIONS works only before
IORING_REGISTER_ENABLE_RINGS is called. Hence ring quiesce is not needed
for these opcodes.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-5-usama.arif@bytedance.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This is done using the RCU data structure (io_ev_fd). eventfd_async is
moved from io_ring_ctx to io_ev_fd which is RCU protected hence avoiding
ring quiesce which is much more expensive than an RCU lock. The place
where eventfd_async is read is already under rcu_read_lock so there is no
extra RCU read-side critical section needed.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-4-usama.arif@bytedance.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This is done by creating a new RCU data structure (io_ev_fd) as part of
io_ring_ctx that holds the eventfd_ctx.

The function io_eventfd_signal is executed under rcu_read_lock with a
single rcu_dereference to io_ev_fd so that if another thread unregisters
the eventfd while io_eventfd_signal is still being executed, the
eventfd_signal for which io_eventfd_signal was called completes
successfully.

The process of registering/unregistering eventfd is already done under
uring_lock so multiple threads won't enter a race condition while
registering/unregistering eventfd.

With the above approach ring quiesce can be avoided which is much more
expensive then using RCU lock. On the system tested, io_uring_register
with IORING_REGISTER_EVENTFD takes less than 1ms with RCU lock, compared
to 15ms before with ring quiesce.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-3-usama.arif@bytedance.com
[axboe: long line fixups]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The information on whether eventfd is registered is not very useful and
would result in the tracepoint being enclosed in an rcu_readlock in a
later patch that tries to avoid ring quiesce for registering eventfd.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-2-usama.arif@bytedance.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull btrfs fixes from David Sterba:
 "A few more fixes for various problems that have user visible effects
  or seem to be urgent:

   - fix corruption when combining DIO and non-blocking io_uring over
     multiple extents (seen on MariaDB)

   - fix relocation crash due to premature return from commit

   - fix quota deadlock between rescan and qgroup removal

   - fix item data bounds checks in tree-checker (found on a fuzzed
     image)

   - fix fsync of prealloc extents after EOF

   - add missing run of delayed items after unlink during log replay

   - don't start relocation until snapshot drop is finished

   - fix reversed condition for subpage writers locking

   - fix warning on page error"

* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fallback to blocking mode when doing async dio over multiple extents
  btrfs: add missing run of delayed items after unlink during log replay
  btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
  btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
  btrfs: do not start relocation until in progress drops are done
  btrfs: tree-checker: use u64 for item data end to avoid overflow
  btrfs: do not WARN_ON() if we have PageError set
  btrfs: fix lost prealloc extents beyond eof after full fsync
  btrfs: subpage: fix a wrong check on subpage->writers

Pull kvm fixes from Paolo Bonzini:
 "x86 guest:

   - Tweaks to the paravirtualization code, to avoid using them when
     they're pointless or harmful

  x86 host:

   - Fix for SRCU lockdep splat

   - Brown paper bag fix for the propagation of errno"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run
  KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
  KVM: x86: Yield to IPI target vCPU only if it is busy
  x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64
  x86/kvm: Don't waste memory if kvmclock is disabled
  x86/kvm: Don't use PV TLB/yield when mwait is advertised

Pull powerpc fix from Michael Ellerman:
 "Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set.

  Thanks to Murilo Opsfelder Araujo, and Erhard F"

* tag 'powerpc-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set

Pull tracing fixes from Steven Rostedt:

 - Fix sorting on old "cpu" value in histograms

 - Fix return value of __setup() boot parameter handlers

* tag 'trace-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix return value of __setup handlers
  tracing/histogram: Fix sorting on old "cpu" value

Pull input updates from Dmitry Torokhov:

 - a fixup for Goodix touchscreen driver allowing it to work on certain
   Cherry Trail devices

 - a fix for imbalanced enable/disable regulator in Elam touchpad driver
   that became apparent when used with Asus TF103C 2-in-1 dock

 - a couple new input keycodes used on newer keyboards

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  HID: add mapping for KEY_ALL_APPLICATIONS
  HID: add mapping for KEY_DICTATE
  Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
  Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
  Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource
  Input: goodix - use the new soc_intel_is_byt() helper
  Input: samsung-keypad - properly state IOMEM dependency

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (hugetlb, pagemap, and
  userfaultfd), memfd, selftests, and kconfig"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  configs/debug: set CONFIG_DEBUG_INFO=y properly
  proc: fix documentation and description of pagemap
  kselftest/vm: fix tests build with old libc
  memfd: fix F_SEAL_WRITE after shmem huge page allocated
  mm: fix use-after-free when anon vma name is used after vma is freed
  mm: prevent vm_area_struct::anon_name refcount saturation
  mm: refactor vm_area_struct::anon_vma_name usage code
  selftests/vm: cleanup hugetlb file after mremap test

Pull s390 fixes from Vasily Gorbik:

 - Fix HAVE_DYNAMIC_FTRACE_WITH_ARGS implementation by providing correct
   switching between ftrace_caller/ftrace_regs_caller and supplying
   pt_regs only when ftrace_regs_caller is activated.

