- 29 Dec, 2023 1 commit
-
-
Jani Nikula authored
Remove some unused declarations probably left behind after some refactoring. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231221105414.1518267-1-jani.nikula@intel.com
-
- 22 Dec, 2023 8 commits
-
-
Jouni Högander authored
We need to configure VSC Select field in video dip ctl if we want to have e.g. colorimetry date in our VSC SDP. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Acked-by:
Shawn Lee <shawn.c.lee@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-8-jouni.hogander@intel.com
-
Jouni Högander authored
VSC SDP sending is taken care by PSR HW and it's not enabled in VIDEO_DIP_CTL when PSR is enabled. Readback of VSC SDP is depending on VSC_SDP being set in intel_crtc_state->infoframes.enabled. In case of PSR setting this flag is taken care by PSR code -> read back PSR configuration before reading VSC SDP otherwise we get pipeconfig mismatch error. Signed-off-by:
-
Jouni Högander authored
Pipe config check is currently ignoring vsc sdp changes completely if psr is enabled. We want to ignore only PSR part of it as there might be changes in colorimetry data. Also read back vsc_sdp when psr is used. Signed-off-by:
-
Jouni Högander authored
Currently colorimetry data is not added for psr1 or non-psr case. Fix this by adding it as needed. Signed-off-by:
-
Jouni Högander authored
There is no specific reason to prepare VSC SDP for PSR case somehow differently. Unify PSR and non-PSR preparation. Signed-off-by:
-
Jouni Högander authored
Colorimetry support is not really a PSR specific thing. Move it to intel_dp struct and use it also when preparing vsc sdp for non-PSR case. Signed-off-by:
-
Jouni Högander authored
There is no really need to have separate vsc for psr usage. Use intel_crtc_state->infoframes.vsc instead. Signed-off-by:
-
Suraj Kandpal authored
Fail repeater authentication step in case RX_INFO indicates HDCP1.x or HDCP2.0/2.1 device is present downstream in repeater topology and content type set by userspace is Type1. --v2 -Fix build error. --v3 -remove mst encoder check as branch device also act as repeater Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
- 20 Dec, 2023 1 commit
-
-
Gustavo Sousa authored
The cdclk tables were introduced with commit 736da811 ("drm/i915: Use literal representation of cdclk tables"). It has been almost 4 years and the divider field was not really used yet. Let's remove it. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124205522.57696-2-gustavo.sousa@intel.com
-
- 19 Dec, 2023 7 commits
-
-
Khaled Almahallawy authored
Using link_status to get DPCD_REV fails when disabling/defaulting phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly. Fixes: 8cdf7271 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by:
-
Khaled Almahallawy authored
Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source tests. v2: rebase v3: - Enable TPS4 only for supported platforms (Jani) - Uppercase in macro names (Jani) - Fix indentation (Jani) - Use drm_warn instead of WARN v4: Disable TPS4 pattern on supported platforms only Bspec: 50482, 50484, 7557 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Khaled Almahallawy authored
Starting from DP2.0 specs, DPCD 248h is renamed LINK_QUAL_PATTERN_SELECT and it has the same values of registers DPCD 10Bh-10Eh. Use the PHY pattern names defined for DPCD 10Bh-10Eh in order to add CP2520 Pattern 3 (TPS4) phy pattern support in the next patch of this series and DP2.1 PHY patterns for future series. v2: rebase Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Nirmoy Das authored
Test like i915_gem_mman_live_selftests/igt_mmap_migrate can cause dmesg spamming. Use ratelimit api to reduce log rate. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7038Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Nirmoy Das authored
Add a function for ratelimitted debug print. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Jani Nikula authored
intel_hdcp_get_repeater_ctl() is supposed to return unsigned register contents. Returning negative error values is unexpected, and none of the callers check for that. Sort of fix the error cases by returning 0. I don't think we should hit these cases anyway, and using 0 for the registers is safer than 0xffffffea (-EINVAL). Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219104746.1065431-2-jani.nikula@intel.com
-
Jani Nikula authored
It's customary to debug log connectors using [CONNECTOR:%d:%s] format. Make the HDCP code follow suit. Signed-off-by:
-
- 18 Dec, 2023 5 commits
-
-
Jouni Högander authored
After switching to directly using dma_fence instead of i915_sw_fence we have left some dead code around intel_atomic_helper->free_list. Remove that dead code. v2: Remove intel_atomic_state->freed as well Signed-off-by:
-
Ville Syrjälä authored
To help with debugging print out the mmio list contained in the DMC firmware. Also highlight the event registers, and whether we're going to disable them or not. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Unlike later platforms TGL/ADLS has the half refresh rate (HRR) event on the main DMC (as opposed to the pipe DMC). Since we're disabling that event on all later platforms already let's do the same on TGL/ADLS as well. There is supposedly a bit somewhere (DMC_CHICKEN on TGL) to make the handler not do anything, but we don't currently have code to frob it. Though that bit should be off by default, the ADL+ experience has shown us that trusting any of this isn't a good idea. So seems safer to just disable all event handlers we know that we don't need. Also the TGL/ADLS DMC firmware is apparently using the wrong event (undelayed vblank) here anyway. It should be using the delayed vblank event instead (like ADL+ firmware does), but they didn't release a firmware fix for this and instead just hacked around this in the Windows driver code :/ v2: Also disable the event on ADLS (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Unlike later platforms TGL has its flip queue event (CLK_MSEC) on the main DMC (as opposed to the pipe DMC). Currently we're doing a second pass to disable that, but let's just follow the same approach as the later platforms and never even enable the event in the first place. Signed-off-by:
-
Ville Syrjälä authored
The pipe DMC seems to be making a mess of things in ADL. Various weird symptoms have been observed such as missing vblank irqs, typicalle happening when using multiple displays. Keep all pipe DMC event handlers disabled until needed (which is never atm). This is also what Windows does on ADL+. We can also drop DG2 from disable_all_flip_queue_events() since on DG2 the pipe DMC is the one that handles the flip queue events. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8685Signed-off-by:
-
- 15 Dec, 2023 1 commit
-
-
Imre Deak authored
Select the HDMI specific PLL clock only for HDMI outputs. Fixes: 62618c7f ("drm/i915/mtl: C20 PLL programming") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
- 13 Dec, 2023 11 commits
-
-
Ville Syrjälä authored
Drop the redundant dev_priv parameters from intel_ddi_compute_min_voltage_level() to make life easier. Signed-off-by:
-
Ville Syrjälä authored
On MTL we need to bump the voltage level to only 1 (not 2) when port clock exceeds 594MHz. Make it so. Signed-off-by:
-
Ville Syrjälä authored
The mess inside intel_ddi_compute_min_voltage_level() is illegible. Clean it up a bit by splitting the internals into per-platform functions. TODO: make it a vfunc? Signed-off-by:
-
Ville Syrjälä authored
Allow MTL to use voltage level 1 for 480MHz cdclk, instead of the voltage level 2 that it's currently using. Signed-off-by:
-
Ville Syrjälä authored
The cdclk->voltage_level if ladders are hard to read, especially as they're written the other way around compared to how bspec lists the limits. Let's rewrite them to use simple arrays that gives us the max cdclk for each voltage level. v2: Bump the jsl/ehl max cdclk in the table to 652.8 MHz to accommodate JSL machines in CI that boot with high cdclk Reviewed-by: -
Ville Syrjälä authored
Currently we have a hardcoded assumption that the cdclk divider (2*cd2x divider) is always 2 when squashing is used. While that is true for all current platforms it might not hold in the future. So eliminate the assumption and calculate the correct divider from the other parameters. v2: s/cd2x divider/cdclk divider/ (Gustavo) s/clock/unsquashed_cdclk/ (Gustavo) Reviewed-by: -
Ville Syrjälä authored
Replace the slightly magic 'size = 16' with a bit more descriptive name. We'll have another user for this value later on. Signed-off-by:
-
Ville Syrjälä authored
cdclk_pll_is_unknown() used ~0 when checking for the "VCO is unknown" value, but the assignment uses -1. They are the same in the end, but let's use the same ~0 form on both sides for consistency. Signed-off-by:
-
Ville Syrjälä authored
Currently async flips are busted when bigjoiner is in use. As a short term fix simply reject async flips in that case. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9769Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Mika Kahola authored
When going through the disconnection flow we don't need to wait for PHY readiness and hence we can skip the wait part. For disabling the function returns false as an indicator that the power is not enabled. After all, we are not even using the return value when Type-C is disconnecting. v2: Cleanup for increased readibility (Imre) BSpec: 65380 For VLK-53734 Signed-off-by:
-
Ankit Nautiyal authored
Currently we get bigjoiner config after the dsc get config, during HW readout. Since dsc_get_config now uses bigjoiner flags/pipes to compute DSC PPS parameter pic_width, this results in a state mismatch when Bigjoiner and DSC are used together. So call get bigjoiner config before calling dsc get config function. Fixes: 8b70b569 ("drm/i915/vdsc: Fill the intel_dsc_get_pps_config function") Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 11 Dec, 2023 2 commits
-
-
Andrzej Hajda authored
Cursor size reduction is not supported since MTL. Signed-off-by:
-
Jani Nikula authored
The eDP 1.5 spec adds a clarification for eDP 1.4x: > For eDP v1.4x, if the Source device chooses the Main-Link rate by way > of DPCD 00100h, the Sink device shall ignore DPCD 00115h[2:0]. We write 0 to DP_LINK_BW_SET (DPCD 100h) even when using DP_LINK_RATE_SET (DPCD 114h). Stop doing that, as it can cause the panel to ignore the rate set method. Moreover, 0 is a reserved value for DP_LINK_BW_SET, and should not be used. v2: Improve the comments (Ville) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9081Tested-by:
Animesh Manna <animesh.manna@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 09 Dec, 2023 2 commits
-
-
Ville Syrjälä authored
Since flip_done_handler() is always called from the irq handler we can skip the irqsave/restore dance. Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com>
-
Ville Syrjälä authored
Assuming crtc->state is pointing at the correct thing for the async flip commit is nonsense. If we had already queued up multiple commits this would point at the very lates crtc state even if the older commits hadn't even happened yet. Instead properly stage/arm the event like we do for async flips. Since we don't need to arm multiple of these at the same time we don't need a list like the normal vblank even processing uses. Signed-off-by:
-
- 08 Dec, 2023 2 commits
-
-
Radhakrishna Sripada authored
With the cleanup of the misleading clock value to avoid extra calculations to convert between link_bit_rate and clock, use one standard "clock" field for the c20 pll which works with crtc_state->port_clock field. Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
The field link_bit_rate serves as the actual clock value for the C20 pll_state structure. Remove the misleading clock field. The subsequent patch would rename the link_bit_rate as the clock field. Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