 - Fix exception table sorting.

 - Fix breakage of kdump tooling by preserving metadata it cannot
   function without.

* tag 's390-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/extable: fix exception table sorting
  s390/ftrace: fix arch_ftrace_get_regs implementation
  s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
  s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE

CONFIG_DEBUG_INFO can't be set by user directly, so set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y instead.

Otherwise, we end up with no debuginfo in vmlinux which is a big no-no
for kernel debugging.

Link: https://lkml.kernel.org/r/20220301202920.18488-1-quic_qiancai@quicinc.comSigned-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since bit 57 was exported for uffd-wp write-protected (commit
fb8e37f3: "mm/pagemap: export uffd-wp protection information"),
fixing it can reduce some unnecessary confusion.

Link: https://lkml.kernel.org/r/20220301044538.3042713-1-yun.zhou@windriver.com
Fixes: fb8e37f3 ("mm/pagemap: export uffd-wp protection information")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Cc: Florian Schmidt <florian.schmidt@nutanix.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Colin Cross <ccross@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The error message when I build vm tests on debian10 (GLIBC 2.28):

    userfaultfd.c: In function `userfaultfd_pagemap_test':
    userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
    in this function); did you mean `MADV_RANDOM'?
      if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
                                         ^~~~~~~~~~~~
                                         MADV_RANDOM

This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.

Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.comSigned-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:

  echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled

the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:

  fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.

That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.

Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict.  Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.

Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.

Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reported-by: wangyong <wang.yong12@zte.com.cn>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: CGEL ZTE <cgel.zte@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When adjacent vmas are being merged it can result in the vma that was
originally passed to madvise_update_vma being destroyed.  In the current
implementation, the name parameter passed to madvise_update_vma points
directly to vma->anon_name and it is used after the call to vma_merge.
In the cases when vma_merge merges the original vma and destroys it,
this might result in UAF.  For that the original vma would have to hold
the anon_vma_name with the last reference.  The following vma would need
to contain a different anon_vma_name object with the same string.  Such
scenario is shown below:

madvise_vma_behavior(vma)
  madvise_update_vma(vma, ..., anon_name == vma->anon_name)
    vma_merge(vma)
      __vma_adjust(vma) <-- merges vma with adjacent one
        vm_area_free(vma) <-- frees the original vma
    replace_vma_anon_name(anon_name) <-- UAF of vma->anon_name

Fix this by raising the name refcount and stabilizing it.

Link: https://lkml.kernel.org/r/20220224231834.1481408-3-surenb@google.com
Link: https://lkml.kernel.org/r/20220223153613.835563-3-surenb@google.com
Fixes: 9a10064f ("mm: add a field to store names for private anonymous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+aa7b3d4b35f9dc46a366@syzkaller.appspotmail.com
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Cross <ccross@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A deep process chain with many vmas could grow really high.  With
default sysctl_max_map_count (64k) and default pid_max (32k) the max
number of vmas in the system is 2147450880 and the refcounter has
headroom of 1073774592 before it reaches REFCOUNT_SATURATED
(3221225472).

Therefore it's unlikely that an anonymous name refcounter will overflow
with these defaults.  Currently the max for pid_max is PID_MAX_LIMIT
(4194304) and for sysctl_max_map_count it's INT_MAX (2147483647).  In
this configuration anon_vma_name refcount overflow becomes theoretically
possible (that still require heavy sharing of that anon_vma_name between
processes).

kref refcounting interface used in anon_vma_name structure will detect a
counter overflow when it reaches REFCOUNT_SATURATED value but will only
generate a warning and freeze the ref counter.  This would lead to the
refcounted object never being freed.  A determined attacker could leak
memory like that but it would be rather expensive and inefficient way to
do so.

To ensure anon_vma_name refcount does not overflow, stop anon_vma_name
sharing when the refcount reaches REFCOUNT_MAX (2147483647), which still
leaves INT_MAX/2 (1073741823) values before the counter reaches
REFCOUNT_SATURATED.  This should provide enough headroom for raising the
refcounts temporarily.

Link: https://lkml.kernel.org/r/20220223153613.835563-2-surenb@google.comSigned-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Cross <ccross@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid mixing strings and their anon_vma_name referenced pointers by
using struct anon_vma_name whenever possible.  This simplifies the code
and allows easier sharing of anon_vma_name structures when they
represent the same name.

[surenb@google.com: fix comment]

Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com
Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.comSigned-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Colin Cross <ccross@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hugepage-mremap test will create a file in a hugetlb filesystem.  In
a default 'run_vmtests' run, the file will contain all the hugetlb
pages.  After the test, the file remains and there are no free hugetlb
pages for subsequent tests.  This causes those hugetlb tests to fail.

Change hugepage-mremap to take the name of the hugetlb file as an
argument.  Unlink the file within the test, and just to be sure remove
the file in the run_vmtests script.

Link: https://lkml.kernel.org/r/20220201033459.156944-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following build failure occurs when CONFIG_PPC_64S_HASH_MMU is not
set:

    arch/powerpc/kernel/setup_64.c: In function ‘setup_per_cpu_areas’:
    arch/powerpc/kernel/setup_64.c:811:21: error: ‘mmu_linear_psize’ undeclared (first use in this function); did you mean ‘mmu_virtual_psize’?
      811 |                 if (mmu_linear_psize == MMU_PAGE_4K)
          |                     ^~~~~~~~~~~~~~~~
          |                     mmu_virtual_psize
    arch/powerpc/kernel/setup_64.c:811:21: note: each undeclared identifier is reported only once for each function it appears in

Move the declaration of mmu_linear_psize outside of
CONFIG_PPC_64S_HASH_MMU ifdef.

After the above is fixed, it fails later with the following error:

    ld: arch/powerpc/kexec/file_load_64.o: in function `.arch_kexec_kernel_image_probe':
    file_load_64.c:(.text+0x1c1c): undefined reference to `.add_htab_mem_range'

Fix that, too, by conditioning add_htab_mem_range() symbol to
CONFIG_PPC_64S_HASH_MMU.

Fixes: 387e220a ("powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215567
Link: https://lore.kernel.org/r/20220301204743.45133-1-muriloo@linux.ibm.com

Pull block fix from Jens Axboe:
 "Just a small UAF fix for blktrace"

* tag 'block-5.17-2022-03-04' of git://git.kernel.dk/linux-block:
  blktrace: fix use after free for struct blk_trace

Pull RISC-V fixes from Palmer Dabbelt:

 - Fixes for a handful of KASAN-related crashes.

 - A fix to avoid a crash during boot for SPARSEMEM &&
   !SPARSEMEM_VMEMMAP configurations.

 - A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.

 - A fix for the K210's device tree to properly populate the interrupt
   map, so hart1 will get interrupts again.

* tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: k210: fix broken IRQs on hart1
  riscv: Fix kasan pud population
  riscv: Move high_memory initialization to setup_bootmem
  riscv: Fix config KASAN && DEBUG_VIRTUAL
  riscv: Fix DEBUG_VIRTUAL false warnings
  riscv: Fix config KASAN && SPARSEMEM && !SPARSE_VMEMMAP
  riscv: Fix is_linear_mapping with recent move of KASAN region

Pull iommu fixes from Joerg Roedel:

 - Fix a double list_add() in Intel VT-d code

 - Add missing put_device() in Tegra SMMU driver

 - Two AMD IOMMU fixes:
     - Memory leak in IO page-table freeing code
     - Add missing recovery from event-log overflow

* tag 'iommu-fixes-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/tegra-smmu: Fix missing put_device() call in tegra_smmu_find
  iommu/vt-d: Fix double list_add when enabling VMD in scalable mode
  iommu/amd: Fix I/O page table memory leak
  iommu/amd: Recover from event log overflow

Pull thermal control fix from Rafael Wysocki:
 "Fix NULL pointer dereference in the thermal netlink interface (Nicolas
  Cavallari)"

* tag 'thermal-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Fix TZ_GET_TRIP NULL pointer dereference

Pull sound fixes from Takashi Iwai:
 "Hopefully the last PR for 5.17, including just a few small changes:
  an additional fix for ASoC ops boundary check and other minor
  device-specific fixes"

* tag 'sound-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: intel_hdmi: Fix reference to PCM buffer address
  ASoC: cs4265: Fix the duplicated control name
  ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min

Pull drm fixes from Dave Airlie:
 "Things are quieting down as expected, just a small set of fixes, i915,
  exynos, amdgpu, vrr, bridge and hdlcd. Nothing scary at all.

  i915:
   - Fix GuC SLPC unset command
   - Fix misidentification of some Apple MacBook Pro laptops as Jasper Lake

  amdgpu:
   - Suspend regression fix

  exynos:
   - irq handling fixes
   - Fix two regressions to TE-gpio handling

  arm/hdlcd:
   - Select DRM_GEM_CMEA_HELPER for HDLCD

  bridge:
   - ti-sn65dsi86: Properly undo autosuspend

  vrr:
   - Fix potential NULL-pointer deref"

* tag 'drm-fixes-2022-03-04' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: fix suspend/resume hang regression
  drm/vrr: Set VRR capable prop only if it is attached to connector
  drm/arm: arm hdlcd select DRM_GEM_CMA_HELPER
  drm/bridge: ti-sn65dsi86: Properly undo autosuspend
  drm/i915: s/JSP2/ICP2/ PCH
  drm/i915/guc/slpc: Correct the param count for unset param
  drm/exynos: Search for TE-gpio in DSI panel's node
  drm/exynos: Don't fail if no TE-gpio is defined for DSI driver
  drm/exynos: gsc: Use platform_get_irq() to get the interrupt
  drm/exynos/fimc: Use platform_get_irq() to get the interrupt
  drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interrupt
  drm/exynos: mixer: Use platform_get_irq() to get the interrupt
  drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interrupt